diff options
| -rw-r--r-- | gr-uhd/grc/gen_uhd_usrp_blocks.py | 65 |
1 files changed, 44 insertions, 21 deletions
diff --git a/gr-uhd/grc/gen_uhd_usrp_blocks.py b/gr-uhd/grc/gen_uhd_usrp_blocks.py index 82b6aa964..20f3ba489 100644 --- a/gr-uhd/grc/gen_uhd_usrp_blocks.py +++ b/gr-uhd/grc/gen_uhd_usrp_blocks.py @@ -29,20 +29,34 @@ MAIN_TMPL = """\ io_type=uhd.io_type.\$type.type, num_channels=\$nchan, ) -\#if \$ref_clk() -self.\$(id).set_clock_config(uhd.clock_config.external(), uhd.ALL_MBOARDS) -\#end if -\#if \$sync() -self.\$(id).set_time_unknown_pps(uhd.time_spec()) -\#end if \#if \$clock_rate() self.\$(id).set_clock_rate(\$clock_rate, uhd.ALL_MBOARDS) \#end if #for $m in range($max_mboards) +######################################################################## +\#if \$num_mboards() > $m and \$ref_source$(m)() == 'external' +self.\$(id).set_clock_config(uhd.clock_config.external(), $m) +\#end if +######################################################################## +\#if \$num_mboards() > $m and \$ref_source$(m)() == 'internal' +self.\$(id).set_clock_config(uhd.clock_config.internal(), $m) +\#end if +######################################################################## +\#if \$num_mboards() > $m and \$ref_source$(m)() == 'mimo' +_config = uhd.clock_config +_config.ref_source = uhd.clock_config.REF_MIMO +_config.pps_source = uhd.clock_config.PPS_MIMO +self.\$(id).set_clock_config(_config, $m) +\#end if +######################################################################## \#if \$num_mboards() > $m and \$sd_spec$(m)() self.\$(id).set_subdev_spec(\$sd_spec$(m), $m) \#end if +######################################################################## #end for +\#if \$sync() +self.\$(id).set_time_unknown_pps(uhd.time_spec()) +\#end if self.\$(id).set_samp_rate(\$samp_rate) #for $n in range($max_nchan) \#if \$nchan() > $n @@ -95,21 +109,6 @@ self.\$(id).set_bandwidth(\$bw$(n), $n) </hide> </param> <param> - <name>Ref Clock</name> - <key>ref_clk</key> - <value></value> - <type>enum</type> - <hide>\#if \$ref_clk() then 'none' else 'part'#</hide> - <option> - <name>External</name> - <key>ext</key> - </option> - <option> - <name>Internal</name> - <key></key> - </option> - </param> - <param> <name>Sync</name> <key>sync</key> <value></value> @@ -150,6 +149,25 @@ self.\$(id).set_bandwidth(\$bw$(n), $n) </param> #for $m in range($max_mboards) <param> + <name>Mb$(m): Ref Source</name> + <key>ref_source$(m)</key> + <value></value> + <type>enum</type> + <hide> + \#if not \$num_mboards() > $m + all + \#elif \$ref_source$(m)() + none + \#else + part + \#end if + </hide> + <option><name>Default</name><key></key></option> + <option><name>Internal</name><key>internal</key></option> + <option><name>External</name><key>external</key></option> + <option><name>MIMO Cable</name><key>mimo</key></option> + </param> + <param> <name>Mb$(m): Subdev Spec</name> <key>sd_spec$(m)</key> <value></value> @@ -209,6 +227,11 @@ USRP2 Example: addr0=192.168.10.2, addr1=192.168.10.3 Num Motherboards: Selects the number of USRP motherboards in this device configuration. +Reference Source: +Where the motherboard should sync its time and clock references. +If source and sink blocks reference the same device, +it is only necessary to set the reference source on one of the blocks. + Subdevice specification: Each motherboard should have its own subdevice specification \\ and all subdevice specifications should be the same length. \\ |