diff options
Diffstat (limited to 'gnuradio-core/src')
17 files changed, 0 insertions, 2567 deletions
diff --git a/gnuradio-core/src/guile/tests/general_ctors.test b/gnuradio-core/src/guile/tests/general_ctors.test index 244249dd8..76198f103 100644 --- a/gnuradio-core/src/guile/tests/general_ctors.test +++ b/gnuradio-core/src/guile/tests/general_ctors.test @@ -71,9 +71,6 @@ ;;; ./general/gr_bin_statistics_f.h WONTFIX: requires gr_feval_dd & swig directors ;;;(pass-if (true? (gr:bin-statistics-f 1 (gr:msg-queue) 0 0 0))) -;;; ./general/gr_binary_slicer_fb.h -(pass-if (true? (gr:binary-slicer-fb))) - ;;; ./general/gr_bytes_to_syms.h (pass-if (true? (gr:bytes-to-syms))) @@ -108,9 +105,6 @@ ;;; ./general/gr_conjugate_cc.h (pass-if (true? (gr:conjugate-cc))) -;;; ./general/gr_constellation_decoder_cb.h -(pass-if (true? (gr:constellation-decoder-cb #(2+3i 23+5i) #(0 1)))) - ;;; ./general/gr_copy.h (pass-if (true? (gr:copy 1))) diff --git a/gnuradio-core/src/lib/general/Makefile.am b/gnuradio-core/src/lib/general/Makefile.am index defbbbb0c..a58f88594 100644 --- a/gnuradio-core/src/lib/general/Makefile.am +++ b/gnuradio-core/src/lib/general/Makefile.am @@ -44,7 +44,6 @@ libgeneral_la_SOURCES = \ gr_agc2_ff.cc \ gr_align_on_samplenumbers_ss.cc \ gr_bin_statistics_f.cc \ - gr_binary_slicer_fb.cc \ gr_bytes_to_syms.cc \ gr_char_to_float.cc \ gr_check_counting_s.cc \ @@ -56,7 +55,6 @@ libgeneral_la_SOURCES = \ gr_complex_to_xxx.cc \ gr_conjugate_cc.cc \ gr_copy.cc \ - gr_constellation_decoder_cb.cc \ gr_correlate_access_code_bb.cc \ gr_costas_loop_cc.cc \ gr_count_bits.cc \ @@ -202,7 +200,6 @@ grinclude_HEADERS = \ gr_agc2_ff.h \ gr_align_on_samplenumbers_ss.h \ gr_bin_statistics_f.h \ - gr_binary_slicer_fb.h \ gr_bytes_to_syms.h \ gr_char_to_float.h \ gr_check_counting_s.h \ @@ -213,7 +210,6 @@ grinclude_HEADERS = \ gr_complex_to_interleaved_short.h \ gr_complex_to_xxx.h \ gr_conjugate_cc.h \ - gr_constellation_decoder_cb.h \ gr_copy.h \ gr_correlate_access_code_bb.h \ gr_costas_loop_cc.h \ @@ -378,7 +374,6 @@ swiginclude_HEADERS = \ gr_agc2_ff.i \ gr_align_on_samplenumbers_ss.i \ gr_bin_statistics_f.i \ - gr_binary_slicer_fb.i \ gr_bytes_to_syms.i \ gr_char_to_float.i \ gr_check_counting_s.i \ @@ -388,7 +383,6 @@ swiginclude_HEADERS = \ gr_complex_to_interleaved_short.i \ gr_complex_to_xxx.i \ gr_conjugate_cc.i \ - gr_constellation_decoder_cb.i \ gr_copy.i \ gr_correlate_access_code_bb.i \ gr_costas_loop_cc.i \ diff --git a/gnuradio-core/src/lib/general/general.i b/gnuradio-core/src/lib/general/general.i index 5a5534129..0dde39a66 100644 --- a/gnuradio-core/src/lib/general/general.i +++ b/gnuradio-core/src/lib/general/general.i @@ -112,8 +112,6 @@ #include <gr_unpack_k_bits_bb.h> #include <gr_correlate_access_code_bb.h> #include <gr_diff_phasor_cc.h> -#include <gr_constellation_decoder_cb.h> -#include <gr_binary_slicer_fb.h> #include <gr_diff_encoder_bb.h> #include <gr_diff_decoder_bb.h> #include <gr_framer_sink_1.h> @@ -239,8 +237,6 @@ %include "gr_unpack_k_bits_bb.i" %include "gr_correlate_access_code_bb.i" %include "gr_diff_phasor_cc.i" -%include "gr_constellation_decoder_cb.i" -%include "gr_binary_slicer_fb.i" %include "gr_diff_encoder_bb.i" %include "gr_diff_decoder_bb.i" %include "gr_framer_sink_1.i" diff --git a/gnuradio-core/src/lib/general/gr_binary_slicer_fb.cc b/gnuradio-core/src/lib/general/gr_binary_slicer_fb.cc deleted file mode 100644 index ae8903abb..000000000 --- a/gnuradio-core/src/lib/general/gr_binary_slicer_fb.cc +++ /dev/null @@ -1,64 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2006,2010 Free Software Foundation, Inc. - * - * This file is part of GNU Radio - * - * GNU Radio is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 3, or (at your option) - * any later version. - * - * GNU Radio is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with GNU Radio; see the file COPYING. If not, write to - * the Free Software Foundation, Inc., 51 Franklin Street, - * Boston, MA 02110-1301, USA. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include <gr_binary_slicer_fb.h> -#include <gr_io_signature.h> -#include <stdexcept> - -gr_binary_slicer_fb_sptr -gr_make_binary_slicer_fb () -{ - return gnuradio::get_initial_sptr(new gr_binary_slicer_fb ()); -} - -gr_binary_slicer_fb::gr_binary_slicer_fb () - : gr_sync_block ("binary_slicer_fb", - gr_make_io_signature (1, 1, sizeof (float)), - gr_make_io_signature (1, 1, sizeof (unsigned char))) -{ -} - -static inline int -slice(float x) -{ - return x < 0 ? 0 : 1; -} - -int -gr_binary_slicer_fb::work (int noutput_items, - gr_vector_const_void_star &input_items, - gr_vector_void_star &output_items) -{ - const float *in = (const float *) input_items[0]; - unsigned char *out = (unsigned char *) output_items[0]; - - - for (int i = 0; i < noutput_items; i++){ - out[i] = slice(in[i]); - } - - return noutput_items; -} diff --git a/gnuradio-core/src/lib/general/gr_binary_slicer_fb.h b/gnuradio-core/src/lib/general/gr_binary_slicer_fb.h deleted file mode 100644 index 2aa4a0828..000000000 --- a/gnuradio-core/src/lib/general/gr_binary_slicer_fb.h +++ /dev/null @@ -1,51 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2006 Free Software Foundation, Inc. - * - * This file is part of GNU Radio - * - * GNU Radio is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 3, or (at your option) - * any later version. - * - * GNU Radio is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with GNU Radio; see the file COPYING. If not, write to - * the Free Software Foundation, Inc., 51 Franklin Street, - * Boston, MA 02110-1301, USA. - */ - -#ifndef INCLUDED_GR_BINARY_SLICER_FB_H -#define INCLUDED_GR_BINARY_SLICER_FB_H - -#include <gr_sync_block.h> - -class gr_binary_slicer_fb; -typedef boost::shared_ptr<gr_binary_slicer_fb> gr_binary_slicer_fb_sptr; - -gr_binary_slicer_fb_sptr gr_make_binary_slicer_fb (); - -/*! - * \brief slice float binary symbol outputting 1 bit output - * \ingroup converter_blk - * - * x < 0 --> 0 - * x >= 0 --> 1 - */ -class gr_binary_slicer_fb : public gr_sync_block -{ - friend gr_binary_slicer_fb_sptr gr_make_binary_slicer_fb (); - gr_binary_slicer_fb (); - - public: - int work (int noutput_items, - gr_vector_const_void_star &input_items, - gr_vector_void_star &output_items); -}; - -#endif diff --git a/gnuradio-core/src/lib/general/gr_binary_slicer_fb.i b/gnuradio-core/src/lib/general/gr_binary_slicer_fb.i deleted file mode 100644 index b6f4e9312..000000000 --- a/gnuradio-core/src/lib/general/gr_binary_slicer_fb.i +++ /dev/null @@ -1,33 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2006 Free Software Foundation, Inc. - * - * This file is part of GNU Radio - * - * GNU Radio is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 3, or (at your option) - * any later version. - * - * GNU Radio is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with GNU Radio; see the file COPYING. If not, write to - * the Free Software Foundation, Inc., 51 Franklin Street, - * Boston, MA 02110-1301, USA. - */ - -GR_SWIG_BLOCK_MAGIC(gr,binary_slicer_fb); - -gr_binary_slicer_fb_sptr gr_make_binary_slicer_fb (); - -class gr_binary_slicer_fb : public gr_sync_block -{ - private: - gr_binary_slicer_fb (); - - public: -}; diff --git a/gnuradio-core/src/lib/general/gr_constellation_decoder_cb.cc b/gnuradio-core/src/lib/general/gr_constellation_decoder_cb.cc deleted file mode 100644 index 5b87f1430..000000000 --- a/gnuradio-core/src/lib/general/gr_constellation_decoder_cb.cc +++ /dev/null @@ -1,114 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2006 Free Software Foundation, Inc. - * - * This file is part of GNU Radio - * - * GNU Radio is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 3, or (at your option) - * any later version. - * - * GNU Radio is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with GNU Radio; see the file COPYING. If not, write to - * the Free Software Foundation, Inc., 51 Franklin Street, - * Boston, MA 02110-1301, USA. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include <gr_constellation_decoder_cb.h> -#include <gr_io_signature.h> -#include <stdexcept> - -#include <cstdio> -#include <iostream> -using std::cout; -using std::endl; - -static const bool compute_EVM = false; - -gr_constellation_decoder_cb_sptr -gr_make_constellation_decoder_cb (const std::vector<gr_complex> &sym_position, - const std::vector<unsigned char> &sym_value_out) -{ - return gr_constellation_decoder_cb_sptr - (new gr_constellation_decoder_cb(sym_position, sym_value_out)); -} - -gr_constellation_decoder_cb:: -gr_constellation_decoder_cb (const std::vector<gr_complex> &sym_position, - const std::vector<unsigned char> &sym_value_out) - : gr_sync_block ("constellation_decoder_cb", - gr_make_io_signature (1, 1, sizeof (gr_complex)), - gr_make_io_signature (1, 1, sizeof (unsigned char))) -{ - if (!set_constellation(sym_position,sym_value_out)) - throw std::invalid_argument("constellation_decoder_cb"); -} - - -gr_constellation_decoder_cb::~gr_constellation_decoder_cb(){} - - -bool -gr_constellation_decoder_cb::set_constellation(const std::vector<gr_complex> &sym_position, - const std::vector<unsigned char> &sym_value_out) -{ - if (sym_position.size() != sym_value_out.size()) - return false; - - if (sym_position.size()<1) - return false; - - d_sym_position = sym_position; - d_sym_value_out = sym_value_out; - return true; -} - - -int -gr_constellation_decoder_cb::work(int noutput_items, - gr_vector_const_void_star &input_items, - gr_vector_void_star &output_items) -{ - gr_complex const *in = (const gr_complex *) input_items[0]; - unsigned char *out = (unsigned char *) output_items[0]; - unsigned int table_size = d_sym_value_out.size(); - unsigned int min_index = 0; - float min_euclid_dist = 0; - float euclid_dist = 0; - double total_error = 0; - - for(int i = 0; i < noutput_items; i++){ - min_euclid_dist = norm(in[i] - d_sym_position[0]); - min_index = 0; - for (unsigned int j = 1; j < table_size; j++){ - euclid_dist = norm(in[i] - d_sym_position[j]); - if (euclid_dist < min_euclid_dist){ - min_euclid_dist = euclid_dist; - min_index = j; - } - } - - out[i] = d_sym_value_out[min_index]; - - if (compute_EVM) - total_error += sqrtf(min_euclid_dist); - } - - if (compute_EVM){ - double mean = total_error / noutput_items; - double rms = sqrt(mean * mean); - fprintf(stderr, "EVM = %8.4f\n", rms); - } - - return noutput_items; -} diff --git a/gnuradio-core/src/lib/general/gr_constellation_decoder_cb.h b/gnuradio-core/src/lib/general/gr_constellation_decoder_cb.h deleted file mode 100644 index fd7079c12..000000000 --- a/gnuradio-core/src/lib/general/gr_constellation_decoder_cb.h +++ /dev/null @@ -1,65 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2006 Free Software Foundation, Inc. - * - * This file is