diff options
Diffstat (limited to 'gr-sounder')
29 files changed, 2542 insertions, 0 deletions
diff --git a/gr-sounder/Makefile.am b/gr-sounder/Makefile.am new file mode 100644 index 000000000..a5aff2225 --- /dev/null +++ b/gr-sounder/Makefile.am @@ -0,0 +1,24 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +include $(top_srcdir)/Makefile.common + +SUBDIRS = src doc diff --git a/gr-sounder/README b/gr-sounder/README new file mode 100644 index 000000000..ef495f1e8 --- /dev/null +++ b/gr-sounder/README @@ -0,0 +1,61 @@ +This is a work-in-progress implementation of a m-sequence based channel +sounder for GNU Radio and the USRP. + +At present, only the transmitter is implemented. When completed, you +will be able to place the sounder transmitter at one location, the +sounder receiver at another location, then determine in real-time the +channel impulse and frequency response between them. + +The sounder uses a custom FPGA bitstream that is able to generate and +receive a sounder waveform across a full 32 MHz wide swath of RF spectrum; +the waveform generation and impulse response processing occur in logic in +the USRP FPGA and not in the host PC. This avoids the USB throughput +bottleneck entirely. Unfortunately, there is still roll-off in the AD9862 +digital up-converter interpolation filter that impacts the outer 20% of +bandwidth, but this can be compensated for by measuring and subtracting +out this response during calibration. + +The sounder is based on sending a maximal-length PN code modulated as BPSK +with the supplied center frequency, with a chip-rate of 32 MHz. The +receiver (partially implemented at this time but not working yet) correlates +the received signal across all phases of the PN code and outputs an impulse +response vector. As auto-correlation of an m-sequence is near zero for +any relative phase shift, the actual measured energy at a particular +phase shift is related to the impulse response for that time delay. This +is the same principle used in spread-spectrum RAKE receivers such as are +used with GPS and CDMA. + +The transmitter and receiver are designed to work only with the board in +side A. This may be a standalone LFTX/LFRX or an RFX daughterboard. + +To use, the following script is installed into $prefix/bin: + +usage: usrp_sounder.py [options] + +options: + -h, --help show this help message and exit + -f FREQ, --frequency=FREQ + set frequency to FREQ in Hz, default is 0.0 + -t, --transmit enable sounding transmitter + -r, --receive enable sounding receiver + -d DEGREE, --degree=DEGREE + set souding sequence degree (len=2^degree-1), default + is 16 + -n SAMPLES, --samples=SAMPLES + number of samples to capture on receive, default is + infinite + -l, --loopback enable digital loopback, default is disabled + +To use with an LFTX board, set the center frequency to 16M: + +$ usrp_sounder.py -f 16M -t + +You can vary the m-sequence degree between 1 and 16, which will create +sequence lengths between 1 (DC) and 65535 (1.023 us). This will affect +how frequently the receiver can calculate impulse response vectors (to be +documented as the receiver is completed.) + +Johnathan Corgan +Corgan Enterprises LLC +jcorgan@corganenterprises.com +4/25/07 diff --git a/gr-sounder/doc/Makefile.am b/gr-sounder/doc/Makefile.am new file mode 100644 index 000000000..623c403e0 --- /dev/null +++ b/gr-sounder/doc/Makefile.am @@ -0,0 +1,23 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +include $(top_srcdir)/Makefile.common + diff --git a/gr-sounder/src/Makefile.am b/gr-sounder/src/Makefile.am new file mode 100644 index 000000000..71787e849 --- /dev/null +++ b/gr-sounder/src/Makefile.am @@ -0,0 +1,24 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +include $(top_srcdir)/Makefile.common + +SUBDIRS = fpga lib python diff --git a/gr-sounder/src/fpga/Makefile.am b/gr-sounder/src/fpga/Makefile.am new file mode 100644 index 000000000..f4cd4fd42 --- /dev/null +++ b/gr-sounder/src/fpga/Makefile.am @@ -0,0 +1,24 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +include $(top_srcdir)/Makefile.common + +SUBDIRS = top lib rbf diff --git a/gr-sounder/src/fpga/lib/Makefile.am b/gr-sounder/src/fpga/lib/Makefile.am new file mode 100644 index 000000000..450981f1a --- /dev/null +++ b/gr-sounder/src/fpga/lib/Makefile.am @@ -0,0 +1,30 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +include $(top_srcdir)/Makefile.common + +EXTRA_DIST = \ + dac_interface.v \ + dacpll.v \ + sounder.v \ + sounder_rx.v \ + sounder_tx.v + diff --git a/gr-sounder/src/fpga/lib/dac_interface.v b/gr-sounder/src/fpga/lib/dac_interface.v new file mode 100644 index 000000000..b97ffa77f --- /dev/null +++ b/gr-sounder/src/fpga/lib/dac_interface.v @@ -0,0 +1,60 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +`include "../top/config.vh" + +module dac_interface(clk_i,rst_i,ena_i,strobe_i,tx_i_i,tx_q_i,tx_data_o,tx_sync_o); + input clk_i; + input rst_i; + input ena_i; + input strobe_i; + + input [15:0] tx_i_i; + input [15:0] tx_q_i; + + output [15:0] tx_data_o; + output tx_sync_o; + +`ifdef TX_RATE_MAX + wire clk128; + reg clk64_d; + reg [15:0] tx_data_o; + + // Create a 128 MHz clock + dacpll pll128(.areset(rst_i),.inclk0(clk_i),.c0(clk128)); + + // Register the clk64 clock in the clk128 domain + always @(posedge clk128) + clk64_d <= clk_i; + + // Register the tx data in the clk128 domain + always @(posedge clk128) + tx_data_o <= clk64_d ? tx_i_i : tx_q_i; + + assign tx_sync_o = clk64_d; + + +`else // !`ifdef TX_RATE_MAX + assign tx_data_o = strobe_i ? tx_q_i : tx_i_i; + assign tx_sync_o = strobe_i; +`endif // !`ifdef TX_RATE_MAX + +endmodule // dac_interface diff --git a/gr-sounder/src/fpga/lib/dacpll.v b/gr-sounder/src/fpga/lib/dacpll.v new file mode 100644 index 000000000..25f584f4f --- /dev/null +++ b/gr-sounder/src/fpga/lib/dacpll.v @@ -0,0 +1,291 @@ +// megafunction wizard: %ALTPLL% +// GENERATION: STANDARD +// VERSION: WM1.0 +// MODULE: altpll + +// ============================================================ +// File Name: dacpll.v +// Megafunction Name(s): +// altpll +// +// Simulation Library Files(s): +// altera_mf +// ============================================================ +// ************************************************************ +// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE! +// +// 7.0 Build 33 02/05/2007 SJ Web Edition +// ************************************************************ + + +//Copyright (C) 1991-2007 Altera Corporation +//Your use of Altera Corporation's design tools, logic functions +//and other software and tools, and its AMPP partner logic +//functions, and any output files from any of the foregoing +//(including device programming or simulation files), and any +//associated documentation or information are expressly subject +//to the terms and conditions of the Altera Program License +//Subscription Agreement, Altera MegaCore Function License +//Agreement, or other applicable license agreement, including, +//without limitation, that your use is for the sole purpose of +//programming logic devices manufactured by Altera and sold by +//Altera or its authorized distributors. Please refer to the +//applicable agreement for further details. + + +// synopsys translate_off +`timescale 1 ps / 1 ps +// synopsys translate_on +module dacpll ( + areset, + inclk0, + c0); + + input areset; + input inclk0; + output c0; + + wire [5:0] sub_wire0; + wire [0:0] sub_wire4 = 1'h0; + wire [0:0] sub_wire1 = sub_wire0[0:0]; + wire c0 = sub_wire1; + wire sub_wire2 = inclk0; + wire [1:0] sub_wire3 = {sub_wire4, sub_wire2}; + + altpll altpll_component ( + .inclk (sub_wire3), + .areset (areset), + .clk (sub_wire0), + .activeclock (), + .clkbad (), + .clkena ({6{1'b1}}), + .clkloss (), + .clkswitch (1'b0), + .configupdate (1'b1), + .enable0 (), + .enable1 (), + .extclk (), + .extclkena ({4{1'b1}}), + .fbin (1'b1), + .fbout (), + .locked (), + .pfdena (1'b1), + .phasecounterselect ({4{1'b1}}), + .phasedone (), + .phasestep (1'b1), + .phaseupdown (1'b1), + .pllena (1'b1), + .scanaclr (1'b0), + .scanclk (1'b0), + .scanclkena (1'b1), + .scandata (1'b0), + .scandataout (), + .scandone (), + .scanread (1'b0), + .scanwrite (1'b0), + .sclkout0 (), + .sclkout1 (), + .vcooverrange (), + .vcounderrange ()); + defparam + altpll_component.clk0_divide_by = 1, + altpll_component.clk0_duty_cycle = 50, + altpll_component.clk0_multiply_by = 2, + altpll_component.clk0_phase_shift = "0000", + altpll_component.compensate_clock = "CLK0", + altpll_component.inclk0_input_frequency = 15625, + altpll_component.intended_device_family = "Cyclone", + altpll_component.lpm_type = "altpll", + altpll_component.operation_mode = "NORMAL", + altpll_component.pll_type = "AUTO", + altpll_component.port_activeclock = "PORT_UNUSED", + altpll_component.port_areset = "PORT_USED", + altpll_component.port_clkbad0 = "PORT_UNUSED", + altpll_component.port_clkbad1 = "PORT_UNUSED", + altpll_component.port_clkloss = "PORT_UNUSED", + altpll_component.port_clkswitch = "PORT_UNUSED", + altpll_component.port_configupdate = "PORT_UNUSED", + altpll_component.port_fbin = "PORT_UNUSED", + altpll_component.port_inclk0 = "PORT_USED", + altpll_component.port_inclk1 = "PORT_UNUSED", + altpll_component.port_locked = "PORT_UNUSED", + altpll_component.port_pfdena = "PORT_UNUSED", + altpll_component.port_phasecounterselect = "PORT_UNUSED", + altpll_component.port_phasedone = "PORT_UNUSED", + altpll_component.port_phasestep = "PORT_UNUSED", + altpll_component.port_phaseupdown = "PORT_UNUSED", + altpll_component.port_pllena = "PORT_UNUSED", + altpll_component.port_scanaclr = "PORT_UNUSED", + altpll_component.port_scanclk = "PORT_UNUSED", + altpll_component.port_scanclkena = "PORT_UNUSED", + altpll_component.port_scandata = "PORT_UNUSED", + altpll_component.port_scandataout = "PORT_UNUSED", + altpll_component.port_scandone = "PORT_UNUSED", + altpll_component.port_scanread = "PORT_UNUSED", + altpll_component.port_scanwrite = "PORT_UNUSED", + altpll_component.port_clk0 = "PORT_USED", + altpll_component.port_clk1 = "PORT_UNUSED", + altpll_component.port_clk3 = "PORT_UNUSED", + altpll_component.port_clk4 = "PORT_UNUSED", + altpll_component.port_clk5 = "PORT_UNUSED", + altpll_component.port_clkena0 = "PORT_UNUSED", + altpll_component.port_clkena1 = "PORT_UNUSED", + altpll_component.port_clkena3 = "PORT_UNUSED", + altpll_component.port_clkena4 = "PORT_UNUSED", + altpll_component.port_clkena5 = "PORT_UNUSED", + altpll_component.port_extclk0 = "PORT_UNUSED", + altpll_component.port_extclk1 = "PORT_UNUSED", + altpll_component.port_extclk2 = "PORT_UNUSED", + altpll_component.port_extclk3 = "PORT_UNUSED"; + + +endmodule + +// ============================================================ +// CNX file retrieval info +// ============================================================ +// Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0" +// Retrieval info: PRIVATE: BANDWIDTH STRING "1.000" +// Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "0" +// Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz" +// Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low" +// Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1" +// Retrieval info: PRIVATE: BANDWIDTH_USE_CUSTOM STRING "0" +// Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0" +// Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0" +// Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0" +// Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0" +// Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0" +// Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0" +// Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0" +// Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0" +// Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "e0" +// Retrieval info: PRIVATE: DEVICE_FAMILY NUMERIC "11" +// Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "8" +// Retrieval info: PRIVATE: DEV_FAMILY STRING "Cyclone" +// Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "1" +// Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000" +// Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0" +// Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1" +// Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "0" +// Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0" +// Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "1048575" +// Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1" +// Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "64.000" +// Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz" +// Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "100.000" +// Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1" +// Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1" +// Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz" +// Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1" +// Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "0" +// Retrieval info: PRIVATE: LOCK_LOSS_SWITCHOVER_CHECK STRING "0" +// Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1" +// Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "512.000" +// Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0" +// Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "deg" +// Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0" +// Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "2" +// Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1" +// Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "100.00000000" +// Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "0" +// Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz" +// Retrieval info: PRIVATE: PHASE_RECONFIG_FEATURE_ENABLED STRING "0" +// Retrieval info: PRIVATE: PHASE_RECONFIG_INPUTS_CHECK STRING "0" +// Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000" +// Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "ns" +// Retrieval info: PRIVATE: PLL_ADVANCED_PARAM_CHECK STRING "0" +// Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "1" +// Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1" +// Retrieval info: PRIVATE: PLL_ENA_CHECK STRING "0" +// Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0" +// Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0" +// Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0" +// Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0" +// Retrieval info: PRIVATE: PLL_TARGET_HARCOPY_CHECK NUMERIC "0" +// Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0" +// Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0" +// Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "0" +// Retrieval info: PRIVATE: SELF_RESET_LOCK_LOSS STRING "0" +// Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0" +// Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0" +// Retrieval info: PRIVATE: SPREAD_FREQ STRING "50.000" +// Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz" +// Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500" +// Retrieval info: PRIVATE: SPREAD_USE STRING "0" +// Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0" +// Retrieval info: PRIVATE: STICKY_CLK0 STRING "1" +// Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1" +// Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "0" +// Retrieval info: PRIVATE: USE_CLK0 STRING "1" +// Retrieval info: PRIVATE: USE_CLKENA0 STRING "0" +// Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0" +// Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all +// Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "1" +// Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50" +// Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "2" +// Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0" +// Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0" +// Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "15625" +// Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone" +// Retrieval info: CONSTANT: LPM_TYPE STRING "altpll" +// Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL" +// Retrieval info: CONSTANT: PLL_TYPE STRING "AUTO" +// Retrieval info: CONSTANT: PORT_ACTIVECLOCK STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_ARESET STRING "PORT_USED" +// Retrieval info: CONSTANT: PORT_CLKBAD0 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_CLKBAD1 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_CLKLOSS STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_FBIN STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_INCLK0 STRING "PORT_USED" +// Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_LOCKED STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_PFDENA STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_PHASECOUNTERSELECT STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_PHASEDONE STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_PHASESTEP STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_PHASEUPDOWN STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_PLLENA STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_SCANACLR STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_SCANREAD STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_SCANWRITE STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_clk0 STRING "PORT_USED" +// Retrieval info: CONSTANT: PORT_clk1 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_clk3 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_clk4 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_clk5 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_clkena0 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_clkena1 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_clkena3 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_clkena4 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_clkena5 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_extclk0 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_extclk1 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_extclk2 STRING "PORT_UNUSED" +// Retrieval info: CONSTANT: PORT_extclk3 STRING "PORT_UNUSED" +// Retrieval info: USED_PORT: @clk 0 0 6 0 OUTPUT_CLK_EXT VCC "@clk[5..0]" +// Retrieval info: USED_PORT: @extclk 0 0 4 0 OUTPUT_CLK_EXT VCC "@extclk[3..0]" +// Retrieval info: USED_PORT: areset 0 0 0 0 INPUT GND "areset" +// Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT_CLK_EXT VCC "c0" +// Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT_CLK_EXT GND "inclk0" +// Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0 +// Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0 +// Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0 +// Retrieval info: CONNECT: @areset 0 0 0 0 areset 0 0 0 0 +// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.v TRUE FALSE +// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.ppf TRUE FALSE +// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.inc FALSE FALSE +// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.cmp FALSE FALSE +// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.bsf TRUE +// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll_inst.v TRUE FALSE +// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll_bb.v TRUE FALSE +// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll_waveforms.html TRUE FALSE +// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll_wave*.jpg FALSE FALSE +// Retrieval info: LIB_FILE: altera_mf diff --git a/gr-sounder/src/fpga/lib/lfsr.v b/gr-sounder/src/fpga/lib/lfsr.v new file mode 100644 index 000000000..6ae967ba9 --- /dev/null +++ b/gr-sounder/src/fpga/lib/lfsr.v @@ -0,0 +1,46 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +module lfsr(clk_i,rst_i,ena_i,strobe_i,mask_i,pn_o); + parameter width = 16; + + input clk_i; + input rst_i; + input ena_i; + input strobe_i; + input [width-1:0] mask_i; + + output pn_o; + + reg [width-1:0] shifter; + + wire parity = ^(shifter & mask_i); + + always @(posedge clk_i) + if (rst_i | ~ena_i) + shifter <= 1; + else + if (strobe_i) + shifter <= {shifter[width-2:0],parity}; + + assign pn_o = shifter[0]; + +endmodule // lfsr diff --git a/gr-sounder/src/fpga/lib/lfsr_constants.v b/gr-sounder/src/fpga/lib/lfsr_constants.v new file mode 100755 index 000000000..79fcb1a2b --- /dev/null +++ b/gr-sounder/src/fpga/lib/lfsr_constants.v @@ -0,0 +1,51 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +module lfsr_constants(degree_i,mask_o,len_o); + input wire [4:0] degree_i; + output reg [15:0] mask_o; + output wire [15:0] len_o; + + assign len_o = (16'b1 << degree_i) - 1; + + always @* + case (degree_i) + 5'd00: mask_o = 16'h0000; + 5'd01: mask_o = 16'h0001; + 5'd02: mask_o = 16'h0003; + 5'd03: mask_o = 16'h0005; + 5'd04: mask_o = 16'h0009; + 5'd05: mask_o = 16'h0012; + 5'd06: mask_o = 16'h0021; + 5'd07: mask_o = 16'h0041; + 5'd08: mask_o = 16'h008E; + 5'd09: mask_o = 16'h0108; + 5'd10: mask_o = 16'h0204; + 5'd11: mask_o = 16'h0402; + 5'd12: mask_o = 16'h0829; + 5'd13: mask_o = 16'h100D; + 5'd14: mask_o = 16'h2015; + 5'd15: mask_o = 16'h4001; + 5'd16: mask_o = 16'h8016; + default: mask_o = 16'h0000; + endcase // case(degree_i) + +endmodule // lfsr_constants diff --git a/gr-sounder/src/fpga/lib/sounder.v b/gr-sounder/src/fpga/lib/sounder.v new file mode 100644 index 000000000..ea4007cb8 --- /dev/null +++ b/gr-sounder/src/fpga/lib/sounder.v @@ -0,0 +1,86 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +`include "../../../../usrp/firmware/include/fpga_regs_common.v" +`include "../../../../usrp/firmware/include/fpga_regs_standard.v" + +module sounder(clk_i,saddr_i,sdata_i,s_strobe_i,tx_rst_i,tx_enable_i,tx_strobe_i, + tx_dac_i_o,tx_dac_q_o, + rx_rst_i,rx_enable_i,rx_strobe_i,rx_strobe_o, + rx_adc_i_i,rx_adc_q_i,rx_imp_i_o,rx_imp_q_o); + + // System interface + input clk_i; // Master clock @ 64 MHz + input [6:0] saddr_i; // Configuration bus address + input [31:0] sdata_i; // Configuration bus data + input s_strobe_i; // Configuration bus write + + // Transmit subsystem + input tx_rst_i; // Independent subsystem reset + input tx_enable_i; // Turn on transmitter functionality + input tx_strobe_i; // Generate an transmitter output sample + output [15:0] tx_dac_i_o; // I channel transmitter output to DAC + output [15:0] tx_dac_q_o; // Q channel transmitter output to DAC + + // Receive subsystem + input rx_rst_i; // Independent subsystem reset + input rx_enable_i; // Turn on receiver functionality + input rx_strobe_i; // Indicates receive sample ready from ADC + output rx_strobe_o; // Indicates output samples ready for Rx FIFO + input [15:0] rx_adc_i_i; // I channel input from ADC + input [15:0] rx_adc_q_i; // Q channel input from ADC + output [15:0] rx_imp_i_o; // I channel impulse response to Rx FIFO + output [15:0] rx_imp_q_o; // Q channel impulse response to Rx FIFO + + // Configuration + wire [4:0] degree; // LFSR register length + wire [15:0] mask; // LFSR parity mask + wire [15:0] len; // PN code sequence length + wire loopback; // Enable digital loopback + + // Loopback implementation + wire [15:0] tx_i, tx_q, rx_i, rx_q; // Internal transmit and receive data bus + + assign tx_dac_i_o = loopback ? 16'b0 : tx_i; + assign tx_dac_q_o = loopback ? 16'b0 : tx_q; + assign rx_i = loopback ? tx_i : rx_adc_i_i; + assign rx_q = loopback ? tx_q : rx_adc_q_i; + + setting_reg #(`FR_USER_0) sr_lfsr_degree + ( .clock(clk_i),.reset(1'b0),.strobe(s_strobe_i),.addr(saddr_i),.in(sdata_i),.out(degree) ); + + setting_reg #(`FR_USER_1) sr_mode + ( .clock(clk_i),.reset(1'b0),.strobe(s_strobe_i),.addr(saddr_i),.in(sdata_i), + .out({loopback}) ); + + lfsr_constants constants(.degree_i(degree),.mask_o(mask),.len_o(len)); + + sounder_tx transmitter + ( .clk_i(clk_i),.rst_i(tx_rst_i),.ena_i(tx_enable_i),.strobe_i(tx_strobe_i),.mask_i(mask), + .tx_i_o(tx_i),.tx_q_o(tx_q) ); + + sounder_rx receiver + ( .clk_i(clk_i),.rst_i(rx_rst_i),.ena_i(rx_enable_i), + .rx_strobe_i(rx_strobe_i),.tx_strobe_i(tx_strobe_i),.mask_i(mask),.len_i(len), + .rx_in_i_i(rx_i),.rx_in_q_i(rx_q),.rx_i_o(rx_imp_i_o),.rx_q_o(rx_imp_q_o), + .rx_strobe_o(rx_strobe_o) ); + +endmodule // sounder diff --git a/gr-sounder/src/fpga/lib/sounder_rx.v b/gr-sounder/src/fpga/lib/sounder_rx.v new file mode 100644 index 000000000..b7c5f4878 --- /dev/null +++ b/gr-sounder/src/fpga/lib/sounder_rx.v @@ -0,0 +1,84 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +module sounder_rx(clk_i,rst_i,ena_i,rx_strobe_i,tx_strobe_i,mask_i,len_i, + rx_in_i_i,rx_in_q_i,rx_i_o,rx_q_o,rx_strobe_o); + + input clk_i; // Master clock + input rst_i; // Subsystem reset + input ena_i; // Subsystem enable + input rx_strobe_i; // Strobe every received sample + input tx_strobe_i; // Strobe every transmitted sample + + input [15:0] mask_i; // PN code LFSR mask + input [15:0] len_i; // PN code LFSR sequence length + input [15:0] rx_in_i_i; // I channel on receive + input [15:0] rx_in_q_i; // Q channel on receive + + output [15:0] rx_i_o; // I channel of impulse response + output [15:0] rx_q_o; // Q channel of impulse response + output rx_strobe_o; // Impulse response value ready + + // LFSR phase counter + reg [15:0] count; + wire cycle = (count == (len_i - 1)); + + always @(posedge clk_i) + if (rst_i | ~ena_i) + count <= 16'b0; + else + if (cycle) + count <= 16'b0; + else + count <= count + 16'b1; + + // Retard LFSR phase once per cycle + wire lfsr_strobe = (tx_strobe_i & ~cycle); + + // Recreate local reference of transmitted PN code + wire pn; + lfsr reference + ( .clk_i(clk_i),.rst_i(rst_i),.ena_i(ena_i),.strobe_i(lfsr_strobe),.mask_i(mask_i),.pn_o(pn) ); + + wire [31:0] rx_i_ext, rx_q_ext; + sign_extend #(16,32) i_extend(rx_in_i_i, rx_i_ext); + sign_extend #(16,32) q_extend(rx_in_q_i, rx_q_ext); + + reg [31:0] accum; + always @(posedge clk_i) + if (rst_i | ~ena_i) + accum <= 32'b0; + else + if (rx_strobe_i) + if (cycle) + accum <= 32'b0; + else + if (pn) + accum <= accum + rx_i_ext; + else + accum <= accum - rx_i_ext; + + assign rx_i_o = accum[31:16]; + assign rx_q_o = accum[15:0]; + assign rx_strobe_o = rx_strobe_i & cycle; + +endmodule // sounder_rx + diff --git a/gr-sounder/src/fpga/lib/sounder_tx.v b/gr-sounder/src/fpga/lib/sounder_tx.v new file mode 100644 index 000000000..d5300fecb --- /dev/null +++ b/gr-sounder/src/fpga/lib/sounder_tx.v @@ -0,0 +1,45 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +`include "../../../../usrp/firmware/include/fpga_regs_common.v" +`include "../../../../usrp/firmware/include/fpga_regs_standard.v" + +`define MAX_VALUE 16'h7FFF // 2s complement +`define MIN_VALUE 16'h8000 + +module sounder_tx(clk_i,rst_i,ena_i,strobe_i,mask_i,tx_i_o,tx_q_o); + input clk_i; + input rst_i; + input ena_i; + input strobe_i; + input [15:0] mask_i; + output [15:0] tx_i_o; + output [15:0] tx_q_o; + + wire pn; + + lfsr pn_code + ( .clk_i(clk_i),.rst_i(rst_i),.ena_i(ena_i),.strobe_i(strobe_i),.mask_i(mask_i),.pn_o(pn) ); + + assign tx_i_o = pn ? `MAX_VALUE : `MIN_VALUE; // Bipolar + assign tx_q_o = 16'b0; + +endmodule // sounder_tx diff --git a/gr-sounder/src/fpga/rbf/Makefile.am b/gr-sounder/src/fpga/rbf/Makefile.am new file mode 100644 index 000000000..5a8b709d5 --- /dev/null +++ b/gr-sounder/src/fpga/rbf/Makefile.am @@ -0,0 +1,44 @@ +# +# Copyright 2005,2006,2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +include $(top_srcdir)/Makefile.common + +datadir = $(prefix)/share/usrp + +rbfs = \ + rev2/usrp_sounder.rbf \ + rev4/usrp_sounder.rbf + +EXTRA_DIST = \ + $(rbfs) + + +install-data-local: + @for file in $(rbfs); do \ + echo "$(INSTALL_DATA) $(srcdir)/$$file $(DESTDIR)$(datadir)/$$file"; \ + $(INSTALL_DATA) $(srcdir)/$$file $(DESTDIR)$(datadir)/$$file; \ + done + +uninstall-local: + @for file in $(rbfs); do \ + echo "$(RM) $(DESTDIR)$(datadir)/$$file"; \ + $(RM) $(DESTDIR)$(datadir)/$$file; \ + done diff --git a/gr-sounder/src/fpga/rbf/rev2/usrp_sounder.rbf b/gr-sounder/src/fpga/rbf/rev2/usrp_sounder.rbf Binary files differnew file mode 100755 index 000000000..47a0c98fb --- /dev/null +++ b/gr-sounder/src/fpga/rbf/rev2/usrp_sounder.rbf diff --git a/gr-sounder/src/fpga/rbf/rev4/usrp_sounder.rbf b/gr-sounder/src/fpga/rbf/rev4/usrp_sounder.rbf Binary files differnew file mode 100755 index 000000000..47a0c98fb --- /dev/null +++ b/gr-sounder/src/fpga/rbf/rev4/usrp_sounder.rbf diff --git a/gr-sounder/src/fpga/top/Makefile.am b/gr-sounder/src/fpga/top/Makefile.am new file mode 100644 index 000000000..69f6fef9d --- /dev/null +++ b/gr-sounder/src/fpga/top/Makefile.am @@ -0,0 +1,43 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +include $(top_srcdir)/Makefile.common + +EXTRA_DIST = \ + config.vh \ + usrp_sounder.v \ + usrp_sounder.csf \ + usrp_sounder.esf \ + usrp_sounder.psf \ + usrp_sounder.qpf + +MOSTLYCLEANFILES = \ + db/* \ + *.rpt \ + *.summary \ + *.rbf \ + *.qws \ + *.smsg \ + *.done \ + *.pin \ + *.sof + + diff --git a/gr-sounder/src/fpga/top/config.vh b/gr-sounder/src/fpga/top/config.vh new file mode 100644 index 000000000..06445e9af --- /dev/null +++ b/gr-sounder/src/fpga/top/config.vh @@ -0,0 +1,22 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// +// Uncomment to enable 64 MHz Tx clock, otherwise 32 MHz +//`define TX_RATE_MAX diff --git a/gr-sounder/src/fpga/top/usrp_sounder.csf b/gr-sounder/src/fpga/top/usrp_sounder.csf new file mode 100644 index 000000000..544f278e3 --- /dev/null +++ b/gr-sounder/src/fpga/top/usrp_sounder.csf @@ -0,0 +1,444 @@ +COMPILER_SETTINGS +{ + IO_PLACEMENT_OPTIMIZATION = OFF; + ENABLE_DRC_SETTINGS = OFF; + PHYSICAL_SYNTHESIS_REGISTER_RETIMING = OFF; + PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION = OFF; + PHYSICAL_SYNTHESIS_COMBO_LOGIC = OFF; + DRC_FANOUT_EXCEEDING = 30; + DRC_REPORT_FANOUT_EXCEEDING = OFF; + DRC_TOP_FANOUT = 50; + DRC_REPORT_TOP_FANOUT = OFF; + RUN_DRC_DURING_COMPILATION = OFF; + ADV_NETLIST_OPT_RETIME_CORE_AND_IO = ON; + ADV_NETLIST_OPT_SYNTH_USE_FITTER_INFO = OFF; + ADV_NETLIST_OPT_SYNTH_GATE_RETIME = OFF; + ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP = OFF; + SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES = OFF; + MERGE_HEX_FILE = OFF; + TRUE_WYSIWYG_FLOW = OFF; + SEED = 1; + FINAL_PLACEMENT_OPTIMIZATION = AUTOMATICALLY; + FAMILY = Cyclone; + DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "LOWER TO 1ESB UPPER TO 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_INPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_WIDE_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DEEP_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB"; + DPRAM_SINGLE_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB"; + DPRAM_WIDE_MODE_OUTPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4ESB"; + DPRAM_DEEP_MODE_OUTPUT_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DUAL_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_SINGLE_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_WIDE_MODE_INPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4"; + DPRAM_DEEP_MODE_INPUT_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_OTHER_SIGNALS_EPXA4_10 = "DEFAULT OTHER ROUTING OPTIONS"; + DPRAM_OUTPUT_EPXA4_10 = "DEFAULT OUTPUT ROUTING