This branch is for porting from the quad radio, and minor text cleanups

The counter is for performance monitoring in firmware, priority encoder
and new interrupt controller are from quad radio and speed up interrupts.
This is tested and it works for me.

1 files changed, 30 insertions, 14 deletions

diff --git a/usrp2/fpga/top/u2_core/u2_core.v b/usrp2/fpga/top/u2_core/u2_core.v
index 03016e9b3..fd17a10a7 100755
--- a/usrp2/fpga/top/u2_core/u2_core.v
+++ b/usrp2/fpga/top/u2_core/u2_core.v
@@ -158,6 +158,7 @@ module u2_core
 	
    wire 	serdes_link_up;
    wire 	epoch;
+   wire [31:0] 	irq;
    
    // ///////////////////////////////////////////////////////////////////////////////////////////////
    // Wishbone Single Master INTERCON
@@ -278,6 +279,7 @@ module u2_core
 		 .wb_we_o(ram_loader_we),.wb_ack_i(ram_loader_ack),
 		 .ram_loader_done_o(ram_loader_done));
 
+   // /////////////////////////////////////////////////////////////////////////
    // Processor
    aeMB_core_BE #(.ISIZ(16),.DSIZ(16),.MUL(0),.BSF(1))
      aeMB (.sys_clk_i(wb_clk), .sys_rst_i(wb_rst),
@@ -292,6 +294,7 @@ module u2_core
    
    assign 	 bus_error = m0_err | m0_rty;
    
+   // /////////////////////////////////////////////////////////////////////////
    // Dual Ported RAM -- D-Port is Slave #0 on main Wishbone
    // I-port connects directly to processor and ram loader
 
@@ -314,6 +317,7 @@ module u2_core
    setting_reg #(.my_addr(7)) sr_icache (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
 					 .in(set_data),.out(),.changed(flush_icache));
 
+   // /////////////////////////////////////////////////////////////////////////
    // Buffer Pool, slave #1
    wire 	 rd0_ready_i, rd0_ready_o;
    wire 	 rd1_ready_i, rd1_ready_o;
@@ -353,6 +357,10 @@ module u2_core
       .rd3_data_o(rd3_dat), .rd3_flags_o(rd3_flags), .rd3_ready_i(rd3_ready_i), .rd3_ready_o(rd3_ready_o)
       );
 
+   wire [31:0] 	 status_enc;
+   priority_enc priority_enc (.in({16'b0,status[15:0]}), .out(status_enc));
+   
+   // /////////////////////////////////////////////////////////////////////////
    // SPI -- Slave #2
    spi_top shared_spi
      (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.wb_adr_i(s2_adr[4:0]),.wb_dat_i(s2_dat_o),
@@ -361,6 +369,7 @@ module u2_core
       .ss_pad_o({sen_tx_db,sen_tx_adc,sen_tx_dac,sen_rx_db,sen_rx_adc,sen_rx_dac,sen_dac,sen_clk}),
       .sclk_pad_o(sclk),.mosi_pad_o(mosi),.miso_pad_i(miso) );
 
+   // /////////////////////////////////////////////////////////////////////////
    // I2C -- Slave #3
    i2c_master_top #(.ARST_LVL(1)) 
      i2c (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.arst_i(1'b0), 
@@ -372,6 +381,7 @@ module u2_core
 
    assign 	 s3_dat_i[31:8] = 24'd0;
    
+   // /////////////////////////////////////////////////////////////////////////
    // GPIOs -- Slave #4
    nsgpio nsgpio(.clk_i(wb_clk),.rst_i(wb_rst),
 		 .cyc_i(s4_cyc),.stb_i(s4_stb),.adr_i(s4_adr[3:0]),.we_i(s4_we),
@@ -379,19 +389,24 @@ module u2_core
 		 .atr(atr_lines),.debug_0(debug_gpio_0),.debug_1(debug_gpio_1),
 		 .gpio( {io_tx,io_rx} ) );
 
-   // Buffer Pool Status -- Slave #5
+   // /////////////////////////////////////////////////////////////////////////
+   // Buffer Pool Status -- Slave #5   
+   
+   reg [31:0] 	 cycle_count;
+   always @(posedge wb_clk)
+     if(wb_rst)
+       cycle_count <= 0;
+     else
+       cycle_count <= cycle_count + 1;
+   
    wb_readback_mux buff_pool_status
-     (.wb_clk_i(wb_clk),
-      .wb_rst_i(wb_rst),
-      .wb_stb_i(s5_stb),
-      .wb_adr_i(s5_adr),
-      .wb_dat_o(s5_dat_i),
-      .wb_ack_o(s5_ack),
+     (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb),
+      .wb_adr_i(s5_adr), .wb_dat_o(s5_dat_i), .wb_ack_o(s5_ack),
       
       .word00(status_b0),.word01(status_b1),.word02(status_b2),.word03(status_b3),
       .word04(status_b4),.word05(status_b5),.word06(status_b6),.word07(status_b7),
       .word08(status),.word09({sim_mode,27'b0,clock_divider[3:0]}),.word10(32'b0),
-      .word11(32'b0),.word12(32'b0),.word13(32'b0),.word14(32'b0),.word15(32'b0)
+      .word11(32'b0),.word12(32'b0),.word13(irq),.word14(status_enc),.word15(cycle_count)
       );
 
    // /////////////////////////////////////////////////////////////////////////
@@ -457,13 +472,14 @@ module u2_core
    // /////////////////////////////////////////////////////////////////////////
    // Interrupt Controller, Slave #8
 
-   wire [15:0] 	 irq={{4'b0, clk_status, serdes_link_up, uart_tx_int, uart_rx_int},
-		      {pps_int,overrun,underrun,PHY_INTn,i2c_int,spi_int,timer_int,buffer_int}};
+   assign irq= {{8'b0},
+		{8'b0},
+		{4'b0, clk_status, serdes_link_up, uart_tx_int, uart_rx_int},
+		{pps_int,overrun,underrun,PHY_INTn,i2c_int,spi_int,timer_int,buffer_int}};
    
-   simple_pic #(.is(16),.dwidth(32)) simple_pic
-     (.clk_i(wb_clk),.rst_i(wb_rst),.cyc_i(s8_cyc),.stb_i(s8_stb),.adr_i(s8_adr[3:2]),
-      .we_i(s8_we),.dat_i(s8_dat_o),.dat_o(s8_dat_i),.ack_o(s8_ack),.int_o(proc_int),
-      .irq(irq) );
+   pic pic(.clk_i(wb_clk),.rst_i(wb_rst),.cyc_i(s8_cyc),.stb_i(s8_stb),.adr_i(s8_adr[3:2]),
+	   .we_i(s8_we),.dat_i(s8_dat_o),.dat_o(s8_dat_i),.ack_o(s8_ack),.int_o(proc_int),
+	   .irq(irq) );
  	 
    // /////////////////////////////////////////////////////////////////////////
    // Master Timer, Slave #9