part of GNU Radio - * - * GNU Radio is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 3, or (at your option) - * any later version. - * - * GNU Radio is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with GNU Radio; see the file COPYING. If not, write to - * the Free Software Foundation, Inc., 51 Franklin Street, - * Boston, MA 02110-1301, USA. - */ - -#ifndef INCLUDED_GR_CONSTELLATION_DECODER_CB_H -#define INCLUDED_GR_CONSTELLATION_DECODER_CB_H - -#include <gr_sync_block.h> -#include <vector> - -class gr_constellation_decoder_cb; -typedef boost::shared_ptr<gr_constellation_decoder_cb> gr_constellation_decoder_cb_sptr; - -gr_constellation_decoder_cb_sptr - gr_make_constellation_decoder_cb (const std::vector<gr_complex> &sym_position, - const std::vector<unsigned char> &sym_value_out); - -/*! - * \brief Constellation Decoder - * \ingroup coding_blk - * - */ -class gr_constellation_decoder_cb : public gr_sync_block -{ - - private: - std::vector<gr_complex> d_sym_position; - std::vector<unsigned char> d_sym_value_out; - - friend gr_constellation_decoder_cb_sptr - gr_make_constellation_decoder_cb (const std::vector<gr_complex> &sym_position, const std::vector<unsigned char> &sym_value_out); - - gr_constellation_decoder_cb (const std::vector<gr_complex> &sym_position, - const std::vector<unsigned char> &sym_value_out); //constructor - - public: - bool set_constellation(const std::vector<gr_complex> &sym_position, - const std::vector<unsigned char> &sym_value_out); - - ~gr_constellation_decoder_cb(); //destructor - - int work (int noutput_items, - gr_vector_const_void_star &input_items, - gr_vector_void_star &output_items); -}; - -#endif diff --git a/gnuradio-core/src/lib/general/gr_constellation_decoder_cb.i b/gnuradio-core/src/lib/general/gr_constellation_decoder_cb.i deleted file mode 100644 index 8d9c9b56e..000000000 --- a/gnuradio-core/src/lib/general/gr_constellation_decoder_cb.i +++ /dev/null @@ -1,43 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2006 Free Software Foundation, Inc. - * - * This file is part of GNU Radio - * - * GNU Radio is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 3, or (at your option) - * any later version. - * - * GNU Radio is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with GNU Radio; see the file COPYING. If not, write to - * the Free Software Foundation, Inc., 51 Franklin Street, - * Boston, MA 02110-1301, USA. - */ - -GR_SWIG_BLOCK_MAGIC(gr,constellation_decoder_cb) - -gr_constellation_decoder_cb_sptr - gr_make_constellation_decoder_cb (const std::vector<gr_complex> &sym_position, - const std::vector<unsigned char> &sym_value_out); - -class gr_constellation_decoder_cb : public gr_sync_block -{ - private: - gr_constellation_decoder_cb (const std::vector<gr_complex> &sym_position, - const std::vector<unsigned char> &sym_value_out); - - friend gr_constellation_decoder_cb_sptr - gr_make_constellation_decoder_cb (const std::vector<gr_complex> &sym_position, - const std::vector<unsigned char> &sym_value_out); - - public: - int set_constellation(const std::vector<gr_complex> &sym_position, - const std::vector<unsigned char> &sym_value_out); - ~gr_constellation_decoder_cb(); -}; diff --git a/gnuradio-core/src/python/gnuradio/blks2impl/d8psk.py b/gnuradio-core/src/python/gnuradio/blks2impl/d8psk.py deleted file mode 100644 index 67cf9f569..000000000 --- a/gnuradio-core/src/python/gnuradio/blks2impl/d8psk.py +++ /dev/null @@ -1,363 +0,0 @@ -# -# Copyright 2005,2006,2007 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# - -# See gnuradio-examples/python/digital for examples - -""" -differential 8PSK modulation and demodulation. -""" - -from gnuradio import gr, gru, modulation_utils -from math import pi, sqrt -import psk -import cmath -from pprint import pprint - -# default values (used in __init__ and add_options) -_def_samples_per_symbol = 3 -_def_excess_bw = 0.35 -_def_gray_code = True -_def_verbose = False -_def_log = False - -_def_costas_alpha = 0.175 -_def_gain_mu = 0.175 -_def_mu = 0.5 -_def_omega_relative_limit = 0.005 - - -# ///////////////////////////////////////////////////////////////////////////// -# D8PSK modulator -# ///////////////////////////////////////////////////////////////////////////// - -class d8psk_mod(gr.hier_block2): - - def __init__(self, - samples_per_symbol=_def_samples_per_symbol, - excess_bw=_def_excess_bw, - gray_code=_def_gray_code, - verbose=_def_verbose, - log=_def_log): - """ - Hierarchical block for RRC-filtered QPSK modulation. - - The input is a byte stream (unsigned char) and the - output is the complex modulated signal at baseband. - - @param samples_per_symbol: samples per symbol >= 2 - @type samples_per_symbol: integer - @param excess_bw: Root-raised cosine filter excess bandwidth - @type excess_bw: float - @param gray_code: Tell modulator to Gray code the bits - @type gray_code: bool - @param verbose: Print information about modulator? - @type verbose: bool - @param debug: Print modualtion data to files? - @type debug: bool - """ - - gr.hier_block2.__init__(self, "d8psk_mod", - gr.io_signature(1, 1, gr.sizeof_char), # Input signature - gr.io_signature(1, 1, gr.sizeof_gr_complex)) # Output signature - - self._samples_per_symbol = samples_per_symbol - self._excess_bw = excess_bw - self._gray_code = gray_code - - if not isinstance(samples_per_symbol, int) or samples_per_symbol < 2: - raise TypeError, ("sbp must be an integer >= 2, is %d" % samples_per_symbol) - - ntaps = 11 * samples_per_symbol - - arity = pow(2,self.bits_per_symbol()) - - # turn bytes into k-bit vectors - self.bytes2chunks = \ - gr.packed_to_unpacked_bb(self.bits_per_symbol(), gr.GR_MSB_FIRST) - - if self._gray_code: - self.symbol_mapper = gr.map_bb(psk.binary_to_gray[arity]) - else: - self.symbol_mapper = gr.map_bb(psk.binary_to_ungray[arity]) - - self.diffenc = gr.diff_encoder_bb(arity) - - rot = 1 - rotated_const = map(lambda pt: pt * rot, psk.constellation[arity]) - self.chunks2symbols = gr.chunks_to_symbols_bc(rotated_const) - - # pulse shaping filter - self.rrc_taps = gr.firdes.root_raised_cosine( - self._samples_per_symbol, # gain (sps since we're interpolating by sps) - self._samples_per_symbol, # sampling rate - 1.0, # symbol rate - self._excess_bw, # excess bandwidth (roll-off factor) - ntaps) - - self.rrc_filter = gr.interp_fir_filter_ccf(self._samples_per_symbol, self.rrc_taps) - - if verbose: - self._print_verbage() - - if log: - self._setup_logging() - - # Connect & Initialize base class - self.connect(self, self.bytes2chunks, self.symbol_mapper, self.diffenc, - self.chunks2symbols, self.rrc_filter, self) - - def samples_per_symbol(self): - return self._samples_per_symbol - - def bits_per_symbol(self=None): # staticmethod that's also callable on an instance - return 3 - bits_per_symbol = staticmethod(bits_per_symbol) # make it a static method. RTFM - - def _print_verbage(self): - print "bits per symbol = %d" % self.bits_per_symbol() - print "Gray code = %s" % self._gray_code - print "RS roll-off factor = %f" % self._excess_bw - - def _setup_logging(self): - print "Modulation logging turned on." - self.connect(self.bytes2chunks, - gr.file_sink(gr.sizeof_char, "tx_bytes2chunks.dat")) - self.connect(self.symbol_mapper, - gr.file_sink(gr.sizeof_char, "tx_graycoder.dat")) - self.connect(self.diffenc, - gr.file_sink(gr.sizeof_char, "tx_diffenc.dat")) - self.connect(self.chunks2symbols, - gr.file_sink(gr.sizeof_gr_complex, "tx_chunks2symbols.dat")) - self.connect(self.rrc_filter, - gr.file_sink(gr.sizeof_gr_complex, "tx_rrc_filter.dat")) - - def add_options(parser): - """ - Adds 8PSK modulation-specific options to the standard parser - """ - parser.add_option("", "--excess-bw", type="float", default=_def_excess_bw, - help="set RRC excess bandwith factor [default=%default] (PSK)") - parser.add_option("", "--no-gray-code", dest="gray_code", - action="store_false", default=_def_gray_code, - help="disable gray coding on modulated bits (PSK)") - add_options=staticmethod(add_options) - - - def extract_kwargs_from_options(options): - """ - Given command line options, create dictionary suitable for passing to __init__ - """ - return modulation_utils.extract_kwargs_from_options(d8psk_mod.__init__, - ('self',), options) - extract_kwargs_from_options=staticmethod(extract_kwargs_from_options) - - -# ///////////////////////////////////////////////////////////////////////////// -# D8PSK demodulator -# -# Differentially coherent detection of differentially encoded 8psk -# ///////////////////////////////////////////////////////////////////////////// - -class d8psk_demod(gr.hier_block2): - - def __init__(self, - samples_per_symbol=_def_samples_per_symbol, - excess_bw=_def_excess_bw, - costas_alpha=_def_costas_alpha, - gain_mu=_def_gain_mu, - mu=_def_mu, - omega_relative_limit=_def_omega_relative_limit, - gray_code=_def_gray_code, - verbose=_def_verbose, - log=_def_log): - """ - Hierarchical block for RRC-filtered DQPSK demodulation - - The input is the complex modulated signal at baseband. - The output is a stream of bits packed 1 bit per byte (LSB) - - @param samples_per_symbol: samples per symbol >= 2 - @type samples_per_symbol: float - @param excess_bw: Root-raised cosine filter excess bandwidth - @type excess_bw: float - @param costas_alpha: loop filter gain - @type costas_alphas: float - @param gain_mu: for M&M block - @type gain_mu: float - @param mu: for M&M block - @type mu: float - @param omega_relative_limit: for M&M block - @type omega_relative_limit: float - @param gray_code: Tell modulator to Gray code the bits - @type gray_code: bool - @param verbose: Print information about modulator? - @type verbose: bool - @param debug: Print modualtion data to files? - @type debug: bool - """ - - gr.hier_block2.