OPTIONS"; + DPRAM_INPUT_EPXA4_10 = "DEFAULT INPUT ROUTING OPTIONS"; + STRIPE_TO_PLD_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2"; + PLD_TO_STRIPE_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2"; + PROCESSOR_DEBUG_EXTENSIONS_EPXA4_10 = "MEGALAB COLUMN 2"; + STRIPE_TO_PLD_BRIDGE_EPXA4_10 = "MEGALAB COLUMN 1"; + FAST_FIT_COMPILATION = OFF; + SIGNALPROBE_DURING_NORMAL_COMPILATION = OFF; + OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING = ON; + OPTIMIZE_TIMING = "NORMAL COMPILATION"; + OPTIMIZE_HOLD_TIMING = OFF; + COMPILATION_LEVEL = FULL; + SAVE_DISK_SPACE = OFF; + SPEED_DISK_USAGE_TRADEOFF = NORMAL; + LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT = OFF; + SIGNALPROBE_ALLOW_OVERUSE = OFF; + FOCUS_ENTITY_NAME = |usrp_sounder; + ROUTING_BACK_ANNOTATION_MODE = OFF; + INC_PLC_MODE = OFF; + FIT_ONLY_ONE_ATTEMPT = OFF; +} +DEFAULT_DEVICE_OPTIONS +{ + GENERATE_CONFIG_HEXOUT_FILE = OFF; + GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON; + GENERATE_CONFIG_JBC_FILE = OFF; + GENERATE_CONFIG_JAM_FILE = OFF; + GENERATE_CONFIG_ISC_FILE = OFF; + GENERATE_CONFIG_SVF_FILE = OFF; + GENERATE_JBC_FILE_COMPRESSED = ON; + GENERATE_JBC_FILE = OFF; + GENERATE_JAM_FILE = OFF; + GENERATE_ISC_FILE = OFF; + GENERATE_SVF_FILE = OFF; + RESERVE_PIN = "AS INPUT TRI-STATED"; + RESERVE_ALL_UNUSED_PINS = "AS OUTPUT DRIVING GROUND"; + HEXOUT_FILE_COUNT_DIRECTION = UP; + HEXOUT_FILE_START_ADDRESS = 0; + GENERATE_HEX_FILE = OFF; + GENERATE_RBF_FILE = OFF; + GENERATE_TTF_FILE = OFF; + RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED"; + RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF; + AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON; + EPROM_USE_CHECKSUM_AS_USERCODE = OFF; + FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + STRATIX_CONFIGURATION_DEVICE = AUTO; + CYCLONE_CONFIGURATION_DEVICE = AUTO; + FLEX10K_CONFIGURATION_DEVICE = AUTO; + FLEX6K_CONFIGURATION_DEVICE = AUTO; + MERCURY_CONFIGURATION_DEVICE = AUTO; + EXCALIBUR_CONFIGURATION_DEVICE = AUTO; + APEX20K_CONFIGURATION_DEVICE = AUTO; + USE_CONFIGURATION_DEVICE = ON; + ENABLE_INIT_DONE_OUTPUT = OFF; + FLEX10K_ENABLE_LOCK_OUTPUT = OFF; + ENABLE_DEVICE_WIDE_OE = OFF; + ENABLE_DEVICE_WIDE_RESET = OFF; + RELEASE_CLEARS_BEFORE_TRI_STATES = OFF; + AUTO_RESTART_CONFIGURATION = OFF; + ENABLE_VREFB_PIN = OFF; + ENABLE_VREFA_PIN = OFF; + SECURITY_BIT = OFF; + USER_START_UP_CLOCK = OFF; + APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + CYCLONE_CONFIGURATION_SCHEME = "ACTIVE SERIAL"; + STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + STRATIX_UPDATE_MODE = STANDARD; + USE_CHECKSUM_AS_USERCODE = OFF; + MAX7000_USE_CHECKSUM_AS_USERCODE = OFF; + MAX7000_JTAG_USER_CODE = FFFFFFFF; + FLEX10K_JTAG_USER_CODE = 7F; + MERCURY_JTAG_USER_CODE = FFFFFFFF; + APEX20K_JTAG_USER_CODE = FFFFFFFF; + STRATIX_JTAG_USER_CODE = FFFFFFFF; + MAX7000S_JTAG_USER_CODE = FFFF; + RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF; + ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + MAX7000_ENABLE_JTAG_BST_SUPPORT = ON; + ENABLE_JTAG_BST_SUPPORT = OFF; + CONFIGURATION_CLOCK_DIVISOR = 1; + CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ"; + CLOCK_SOURCE = INTERNAL; + COMPRESSION_MODE = OFF; + ON_CHIP_BITSTREAM_DECOMPRESSION = OFF; +} +AUTO_SLD_HUB_ENTITY +{ + AUTO_INSERT_SLD_HUB_ENTITY = ENABLE; + HUB_INSTANCE_NAME = SLD_HUB_INST; + HUB_ENTITY_NAME = SLD_HUB; +} +SIGNALTAP_LOGIC_ANALYZER_SETTINGS +{ + ENABLE_SIGNALTAP = Off; + AUTO_ENABLE_SMART_COMPILE = On; +} +CHIP(usrp_sounder) +{ + DEVICE = EP1C12Q240C8; + DEVICE_FILTER_PACKAGE = "ANY QFP"; + DEVICE_FILTER_PIN_COUNT = 240; + DEVICE_FILTER_SPEED_GRADE = ANY; + AUTO_RESTART_CONFIGURATION = OFF; + RELEASE_CLEARS_BEFORE_TRI_STATES = OFF; + USER_START_UP_CLOCK = OFF; + ENABLE_DEVICE_WIDE_RESET = OFF; + ENABLE_DEVICE_WIDE_OE = OFF; + ENABLE_INIT_DONE_OUTPUT = OFF; + FLEX10K_ENABLE_LOCK_OUTPUT = OFF; + ENABLE_JTAG_BST_SUPPORT = OFF; + MAX7000_ENABLE_JTAG_BST_SUPPORT = ON; + APEX20K_JTAG_USER_CODE = FFFFFFFF; + MERCURY_JTAG_USER_CODE = FFFFFFFF; + FLEX10K_JTAG_USER_CODE = 7F; + MAX7000_JTAG_USER_CODE = FFFFFFFF; + MAX7000S_JTAG_USER_CODE = FFFF; + STRATIX_JTAG_USER_CODE = FFFFFFFF; + APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + CYCLONE_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + USE_CONFIGURATION_DEVICE = OFF; + APEX20K_CONFIGURATION_DEVICE = AUTO; + MERCURY_CONFIGURATION_DEVICE = AUTO; + FLEX6K_CONFIGURATION_DEVICE = AUTO; + FLEX10K_CONFIGURATION_DEVICE = AUTO; + EXCALIBUR_CONFIGURATION_DEVICE = AUTO; + STRATIX_CONFIGURATION_DEVICE = AUTO; + CYCLONE_CONFIGURATION_DEVICE = AUTO; + STRATIX_UPDATE_MODE = STANDARD; + APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON; + DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF; + COMPRESSION_MODE = OFF; + ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF; + FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + EPROM_USE_CHECKSUM_AS_USERCODE = OFF; + USE_CHECKSUM_AS_USERCODE = OFF; + MAX7000_USE_CHECKSUM_AS_USERCODE = OFF; + GENERATE_TTF_FILE = OFF; + GENERATE_RBF_FILE = ON; + GENERATE_HEX_FILE = OFF; + SECURITY_BIT = OFF; + ENABLE_VREFA_PIN = OFF; + ENABLE_VREFB_PIN = OFF; + GENERATE_SVF_FILE = OFF; + GENERATE_ISC_FILE = OFF; + GENERATE_JAM_FILE = OFF; + GENERATE_JBC_FILE = OFF; + GENERATE_JBC_FILE_COMPRESSED = ON; + GENERATE_CONFIG_SVF_FILE = OFF; + GENERATE_CONFIG_ISC_FILE = OFF; + GENERATE_CONFIG_JAM_FILE = OFF; + GENERATE_CONFIG_JBC_FILE = OFF; + GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON; + GENERATE_CONFIG_HEXOUT_FILE = OFF; + ON_CHIP_BITSTREAM_DECOMPRESSION = OFF; + BASE_PIN_OUT_FILE_ON_SAMEFRAME_DEVICE = OFF; + HEXOUT_FILE_START_ADDRESS = 0; + HEXOUT_FILE_COUNT_DIRECTION = UP; + RESERVE_ALL_UNUSED_PINS = "AS INPUT TRI-STATED"; + STRATIX_DEVICE_IO_STANDARD = LVTTL; + CLOCK_SOURCE = INTERNAL; + CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ"; + CONFIGURATION_CLOCK_DIVISOR = 1; + RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED"; + RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + SCLK : LOCATION = Pin_101; + SDI : LOCATION = Pin_100; + SEN : LOCATION = Pin_98; + SLD : LOCATION = Pin_95; + adc1_data[0] : LOCATION = Pin_5; + adc1_data[10] : LOCATION = Pin_235; + adc1_data[11] : LOCATION = Pin_234; + adc1_data[1] : LOCATION = Pin_4; + adc1_data[2] : LOCATION = Pin_3; + adc1_data[3] : LOCATION = Pin_2; + adc1_data[4] : LOCATION = Pin_1; + adc1_data[4] : IO_STANDARD = LVTTL; + adc1_data[5] : LOCATION = Pin_240; + adc1_data[6] : LOCATION = Pin_239; + adc1_data[7] : LOCATION = Pin_238; + adc1_data[8] : LOCATION = Pin_237; + adc1_data[9] : LOCATION = Pin_236; + adc2_data[0] : LOCATION = Pin_20; + adc2_data[10] : LOCATION = Pin_8; + adc2_data[11] : LOCATION = Pin_7; + adc2_data[1] : LOCATION = Pin_19; + adc2_data[2] : LOCATION = Pin_18; + adc2_data[3] : LOCATION = Pin_17; + adc2_data[4] : LOCATION = Pin_16; + adc2_data[5] : LOCATION = Pin_15; + adc2_data[6] : LOCATION = Pin_14; + adc2_data[7] : LOCATION = Pin_13; + adc2_data[8] : LOCATION = Pin_12; + adc2_data[9] : LOCATION = Pin_11; + adc3_data[0] : LOCATION = Pin_200; + adc3_data[10] : LOCATION = Pin_184; + adc3_data[11] : LOCATION = Pin_183; + adc3_data[1] : LOCATION = Pin_197; + adc3_data[2] : LOCATION = Pin_196; + adc3_data[3] : LOCATION = Pin_195; + adc3_data[4] : LOCATION = Pin_194; + adc3_data[5] : LOCATION = Pin_193; + adc3_data[6] : LOCATION = Pin_188; + adc3_data[7] : LOCATION = Pin_187; + adc3_data[8] : LOCATION = Pin_186; + adc3_data[9] : LOCATION = Pin_185; + adc4_data[0] : LOCATION = Pin_222; + adc4_data[10] : LOCATION = Pin_203; + adc4_data[11] : LOCATION = Pin_202; + adc4_data[1] : LOCATION = Pin_219; + adc4_data[2] : LOCATION = Pin_217; + adc4_data[3] : LOCATION = Pin_216; + adc4_data[4] : LOCATION = Pin_215; + adc4_data[5] : LOCATION = Pin_214; + adc4_data[6] : LOCATION = Pin_213; + adc4_data[7] : LOCATION = Pin_208; + adc4_data[8] : LOCATION = Pin_207; + adc4_data[9] : LOCATION = Pin_206; + adc_oeb[0] : LOCATION = Pin_228; + adc_oeb[1] : LOCATION = Pin_21; + adc_oeb[2] : LOCATION = Pin_181; + adc_oeb[3] : LOCATION = Pin_218; + adc_otr[0] : LOCATION = Pin_233; + adc_otr[1] : LOCATION = Pin_6; + adc_otr[2] : LOCATION = Pin_182; + adc_otr[3] : LOCATION = Pin_201; + adclk0 : LOCATION = Pin_224; + adclk1 : LOCATION = Pin_226; + clk0 : LOCATION = Pin_28; + clk0 : RESERVE_PIN = "AS INPUT TRI-STATED"; + clk0 : IO_STANDARD = LVTTL; + clk1 : LOCATION = Pin_29; + clk1 : RESERVE_PIN = "AS INPUT TRI-STATED"; + clk1 : IO_STANDARD = LVTTL; + clk3 : LOCATION = Pin_152; + clk3 : RESERVE_PIN = "AS INPUT TRI-STATED"; + clk3 : IO_STANDARD = LVTTL; + clk_120mhz : LOCATION = Pin_153; + clk_120mhz : IO_STANDARD = LVTTL; + clk_out : LOCATION = Pin_63; + clk_out : IO_STANDARD = LVTTL; + dac1_data[0] : LOCATION = Pin_165; + dac1_data[10] : LOCATION = Pin_177; + dac1_data[11] : LOCATION = Pin_178; + dac1_data[12] : LOCATION = Pin_179; + dac1_data[13] : LOCATION = Pin_180; + dac1_data[1] : LOCATION = Pin_166; + dac1_data[2] : LOCATION = Pin_167; + dac1_data[3] : LOCATION = Pin_168; + dac1_data[4] : LOCATION = Pin_169; + dac1_data[5] : LOCATION = Pin_170; + dac1_data[6] : LOCATION = Pin_173; + dac1_data[7] : LOCATION = Pin_174; + dac1_data[8] : LOCATION = Pin_175; + dac1_data[9] : LOCATION = Pin_176; + dac2_data[0] : LOCATION = Pin_159; + dac2_data[10] : LOCATION = Pin_163; + dac2_data[11] : LOCATION = Pin_139; + dac2_data[12] : LOCATION = Pin_164; + dac2_data[13] : LOCATION = Pin_138; + dac2_data[1] : LOCATION = Pin_158; + dac2_data[2] : LOCATION = Pin_160; + dac2_data[3] : LOCATION = Pin_156; + dac2_data[4] : LOCATION = Pin_161; + dac2_data[5] : LOCATION = Pin_144; + dac2_data[6] : LOCATION = Pin_162; + dac2_data[7] : LOCATION = Pin_141; + dac2_data[8] : LOCATION = Pin_143; + dac2_data[9] : LOCATION = Pin_140; + dac3_data[0] : LOCATION = Pin_122; + dac3_data[10] : LOCATION = Pin_134; + dac3_data[11] : LOCATION = Pin_135; + dac3_data[12] : LOCATION = Pin_136; + dac3_data[13] : LOCATION = Pin_137; + dac3_data[1] : LOCATION = Pin_123; + dac3_data[2] : LOCATION = Pin_124; + dac3_data[3] : LOCATION = Pin_125; + dac3_data[4] : LOCATION = Pin_126; + dac3_data[5] : LOCATION = Pin_127; + dac3_data[6] : LOCATION = Pin_128; + dac3_data[7] : LOCATION = Pin_131; + dac3_data[8] : LOCATION = Pin_132; + dac3_data[9] : LOCATION = Pin_133; + dac4_data[0] : LOCATION = Pin_104; + dac4_data[10] : LOCATION = Pin_118; + dac4_data[11] : LOCATION = Pin_119; + dac4_data[12] : LOCATION = Pin_120; + dac4_data[13] : LOCATION = Pin_121; + dac4_data[1] : LOCATION = Pin_105; + dac4_data[2] : LOCATION = Pin_106; + dac4_data[3] : LOCATION = Pin_107; + dac4_data[4] : LOCATION = Pin_108; + dac4_data[5] : LOCATION = Pin_113; + dac4_data[6] : LOCATION = Pin_114; + dac4_data[7] : LOCATION = Pin_115; + dac4_data[8] : LOCATION = Pin_116; + dac4_data[9] : LOCATION = Pin_117; + enable_rx : LOCATION = Pin_88; + enable_tx : LOCATION = Pin_93; + gndbus[0] : LOCATION = Pin_223; + gndbus[0] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[0] : IO_STANDARD = LVTTL; + gndbus[1] : LOCATION = Pin_225; + gndbus[1] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[1] : IO_STANDARD = LVTTL; + gndbus[2] : LOCATION = Pin_227; + gndbus[2] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[2] : IO_STANDARD = LVTTL; + gndbus[3] : LOCATION = Pin_62; + gndbus[3] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[3] : IO_STANDARD = LVTTL; + gndbus[4] : LOCATION = Pin_64; + gndbus[4] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[4] : IO_STANDARD = LVTTL; + misc_pins[0] : LOCATION = Pin_87; + misc_pins[0] : IO_STANDARD = LVTTL; + misc_pins[10] : LOCATION = Pin_76; + misc_pins[10] : IO_STANDARD = LVTTL; + misc_pins[11] : LOCATION = Pin_74; + misc_pins[11] : IO_STANDARD = LVTTL; + misc_pins[1] : LOCATION = Pin_86; + misc_pins[1] : IO_STANDARD = LVTTL; + misc_pins[2] : LOCATION = Pin_85; + misc_pins[2] : IO_STANDARD = LVTTL; + misc_pins[3] : LOCATION = Pin_84; + misc_pins[3] : IO_STANDARD = LVTTL; + misc_pins[4] : LOCATION = Pin_83; + misc_pins[4] : IO_STANDARD = LVTTL; + misc_pins[5] : LOCATION = Pin_82; + misc_pins[5] : IO_STANDARD = LVTTL; + misc_pins[6] : LOCATION = Pin_79; + misc_pins[6] : IO_STANDARD = LVTTL; + misc_pins[7] : LOCATION = Pin_78; + misc_pins[7] : IO_STANDARD = LVTTL; + misc_pins[8] : LOCATION = Pin_77; + misc_pins[8] : IO_STANDARD = LVTTL; + misc_pins[9] : LOCATION = Pin_75; + misc_pins[9] : IO_STANDARD = LVTTL; + reset : LOCATION = Pin_94; + usbclk : LOCATION = Pin_55; + usbctl[0] : LOCATION = Pin_56; + usbctl[1] : LOCATION = Pin_54; + usbctl[2] : LOCATION = Pin_53; + usbctl[3] : LOCATION = Pin_58; + usbctl[4] : LOCATION = Pin_57; + usbctl[5] : LOCATION = Pin_44; + usbdata[0] : LOCATION = Pin_73; + usbdata[10] : LOCATION = Pin_41; + usbdata[11] : LOCATION = Pin_39; + usbdata[12] : LOCATION = Pin_38; + usbdata[12] : IO_STANDARD = LVTTL; + usbdata[13] : LOCATION = Pin_37; + usbdata[14] : LOCATION = Pin_24; + usbdata[15] : LOCATION = Pin_23; + usbdata[1] : LOCATION = Pin_68; + usbdata[2] : LOCATION = Pin_67; + usbdata[3] : LOCATION = Pin_66; + usbdata[4] : LOCATION = Pin_65; + usbdata[5] : LOCATION = Pin_61; + usbdata[6] : LOCATION = Pin_60; + usbdata[7] : LOCATION = Pin_59; + usbdata[8] : LOCATION = Pin_43; + usbdata[9] : LOCATION = Pin_42; + usbrdy[0] : LOCATION = Pin_45; + usbrdy[1] : LOCATION = Pin_46; + usbrdy[2] : LOCATION = Pin_47; + usbrdy[3] : LOCATION = Pin_48; + usbrdy[4] : LOCATION = Pin_49; + usbrdy[5] : LOCATION = Pin_50; + clear_status : LOCATION = Pin_99; +} diff --git a/gr-sounder/src/fpga/top/usrp_sounder.esf b/gr-sounder/src/fpga/top/usrp_sounder.esf new file mode 100644 index 000000000..c7d828b2b --- /dev/null +++ b/gr-sounder/src/fpga/top/usrp_sounder.esf @@ -0,0 +1,14 @@ +SIMULATOR_SETTINGS +{ + ESTIMATE_POWER_CONSUMPTION = OFF; + GLITCH_INTERVAL = 1NS; + GLITCH_DETECTION = OFF; + SIMULATION_COVERAGE = ON; + CHECK_OUTPUTS = OFF; + SETUP_HOLD_DETECTION = OFF; + POWER_ESTIMATION_START_TIME = "0 NS"; + ADD_DEFAULT_PINS_TO_SIMULATION_OUTPUT_WAVEFORMS = ON; + SIMULATION_MODE = TIMING; + START_TIME = 0NS; + USE_COMPILER_SETTINGS = usrp_sounder; +} diff --git a/gr-sounder/src/fpga/top/usrp_sounder.psf b/gr-sounder/src/fpga/top/usrp_sounder.psf new file mode 100644 index 000000000..7bd32ff59 --- /dev/null +++ b/gr-sounder/src/fpga/top/usrp_sounder.psf @@ -0,0 +1,312 @@ +DEFAULT_DESIGN_ASSISTANT_SETTINGS +{ + HCPY_ALOAD_SIGNALS = OFF; + HCPY_VREF_PINS = OFF; + HCPY_CAT = OFF; + HCPY_ILLEGAL_HC_DEV_PKG = OFF; + ACLK_RULE_IMSZER_ADOMAIN = OFF; + ACLK_RULE_SZER_BTW_ACLK_DOMAIN = OFF; + ACLK_RULE_NO_SZER_ACLK_DOMAIN = OFF; + ACLK_CAT = OFF; + SIGNALRACE_RULE_ASYNCHPIN_SYNCH_CLKPIN = OFF; + SIGNALRACE_CAT = OFF; + NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED = OFF; + NONSYNCHSTRUCT_RULE_SRLATCH = OFF; + NONSYNCHSTRUCT_RULE_DLATCH = OFF; + NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR = OFF; + NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN = OFF; + NONSYNCHSTRUCT_RULE_RIPPLE_CLK = OFF; + NONSYNCHSTRUCT_RULE_DELAY_CHAIN = OFF; + NONSYNCHSTRUCT_RULE_REG_LOOP = OFF; + NONSYNCHSTRUCT_RULE_COMBLOOP = OFF; + NONSYNCHSTRUCT_CAT = OFF; + NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE = OFF; + TIMING_RULE_COIN_CLKEDGE = OFF; + TIMING_RULE_SHIFT_REG = OFF; + TIMING_RULE_HIGH_FANOUTS = OFF; + TIMING_CAT = OFF; + RESET_RULE_ALL = OFF; + RESET_RULE_IMSYNCH_ASYNCH_DOMAIN = OFF; + RESET_RULE_UNSYNCH_ASYNCH_DOMAIN = OFF; + RESET_RULE_REG_ASNYCH = OFF; + RESET_RULE_COMB_ASYNCH_RESET = OFF; + RESET_RULE_IMSYNCH_EXRESET = OFF; + RESET_RULE_UNSYNCH_EXRESET = OFF; + RESET_RULE_INPINS_RESETNET = OFF; + RESET_CAT = OFF; + CLK_RULE_ALL = OFF; + CLK_RULE_MIX_EDGES = OFF; + CLK_RULE_CLKNET_CLKSPINES = OFF; + CLK_RULE_INPINS_CLKNET = OFF; + CLK_RULE_GATING_SCHEME = OFF; + CLK_RULE_INV_CLOCK = OFF; + CLK_RULE_COMB_CLOCK = OFF; + CLK_CAT = OFF; + HCPY_EXCEED_USER_IO_USAGE = OFF; + HCPY_EXCEED_RAM_USAGE = OFF; + NONSYNCHSTRUCT_RULE_ASYN_RAM = OFF; + SIGNALRACE_RULE_TRISTATE = OFF; + ASSG_RULE_MISSING_TIMING = OFF; + ASSG_RULE_MISSING_FMAX = OFF; + ASSG_CAT = OFF; +} +SYNTHESIS_FITTING_SETTINGS +{ + AUTO_SHIFT_REGISTER_RECOGNITION = ON; + AUTO_DSP_RECOGNITION = ON; + AUTO_RAM_RECOGNITION = ON; + REMOVE_DUPLICATE_LOGIC = ON; + AUTO_TURBO_BIT = ON; + AUTO_MERGE_PLLS = ON; + AUTO_OPEN_DRAIN_PINS = ON; + AUTO_PARALLEL_EXPANDERS = ON; + AUTO_FAST_OUTPUT_ENABLE_REGISTERS = OFF; + AUTO_FAST_OUTPUT_REGISTERS = OFF; + AUTO_FAST_INPUT_REGISTERS = OFF; + AUTO_CASCADE_CHAINS = ON; + AUTO_CARRY_CHAINS = ON; + AUTO_DELAY_CHAINS = ON; + MAX7000_PARALLEL_EXPANDER_CHAIN_LENGTH = 4; + PARALLEL_EXPANDER_CHAIN_LENGTH = 16; + CASCADE_CHAIN_LENGTH = 2; + STRATIX_CARRY_CHAIN_LENGTH = 70; + MERCURY_CARRY_CHAIN_LENGTH = 48; + FLEX10K_CARRY_CHAIN_LENGTH = 32; + FLEX6K_CARRY_CHAIN_LENGTH = 32; + CARRY_CHAIN_LENGTH = 48; + CARRY_OUT_PINS_LCELL_INSERT = ON; + NORMAL_LCELL_INSERT = ON; + AUTO_LCELL_INSERTION = ON; + ALLOW_XOR_GATE_USAGE = ON; + AUTO_PACKED_REGISTERS_STRATIX = NORMAL; + AUTO_PACKED_REGISTERS = OFF; + AUTO_PACKED_REG_CYCLONE = NORMAL; + FLEX10K_OPTIMIZATION_TECHNIQUE = AREA; + FLEX6K_OPTIMIZATION_TECHNIQUE = AREA; + MERCURY_OPTIMIZATION_TECHNIQUE = AREA; + APEX20K_OPTIMIZATION_TECHNIQUE = SPEED; + MAX7000_OPTIMIZATION_TECHNIQUE = SPEED; + STRATIX_OPTIMIZATION_TECHNIQUE = SPEED; + CYCLONE_OPTIMIZATION_TECHNIQUE = AREA; + FLEX10K_TECHNOLOGY_MAPPER = LUT; + FLEX6K_TECHNOLOGY_MAPPER = LUT; + MERCURY_TECHNOLOGY_MAPPER = LUT; + APEX20K_TECHNOLOGY_MAPPER = LUT; + MAX7000_TECHNOLOGY_MAPPER = "PRODUCT TERM"; + STRATIX_TECHNOLOGY_MAPPER = LUT; + AUTO_IMPLEMENT_IN_ROM = OFF; + AUTO_GLOBAL_MEMORY_CONTROLS = OFF; + AUTO_GLOBAL_REGISTER_CONTROLS = ON; + AUTO_GLOBAL_OE = ON; + AUTO_GLOBAL_CLOCK = ON; + USE_LPM_FOR_AHDL_OPERATORS = ON; + LIMIT_AHDL_INTEGERS_TO_32_BITS = OFF; + ENABLE_BUS_HOLD_CIRCUITRY = OFF; + WEAK_PULL_UP_RESISTOR = OFF; + TURBO_BIT = ON; + MAX7000_IGNORE_SOFT_BUFFERS = OFF; + IGNORE_SOFT_BUFFERS = ON; + MAX7000_IGNORE_LCELL_BUFFERS = AUTO; + IGNORE_LCELL_BUFFERS = OFF; + IGNORE_ROW_GLOBAL_BUFFERS = OFF; + IGNORE_GLOBAL_BUFFERS = OFF; + IGNORE_CASCADE_BUFFERS = OFF; + IGNORE_CARRY_BUFFERS = OFF; + REMOVE_DUPLICATE_REGISTERS = ON; + REMOVE_REDUNDANT_LOGIC_CELLS = OFF; + ALLOW_POWER_UP_DONT_CARE = ON; + PCI_IO = OFF; + NOT_GATE_PUSH_BACK = ON; + SLOW_SLEW_RATE = OFF; + DSP_BLOCK_BALANCING = AUTO; + STATE_MACHINE_PROCESSING = AUTO; +} +DEFAULT_HARDCOPY_SETTINGS +{ + HARDCOPY_EXTERNAL_CLOCK_JITTER = "0.0 NS"; +} +DEFAULT_TIMING_REQUIREMENTS +{ + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + RUN_ALL_TIMING_ANALYSES = ON; + IGNORE_CLOCK_SETTINGS = OFF; + DEFAULT_HOLD_MULTICYCLE = "SAME AS MULTICYCLE"; + CUT_OFF_IO_PIN_FEEDBACK = ON; + CUT_OFF_CLEAR_AND_PRESET_PATHS = ON; + CUT_OFF_READ_DURING_WRITE_PATHS = ON; + CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS = ON; + DO_MIN_ANALYSIS = ON; + DO_MIN_TIMING = OFF; + NUMBER_OF_PATHS_TO_REPORT = 200; + NUMBER_OF_DESTINATION_TO_REPORT = 10; + NUMBER_OF_SOURCES_PER_DESTINATION_TO_REPORT = 10; + MAX_SCC_SIZE = 50; +} +HDL_SETTINGS +{ + VERILOG_INPUT_VERSION = VERILOG_2001; + ENABLE_IP_DEBUG = OFF; + VHDL_INPUT_VERSION = VHDL93; + VHDL_SHOW_LMF_MAPPING_MESSAGES = OFF; +} +PROJECT_INFO(usrp_sounder) +{ + ORIGINAL_QUARTUS_VERSION = 3.0; + PROJECT_CREATION_TIME_DATE = "00:14:04 JULY 13, 2003"; + LAST_QUARTUS_VERSION = 3.0; + SHOW_REGISTRATION_MESSAGE = ON; + USER_LIBRARIES = "h:\\gnuradio\\trunk\\usrp\\fpga\\megacells"; +} +THIRD_PARTY_EDA_TOOLS(usrp_sounder) +{ + EDA_DESIGN_ENTRY_SYNTHESIS_TOOL = "<NONE>"; + EDA_SIMULATION_TOOL = "<NONE>"; + EDA_TIMING_ANALYSIS_TOOL = "<NONE>"; + EDA_BOARD_DESIGN_TOOL = "<NONE>"; + EDA_FORMAL_VERIFICATION_TOOL = "<NONE>"; + EDA_RESYNTHESIS_TOOL = "<NONE>"; +} +EDA_TOOL_SETTINGS(eda_design_synthesis) +{ + EDA_INPUT_GND_NAME = GND; + EDA_INPUT_VCC_NAME = VCC; + EDA_SHOW_LMF_MAPPING_MESSAGES = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_INPUT_DATA_FORMAT = EDIF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_simulation) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_timing_analysis) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + EDA_LAUNCH_CMD_LINE_TOOL = OFF; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_board_design) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_formal_verification) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_palace) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + RESYNTHESIS_RETIMING = FULL; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; +} +CLOCK(clk_120mhz) +{ + FMAX_REQUIREMENT = "120.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} +CLOCK(usbclk) +{ + FMAX_REQUIREMENT = "48.