diff options
Diffstat (limited to 'usrp/firmware/src/common/usrp_common.c')
| -rw-r--r-- | usrp/firmware/src/common/usrp_common.c | 109 |
1 files changed, 0 insertions, 109 deletions
diff --git a/usrp/firmware/src/common/usrp_common.c b/usrp/firmware/src/common/usrp_common.c deleted file mode 100644 index 0998653c2..000000000 --- a/usrp/firmware/src/common/usrp_common.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * USRP - Universal Software Radio Peripheral - * - * Copyright (C) 2003 Free Software Foundation, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA - */ - -/* - * common code for USRP - */ - -#include "usrp_common.h" - -void init_board (void); - -void -init_usrp (void) -{ - CPUCS = bmCLKSPD1; // CPU runs @ 48 MHz - CKCON = 0; // MOVX takes 2 cycles - - // IFCLK is generated internally and runs at 48 MHz; GPIF "master mode" - - IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE | bmIFCLKPOL | bmIFGPIF; - SYNCDELAY; - - // configure IO ports (B and D are used by GPIF) - - IOA = bmPORT_A_INITIAL; // Port A initial state - OEA = bmPORT_A_OUTPUTS; // Port A direction register - - IOC = bmPORT_C_INITIAL; // Port C initial state - OEC = bmPORT_C_OUTPUTS; // Port C direction register - - IOE = bmPORT_E_INITIAL; // Port E initial state - OEE = bmPORT_E_OUTPUTS; // Port E direction register - - - // REVCTL = bmDYN_OUT | bmENH_PKT; // highly recommended by docs - // SYNCDELAY; - - // configure end points - - EP1OUTCFG = bmVALID | bmBULK; SYNCDELAY; - EP1INCFG = bmVALID | bmBULK | bmIN; SYNCDELAY; - - EP2CFG = bmVALID | bmBULK | bmQUADBUF; SYNCDELAY; // 512 quad bulk OUT - EP4CFG = 0; SYNCDELAY; // disabled - EP6CFG = bmVALID | bmBULK | bmQUADBUF | bmIN; SYNCDELAY; // 512 quad bulk IN - EP8CFG = 0; SYNCDELAY; // disabled - - // reset FIFOs - - FIFORESET = bmNAKALL; SYNCDELAY; - FIFORESET = 2; SYNCDELAY; - // FIFORESET = 4; SYNCDELAY; - FIFORESET = 6; SYNCDELAY; - // FIFORESET = 8; SYNCDELAY; - FIFORESET = 0; SYNCDELAY; - - // configure end point FIFOs - - // let core see 0 to 1 transistion of autoout bit - - EP2FIFOCFG = bmWORDWIDE; SYNCDELAY; - EP2FIFOCFG = bmAUTOOUT | bmWORDWIDE; SYNCDELAY; - EP6FIFOCFG = bmAUTOIN | bmWORDWIDE; SYNCDELAY; - - - // prime the pump - -#if 0 - EP2BCL = 0x80; SYNCDELAY; - EP2BCL = 0x80; SYNCDELAY; - EP2BCL = 0x80; SYNCDELAY; - EP2BCL = 0x80; SYNCDELAY; -#endif - - EP0BCH = 0; SYNCDELAY; - - // arm EP1OUT so we can receive "out" packets (TRM pg 8-8) - - EP1OUTBC = 0; SYNCDELAY; - - EP2GPIFFLGSEL = 0x01; SYNCDELAY; // For EP2OUT, GPIF uses EF flag - EP6GPIFFLGSEL = 0x02; SYNCDELAY; // For EP6IN, GPIF uses FF flag - - // set autoin length for EP6 - // FIXME should be f(enumeration) - - EP6AUTOINLENH = (512) >> 8; SYNCDELAY; // this is the length for high speed - EP6AUTOINLENL = (512) & 0xff; SYNCDELAY; - - init_board (); -} - |