__init__(self, "d8psk_demod", - gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature - gr.io_signature(1, 1, gr.sizeof_char)) # Output signature - - self._samples_per_symbol = samples_per_symbol - self._excess_bw = excess_bw - self._costas_alpha = costas_alpha - self._mm_gain_mu = gain_mu - self._mm_mu = mu - self._mm_omega_relative_limit = omega_relative_limit - self._gray_code = gray_code - - if samples_per_symbol < 2: - raise TypeError, "sbp must be >= 2, is %d" % samples_per_symbol - - arity = pow(2,self.bits_per_symbol()) - - # Automatic gain control - scale = (1.0/16384.0) - self.pre_scaler = gr.multiply_const_cc(scale) # scale the signal from full-range to +-1 - #self.agc = gr.agc_cc(1e-2, 1, 1, 100) - self.agc = gr.agc2_cc(1e-1, 1e-2, 1, 1, 100) - #self.agc = gr.feedforward_agc_cc(16, 1.0) - - # RRC data filter - ntaps = 11 * samples_per_symbol - self.rrc_taps = gr.firdes.root_raised_cosine( - 1.0, # gain - self._samples_per_symbol, # sampling rate - 1.0, # symbol rate - self._excess_bw, # excess bandwidth (roll-off factor) - ntaps) - self.rrc_filter=gr.interp_fir_filter_ccf(1, self.rrc_taps) - - # symbol clock recovery - self._mm_omega = self._samples_per_symbol - self._mm_gain_omega = .25 * self._mm_gain_mu * self._mm_gain_mu - self._costas_beta = 0.25 * self._costas_alpha * self._costas_alpha - fmin = -0.025 - fmax = 0.025 - - self.receiver=gr.mpsk_receiver_cc(arity, 0, - self._costas_alpha, self._costas_beta, - fmin, fmax, - self._mm_mu, self._mm_gain_mu, - self._mm_omega, self._mm_gain_omega, - self._mm_omega_relative_limit) - - # Perform Differential decoding on the constellation - self.diffdec = gr.diff_phasor_cc() - - # find closest constellation point - rot = 1 - rotated_const = map(lambda pt: pt * rot, psk.constellation[arity]) - self.slicer = gr.constellation_decoder_cb(rotated_const, range(arity)) - - if self._gray_code: - self.symbol_mapper = gr.map_bb(psk.gray_to_binary[arity]) - else: - self.symbol_mapper = gr.map_bb(psk.ungray_to_binary[arity]) - - - # unpack the k bit vector into a stream of bits - self.unpack = gr.unpack_k_bits_bb(self.bits_per_symbol()) - - if verbose: - self._print_verbage() - - if log: - self._setup_logging() - - # Connect - self.connect(self, self.pre_scaler, self.agc, self.rrc_filter, self.receiver, - self.diffdec, self.slicer, self.symbol_mapper, self.unpack, self) - - def samples_per_symbol(self): - return self._samples_per_symbol - - def bits_per_symbol(self=None): # staticmethod that's also callable on an instance - return 3 - bits_per_symbol = staticmethod(bits_per_symbol) # make it a static method. RTFM - - def _print_verbage(self): - print "\nDemodulator:" - print "bits per symbol: %d" % self.bits_per_symbol() - print "Gray code: %s" % self._gray_code - print "RRC roll-off factor: %.2f" % self._excess_bw - print "Costas Loop alpha: %.2e" % self._costas_alpha - print "Costas Loop beta: %.2e" % self._costas_beta - print "M&M mu: %.2f" % self._mm_mu - print "M&M mu gain: %.2e" % self._mm_gain_mu - print "M&M omega: %.2f" % self._mm_omega - print "M&M omega gain: %.2e" % self._mm_gain_omega - print "M&M omega limit: %.2f" % self._mm_omega_relative_limit - - - def _setup_logging(self): - print "Modulation logging turned on." - self.connect(self.pre_scaler, - gr.file_sink(gr.sizeof_gr_complex, "rx_prescaler.dat")) - self.connect(self.agc, - gr.file_sink(gr.sizeof_gr_complex, "rx_agc.dat")) - self.connect(self.rrc_filter, - gr.file_sink(gr.sizeof_gr_complex, "rx_rrc_filter.dat")) - self.connect(self.receiver, - gr.file_sink(gr.sizeof_gr_complex, "rx_receiver.dat")) - self.connect(self.diffdec, - gr.file_sink(gr.sizeof_gr_complex, "rx_diffdec.dat")) - self.connect(self.slicer, - gr.file_sink(gr.sizeof_char, "rx_slicer.dat")) - self.connect(self.symbol_mapper, - gr.file_sink(gr.sizeof_char, "rx_gray_decoder.dat")) - self.connect(self.unpack, - gr.file_sink(gr.sizeof_char, "rx_unpack.dat")) - - def add_options(parser): - """ - Adds modulation-specific options to the standard parser - """ - parser.add_option("", "--excess-bw", type="float", default=_def_excess_bw, - help="set RRC excess bandwith factor [default=%default] (PSK)") - parser.add_option("", "--no-gray-code", dest="gray_code", - action="store_false", default=_def_gray_code, - help="disable gray coding on modulated bits (PSK)") - parser.add_option("", "--costas-alpha", type="float", default=_def_costas_alpha, - help="set Costas loop alpha value [default=%default] (PSK)") - parser.add_option("", "--gain-mu", type="float", default=_def_gain_mu, - help="set M&M symbol sync loop gain mu value [default=%default] (PSK)") - parser.add_option("", "--mu", type="float", default=_def_mu, - help="set M&M symbol sync loop mu value [default=%default] (PSK)") - add_options=staticmethod(add_options) - - def extract_kwargs_from_options(options): - """ - Given command line options, create dictionary suitable for passing to __init__ - """ - return modulation_utils.extract_kwargs_from_options( - d8psk_demod.__init__, ('self',), options) - extract_kwargs_from_options=staticmethod(extract_kwargs_from_options) - - -# -# Add these to the mod/demod registry -# -# NOT READY TO BE USED YET -- ENABLE AT YOUR OWN RISK -modulation_utils.add_type_1_mod('d8psk', d8psk_mod) -modulation_utils.add_type_1_demod('d8psk', d8psk_demod) diff --git a/gnuradio-core/src/python/gnuradio/blks2impl/dbpsk.py b/gnuradio-core/src/python/gnuradio/blks2impl/dbpsk.py deleted file mode 100644 index 55e4890f3..000000000 --- a/gnuradio-core/src/python/gnuradio/blks2impl/dbpsk.py +++ /dev/null @@ -1,363 +0,0 @@ -# -# Copyright 2005,2006,2007,2009 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# - -# See gnuradio-examples/python/digital for examples - -""" -differential BPSK modulation and demodulation. -""" - -from gnuradio import gr, gru, modulation_utils -from math import pi, sqrt -import psk -import cmath -from pprint import pprint - -# default values (used in __init__ and add_options) -_def_samples_per_symbol = 2 -_def_excess_bw = 0.35 -_def_gray_code = True -_def_verbose = False -_def_log = False - -_def_costas_alpha = 0.1 -_def_gain_mu = None -_def_mu = 0.5 -_def_omega_relative_limit = 0.005 - - -# ///////////////////////////////////////////////////////////////////////////// -# DBPSK modulator -# ///////////////////////////////////////////////////////////////////////////// - -class dbpsk_mod(gr.hier_block2): - - def __init__(self, - samples_per_symbol=_def_samples_per_symbol, - excess_bw=_def_excess_bw, - gray_code=_def_gray_code, - verbose=_def_verbose, - log=_def_log): - """ - Hierarchical block for RRC-filtered differential BPSK modulation. - - The input is a byte stream (unsigned char) and the - output is the complex modulated signal at baseband. - - @param samples_per_symbol: samples per baud >= 2 - @type samples_per_symbol: integer - @param excess_bw: Root-raised cosine filter excess bandwidth - @type excess_bw: float - @param gray_code: Tell modulator to Gray code the bits - @type gray_code: bool - @param verbose: Print information about modulator? - @type verbose: bool - @param log: Log modulation data to files? - @type log: bool - """ - - gr.hier_block2.__init__(self, "dbpsk_mod", - gr.io_signature(1, 1, gr.sizeof_char), # Input signature - gr.io_signature(1, 1, gr.sizeof_gr_complex)) # Output signature - - self._samples_per_symbol = samples_per_symbol - self._excess_bw = excess_bw - self._gray_code = gray_code - - if not isinstance(self._samples_per_symbol, int) or self._samples_per_symbol < 2: - raise TypeError, ("sbp must be an integer >= 2, is %d" % self._samples_per_symbol) - - ntaps = 11 * self._samples_per_symbol - - arity = pow(2,self.bits_per_symbol()) - - # turn bytes into k-bit vectors - self.bytes2chunks = \ - gr.packed_to_unpacked_bb(self.bits_per_symbol(), gr.GR_MSB_FIRST) - - if self._gray_code: - self.symbol_mapper = gr.map_bb(psk.binary_to_gray[arity]) - else: - self.symbol_mapper = gr.map_bb(psk.binary_to_ungray[arity]) - - self.diffenc = gr.diff_encoder_bb(arity) - - self.chunks2symbols = gr.chunks_to_symbols_bc(psk.constellation[arity]) - - # pulse shaping filter - self.rrc_taps = gr.firdes.root_raised_cosine( - self._samples_per_symbol, # gain (samples_per_symbol since we're - # interpolating by samples_per_symbol) - self._samples_per_symbol, # sampling rate - 1.0, # symbol rate - self._excess_bw, # excess bandwidth (roll-off factor) - ntaps) - self.rrc_filter = gr.interp_fir_filter_ccf(self._samples_per_symbol, - self.rrc_taps) - - # Connect - self.connect(self, self.bytes2chunks, self.symbol_mapper, self.diffenc, - self.chunks2symbols, self.rrc_filter, self) - - if verbose: - self._print_verbage() - - if log: - self._setup_logging() - - - def samples_per_symbol(self): - return self._samples_per_symbol - - def bits_per_symbol(self=None): # static method that's also callable on an instance - return 1 - bits_per_symbol = staticmethod(bits_per_symbol) # make it a static method. RTFM - - def add_options(parser): - """ - Adds DBPSK modulation-specific options to the standard parser - """ - parser.add_option("", "--excess-bw", type="float", default=_def_excess_bw, - help="set RRC excess bandwith factor [default=%default]") - parser.add_option("", "--no-gray-code", dest="gray_code", - action="store_false", default=True, - help="disable gray coding on modulated bits (PSK)") - add_options=staticmethod(add_options) - - def extract_kwargs_from_options(options): - """ - Given command line options, create dictionary suitable for passing to __init__ - """ - return modulation_utils.extract_kwargs_from_options(dbpsk_mod.__init__, - ('self',), options) - extract_kwargs_from_options=staticmethod(extract_kwargs_from_options) - - - def _print_verbage(self): - print "\nModulator:" - print "bits per symbol: %d" % self.bits_per_symbol() - print "Gray code: %s" % self._gray_code - print "RRC roll-off factor: %.2f" % self._excess_bw - - def _setup_logging(self): - print "Modulation logging turned on." - self.connect(self.bytes2chunks, - gr.file_sink(gr.sizeof_char, "tx_bytes2chunks.dat")) - self.connect(self.symbol_mapper, - gr.file_sink(gr.sizeof_char, "tx_graycoder.dat")) - self.connect(self.diffenc, - gr.file_sink(gr.sizeof_char, "tx_diffenc.dat")) - self.connect(self.chunks2symbols, - gr.file_sink(gr.sizeof_gr_complex, "tx_chunks2symbols.dat")) - self.connect(self.rrc_filter, - gr.file_sink(gr.sizeof_gr_complex, "tx_rrc_filter.dat")) - - -# ///////////////////////////////////////////////////////////////////////////// -# DBPSK demodulator -# -# Differentially coherent detection of differentially encoded BPSK -# ///////////////////////////////////////////////////////////////////////////// - -class dbpsk_demod(gr.hier_block2): - - def __init__(self, - samples_per_symbol=_def_samples_per_symbol, - excess_bw=_def_excess_bw, - costas_alpha=_def_costas_alpha, - gain_mu=_def_gain_mu, - mu=_def_mu, - omega_relative_limit=_def_omega_relative_limit, - gray_code=_def_gray_code, - verbose=_def_verbose, - log=_def_log): - """ - Hierarchical block for RRC-filtered differential BPSK demodulation - - The input is the complex modulated signal at baseband. - The output is a stream of bits packed 1 bit per byte (LSB) - - @param samples_per_symbol: samples per symbol >= 2 - @type samples_per_symbol: float - @param excess_bw: Root-raised cosine filter excess bandwidth - @type excess_bw: float - @param costas_alpha: loop filter gain - @type costas_alphas: float - @param gain_mu: for M&M block - @type gain_mu: float - @param mu: for M&M block - @type mu: float - @param omega_relative_limit: for M&M block - @type omega_relative_limit: float - @param gray_code: Tell modulator to Gray code the bits - @type gray_code: bool - @param verbose: Print information about modulator? - @type verbose: bool - @param debug: Print modualtion data to files? - @type debug: bool - """ - - gr.hier_block2.