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} +CLOCK(SCLK) +{ + FMAX_REQUIREMENT = "1.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} +CLOCK(adclk0) +{ + FMAX_REQUIREMENT = "60.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} +CLOCK(adclk1) +{ + FMAX_REQUIREMENT = "60.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} diff --git a/gr-sounder/src/fpga/top/usrp_sounder.qpf b/gr-sounder/src/fpga/top/usrp_sounder.qpf new file mode 100644 index 000000000..aa75e962b --- /dev/null +++ b/gr-sounder/src/fpga/top/usrp_sounder.qpf @@ -0,0 +1,29 @@ +# Copyright (C) 1991-2004 Altera Corporation +# Any megafunction design, and related netlist (encrypted or decrypted), +# support information, device programming or simulation file, and any other +# associated documentation or information provided by Altera or a partner +# under Altera's Megafunction Partnership Program may be used only +# to program PLD devices (but not masked PLD devices) from Altera. Any +# other use of such megafunction design, netlist, support information, +# device programming or simulation file, or any other related documentation +# or information is prohibited for any other purpose, including, but not +# limited to modification, reverse engineering, de-compiling, or use with +# any other silicon devices, unless such use is explicitly licensed under +# a separate agreement with Altera or a megafunction partner. Title to the +# intellectual property, including patents, copyrights, trademarks, trade +# secrets, or maskworks, embodied in any such megafunction design, netlist, +# support information, device programming or simulation file, or any other +# related documentation or information provided by Altera or a megafunction +# partner, remains with Altera, the megafunction partner, or their respective +# licensors. No other licenses, including any licenses needed under any third +# party's intellectual property, are provided herein. + + + +QUARTUS_VERSION = "7.0" +DATE = "09:00:00 April 17, 2007" + + +# Active Revisions + +PROJECT_REVISION = "usrp_sounder" diff --git a/gr-sounder/src/fpga/top/usrp_sounder.qsf b/gr-sounder/src/fpga/top/usrp_sounder.qsf new file mode 100755 index 000000000..bda317db6 --- /dev/null +++ b/gr-sounder/src/fpga/top/usrp_sounder.qsf @@ -0,0 +1,392 @@ +# Copyright (C) 1991-2005 Altera Corporation
+# Your use of Altera Corporation's design tools, logic functions
+# and other software and tools, and its AMPP partner logic
+# functions, and any output files any of the foregoing
+# (including device programming or simulation files), and any
+# associated documentation or information are expressly subject
+# to the terms and conditions of the Altera Program License
+# Subscription Agreement, Altera MegaCore Function License
+# Agreement, or other applicable license agreement, including,
+# without limitation, that your use is for the sole purpose of
+# programming logic devices manufactured by Altera and sold by
+# Altera or its authorized distributors. Please refer to the
+# applicable agreement for further details.
+
+
+# The default values for assignments are stored in the file
+# usrp_sounder_assignment_defaults.qdf
+# If this file doesn't exist, and for assignments not listed, see file
+# assignment_defaults.qdf
+
+# Altera recommends that you do not modify this file. This
+# file is updated automatically by the Quartus II software
+# and any changes you make may be lost or overwritten.
+
+
+# Project-Wide Assignments
+# ========================
+set_global_assignment -name ORIGINAL_QUARTUS_VERSION 3.0
+set_global_assignment -name PROJECT_CREATION_TIME_DATE "00:14:04 JULY 13, 2003"
+set_global_assignment -name LAST_QUARTUS_VERSION 7.0
+
+# Pin & Location Assignments
+# ==========================
+set_global_assignment -name RESERVE_PIN "AS INPUT TRI-STATED"
+set_location_assignment PIN_29 -to SCLK
+set_location_assignment PIN_117 -to SDI
+set_location_assignment PIN_28 -to usbclk
+set_location_assignment PIN_107 -to usbctl[0]
+set_location_assignment PIN_106 -to usbctl[1]
+set_location_assignment PIN_105 -to usbctl[2]
+set_location_assignment PIN_100 -to usbdata[0]
+set_location_assignment PIN_84 -to usbdata[10]
+set_location_assignment PIN_83 -to usbdata[11]
+set_location_assignment PIN_82 -to usbdata[12]
+set_location_assignment PIN_79 -to usbdata[13]
+set_location_assignment PIN_78 -to usbdata[14]
+set_location_assignment PIN_77 -to usbdata[15]
+set_location_assignment PIN_99 -to usbdata[1]
+set_location_assignment PIN_98 -to usbdata[2]
+set_location_assignment PIN_95 -to usbdata[3]
+set_location_assignment PIN_94 -to usbdata[4]
+set_location_assignment PIN_93 -to usbdata[5]
+set_location_assignment PIN_88 -to usbdata[6]
+set_location_assignment PIN_87 -to usbdata[7]
+set_location_assignment PIN_86 -to usbdata[8]
+set_location_assignment PIN_85 -to usbdata[9]
+set_location_assignment PIN_104 -to usbrdy[0]
+set_location_assignment PIN_101 -to usbrdy[1]
+set_location_assignment PIN_76 -to FX2_1
+set_location_assignment PIN_75 -to FX2_2
+set_location_assignment PIN_74 -to FX2_3
+set_location_assignment PIN_116 -to io_rx_a[0]
+set_location_assignment PIN_115 -to io_rx_a[1]
+set_location_assignment PIN_114 -to io_rx_a[2]
+set_location_assignment PIN_113 -to io_rx_a[3]
+set_location_assignment PIN_108 -to io_rx_a[4]
+set_location_assignment PIN_195 -to io_rx_a[5]
+set_location_assignment PIN_196 -to io_rx_a[6]
+set_location_assignment PIN_197 -to io_rx_a[7]
+set_location_assignment PIN_200 -to io_rx_a[8]
+set_location_assignment PIN_201 -to io_rx_a[9]
+set_location_assignment PIN_202 -to io_rx_a[10]
+set_location_assignment PIN_203 -to io_rx_a[11]
+set_location_assignment PIN_206 -to io_rx_a[12]
+set_location_assignment PIN_207 -to io_rx_a[13]
+set_location_assignment PIN_208 -to io_rx_a[14]
+set_location_assignment PIN_214 -to io_rx_b[0]
+set_location_assignment PIN_215 -to io_rx_b[1]
+set_location_assignment PIN_216 -to io_rx_b[2]
+set_location_assignment PIN_217 -to io_rx_b[3]
+set_location_assignment PIN_218 -to io_rx_b[4]
+set_location_assignment PIN_219 -to io_rx_b[5]
+set_location_assignment PIN_222 -to io_rx_b[6]
+set_location_assignment PIN_223 -to io_rx_b[7]
+set_location_assignment PIN_224 -to io_rx_b[8]
+set_location_assignment PIN_225 -to io_rx_b[9]
+set_location_assignment PIN_226 -to io_rx_b[10]
+set_location_assignment PIN_227 -to io_rx_b[11]
+set_location_assignment PIN_228 -to io_rx_b[12]
+set_location_assignment PIN_233 -to io_rx_b[13]
+set_location_assignment PIN_234 -to io_rx_b[14]
+set_location_assignment PIN_175 -to io_tx_a[0]
+set_location_assignment PIN_176 -to io_tx_a[1]
+set_location_assignment PIN_177 -to io_tx_a[2]
+set_location_assignment PIN_178 -to io_tx_a[3]
+set_location_assignment PIN_179 -to io_tx_a[4]
+set_location_assignment PIN_180 -to io_tx_a[5]
+set_location_assignment PIN_181 -to io_tx_a[6]
+set_location_assignment PIN_182 -to io_tx_a[7]
+set_location_assignment PIN_183 -to io_tx_a[8]
+set_location_assignment PIN_184 -to io_tx_a[9]
+set_location_assignment PIN_185 -to io_tx_a[10]
+set_location_assignment PIN_186 -to io_tx_a[11]
+set_location_assignment PIN_187 -to io_tx_a[12]
+set_location_assignment PIN_188 -to io_tx_a[13]
+set_location_assignment PIN_193 -to io_tx_a[14]
+set_location_assignment PIN_73 -to io_tx_b[0]
+set_location_assignment PIN_68 -to io_tx_b[1]
+set_location_assignment PIN_67 -to io_tx_b[2]
+set_location_assignment PIN_66 -to io_tx_b[3]
+set_location_assignment PIN_65 -to io_tx_b[4]
+set_location_assignment PIN_64 -to io_tx_b[5]
+set_location_assignment PIN_63 -to io_tx_b[6]
+set_location_assignment PIN_62 -to io_tx_b[7]
+set_location_assignment PIN_61 -to io_tx_b[8]
+set_location_assignment PIN_60 -to io_tx_b[9]
+set_location_assignment PIN_59 -to io_tx_b[10]
+set_location_assignment PIN_58 -to io_tx_b[11]
+set_location_assignment PIN_57 -to io_tx_b[12]
+set_location_assignment PIN_56 -to io_tx_b[13]
+set_location_assignment PIN_55 -to io_tx_b[14]
+set_location_assignment PIN_152 -to master_clk
+set_location_assignment PIN_144 -to rx_a_a[0]
+set_location_assignment PIN_143 -to rx_a_a[1]
+set_location_assignment PIN_141 -to rx_a_a[2]
+set_location_assignment PIN_140 -to rx_a_a[3]
+set_location_assignment PIN_139 -to rx_a_a[4]
+set_location_assignment PIN_138 -to rx_a_a[5]
+set_location_assignment PIN_137 -to rx_a_a[6]
+set_location_assignment PIN_136 -to rx_a_a[7]
+set_location_assignment PIN_135 -to rx_a_a[8]
+set_location_assignment PIN_134 -to rx_a_a[9]
+set_location_assignment PIN_133 -to rx_a_a[10]
+set_location_assignment PIN_132 -to rx_a_a[11]
+set_location_assignment PIN_23 -to rx_a_b[0]
+set_location_assignment PIN_21 -to rx_a_b[1]
+set_location_assignment PIN_20 -to rx_a_b[2]
+set_location_assignment PIN_19 -to rx_a_b[3]
+set_location_assignment PIN_18 -to rx_a_b[4]
+set_location_assignment PIN_17 -to rx_a_b[5]
+set_location_assignment PIN_16 -to rx_a_b[6]
+set_location_assignment PIN_15 -to rx_a_b[7]
+set_location_assignment PIN_14 -to rx_a_b[8]
+set_location_assignment PIN_13 -to rx_a_b[9]
+set_location_assignment PIN_12 -to rx_a_b[10]
+set_location_assignment PIN_11 -to rx_a_b[11]
+set_location_assignment PIN_131 -to rx_b_a[0]
+set_location_assignment PIN_128 -to rx_b_a[1]
+set_location_assignment PIN_127 -to rx_b_a[2]
+set_location_assignment PIN_126 -to rx_b_a[3]
+set_location_assignment PIN_125 -to rx_b_a[4]
+set_location_assignment PIN_124 -to rx_b_a[5]
+set_location_assignment PIN_123 -to rx_b_a[6]
+set_location_assignment PIN_122 -to rx_b_a[7]
+set_location_assignment PIN_121 -to rx_b_a[8]
+set_location_assignment PIN_120 -to rx_b_a[9]
+set_location_assignment PIN_119 -to rx_b_a[10]
+set_location_assignment PIN_118 -to rx_b_a[11]
+set_location_assignment PIN_8 -to rx_b_b[0]
+set_location_assignment PIN_7 -to rx_b_b[1]
+set_location_assignment PIN_6 -to rx_b_b[2]
+set_location_assignment PIN_5 -to rx_b_b[3]
+set_location_assignment PIN_4 -to rx_b_b[4]
+set_location_assignment PIN_3 -to rx_b_b[5]
+set_location_assignment PIN_2 -to rx_b_b[6]
+set_location_assignment PIN_240 -to rx_b_b[7]
+set_location_assignment PIN_239 -to rx_b_b[8]
+set_location_assignment PIN_238 -to rx_b_b[9]
+set_location_assignment PIN_237 -to rx_b_b[10]
+set_location_assignment PIN_236 -to rx_b_b[11]
+set_location_assignment PIN_156 -to SDO
+set_location_assignment PIN_153 -to SEN_FPGA
+set_location_assignment PIN_159 -to tx_a[0]
+set_location_assignment PIN_160 -to tx_a[1]
+set_location_assignment PIN_161 -to tx_a[2]
+set_location_assignment PIN_162 -to tx_a[3]
+set_location_assignment PIN_163 -to tx_a[4]
+set_location_assignment PIN_164 -to tx_a[5]
+set_location_assignment PIN_165 -to tx_a[6]
+set_location_assignment PIN_166 -to tx_a[7]
+set_location_assignment PIN_167 -to tx_a[8]
+set_location_assignment PIN_168 -to tx_a[9]
+set_location_assignment PIN_169 -to tx_a[10]
+set_location_assignment PIN_170 -to tx_a[11]
+set_location_assignment PIN_173 -to tx_a[12]
+set_location_assignment PIN_174 -to tx_a[13]
+set_location_assignment PIN_38 -to tx_b[0]
+set_location_assignment PIN_39 -to tx_b[1]
+set_location_assignment PIN_41 -to tx_b[2]
+set_location_assignment PIN_42 -to tx_b[3]
+set_location_assignment PIN_43 -to tx_b[4]
+set_location_assignment PIN_44 -to tx_b[5]
+set_location_assignment PIN_45 -to tx_b[6]
+set_location_assignment PIN_46 -to tx_b[7]
+set_location_assignment PIN_47 -to tx_b[8]
+set_location_assignment PIN_48 -to tx_b[9]
+set_location_assignment PIN_49 -to tx_b[10]
+set_location_assignment PIN_50 -to tx_b[11]
+set_location_assignment PIN_53 -to tx_b[12]
+set_location_assignment PIN_54 -to tx_b[13]
+set_location_assignment PIN_158 -to TXSYNC_A
+set_location_assignment PIN_37 -to TXSYNC_B
+set_location_assignment PIN_235 -to io_rx_b[15]
+set_location_assignment PIN_24 -to io_tx_b[15]
+set_location_assignment PIN_213 -to io_rx_a[15]
+set_location_assignment PIN_194 -to io_tx_a[15]
+set_location_assignment PIN_1 -to MYSTERY_SIGNAL
+
+# Timing Assignments
+# ==================
+set_global_assignment -name INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS OFF
+
+# Analysis & Synthesis Assignments
+# ================================
+set_global_assignment -name SAVE_DISK_SPACE OFF
+set_global_assignment -name DEVICE_FILTER_PACKAGE "ANY QFP"
+set_global_assignment -name DEVICE_FILTER_PIN_COUNT 240
+set_global_assignment -name EDA_DESIGN_ENTRY_SYNTHESIS_TOOL "<None>"
+set_global_assignment -name FAMILY Cyclone
+set_global_assignment -name CYCLONE_OPTIMIZATION_TECHNIQUE BALANCED
+set_global_assignment -name STRATIX_OPTIMIZATION_TECHNIQUE SPEED
+set_global_assignment -name APEX20K_OPTIMIZATION_TECHNIQUE SPEED
+set_global_assignment -name TOP_LEVEL_ENTITY usrp_sounder
+set_global_assignment -name VHDL_SHOW_LMF_MAPPING_MESSAGES OFF
+set_global_assignment -name USER_LIBRARIES "h:\\gnuradio\\trunk\\usrp\\fpga\\megacells"
+set_global_assignment -name AUTO_ENABLE_SMART_COMPILE ON
+
+# Fitter Assignments
+# ==================
+set_global_assignment -name DEVICE EP1C12Q240C8
+set_global_assignment -name CYCLONE_CONFIGURATION_SCHEME "PASSIVE SERIAL"
+set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED"
+set_global_assignment -name OPTIMIZE_HOLD_TIMING OFF
+set_global_assignment -name OPTIMIZE_TIMING "NORMAL COMPILATION"
+set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC OFF
+set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION OFF
+set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_RETIMING OFF
+set_global_assignment -name IO_PLACEMENT_OPTIMIZATION OFF
+set_global_assignment -name PHYSICAL_SYNTHESIS_EFFORT NORMAL
+set_global_assignment -name INC_PLC_MODE OFF
+set_global_assignment -name ROUTING_BACK_ANNOTATION_MODE OFF
+set_instance_assignment -name IO_STANDARD LVTTL -to usbdata[12]
+set_global_assignment -name STRATIX_DEVICE_IO_STANDARD LVTTL
+set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1
+
+# Timing Analysis Assignments
+# ===========================
+set_global_assignment -name MAX_SCC_SIZE 50
+
+# EDA Netlist Writer Assignments
+# ==============================
+set_global_assignment -name EDA_SIMULATION_TOOL "<None>"
+set_global_assignment -name EDA_TIMING_ANALYSIS_TOOL "<NONE>"
+set_global_assignment -name EDA_BOARD_DESIGN_TOOL "<NONE>"
+set_global_assignment -name EDA_FORMAL_VERIFICATION_TOOL "<NONE>"
+set_global_assignment -name EDA_RESYNTHESIS_TOOL "<NONE>"
+
+# Assembler Assignments
+# =====================
+set_global_assignment -name USE_CONFIGURATION_DEVICE OFF
+set_global_assignment -name GENERATE_RBF_FILE ON
+set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "AS INPUT TRI-STATED"
+set_global_assignment -name AUTO_RESTART_CONFIGURATION OFF
+
+# Simulator Assignments
+# =====================
+set_global_assignment -name START_TIME "0 ns"
+set_global_assignment -name GLITCH_INTERVAL "1 ns"
+
+# Design Assistant Assignments
+# ============================
+set_global_assignment -name DRC_REPORT_TOP_FANOUT OFF
+set_global_assignment -name DRC_REPORT_FANOUT_EXCEEDING OFF
+set_global_assignment -name ASSG_CAT OFF
+set_global_assignment -name ASSG_RULE_MISSING_FMAX OFF
+set_global_assignment -name ASSG_RULE_MISSING_TIMING OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_ASYN_RAM OFF
+set_global_assignment -name CLK_CAT OFF
+set_global_assignment -name CLK_RULE_COMB_CLOCK OFF
+set_global_assignment -name CLK_RULE_INV_CLOCK OFF
+set_global_assignment -name CLK_RULE_GATING_SCHEME OFF
+set_global_assignment -name CLK_RULE_INPINS_CLKNET OFF
+set_global_assignment -name CLK_RULE_CLKNET_CLKSPINES OFF
+set_global_assignment -name CLK_RULE_MIX_EDGES OFF
+set_global_assignment -name RESET_CAT OFF
+set_global_assignment -name RESET_RULE_INPINS_RESETNET OFF
+set_global_assignment -name RESET_RULE_UNSYNCH_EXRESET OFF
+set_global_assignment -name RESET_RULE_IMSYNCH_EXRESET OFF
+set_global_assignment -name RESET_RULE_COMB_ASYNCH_RESET OFF
+set_global_assignment -name RESET_RULE_UNSYNCH_ASYNCH_DOMAIN OFF
+set_global_assignment -name RESET_RULE_IMSYNCH_ASYNCH_DOMAIN OFF
+set_global_assignment -name TIMING_CAT OFF
+set_global_assignment -name TIMING_RULE_SHIFT_REG OFF
+set_global_assignment -name TIMING_RULE_COIN_CLKEDGE OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE OFF
+set_global_assignment -name NONSYNCHSTRUCT_CAT OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_COMBLOOP OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_REG_LOOP OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_DELAY_CHAIN OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_RIPPLE_CLK OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_SRLATCH OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED OFF
+set_global_assignment -name SIGNALRACE_CAT OFF
+set_global_assignment -name ACLK_CAT OFF
+set_global_assignment -name ACLK_RULE_NO_SZER_ACLK_DOMAIN OFF
+set_global_assignment -name ACLK_RULE_SZER_BTW_ACLK_DOMAIN OFF
+set_global_assignment -name ACLK_RULE_IMSZER_ADOMAIN OFF
+set_global_assignment -name HCPY_CAT OFF
+set_global_assignment -name HCPY_VREF_PINS OFF
+
+# SignalTap II Assignments
+# ========================
+set_global_assignment -name HUB_ENTITY_NAME SLD_HUB
+set_global_assignment -name HUB_INSTANCE_NAME SLD_HUB_INST
+set_global_assignment -name ENABLE_SIGNALTAP OFF
+
+# LogicLock Region Assignments
+# ============================
+set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT OFF
+
+# -----------------
+# start CLOCK(SCLK)
+
+ # Timing Assignments
+ # ==================
+set_global_assignment -name DUTY_CYCLE 50 -section_id SCLK
+set_global_assignment -name FMAX_REQUIREMENT "1 MHz" -section_id SCLK
+
+# end CLOCK(SCLK)
+# ---------------
+
+# -----------------------
+# start CLOCK(master_clk)
+
+ # Timing Assignments
+ # ==================
+set_global_assignment -name DUTY_CYCLE 50 -section_id master_clk
+set_global_assignment -name FMAX_REQUIREMENT "64 MHz" -section_id master_clk
+
+# end CLOCK(master_clk)
+# ---------------------
+
+# -------------------
+# start CLOCK(usbclk)
+
+ # Timing Assignments
+ # ==================
+set_global_assignment -name DUTY_CYCLE 50 -section_id usbclk
+set_global_assignment -name FMAX_REQUIREMENT "48 MHz" -section_id usbclk
+
+# end CLOCK(usbclk)
+# -----------------
+
+# ----------------------
+# start ENTITY(usrp_sounder)
+
+ # Timing Assignments
+ # ==================
+set_instance_assignment -name CLOCK_SETTINGS SCLK -to SCLK
+set_instance_assignment -name CLOCK_SETTINGS usbclk -to usbclk
+set_instance_assignment -name CLOCK_SETTINGS master_clk -to master_clk
+
+# end ENTITY(usrp_sounder)
+# --------------------
+
+set_instance_assignment -name PARTITION_HIERARCHY no_file_for_top_partition -to | -section_id Top
+set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top
+
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/sign_extend.v
+set_global_assignment -name VERILOG_FILE ../lib/lfsr_constants.v
+set_global_assignment -name VERILOG_FILE ../lib/sounder.v
+set_global_assignment -name VERILOG_FILE ../lib/lfsr.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/atr_delay.v
+set_global_assignment -name VERILOG_FILE ../lib/dac_interface.v
+set_global_assignment -name VERILOG_FILE ../lib/dacpll.v
+set_global_assignment -name VERILOG_FILE ../lib/sounder_rx.v
+set_global_assignment -name VERILOG_FILE ../lib/sounder_tx.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/rx_buffer.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/setting_reg.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/strobe_gen.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/clk_divider.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/bidir_reg.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/adc_interface.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/gen_sync.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/io_pins.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/master_control.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/rssi.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/rx_dcoffset.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/serial_io.v
+set_global_assignment -name VERILOG_FILE usrp_sounder.v