__init__(self, "dbpsk_demod", - gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature - gr.io_signature(1, 1, gr.sizeof_char)) # Output signature - - self._samples_per_symbol = samples_per_symbol - self._excess_bw = excess_bw - self._costas_alpha = costas_alpha - self._mm_gain_mu = gain_mu - self._mm_mu = mu - self._mm_omega_relative_limit = omega_relative_limit - self._gray_code = gray_code - - if samples_per_symbol < 2: - raise TypeError, "samples_per_symbol must be >= 2, is %r" % (samples_per_symbol,) - - arity = pow(2,self.bits_per_symbol()) - - # Automatic gain control - #scale = (1.0/16384.0) - #self.pre_scaler = gr.multiply_const_cc(scale) # scale the signal from full-range to +-1 - self.agc = gr.agc2_cc(0.6e-1, 1e-3, 1, 1, 100) - #self.agc = gr.feedforward_agc_cc(16, 2.0) - - # RRC data filter - ntaps = 11 * samples_per_symbol - self.rrc_taps = gr.firdes.root_raised_cosine( - 1.0, # gain - self._samples_per_symbol, # sampling rate - 1.0, # symbol rate - self._excess_bw, # excess bandwidth (roll-off factor) - ntaps) - self.rrc_filter=gr.interp_fir_filter_ccf(1, self.rrc_taps) - - # symbol clock recovery - if not self._mm_gain_mu: - self._mm_gain_mu = 0.1 - - self._mm_omega = self._samples_per_symbol - self._mm_gain_omega = .25 * self._mm_gain_mu * self._mm_gain_mu - self._costas_beta = 0.25 * self._costas_alpha * self._costas_alpha - fmin = -0.25 - fmax = 0.25 - - self.receiver=gr.mpsk_receiver_cc(arity, 0, - self._costas_alpha, self._costas_beta, - fmin, fmax, - self._mm_mu, self._mm_gain_mu, - self._mm_omega, self._mm_gain_omega, - self._mm_omega_relative_limit) - - # Do differential decoding based on phase change of symbols - self.diffdec = gr.diff_phasor_cc() - - # find closest constellation point - rot = 1 - rotated_const = map(lambda pt: pt * rot, psk.constellation[arity]) - self.slicer = gr.constellation_decoder_cb(rotated_const, range(arity)) - - if self._gray_code: - self.symbol_mapper = gr.map_bb(psk.gray_to_binary[arity]) - else: - self.symbol_mapper = gr.map_bb(psk.ungray_to_binary[arity]) - - # unpack the k bit vector into a stream of bits - self.unpack = gr.unpack_k_bits_bb(self.bits_per_symbol()) - - if verbose: - self._print_verbage() - - if log: - self._setup_logging() - - # Connect and Initialize base class - self.connect(self, self.agc, self.rrc_filter, self.receiver, - self.diffdec, self.slicer, self.symbol_mapper, self.unpack, self) - - def samples_per_symbol(self): - return self._samples_per_symbol - - def bits_per_symbol(self=None): # staticmethod that's also callable on an instance - return 1 - bits_per_symbol = staticmethod(bits_per_symbol) # make it a static method. RTFM - - def _print_verbage(self): - print "\nDemodulator:" - print "bits per symbol: %d" % self.bits_per_symbol() - print "Gray code: %s" % self._gray_code - print "RRC roll-off factor: %.2f" % self._excess_bw - print "Costas Loop alpha: %.2e" % self._costas_alpha - print "Costas Loop beta: %.2e" % self._costas_beta - print "M&M mu: %.2f" % self._mm_mu - print "M&M mu gain: %.2e" % self._mm_gain_mu - print "M&M omega: %.2f" % self._mm_omega - print "M&M omega gain: %.2e" % self._mm_gain_omega - print "M&M omega limit: %.2f" % self._mm_omega_relative_limit - - def _setup_logging(self): - print "Modulation logging turned on." - self.connect(self.pre_scaler, - gr.file_sink(gr.sizeof_gr_complex, "rx_prescaler.dat")) - self.connect(self.agc, - gr.file_sink(gr.sizeof_gr_complex, "rx_agc.dat")) - self.connect(self.rrc_filter, - gr.file_sink(gr.sizeof_gr_complex, "rx_rrc_filter.dat")) - self.connect(self.receiver, - gr.file_sink(gr.sizeof_gr_complex, "rx_receiver.dat")) - self.connect(self.diffdec, - gr.file_sink(gr.sizeof_gr_complex, "rx_diffdec.dat")) - self.connect(self.slicer, - gr.file_sink(gr.sizeof_char, "rx_slicer.dat")) - self.connect(self.symbol_mapper, - gr.file_sink(gr.sizeof_char, "rx_symbol_mapper.dat")) - self.connect(self.unpack, - gr.file_sink(gr.sizeof_char, "rx_unpack.dat")) - - def add_options(parser): - """ - Adds DBPSK demodulation-specific options to the standard parser - """ - parser.add_option("", "--excess-bw", type="float", default=_def_excess_bw, - help="set RRC excess bandwith factor [default=%default] (PSK)") - parser.add_option("", "--no-gray-code", dest="gray_code", - action="store_false", default=_def_gray_code, - help="disable gray coding on modulated bits (PSK)") - parser.add_option("", "--costas-alpha", type="float", default=None, - help="set Costas loop alpha value [default=%default] (PSK)") - parser.add_option("", "--gain-mu", type="float", default=_def_gain_mu, - help="set M&M symbol sync loop gain mu value [default=%default] (GMSK/PSK)") - parser.add_option("", "--mu", type="float", default=_def_mu, - help="set M&M symbol sync loop mu value [default=%default] (GMSK/PSK)") - parser.add_option("", "--omega-relative-limit", type="float", default=_def_omega_relative_limit, - help="M&M clock recovery omega relative limit [default=%default] (GMSK/PSK)") - add_options=staticmethod(add_options) - - def extract_kwargs_from_options(options): - """ - Given command line options, create dictionary suitable for passing to __init__ - """ - return modulation_utils.extract_kwargs_from_options( - dbpsk_demod.__init__, ('self',), options) - extract_kwargs_from_options=staticmethod(extract_kwargs_from_options) -# -# Add these to the mod/demod registry -# -modulation_utils.add_type_1_mod('dbpsk', dbpsk_mod) -modulation_utils.add_type_1_demod('dbpsk', dbpsk_demod) diff --git a/gnuradio-core/src/python/gnuradio/blks2impl/dbpsk2.py b/gnuradio-core/src/python/gnuradio/blks2impl/dbpsk2.py deleted file mode 100644 index d7bcf5390..000000000 --- a/gnuradio-core/src/python/gnuradio/blks2impl/dbpsk2.py +++ /dev/null @@ -1,369 +0,0 @@ -# -# Copyright 2009,2010 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# - -# See gnuradio-examples/python/digital for examples - -""" -differential BPSK modulation and demodulation. -""" - -from gnuradio import gr, gru, modulation_utils2 -from math import pi, sqrt, ceil -import psk -import cmath -from pprint import pprint - -# default values (used in __init__ and add_options) -_def_samples_per_symbol = 2 -_def_excess_bw = 0.35 -_def_gray_code = True -_def_verbose = False -_def_log = False - -_def_freq_alpha = 0.010 -_def_phase_alpha = 0.1 -_def_timing_alpha = 0.100 -_def_timing_beta = 0.010 -_def_timing_max_dev = 1.5 - - -# ///////////////////////////////////////////////////////////////////////////// -# DBPSK modulator -# ///////////////////////////////////////////////////////////////////////////// - -class dbpsk2_mod(gr.hier_block2): - - def __init__(self, - samples_per_symbol=_def_samples_per_symbol, - excess_bw=_def_excess_bw, - gray_code=_def_gray_code, - verbose=_def_verbose, - log=_def_log): - """ - Hierarchical block for RRC-filtered differential BPSK modulation. - - The input is a byte stream (unsigned char) and the - output is the complex modulated signal at baseband. - - @param samples_per_symbol: samples per baud >= 2 - @type samples_per_symbol: integer - @param excess_bw: Root-raised cosine filter excess bandwidth - @type excess_bw: float - @param gray_code: Tell modulator to Gray code the bits - @type gray_code: bool - @param verbose: Print information about modulator? - @type verbose: bool - @param log: Log modulation data to files? - @type log: bool - """ - - gr.hier_block2.__init__(self, "dbpsk_mod", - gr.io_signature(1, 1, gr.sizeof_char), # Input signature - gr.io_signature(1, 1, gr.sizeof_gr_complex)) # Output signature - - self._samples_per_symbol = samples_per_symbol - self._excess_bw = excess_bw - self._gray_code = gray_code - - if self._samples_per_symbol < 2: - raise TypeError, ("sbp must be an integer >= 2, is %d" % self._samples_per_symbol) - - arity = pow(2,self.bits_per_symbol()) - - # turn bytes into k-bit vectors - self.bytes2chunks = \ - gr.packed_to_unpacked_bb(self.bits_per_symbol(), gr.GR_MSB_FIRST) - - if self._gray_code: - self.symbol_mapper = gr.map_bb(psk.binary_to_gray[arity]) - else: - self.symbol_mapper = gr.map_bb(psk.binary_to_ungray[arity]) - - self.diffenc = gr.diff_encoder_bb(arity) - - self.chunks2symbols = gr.chunks_to_symbols_bc(psk.constellation[arity]) - - # pulse shaping filter - nfilts = 32 - ntaps = nfilts * 11 * int(self._samples_per_symbol) # make nfilts filters of ntaps each - self.rrc_taps = gr.firdes.root_raised_cosine( - nfilts, # gain - nfilts, # sampling rate based on 32 filters in resampler - 1.0, # symbol rate - self._excess_bw, # excess bandwidth (roll-off factor) - ntaps) - self.rrc_filter = gr.pfb_arb_resampler_ccf(self._samples_per_symbol, self.rrc_taps) - - # Connect - self.connect(self, self.bytes2chunks, self.symbol_mapper, self.diffenc, - self.chunks2symbols, self.rrc_filter, self) - - if verbose: - self._print_verbage() - - if log: - self._setup_logging() - - - def samples_per_symbol(self): - return self._samples_per_symbol - - def bits_per_symbol(self=None): # static method that's also callable on an instance - return 1 - bits_per_symbol = staticmethod(bits_per_symbol) # make it a static method. RTFM - - def add_options(parser): - """ - Adds DBPSK modulation-specific options to the standard parser - """ - parser.add_option("", "--excess-bw", type="float", default=_def_excess_bw, - help="set RRC excess bandwith factor [default=%default]") - parser.add_option("", "--no-gray-code", dest="gray_code", - action="store_false", default=True, - help="disable gray coding on modulated bits (PSK)") - add_options=staticmethod(add_options) - - def extract_kwargs_from_options(options): - """ - Given command line options, create dictionary suitable for passing to __init__ - """ - return modulation_utils2.extract_kwargs_from_options(dbpsk2_mod.__init__, - ('self',), options) - extract_kwargs_from_options=staticmethod(extract_kwargs_from_options) - - - def _print_verbage(self): - print "\nModulator:" - print "bits per symbol: %d" % self.bits_per_symbol() - print "Gray code: %s" % self._gray_code - print "RRC roll-off factor: %.2f" % self._excess_bw - - def _setup_logging(self): - print "Modulation logging turned on." - self.connect(self.bytes2chunks, - gr.file_sink(gr.sizeof_char, "tx_bytes2chunks.dat")) - self.connect(self.symbol_mapper, - gr.file_sink(gr.sizeof_char, "tx_graycoder.dat")) - self.connect(self.diffenc, - gr.file_sink(gr.sizeof_char, "tx_diffenc.dat")) - self.connect(self.chunks2symbols, - gr.file_sink(gr.sizeof_gr_complex, "tx_chunks2symbols.dat")) - self.connect(self.rrc_filter, - gr.file_sink(gr.sizeof_gr_complex, "tx_rrc_filter.dat")) - - -# ///////////////////////////////////////////////////////////////////////////// -# DBPSK demodulator -# -# Differentially coherent detection of differentially encoded BPSK -# ///////////////////////////////////////////////////////////////////////////// - -class dbpsk2_demod(gr.hier_block2): - - def __init__(self, - samples_per_symbol=_def_samples_per_symbol, - excess_bw=_def_excess_bw, - freq_alpha=_def_freq_alpha, - phase_alpha=_def_phase_alpha, - timing_alpha=_def_timing_alpha, - timing_max_dev=_def_timing_max_dev, - gray_code=_def_gray_code, - verbose=_def_verbose, - log=_def_log, - sync_out=False): - """ - Hierarchical block for RRC-filtered differential BPSK demodulation - - The input is the complex modulated signal at baseband. - The output is a stream of bits packed 1 bit per byte (LSB) - - @param samples_per_symbol: samples per symbol >= 2 - @type samples_per_symbol: float - @param excess_bw: Root-raised cosine filter excess bandwidth - @type excess_bw: float - @param freq_alpha: loop filter gain for frequency recovery - @type freq_alpha: float - @param phase_alpha: loop filter gain for phase/fine frequency recovery - @type phase_alpha: float - @param timing_alpha: loop alpha gain for timing recovery - @type timing_alpha: float - @param timing_max: timing loop maximum rate deviations - @type timing_max: float - @param gray_code: Tell modulator to Gray code the bits - @type gray_code: bool - @param verbose: Print information about modulator? - @type verbose: bool - @param log: Print modualtion data to files? - @type log: bool - @param sync_out: Output a sync signal on :1? - @type sync_out: bool - """ - if sync_out: io_sig_out = gr.io_signaturev(2, 2, (gr.sizeof_char, gr.sizeof_gr_complex)) - else: io_sig_out = gr.io_signature(1, 1, gr.sizeof_char) - - gr.hier_block2.__init__(self, "dqpsk2_demod", - gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature - io_sig_out) # Output signature - - self._samples_per_symbol = samples_per_symbol - self._excess_bw = excess_bw - self._freq_alpha = freq_alpha - self._freq_beta = 0.10*self._freq_alpha - self._phase_alpha = phase_alpha - self._timing_alpha = timing_alpha - self._timing_beta = _def_timing_beta - self._timing_max_dev=timing_max_dev - self._gray_code = gray_code - - if samples_per_symbol < 2: - raise TypeError, "samples_per_symbol must be >= 2, is %r" % (samples_per_symbol,) - - arity = pow(2,self.bits_per_symbol()) - - # Automatic gain control - self.agc = gr.agc2_cc(0.6e-1, 1e-3, 1, 1, 100) - #self.agc = gr.feedforward_agc_cc(16, 1.0) - - # Frequency correction - self.freq_recov = gr.fll_band_edge_cc(self._samples_per_symbol, self._excess_bw, - 11*int(self._samples_per_symbol), - self._freq_alpha, self._freq_beta) - - # symbol timing recovery with RRC data filter - nfilts = 32 - ntaps = 11 * int(self._samples_per_symbol*nfilts) - taps = gr.firdes.root_raised_cosine(nfilts, nfilts, - 1.0/float(self._samples_per_symbol), - self._excess_bw, ntaps) - self.time_recov = gr.pfb_clock_sync_ccf(self._samples_per_symbol, - self._timing_alpha, - taps, nfilts, nfilts/2, self._timing_max_dev) - self.time_recov.set_beta(self._timing_beta) - - # Perform phase / fine frequency correction - self._phase_beta = 0.25 * self._phase_alpha * self._phase_alpha - # Allow a frequency swing of +/- half of the sample rate - fmin = -0.5 - fmax = 0.5 - - self.phase_recov = gr.costas_loop_cc(self._phase_alpha, - self._phase_beta, - fmax, fmin, arity) - - # Do differential decoding based on phase change of symbols - self.diffdec = gr.diff_phasor_cc() - - # find closest constellation point - rot = 1 - rotated_const = map(lambda pt: pt * rot, psk.constellation[arity]) - self.slicer = gr.constellation_decoder_cb(rotated_const, range(arity)) - - if self._gray_code: - self.symbol_mapper = gr.map_bb(psk.gray_to_binary[arity]) - else: - self.symbol_mapper = gr.map_bb(psk.ungray_to_binary[arity]) - - # unpack the k bit vector into a stream of bits - self.unpack = gr.unpack_k_bits_bb(self.bits_per_symbol()) - - if verbose: - self._print_verbage() - - if log: - self._setup_logging() - - # Connect - self.connect(self, self.agc, - self.freq_recov, self.time_recov, self.phase_recov, - self.diffdec, self.slicer, self.symbol_mapper, self.unpack, self) - if sync_out: self.connect(self.time_recov, (self, 1)) - - def samples_per_symbol(self): - return self._samples_per_symbol - - def bits_per_symbol(self=None): # staticmethod that's also callable on an instance - return 1 - bits_per_symbol = staticmethod(bits_per_symbol) # make it a static method. RTFM - - def _print_verbage(self): - print "\nDemodulator:" - print "bits per symbol: %d" % self.bits_per_symbol() - print "Gray code: %s" % self._gray_code - print "RRC roll-off factor: %.2f" % self._excess_bw - print "FLL gain: %.2e" % self._freq_alpha - print "Timing alpha gain: %.2e" % self._timing_alpha - print "Timing beta gain: %.2e" % self._timing_beta - print "Timing max dev: %.2f" % self._timing_max_dev - print "Phase track alpha: %.2e" % self._phase_alpha - print "Phase track beta: %.2e" % self._phase_beta - - def _setup_logging(self): - print "Modulation logging turned on." - self.connect(self.agc, - gr.file_sink(gr.sizeof_gr_complex, "rx_agc.dat")) - self.connect(self.freq_recov, - gr.file_sink(gr.sizeof_gr_complex, "rx_freq_recov.dat")) - self.connect(self.time_recov, - gr.file_sink(gr.sizeof_gr_complex, "rx_time_recov.dat")) - self.connect(self.phase_recov, - gr.file_sink(gr.sizeof_gr_complex, "rx_phase_recov.dat")) - self.connect(self.diffdec, - gr.file_sink(gr.sizeof_gr_complex, "rx_diffdec.dat")) - self.connect(self.slicer, - gr.file_sink(gr.sizeof_char, "rx_slicer.dat")) - self.connect(self.symbol_mapper, - gr.file_sink(gr.sizeof_char, "rx_symbol_mapper.dat")) - self.connect(self.unpack, - gr.file_sink(gr.sizeof_char, "rx_unpack.dat")) - - def add_options(parser): - """ - Adds DBPSK demodulation-specific options to the standard parser - """ - parser.add_option("", "--excess-bw", type="float", default=_def_excess_bw, - help="set RRC excess bandwith factor [default=%default] (PSK)") - parser.add_option("", "--no-gray-code", dest="gray_code", - action="store_false", default=_def_gray_code, - help="disable gray coding on modulated bits (PSK)") - parser.add_option("", "--freq-alpha", type="float", default=_def_freq_alpha, - help="set frequency lock loop alpha gain value [default=%default] (PSK)") - parser.add_option("", "--phase-alpha", type="float", default=_def_phase_alpha, - help="set phase tracking loop alpha value [default=%default] (PSK)") - parser.add_option("", "--timing-alpha", type="float", default=_def_timing_alpha, - help="set timing symbol sync loop gain alpha value [default=%default] (GMSK/PSK)") - parser.add_option("", "--timing-beta", type="float", default=_def_timing_beta, - help="set timing symbol sync loop gain beta value [default=%default] (GMSK/PSK)") - parser.add_option("", "--timing-max-dev", type="float", default=_def_timing_max_dev, - help="set timing symbol sync loop maximum deviation [default=%default] (GMSK/PSK)") - add_options=staticmethod(add_options) - - def extract_kwargs_from_options(options): - """ - Given command line options, create dictionary suitable for passing to __init__ - """ - return modulation_utils2.extract_kwargs_from_options( - dbpsk2_demod.__init__, ('self',), options) - extract_kwargs_from_options=staticmethod(extract_kwargs_from_options) -# -# Add these to the mod/demod registry -# -modulation_utils2.add_type_1_mod('dbpsk2', dbpsk2_mod) -modulation_utils2.add_type_1_demod('dbpsk2', dbpsk2_demod) diff --git a/gnuradio-core/src/python/gnuradio/blks2impl/dqpsk.py b/gnuradio-core/src/python/gnuradio/blks2impl/dqpsk.py deleted file mode 100644 index 42d534168..000000000 --- a/gnuradio-core/src/python/gnuradio/blks2impl/dqpsk.py +++ /dev/null @@ -1,363 +0,0 @@ -# -# Copyright 2005,2006,2007,2009 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# - -# See gnuradio-examples/python/digital for examples - -""" -differential QPSK modulation and demodulation. -""" - -from gnuradio import gr, gru, modulation_utils -from math import pi, sqrt -import psk -import cmath -from pprint import pprint - -# default values (used in __init__ and add_options) -_def_samples_per_symbol = 2 -_def_excess_bw = 0.35 -_def_gray_code = True -_def_verbose = False -_def_log = False - -_def_costas_alpha = 0.15 -_def_gain_mu = None -_def_mu = 0.5 -_def_omega_relative_limit = 0.005 - - -# ///////////////////////////////////////////////////////////////////////////// -# DQPSK modulator -# ///////////////////////////////////////////////////////////////////////////// - -class dqpsk_mod(gr.hier_block2): - - def __init__(self, - samples_per_symbol=_def_samples_per_symbol, - excess_bw=_def_excess_bw, - gray_code=_def_gray_code, - verbose=_def_verbose, - log=_def_log): - """ - Hierarchical block for RRC-filtered QPSK modulation. - - The input is a byte stream (unsigned char) and the - output is the complex modulated signal at baseband. - - @param samples_per_symbol: samples per symbol >= 2 - @type samples_per_symbol: integer - @param excess_bw: Root-raised cosine filter excess bandwidth - @type excess_bw: float - @param gray_code: Tell modulator to Gray code the bits - @type gray_code: bool - @param verbose: Print information about modulator? - @type verbose: bool - @param debug: Print modualtion data to files? - @type debug: bool - """ - - gr.hier_block2.