\ No newline at end of file diff --git a/gr-sounder/src/fpga/top/usrp_sounder.v b/gr-sounder/src/fpga/top/usrp_sounder.v new file mode 100644 index 000000000..05b71bbbd --- /dev/null +++ b/gr-sounder/src/fpga/top/usrp_sounder.v @@ -0,0 +1,199 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2003,2004 Matt Ettus +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +// Top level module for a full setup with DUCs and DDCs + +// Define DEBUG_OWNS_IO_PINS if we're using the daughterboard i/o pins +// for debugging info. NB, This can kill the m'board and/or d'board if you +// have anything except basic d'boards installed. + +// Uncomment the following to include optional circuitry + +module usrp_sounder +(output MYSTERY_SIGNAL, + input master_clk, + input SCLK, + input SDI, + inout SDO, + input SEN_FPGA, + + input FX2_1, + output FX2_2, + output FX2_3, + + input wire [11:0] rx_a_a, + input wire [11:0] rx_b_a, + input wire [11:0] rx_a_b, + input wire [11:0] rx_b_b, + + output wire [13:0] tx_a, + output wire [13:0] tx_b, + + output wire TXSYNC_A, + output wire TXSYNC_B, + + // USB interface + input usbclk, + input wire [2:0] usbctl, + output wire [1:0] usbrdy, + inout [15:0] usbdata, // NB Careful, inout + + // These are the general purpose i/o's that go to the daughterboard slots + inout wire [15:0] io_tx_a, + inout wire [15:0] io_tx_b, + inout wire [15:0] io_rx_a, + inout wire [15:0] io_rx_b + ); + wire [15:0] debugdata,debugctrl; + assign MYSTERY_SIGNAL = 1'b0; + + wire clk64; + + // wire WR = usbctl[0]; + wire RD = usbctl[1]; + wire OE = usbctl[2]; + + wire have_pkt_rdy; + assign usbrdy[0] = 1'b0; // have_space; + assign usbrdy[1] = have_pkt_rdy; + + wire tx_underrun, rx_overrun; + wire clear_status = FX2_1; + assign FX2_2 = rx_overrun; + assign FX2_3 = 1'b0; // tx_underrun; + + wire [15:0] usbdata_out; + + wire [3:0] rx_numchan; + wire enable_tx, enable_rx; + wire tx_dsp_reset, rx_dsp_reset, tx_bus_reset, rx_bus_reset; + + // Tri-state bus macro + bustri bustri( .data(usbdata_out),.enabledt(OE),.tridata(usbdata) ); + + assign clk64 = master_clk; + + // TX + wire tx_sample_strobe; + wire tx_empty; + + wire serial_strobe; + wire [6:0] serial_addr; + wire [31:0] serial_data; + + //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // Transmit Side + + wire [15:0] tx_i, tx_q; + wire [15:0] tx_dac; + + dac_interface dac(.clk_i(clk64),.rst_i(tx_dsp_reset),.ena_i(enable_tx), + .strobe_i(tx_sample_strobe),.tx_i_i(tx_i),.tx_q_i(tx_q), + .tx_data_o(tx_dac),.tx_sync_o(TXSYNC_A)); + + assign tx_a = tx_dac[15:2]; + + // Wedge DAC #2 at zero + assign TXSYNC_B = 1'b0; + assign tx_b = 14'b0; + + ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // Receive Side + wire rx_sample_strobe, rx_strobe; + wire [15:0] rx_adc0_i, rx_adc0_q; + wire [15:0] rx_buf_i, rx_buf_q; + + adc_interface adc_interface(.clock(clk64),.reset(rx_dsp_reset),.enable(enable_rx), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .rx_a_a(rx_a_a),.rx_b_a(rx_b_a),.rx_a_b(),.rx_b_b(), + .rssi_0(),.rssi_1(),.rssi_2(),.rssi_3(), + .ddc0_in_i(rx_adc0_i),.ddc0_in_q(rx_adc0_q), + .ddc1_in_i(),.ddc1_in_q(), + .ddc2_in_i(),.ddc2_in_q(), + .ddc3_in_i(),.ddc3_in_q(),.rx_numchan(rx_numchan) ); + + rx_buffer rx_buffer + ( .usbclk(usbclk),.bus_reset(rx_bus_reset),.reset(rx_dsp_reset), + .reset_regs(rx_dsp_reset), + .usbdata(usbdata_out),.RD(RD),.have_pkt_rdy(have_pkt_rdy),.rx_overrun(rx_overrun), + .channels(rx_numchan), + .ch_0(rx_buf_i),.ch_1(rx_buf_q), + .ch_2(),.ch_3(), + .ch_4(),.ch_5(), + .ch_6(),.ch_7(), + .rxclk(clk64),.rxstrobe(rx_strobe), + .clear_status(clear_status), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .debugbus() ); + + + /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // Top level application + + sounder sounder + ( .clk_i(clk64),.saddr_i(serial_addr),.sdata_i(serial_data),.s_strobe_i(serial_strobe), + .tx_rst_i(tx_dsp_reset),.tx_enable_i(enable_tx),.tx_strobe_i(tx_sample_strobe), + .tx_dac_i_o(tx_i),.tx_dac_q_o(tx_q), + .rx_rst_i(rx_dsp_reset),.rx_enable_i(enable_rx),.rx_strobe_i(rx_sample_strobe),.rx_strobe_o(rx_strobe), + .rx_adc_i_i(rx_adc0_i),.rx_adc_q_i(rx_adc0_q),.rx_imp_i_o(rx_buf_i),.rx_imp_q_o(rx_buf_q) + ); + + + /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // Control Functions + + wire [31:0] capabilities; + assign capabilities[7] = 0; // `TX_CAP_HB; + assign capabilities[6:4] = 2; // `TX_CAP_NCHAN; + assign capabilities[3] = 0; // `RX_CAP_HB; + assign capabilities[2:0] = 2; // `RX_CAP_NCHAN; + + serial_io serial_io + ( .master_clk(clk64),.serial_clock(SCLK),.serial_data_in(SDI), + .enable(SEN_FPGA),.reset(1'b0),.serial_data_out(SDO), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .readback_0(),.readback_1(),.readback_2(capabilities),.readback_3(), + .readback_4(),.readback_5(),.readback_6(),.readback_7() + ); + + wire [15:0] reg_0,reg_1,reg_2,reg_3; + master_control master_control + ( .master_clk(clk64),.usbclk(usbclk), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .tx_bus_reset(tx_bus_reset),.rx_bus_reset(rx_bus_reset), + .tx_dsp_reset(tx_dsp_reset),.rx_dsp_reset(rx_dsp_reset), + .enable_tx(enable_tx),.enable_rx(enable_rx), + .interp_rate(),.decim_rate(), + .tx_sample_strobe(tx_sample_strobe),.strobe_interp(), + .rx_sample_strobe(rx_sample_strobe),.strobe_decim(), + .tx_empty(tx_empty), + .debug_0(),.debug_1(), + .debug_2(),.debug_3(), + .reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3) ); + + io_pins io_pins + (.io_0(io_tx_a),.io_1(io_rx_a),.io_2(io_tx_b),.io_3(io_rx_b), + .reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3), + .clock(clk64),.rx_reset(rx_dsp_reset),.tx_reset(tx_dsp_reset), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe)); + +endmodule // usrp_sounder diff --git a/gr-sounder/src/lib/Makefile.am b/gr-sounder/src/lib/Makefile.am new file mode 100644 index 000000000..1ae19f1b5 --- /dev/null +++ b/gr-sounder/src/lib/Makefile.am @@ -0,0 +1,22 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +include $(top_srcdir)/Makefile.common diff --git a/gr-sounder/src/python/Makefile.am b/gr-sounder/src/python/Makefile.am new file mode 100644 index 000000000..ecc9d8398 --- /dev/null +++ b/gr-sounder/src/python/Makefile.am @@ -0,0 +1,32 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +include $(top_srcdir)/Makefile.common + +EXTRA_DIST = \ + usrp_sounder.py \ + qa_nothing.py \ + run_tests.in + +bin_SCRIPTS = \ + usrp_sounder.py + +MOSTLYCLEANFILES = *~ *.pyc *.pyo diff --git a/gr-sounder/src/python/qa_nothing.py b/gr-sounder/src/python/qa_nothing.py new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/gr-sounder/src/python/qa_nothing.py diff --git a/gr-sounder/src/python/run_tests.in b/gr-sounder/src/python/run_tests.in new file mode 100644 index 000000000..b8f7830c2 --- /dev/null +++ b/gr-sounder/src/python/run_tests.in @@ -0,0 +1,10 @@ +#!/bin/sh + +# 1st parameter is absolute path to component source directory +# 2nd parameter is absolute path to component build directory +# 3rd parameter is path to Python QA directory + +@top_builddir@/run_tests.sh \ + @abs_top_srcdir@/gr-sounder \ + @abs_top_builddir@/gr-sounder \ + @srcdir@ diff --git a/gr-sounder/src/python/usrp_sounder.py b/gr-sounder/src/python/usrp_sounder.py new file mode 100755 index 000000000..ca722a494 --- /dev/null +++ b/gr-sounder/src/python/usrp_sounder.py @@ -0,0 +1,130 @@ +#!/usr/bin/env python +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +from gnuradio import gr, usrp +from gnuradio import eng_notation +from gnuradio.eng_option import eng_option +from optparse import OptionParser +import sys, time + +n2s = eng_notation.num_to_str + +# Set to 0 for 32 MHz tx clock, 1 for 64 MHz tx clock +# Must match config.vh in FPGA code +TX_RATE_MAX = 0 +_tx_freq_divisor = 32e6*(TX_RATE_MAX+1) + +class sounder_tx: + def __init__(self, frequency, degree, loopback): + self.trans = usrp.sink_s(fpga_filename='usrp_sounder.rbf') + self.subdev_spec = usrp.pick_tx_subdevice(self.trans) + self.subdev = usrp.selected_subdev(self.trans, self.subdev_spec) + self.trans.tune(0, self.subdev, frequency) + self.set_degree(degree); + self.set_loopback(loopback) + + def turn_on(self): + self.trans.start() + + def turn_off(self): + self.trans.stop() + + def set_degree(self, value): + return self.trans._write_fpga_reg(usrp.FR_USER_0, value); + + def set_loopback(self, value): + return self.trans._write_fpga_reg(usrp.FR_USER_1, value==True); + +class sounder_rx: + def __init__(self, frequency, degree, samples): + self.fg = gr.flow_graph() + self.rcvr = usrp.source_s(fpga_filename='usrp_sounder.rbf', decim_rate=8) + self.subdev_spec = usrp.pick_rx_subdevice(self.rcvr) + self.subdev = usrp.selected_subdev(self.rcvr, self.subdev_spec) + self.rcvr.tune(0, self.subdev, frequency) + self.set_degree(degree); + self.sink = gr.file_sink(gr.sizeof_short, "output.dat") + + if samples >= 0: + self.head = gr.head(gr.sizeof_short, 2*samples*gr.sizeof_short) + self.fg.connect(self.rcvr, self.head, self.sink) + else: + self.fg.connect(self.rcvr, self.sink) + + def receive(self): + self.fg.run() + + def set_degree(self, value): + return self.rcvr._write_fpga_reg(usrp.FR_USER_0, value); + +def main(): + parser = OptionParser(option_class=eng_option) + parser.add_option("-f", "--frequency", type="eng_float", default=0.0, + help="set frequency to FREQ in Hz, default is %default", metavar="FREQ") + + parser.add_option("-t", "--transmit", action="store_true", default=False, + help="enable sounding transmitter") + + parser.add_option("-r", "--receive", action="store_true", default=False, + help="enable sounding receiver") + + parser.add_option("-d", "--degree", type="int", default=16, + help="set souding sequence degree (len=2^degree-1), default is %default") + + parser.add_option("-n", "--samples", type="int", default=-1, + help="number of samples to capture on receive, default is infinite") + + parser.add_option("-l", "--loopback", action="store_true", default=False, + help="enable digital loopback, default is disabled") + + (options, args) = parser.parse_args() + + if len(args) != 0 or not (options.transmit | options.receive): + parser.print_help() + sys.exit(1) + + print "Using PN code degree of", options.degree, "length", 2**options.degree-1 + print "Sounding frequency range is", n2s(options.frequency-16e6), "to", n2s(options.frequency+16e6) + + if (options.transmit): + print "Enabling sounder transmitter." + if (options.loopback): + print "Enabling digital loopback." + tx = sounder_tx(options.frequency, options.degree, options.loopback) + tx.turn_on() + + try: + if (options.receive): + print "Enabling sounder receiver." + rx = sounder_rx(options.frequency, options.degree, options.samples) + rx.receive() + else: + if (options.transmit): + while (True): time.sleep(1.0) + + except KeyboardInterrupt: + if (options.transmit): + tx.turn_off() + + +if __name__ == "__main__": + main() |