__init__(self, "dqpsk_mod", - gr.io_signature(1, 1, gr.sizeof_char), # Input signature - gr.io_signature(1, 1, gr.sizeof_gr_complex)) # Output signature - - self._samples_per_symbol = samples_per_symbol - self._excess_bw = excess_bw - self._gray_code = gray_code - - if not isinstance(samples_per_symbol, int) or samples_per_symbol < 2: - raise TypeError, ("sbp must be an integer >= 2, is %d" % samples_per_symbol) - - ntaps = 11 * samples_per_symbol - - arity = pow(2,self.bits_per_symbol()) - - # turn bytes into k-bit vectors - self.bytes2chunks = \ - gr.packed_to_unpacked_bb(self.bits_per_symbol(), gr.GR_MSB_FIRST) - - if self._gray_code: - self.symbol_mapper = gr.map_bb(psk.binary_to_gray[arity]) - else: - self.symbol_mapper = gr.map_bb(psk.binary_to_ungray[arity]) - - self.diffenc = gr.diff_encoder_bb(arity) - - rot = .707 + .707j - rotated_const = map(lambda pt: pt * rot, psk.constellation[arity]) - self.chunks2symbols = gr.chunks_to_symbols_bc(rotated_const) - - # pulse shaping filter - self.rrc_taps = gr.firdes.root_raised_cosine( - self._samples_per_symbol, # gain (sps since we're interpolating by sps) - self._samples_per_symbol, # sampling rate - 1.0, # symbol rate - self._excess_bw, # excess bandwidth (roll-off factor) - ntaps) - - self.rrc_filter = gr.interp_fir_filter_ccf(self._samples_per_symbol, self.rrc_taps) - - if verbose: - self._print_verbage() - - if log: - self._setup_logging() - - # Connect & Initialize base class - self.connect(self, self.bytes2chunks, self.symbol_mapper, self.diffenc, - self.chunks2symbols, self.rrc_filter, self) - - def samples_per_symbol(self): - return self._samples_per_symbol - - def bits_per_symbol(self=None): # staticmethod that's also callable on an instance - return 2 - bits_per_symbol = staticmethod(bits_per_symbol) # make it a static method. RTFM - - def _print_verbage(self): - print "\nModulator:" - print "bits per symbol: %d" % self.bits_per_symbol() - print "Gray code: %s" % self._gray_code - print "RRS roll-off factor: %f" % self._excess_bw - - def _setup_logging(self): - print "Modulation logging turned on." - self.connect(self.bytes2chunks, - gr.file_sink(gr.sizeof_char, "tx_bytes2chunks.dat")) - self.connect(self.symbol_mapper, - gr.file_sink(gr.sizeof_char, "tx_graycoder.dat")) - self.connect(self.diffenc, - gr.file_sink(gr.sizeof_char, "tx_diffenc.dat")) - self.connect(self.chunks2symbols, - gr.file_sink(gr.sizeof_gr_complex, "tx_chunks2symbols.dat")) - self.connect(self.rrc_filter, - gr.file_sink(gr.sizeof_gr_complex, "tx_rrc_filter.dat")) - - def add_options(parser): - """ - Adds QPSK modulation-specific options to the standard parser - """ - parser.add_option("", "--excess-bw", type="float", default=_def_excess_bw, - help="set RRC excess bandwith factor [default=%default] (PSK)") - parser.add_option("", "--no-gray-code", dest="gray_code", - action="store_false", default=_def_gray_code, - help="disable gray coding on modulated bits (PSK)") - add_options=staticmethod(add_options) - - - def extract_kwargs_from_options(options): - """ - Given command line options, create dictionary suitable for passing to __init__ - """ - return modulation_utils.extract_kwargs_from_options(dqpsk_mod.__init__, - ('self',), options) - extract_kwargs_from_options=staticmethod(extract_kwargs_from_options) - - -# ///////////////////////////////////////////////////////////////////////////// -# DQPSK demodulator -# -# Differentially coherent detection of differentially encoded qpsk -# ///////////////////////////////////////////////////////////////////////////// - -class dqpsk_demod(gr.hier_block2): - - def __init__(self, - samples_per_symbol=_def_samples_per_symbol, - excess_bw=_def_excess_bw, - costas_alpha=_def_costas_alpha, - gain_mu=_def_gain_mu, - mu=_def_mu, - omega_relative_limit=_def_omega_relative_limit, - gray_code=_def_gray_code, - verbose=_def_verbose, - log=_def_log): - """ - Hierarchical block for RRC-filtered DQPSK demodulation - - The input is the complex modulated signal at baseband. - The output is a stream of bits packed 1 bit per byte (LSB) - - @param samples_per_symbol: samples per symbol >= 2 - @type samples_per_symbol: float - @param excess_bw: Root-raised cosine filter excess bandwidth - @type excess_bw: float - @param costas_alpha: loop filter gain - @type costas_alphas: float - @param gain_mu: for M&M block - @type gain_mu: float - @param mu: for M&M block - @type mu: float - @param omega_relative_limit: for M&M block - @type omega_relative_limit: float - @param gray_code: Tell modulator to Gray code the bits - @type gray_code: bool - @param verbose: Print information about modulator? - @type verbose: bool - @param debug: Print modualtion data to files? - @type debug: bool - """ - - gr.hier_block2.__init__(self, "dqpsk_demod", - gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature - gr.io_signature(1, 1, gr.sizeof_char)) # Output signature - - self._samples_per_symbol = samples_per_symbol - self._excess_bw = excess_bw - self._costas_alpha = costas_alpha - self._mm_gain_mu = gain_mu - self._mm_mu = mu - self._mm_omega_relative_limit = omega_relative_limit - self._gray_code = gray_code - - if samples_per_symbol < 2: - raise TypeError, "sbp must be >= 2, is %d" % samples_per_symbol - - arity = pow(2,self.bits_per_symbol()) - - # Automatic gain control - scale = (1.0/16384.0) - self.pre_scaler = gr.multiply_const_cc(scale) # scale the signal from full-range to +-1 - #self.agc = gr.agc2_cc(0.6e-1, 1e-3, 1, 1, 100) - self.agc = gr.feedforward_agc_cc(16, 2.0) - - # RRC data filter - ntaps = 11 * samples_per_symbol - self.rrc_taps = gr.firdes.root_raised_cosine( - 1.0, # gain - self._samples_per_symbol, # sampling rate - 1.0, # symbol rate - self._excess_bw, # excess bandwidth (roll-off factor) - ntaps) - self.rrc_filter=gr.interp_fir_filter_ccf(1, self.rrc_taps) - - if not self._mm_gain_mu: - sbs_to_mm = {2: 0.050, 3: 0.075, 4: 0.11, 5: 0.125, 6: 0.15, 7: 0.15} - self._mm_gain_mu = sbs_to_mm[samples_per_symbol] - - self._mm_omega = self._samples_per_symbol - self._mm_gain_omega = .25 * self._mm_gain_mu * self._mm_gain_mu - self._costas_beta = 0.25 * self._costas_alpha * self._costas_alpha - fmin = -0.25 - fmax = 0.25 - - self.receiver=gr.mpsk_receiver_cc(arity, pi/4.0, - self._costas_alpha, self._costas_beta, - fmin, fmax, - self._mm_mu, self._mm_gain_mu, - self._mm_omega, self._mm_gain_omega, - self._mm_omega_relative_limit) - - # Perform Differential decoding on the constellation - self.diffdec = gr.diff_phasor_cc() - - # find closest constellation point - rot = 1 - rotated_const = map(lambda pt: pt * rot, psk.constellation[arity]) - self.slicer = gr.constellation_decoder_cb(rotated_const, range(arity)) - - if self._gray_code: - self.symbol_mapper = gr.map_bb(psk.gray_to_binary[arity]) - else: - self.symbol_mapper = gr.map_bb(psk.ungray_to_binary[arity]) - - # unpack the k bit vector into a stream of bits - self.unpack = gr.unpack_k_bits_bb(self.bits_per_symbol()) - - if verbose: - self._print_verbage() - - if log: - self._setup_logging() - - # Connect & Initialize base class - self.connect(self, self.pre_scaler, self.agc, self.rrc_filter, self.receiver, - self.diffdec, self.slicer, self.symbol_mapper, self.unpack, self) - - def samples_per_symbol(self): - return self._samples_per_symbol - - def bits_per_symbol(self=None): # staticmethod that's also callable on an instance - return 2 - bits_per_symbol = staticmethod(bits_per_symbol) # make it a static method. RTFM - - def _print_verbage(self): - print "\nDemodulator:" - print "bits per symbol: %d" % self.bits_per_symbol() - print "Gray code: %s" % self._gray_code - print "RRC roll-off factor: %.2f" % self._excess_bw - print "Costas Loop alpha: %.2e" % self._costas_alpha - print "Costas Loop beta: %.2e" % self._costas_beta - print "M&M mu: %.2f" % self._mm_mu - print "M&M mu gain: %.2e" % self._mm_gain_mu - print "M&M omega: %.2f" % self._mm_omega - print "M&M omega gain: %.2e" % self._mm_gain_omega - print "M&M omega limit: %.2f" % self._mm_omega_relative_limit - - def _setup_logging(self): - print "Modulation logging turned on." - self.connect(self.pre_scaler, - gr.file_sink(gr.sizeof_gr_complex, "rx_prescaler.dat")) - self.connect(self.agc, - gr.file_sink(gr.sizeof_gr_complex, "rx_agc.dat")) - self.connect(self.rrc_filter, - gr.file_sink(gr.sizeof_gr_complex, "rx_rrc_filter.dat")) - self.connect(self.receiver, - gr.file_sink(gr.sizeof_gr_complex, "rx_receiver.dat")) - self.connect(self.diffdec, - gr.file_sink(gr.sizeof_gr_complex, "rx_diffdec.dat")) - self.connect(self.slicer, - gr.file_sink(gr.sizeof_char, "rx_slicer.dat")) - self.connect(self.symbol_mapper, - gr.file_sink(gr.sizeof_char, "rx_gray_decoder.dat")) - self.connect(self.unpack, - gr.file_sink(gr.sizeof_char, "rx_unpack.dat")) - - def add_options(parser): - """ - Adds modulation-specific options to the standard parser - """ - parser.add_option("", "--excess-bw", type="float", default=_def_excess_bw, - help="set RRC excess bandwith factor [default=%default] (PSK)") - parser.add_option("", "--no-gray-code", dest="gray_code", - action="store_false", default=_def_gray_code, - help="disable gray coding on modulated bits (PSK)") - parser.add_option("", "--costas-alpha", type="float", default=_def_costas_alpha, - help="set Costas loop alpha value [default=%default] (PSK)") - parser.add_option("", "--gain-mu", type="float", default=_def_gain_mu, - help="set M&M symbol sync loop gain mu value [default=%default] (PSK)") - parser.add_option("", "--mu", type="float", default=_def_mu, - help="set M&M symbol sync loop mu value [default=%default] (PSK)") - add_options=staticmethod(add_options) - - def extract_kwargs_from_options(options): - """ - Given command line options, create dictionary suitable for passing to __init__ - """ - return modulation_utils.extract_kwargs_from_options( - dqpsk_demod.__init__, ('self',), options) - extract_kwargs_from_options=staticmethod(extract_kwargs_from_options) - - -# -# Add these to the mod/demod registry -# -modulation_utils.add_type_1_mod('dqpsk', dqpsk_mod) -modulation_utils.add_type_1_demod('dqpsk', dqpsk_demod) diff --git a/gnuradio-core/src/python/gnuradio/blks2impl/dqpsk2.py b/gnuradio-core/src/python/gnuradio/blks2impl/dqpsk2.py deleted file mode 100644 index e1e627707..000000000 --- a/gnuradio-core/src/python/gnuradio/blks2impl/dqpsk2.py +++ /dev/null @@ -1,377 +0,0 @@ -# -# Copyright 2009,2010 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# - -# See gnuradio-examples/python/digital for examples - -""" -differential QPSK modulation and demodulation. -""" - -from gnuradio import gr, gru, modulation_utils2 -from math import pi, sqrt -import psk -import cmath -from pprint import pprint - -# default values (used in __init__ and add_options) -_def_samples_per_symbol = 2 -_def_excess_bw = 0.35 -_def_gray_code = True -_def_verbose = False -_def_log = False - -_def_freq_alpha = 0.010 -_def_phase_alpha = 0.01 -_def_timing_alpha = 0.100 -_def_timing_beta = 0.010 -_def_timing_max_dev = 1.5 - - -# ///////////////////////////////////////////////////////////////////////////// -# DQPSK modulator -# ///////////////////////////////////////////////////////////////////////////// - -class dqpsk2_mod(gr.hier_block2): - - def __init__(self, - samples_per_symbol=_def_samples_per_symbol, - excess_bw=_def_excess_bw, - gray_code=_def_gray_code, - verbose=_def_verbose, - log=_def_log): - """ - Hierarchical block for RRC-filtered QPSK modulation. - - The input is a byte stream (unsigned char) and the - output is the complex modulated signal at baseband. - - @param samples_per_symbol: samples per symbol >= 2 - @type samples_per_symbol: integer - @param excess_bw: Root-raised cosine filter excess bandwidth - @type excess_bw: float - @param gray_code: Tell modulator to Gray code the bits - @type gray_code: bool - @param verbose: Print information about modulator? - @type verbose: bool - @param debug: Print modualtion data to files? - @type debug: bool - """ - - gr.hier_block2.__init__(self, "dqpsk2_mod", - gr.io_signature(1, 1, gr.sizeof_char), # Input signature - gr.io_signature(1, 1, gr.sizeof_gr_complex)) # Output signature - - self._samples_per_symbol = samples_per_symbol - self._excess_bw = excess_bw - self._gray_code = gray_code - - if samples_per_symbol < 2: - raise TypeError, ("sbp must be >= 2, is %f" % samples_per_symbol) - - ntaps = 11 * samples_per_symbol - - arity = pow(2,self.bits_per_symbol()) - - # turn bytes into k-bit vectors - self.bytes2chunks = \ - gr.packed_to_unpacked_bb(self.bits_per_symbol(), gr.GR_MSB_FIRST) - - if self._gray_code: - self.symbol_mapper = gr.map_bb(psk.binary_to_gray[arity]) - else: - self.symbol_mapper = gr.map_bb(psk.binary_to_ungray[arity]) - - self.diffenc = gr.diff_encoder_bb(arity) - - rot = .707 + .707j - rotated_const = map(lambda pt: pt * rot, psk.constellation[arity]) - self.chunks2symbols = gr.chunks_to_symbols_bc(rotated_const) - - # pulse shaping filter - nfilts = 32 - ntaps = 11 * int(nfilts * self._samples_per_symbol) # make nfilts filters of ntaps each - self.rrc_taps = gr.firdes.root_raised_cosine( - nfilts, # gain - nfilts, # sampling rate based on 32 filters in resampler - 1.0, # symbol rate - self._excess_bw, # excess bandwidth (roll-off factor) - ntaps) - self.rrc_filter = gr.pfb_arb_resampler_ccf(self._samples_per_symbol, self.rrc_taps) - - if verbose: - self._print_verbage() - - if log: - self._setup_logging() - - # Connect & Initialize base class - self.connect(self, self.bytes2chunks, self.symbol_mapper, self.diffenc, - self.chunks2symbols, self.rrc_filter, self) - - def samples_per_symbol(self): - return self._samples_per_symbol - - def bits_per_symbol(self=None): # staticmethod that's also callable on an instance - return 2 - bits_per_symbol = staticmethod(bits_per_symbol) # make it a static method. RTFM - - def _print_verbage(self): - print "\nModulator:" - print "bits per symbol: %d" % self.bits_per_symbol() - print "Gray code: %s" % self._gray_code - print "RRS roll-off factor: %f" % self._excess_bw - - def _setup_logging(self): - print "Modulation logging turned on." - self.connect(self.bytes2chunks, - gr.file_sink(gr.sizeof_char, "tx_bytes2chunks.dat")) - self.connect(self.symbol_mapper, - gr.file_sink(gr.sizeof_char, "tx_graycoder.dat")) - self.connect(self.diffenc, - gr.file_sink(gr.sizeof_char, "tx_diffenc.dat")) - self.connect(self.chunks2symbols, - gr.file_sink(gr.sizeof_gr_complex, "tx_chunks2symbols.dat")) - self.connect(self.rrc_filter, - gr.file_sink(gr.sizeof_gr_complex, "tx_rrc_filter.dat")) - - def add_options(parser): - """ - Adds QPSK modulation-specific options to the standard parser - """ - parser.add_option("", "--excess-bw", type="float", default=_def_excess_bw, - help="set RRC excess bandwith factor [default=%default] (PSK)") - parser.add_option("", "--no-gray-code", dest="gray_code", - action="store_false", default=_def_gray_code, - help="disable gray coding on modulated bits (PSK)") - add_options=staticmethod(add_options) - - - def extract_kwargs_from_options(options): - """ - Given command line options, create dictionary suitable for passing to __init__ - """ - return modulation_utils2.extract_kwargs_from_options(dqpsk2_mod.__init__, - ('self',), options) - extract_kwargs_from_options=staticmethod(extract_kwargs_from_options) - - -# ///////////////////////////////////////////////////////////////////////////// -# DQPSK demodulator -# -# Differentially coherent detection of differentially encoded qpsk -# ///////////////////////////////////////////////////////////////////////////// - -class dqpsk2_demod(gr.hier_block2): - - def __init__(self, - samples_per_symbol=_def_samples_per_symbol, - excess_bw=_def_excess_bw, - freq_alpha=_def_freq_alpha, - phase_alpha=_def_phase_alpha, - timing_alpha=_def_timing_alpha, - timing_max_dev=_def_timing_max_dev, - gray_code=_def_gray_code, - verbose=_def_verbose, - log=_def_log, - sync_out=False): - """ - Hierarchical block for RRC-filtered DQPSK demodulation - - The input is the complex modulated signal at baseband. - The output is a stream of bits packed 1 bit per byte (LSB) - - @param samples_per_symbol: samples per symbol >= 2 - @type samples_per_symbol: float - @param excess_bw: Root-raised cosine filter excess bandwidth - @type excess_bw: float - @param freq_alpha: loop filter gain for frequency recovery - @type freq_alpha: float - @param phase_alpha: loop filter gain - @type phase_alphas: float - @param timing_alpha: timing loop alpha gain - @type timing_alpha: float - @param timing_max: timing loop maximum rate deviations - @type timing_max: float - @param gray_code: Tell modulator to Gray code the bits - @type gray_code: bool - @param verbose: Print information about modulator? - @type verbose: bool - @param log: Print modualtion data to files? - @type log: bool - @param sync_out: Output a sync signal on :1? - @type sync_out: bool - """ - if sync_out: io_sig_out = gr.io_signaturev(2, 2, (gr.sizeof_char, gr.sizeof_gr_complex)) - else: io_sig_out = gr.io_signature(1, 1, gr.sizeof_char) - - gr.hier_block2.__init__(self, "dqpsk2_demod", - gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature - io_sig_out) # Output signature - - self._samples_per_symbol = samples_per_symbol - self._excess_bw = excess_bw - self._freq_alpha = freq_alpha - self._freq_beta = 0.25*self._freq_alpha**2 - self._phase_alpha = phase_alpha - self._timing_alpha = timing_alpha - self._timing_beta = _def_timing_beta - self._timing_max_dev=timing_max_dev - self._gray_code = gray_code - - if samples_per_symbol < 2: - raise TypeError, "sbp must be >= 2, is %d" % samples_per_symbol - - arity = pow(2,self.bits_per_symbol()) - - # Automatic gain control - self.agc = gr.agc2_cc(0.6e-1, 1e-3, 1, 1, 100) - #self.agc = gr.feedforward_agc_cc(16, 2.0) - - # Frequency correction - self.freq_recov = gr.fll_band_edge_cc(self._samples_per_symbol, self._excess_bw, - 11*int(self._samples_per_symbol), - self._freq_alpha, self._freq_beta) - - - # symbol timing recovery with RRC data filter - nfilts = 32 - ntaps = 11 * int(samples_per_symbol*nfilts) - taps = gr.firdes.root_raised_cosine(nfilts, nfilts, - 1.0/float(self._samples_per_symbol), - self._excess_bw, ntaps) - self.time_recov = gr.pfb_clock_sync_ccf(self._samples_per_symbol, - self._timing_alpha, - taps, nfilts, nfilts/2, self._timing_max_dev) - self.time_recov.set_beta(self._timing_beta) - - - # Perform phase / fine frequency correction - self._phase_beta = 0.25 * self._phase_alpha * self._phase_alpha - # Allow a frequency swing of +/- half of the sample rate - fmin = -0.5 - fmax = 0.5 - - self.phase_recov = gr.costas_loop_cc(self._phase_alpha, - self._phase_beta, - fmax, fmin, arity) - - - # Perform Differential decoding on the constellation - self.diffdec = gr.diff_phasor_cc() - - # find closest constellation point - rot = 1 - rotated_const = map(lambda pt: pt * rot, psk.constellation[arity]) - self.slicer = gr.constellation_decoder_cb(rotated_const, range(arity)) - - if self._gray_code: - self.symbol_mapper = gr.map_bb(psk.gray_to_binary[arity]) - else: - self.symbol_mapper = gr.map_bb(psk.ungray_to_binary[arity]) - - # unpack the k bit vector into a stream of bits - self.unpack = gr.unpack_k_bits_bb(self.bits_per_symbol()) - - if verbose: - self._print_verbage() - - if log: - self._setup_logging() - - # Connect - self.connect(self, self.agc, - self.freq_recov, self.time_recov, self.phase_recov, - self.diffdec, self.slicer, self.symbol_mapper, self.unpack, self) - if sync_out: self.connect(self.time_recov, (self, 1)) - - def samples_per_symbol(self): - return self._samples_per_symbol - - def bits_per_symbol(self=None): # staticmethod that's also callable on an instance - return 2 - bits_per_symbol = staticmethod(bits_per_symbol) # make it a static method. RTFM - - def _print_verbage(self): - print "\nDemodulator:" - print "bits per symbol: %d" % self.bits_per_symbol() - print "Gray code: %s" % self._gray_code - print "RRC roll-off factor: %.2f" % self._excess_bw - print "FLL gain: %.2f" % self._freq_alpha - print "Timing alpha gain: %.2f" % self._timing_alpha - print "Timing beta gain: %.2f" % self._timing_beta - print "Timing max dev: %.2f" % self._timing_max_dev - print "Phase track alpha: %.2e" % self._phase_alpha - print "Phase track beta: %.2e" % self._phase_beta - - def _setup_logging(self): - print "Modulation logging turned on." - self.connect(self.agc, - gr.file_sink(gr.sizeof_gr_complex, "rx_agc.dat")) - self.connect(self.freq_recov, - gr.file_sink(gr.sizeof_gr_complex, "rx_freq_recov.dat")) - self.connect(self.time_recov, - gr.file_sink(gr.sizeof_gr_complex, "rx_time_recov.dat")) - self.connect(self.phase_recov, - gr.file_sink(gr.sizeof_gr_complex, "rx_phase_recov.dat")) - self.connect(self.diffdec, - gr.file_sink(gr.sizeof_gr_complex, "rx_diffdec.dat")) - self.connect(self.slicer, - gr.file_sink(gr.sizeof_char, "rx_slicer.dat")) - self.connect(self.symbol_mapper, - gr.file_sink(gr.sizeof_char, "rx_gray_decoder.dat")) - self.connect(self.unpack, - gr.file_sink(gr.sizeof_char, "rx_unpack.dat")) - - def add_options(parser): - """ - Adds DQPSK demodulation-specific options to the standard parser - """ - parser.add_option("", "--excess-bw", type="float", default=_def_excess_bw, - help="set RRC excess bandwith factor [default=%default] (PSK)") - parser.add_option("", "--no-gray-code", dest="gray_code", - action="store_false", default=_def_gray_code, - help="disable gray coding on modulated bits (PSK)") - parser.add_option("", "--freq-alpha", type="float", default=_def_freq_alpha, - help="set frequency lock loop alpha gain value [default=%default] (PSK)") - parser.add_option("", "--phase-alpha", type="float", default=_def_phase_alpha, - help="set phase tracking loop alpha value [default=%default] (PSK)") - parser.add_option("", "--timing-alpha", type="float", default=_def_timing_alpha, - help="set timing symbol sync loop gain alpha value [default=%default] (GMSK/PSK)") - parser.add_option("", "--timing-beta", type="float", default=_def_timing_beta, - help="set timing symbol sync loop gain beta value [default=%default] (GMSK/PSK)") - parser.add_option("", "--timing-max-dev", type="float", default=_def_timing_max_dev, - help="set timing symbol sync loop maximum deviation [default=%default] (GMSK/PSK)") - add_options=staticmethod(add_options) - - def extract_kwargs_from_options(options): - """ - Given command line options, create dictionary suitable for passing to __init__ - """ - return modulation_utils2.extract_kwargs_from_options( - dqpsk2_demod.__init__, ('self',), options) - extract_kwargs_from_options=staticmethod(extract_kwargs_from_options) - - -# -# Add these to the mod/demod registry -# -modulation_utils2.add_type_1_mod('dqpsk2', dqpsk2_mod) -modulation_utils2.add_type_1_demod('dqpsk2', dqpsk2_demod) diff --git a/gnuradio-core/src/python/gnuradio/blks2impl/gmsk.py b/gnuradio-core/src/python/gnuradio/blks2impl/gmsk.py deleted file mode 100644 index 3b6c016a0..000000000 --- a/gnuradio-core/src/python/gnuradio/blks2impl/gmsk.py +++ /dev/null @@ -1,292 +0,0 @@ -# -# GMSK modulation and demodulation. -# -# -# Copyright 2005,2006,2007 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# - -# See gnuradio-examples/python/digital for examples - -from gnuradio import gr -from gnuradio import modulation_utils -from math import pi -import numpy -from pprint import pprint -import inspect - -# default values (used in __init__ and add_options) -_def_samples_per_symbol = 2 -_def_bt = 0.35 -_def_verbose = False -_def_log = False - -_def_gain_mu = None -_def_mu = 0.5 -_def_freq_error = 0.0 -_def_omega_relative_limit = 0.005 - - -# ///////////////////////////////////////////////////////////////////////////// -# GMSK modulator -# ///////////////////////////////////////////////////////////////////////////// - -class gmsk_mod(gr.hier_block2): - - def __init__(self, - samples_per_symbol=_def_samples_per_symbol, - bt=_def_bt, - verbose=_def_verbose, - log=_def_log): - """ - Hierarchical block for Gaussian Minimum Shift Key (GMSK) - modulation. - - The input is a byte stream (unsigned char) and the - output is the complex modulated signal at baseband. - - @param samples_per_symbol: samples per baud >= 2 - @type samples_per_symbol: integer - @param bt: Gaussian filter bandwidth * symbol time - @type bt: float - @param verbose: Print information about modulator? - @type verbose: bool - @param debug: Print modualtion data to files? - @type debug: bool - """ - - gr.hier_block2.__init__(self, "gmsk_mod", - gr.io_signature(1, 1, gr.sizeof_char), # Input signature - gr.io_signature(1, 1, gr.sizeof_gr_complex)) # Output signature - - self._samples_per_symbol = samples_per_symbol - self._bt = bt - - if not isinstance(samples_per_symbol, int) or samples_per_symbol < 2: - raise TypeError, ("samples_per_symbol must be an integer >= 2, is %r" % (samples_per_symbol,)) - - ntaps = 4 * samples_per_symbol # up to 3 bits in filter at once - sensitivity = (pi / 2) / samples_per_symbol # phase change per bit = pi / 2 - - # Turn it into NRZ data. - self.nrz = gr.bytes_to_syms() - - # Form Gaussian filter - # Generate Gaussian response (Needs to be convolved with window below). - self.gaussian_taps = gr.firdes.gaussian( - 1, # gain - samples_per_symbol, # symbol_rate - bt, # bandwidth * symbol time - ntaps # number of taps - ) - - self.sqwave = (1,) * samples_per_symbol # rectangular window - self.taps = numpy.convolve(numpy.array(self.gaussian_taps),numpy.array(self.sqwave)) - self.gaussian_filter = gr.interp_fir_filter_fff(samples_per_symbol, self.taps) - - # FM modulation - self.fmmod = gr.frequency_modulator_fc(sensitivity) - - if verbose: - self._print_verbage() - - if log: - self._setup_logging() - - # Connect & Initialize base class - self.connect(self, self.nrz, self.gaussian_filter, self.fmmod, self) - - def samples_per_symbol(self): - return self._samples_per_symbol - - def bits_per_symbol(self=None): # staticmethod that's also callable on an instance - return 1 - bits_per_symbol = staticmethod(bits_per_symbol) # make it a static method. - - - def _print_verbage(self): - print "bits per symbol = %d" % self.bits_per_symbol() - print "Gaussian filter bt = %.2f" % self._bt - - - def _setup_logging(self): - print "Modulation logging turned on." - self.connect(self.nrz, - gr.file_sink(gr.sizeof_float, "nrz.dat")) - self.connect(self.gaussian_filter, - gr.file_sink(gr.sizeof_float, "gaussian_filter.dat")) - self.connect(self.fmmod, - gr.file_sink(gr.sizeof_gr_complex, "fmmod.dat")) - - - def add_options(parser): - """ - Adds GMSK modulation-specific options to the standard parser - """ - parser.add_option("", "--bt", type="float", default=_def_bt, - help="set bandwidth-time product [default=%default] (GMSK)") - add_options=staticmethod(add_options) - - - def extract_kwargs_from_options(options): - """ - Given command line options, create dictionary suitable for passing to __init__ - """ - return modulation_utils.extract_kwargs_from_options(gmsk_mod.__init__, - ('self',), options) - extract_kwargs_from_options=staticmethod(extract_kwargs_from_options) - - - -# ///////////////////////////////////////////////////////////////////////////// -# GMSK demodulator -# ///////////////////////////////////////////////////////////////////////////// - -class gmsk_demod(gr.hier_block2): - - def __init__(self, - samples_per_symbol=_def_samples_per_symbol, - gain_mu=_def_gain_mu, - mu=_def_mu, - omega_relative_limit=_def_omega_relative_limit, - freq_error=_def_freq_error, - verbose=_def_verbose, - log=_def_log): - """ - Hierarchical block for Gaussian Minimum Shift Key (GMSK) - demodulation. - - The input is the complex modulated signal at baseband. - The output is a stream of bits packed 1 bit per byte (the LSB) - - @param samples_per_symbol: samples per baud - @type samples_per_symbol: integer - @param verbose: Print information about modulator? - @type verbose: bool - @param log: Print modualtion data to files? - @type log: bool - - Clock recovery parameters. These all have reasonble defaults. - - @param gain_mu: controls rate of mu adjustment - @type gain_mu: float - @param mu: fractional delay [0.0, 1.0] - @type mu: float - @param omega_relative_limit: sets max variation in omega - @type omega_relative_limit: float, typically 0.000200 (200 ppm) - @param freq_error: bit rate error as a fraction - @param float - """ - - gr.hier_block2.__init__(self, "gmsk_demod", - gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature - gr.io_signature(1, 1, gr.sizeof_char)) # Output signature - - self._samples_per_symbol = samples_per_symbol - self._gain_mu = gain_mu - self._mu = mu - self._omega_relative_limit = omega_relative_limit - self._freq_error = freq_error - - if samples_per_symbol < 2: - raise TypeError, "samples_per_symbol >= 2, is %f" % samples_per_symbol - - self._omega = samples_per_symbol*(1+self._freq_error) - - if not self._gain_mu: - self._gain_mu = 0.175 - - self._gain_omega = .25 * self._gain_mu * self._gain_mu # critically damped - - # Demodulate FM - sensitivity = (pi / 2) / samples_per_symbol - self.fmdemod = gr.quadrature_demod_cf(1.0 / sensitivity) - - # the clock recovery block tracks the symbol clock and resamples as needed. - # the output of the block is a stream of soft symbols (float) - self.clock_recovery = gr.clock_recovery_mm_ff(self._omega, self._gain_omega, - self._mu, self._gain_mu, - self._omega_relative_limit) - - # slice the floats at 0, outputting 1 bit (the LSB of the output byte) per sample - self.slicer = gr.binary_slicer_fb() - - if verbose: - self._print_verbage() - - if log: - self._setup_logging() - - # Connect & Initialize base class - self.connect(self, self.fmdemod, self.clock_recovery, self.slicer, self) - - def samples_per_symbol(self): - return self._samples_per_symbol - - def bits_per_symbol(self=None): # staticmethod that's also callable on an instance - return 1 - bits_per_symbol = staticmethod(bits_per_symbol) # make it a static method. - - - def _print_verbage(self): - print "bits per symbol = %d" % self.bits_per_symbol() - print "M&M clock recovery omega = %f" % self._omega - print "M&M clock recovery gain mu = %f" % self._gain_mu - print "M&M clock recovery mu = %f" % self._mu - print "M&M clock recovery omega rel. limit = %f" % self._omega_relative_limit - print "frequency error = %f" % self._freq_error - - - def _setup_logging(self): - print "Demodulation logging turned on." - self.connect(self.fmdemod, - gr.file_sink(gr.sizeof_float, "fmdemod.dat")) - self.connect(self.clock_recovery, - gr.file_sink(gr.sizeof_float, "clock_recovery.dat")) - self.connect(self.slicer, - gr.file_sink(gr.sizeof_char, "slicer.dat")) - - def add_options(parser): - """ - Adds GMSK demodulation-specific options to the standard parser - """ - parser.add_option("", "--gain-mu", type="float", default=_def_gain_mu, - help="M&M clock recovery gain mu [default=%default] (GMSK/PSK)") - parser.add_option("", "--mu", type="float", default=_def_mu, - help="M&M clock recovery mu [default=%default] (GMSK/PSK)") - parser.add_option("", "--omega-relative-limit", type="float", default=_def_omega_relative_limit, - help="M&M clock recovery omega relative limit [default=%default] (GMSK/PSK)") - parser.add_option("", "--freq-error", type="float", default=_def_freq_error, - help="M&M clock recovery frequency error [default=%default] (GMSK)") - add_options=staticmethod(add_options) - - def extract_kwargs_from_options(options): - """ - Given command line options, create dictionary suitable for passing to __init__ - """ - return modulation_utils.extract_kwargs_from_options(gmsk_demod.__init__, - ('self',), options) - extract_kwargs_from_options=staticmethod(extract_kwargs_from_options) - - -# -# Add these to the mod/demod registry -# -modulation_utils.add_type_1_mod('gmsk', gmsk_mod) -modulation_utils.add_type_1_demod('gmsk', gmsk_demod) diff --git a/gnuradio-core/src/python/gnuradio/gr/Makefile.am b/gnuradio-core/src/python/gnuradio/gr/Makefile.am index 45c970227..e1c79ab4f 100644 --- a/gnuradio-core/src/python/gnuradio/gr/Makefile.am +++ b/gnuradio-core/src/python/gnuradio/gr/Makefile.am @@ -51,7 +51,6 @@ noinst_PYTHON = \ qa_classify.py \ qa_cma_equalizer.py \ qa_complex_to_xxx.py \ - qa_constellation_decoder_cb.py \ qa_copy.py \ qa_correlate_access_code.py \ qa_delay.py \ diff --git a/gnuradio-core/src/python/gnuradio/gr/qa_constellation_decoder_cb.py b/gnuradio-core/src/python/gnuradio/gr/qa_constellation_decoder_cb.py deleted file mode 100755 index 27e1802e0..000000000 --- a/gnuradio-core/src/python/gnuradio/gr/qa_constellation_decoder_cb.py +++ /dev/null @@ -1,53 +0,0 @@ -#!/usr/bin/env python -# -# Copyright 2004,2007,2010 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# - -from gnuradio import gr, gr_unittest -import math - -class test_constellation_decoder (gr_unittest.TestCase): - - def setUp (self): - self.tb = gr.top_block () - - def tearDown (self): - self.tb = None - - def test_constellation_decoder_cb (self): - symbol_positions = [1 + 0j, 0 + 1j , -1 + 0j, 0 - 1j] - symbol_values_out = [0, 1, 2, 3] - expected_result = ( 0, 3, 2, 1, 0, 0, 3) - src_data = (0.5 + 0j, 0.1 - 1.2j, -0.8 - 0.1j, -0.45 + 0.8j, 0.8 - 0j, 0.5 + 0j, 0.1 - 1.2j) - src = gr.vector_source_c (src_data) - op = gr.constellation_decoder_cb (symbol_positions, symbol_values_out) - dst = gr.vector_sink_b () - self.tb.connect (src, op) - self.tb.connect (op, dst) - self.tb.run () # run the graph and wait for it to finish - actual_result = dst.data () # fetch the contents of the sink - #print "actual result", actual_result - #print "expected result", expected_result - self.assertFloatTuplesAlmostEqual (expected_result, actual_result) - - -if __name__ == '__main__': - gr_unittest.run(test_constellation_decoder, "test_constellation_decoder.xml") - |