summaryrefslogtreecommitdiff
path: root/usrp2/fpga/simple_gemac/miim
diff options
context:
space:
mode:
authormatt2009-04-04 01:14:42 +0000
committermatt2009-04-04 01:14:42 +0000
commitd912b81bb3a71c66c4a5ba5d9a74e198d77a4d51 (patch)
treee5af0787a0ca731c7fefc57c3e441c9c6cc647e5 /usrp2/fpga/simple_gemac/miim
parent1ae9012b1191d81200bd45bae343f8b3e056ff59 (diff)
downloadgnuradio-d912b81bb3a71c66c4a5ba5d9a74e198d77a4d51.tar.gz
gnuradio-d912b81bb3a71c66c4a5ba5d9a74e198d77a4d51.tar.bz2
gnuradio-d912b81bb3a71c66c4a5ba5d9a74e198d77a4d51.zip
copied over from other eth core
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10761 221aa14e-8319-0410-a670-987f0aec2ac5
Diffstat (limited to 'usrp2/fpga/simple_gemac/miim')
-rw-r--r--usrp2/fpga/simple_gemac/miim/eth_clockgen.v141
-rw-r--r--usrp2/fpga/simple_gemac/miim/eth_miim.v470
-rw-r--r--usrp2/fpga/simple_gemac/miim/eth_outputcontrol.v158
-rw-r--r--usrp2/fpga/simple_gemac/miim/eth_shiftreg.v159
4 files changed, 928 insertions, 0 deletions
diff --git a/usrp2/fpga/simple_gemac/miim/eth_clockgen.v b/usrp2/fpga/simple_gemac/miim/eth_clockgen.v
new file mode 100644
index 000000000..9da732f7f
--- /dev/null
+++ b/usrp2/fpga/simple_gemac/miim/eth_clockgen.v
@@ -0,0 +1,141 @@
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// eth_clockgen.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects/ethmac/ ////
+//// ////
+//// Author(s): ////
+//// - Igor Mohor (igorM@opencores.org) ////
+//// ////
+//// All additional information is avaliable in the Readme.txt ////
+//// file. ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: eth_clockgen.v,v $
+// Revision 1.2 2005/12/13 12:54:49 maverickist
+// first simulation passed
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+// Revision 1.2 2005/04/27 15:58:45 Administrator
+// no message
+//
+// Revision 1.1.1.1 2004/12/15 06:38:54 Administrator
+// no message
+//
+// Revision 1.3 2002/01/23 10:28:16 mohor
+// Link in the header changed.
+//
+// Revision 1.2 2001/10/19 08:43:51 mohor
+// eth_timescale.v changed to timescale.v This is done because of the
+// simulation of the few cores in a one joined project.
+//
+// Revision 1.1 2001/08/06 14:44:29 mohor
+// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
+// Include files fixed to contain no path.
+// File names and module names changed ta have a eth_ prologue in the name.
+// File eth_timescale.v is used to define timescale
+// All pin names on the top module are changed to contain _I, _O or _OE at the end.
+// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
+// and Mdo_OE. The bidirectional signal must be created on the top level. This
+// is done due to the ASIC tools.
+//
+// Revision 1.1 2001/07/30 21:23:42 mohor
+// Directory structure changed. Files checked and joind together.
+//
+// Revision 1.3 2001/06/01 22:28:55 mohor
+// This files (MIIM) are fully working. They were thoroughly tested. The testbench is not updated.
+//
+//
+
+module eth_clockgen(Clk, Reset, Divider, MdcEn, MdcEn_n, Mdc);
+
+//parameter Tp=1;
+
+input Clk; // Input clock (Host clock)
+input Reset; // Reset signal
+input [7:0] Divider; // Divider (input clock will be divided by the Divider[7:0])
+
+output Mdc; // Output clock
+output MdcEn; // Enable signal is asserted for one Clk period before Mdc rises.
+output MdcEn_n; // Enable signal is asserted for one Clk period before Mdc falls.
+
+reg Mdc;
+reg [7:0] Counter;
+
+wire CountEq0;
+wire [7:0] CounterPreset;
+wire [7:0] TempDivider;
+
+
+assign TempDivider[7:0] = (Divider[7:0]<2)? 8'h02 : Divider[7:0]; // If smaller than 2
+assign CounterPreset[7:0] = (TempDivider[7:0]>>1) -1; // We are counting half of period
+
+
+// Counter counts half period
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ Counter[7:0] <= 8'h1;
+ else
+ begin
+ if(CountEq0)
+ begin
+ Counter[7:0] <= CounterPreset[7:0];
+ end
+ else
+ Counter[7:0] <= Counter - 8'h1;
+ end
+end
+
+
+// Mdc is asserted every other half period
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ Mdc <= 1'b0;
+ else
+ begin
+ if(CountEq0)
+ Mdc <= ~Mdc;
+ end
+end
+
+
+assign CountEq0 = Counter == 8'h0;
+assign MdcEn = CountEq0 & ~Mdc;
+assign MdcEn_n = CountEq0 & Mdc;
+
+endmodule
+
+
diff --git a/usrp2/fpga/simple_gemac/miim/eth_miim.v b/usrp2/fpga/simple_gemac/miim/eth_miim.v
new file mode 100644
index 000000000..a15c94205
--- /dev/null
+++ b/usrp2/fpga/simple_gemac/miim/eth_miim.v
@@ -0,0 +1,470 @@
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// eth_miim.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects/ethmac/ ////
+//// ////
+//// Author(s): ////
+//// - Igor Mohor (igorM@opencores.org) ////
+//// ////
+//// All additional information is avaliable in the Readme.txt ////
+//// file. ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: eth_miim.v,v $
+// Revision 1.3 2006/01/19 14:07:53 maverickist
+// verification is complete.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+// Revision 1.4 2005/08/16 12:07:57 Administrator
+// no message
+//
+// Revision 1.3 2005/05/19 07:04:29 Administrator
+// no message
+//
+// Revision 1.2 2005/04/27 15:58:46 Administrator
+// no message
+//
+// Revision 1.1.1.1 2004/12/15 06:38:54 Administrator
+// no message
+//
+// Revision 1.5 2003/05/16 10:08:27 mohor
+// Busy was set 2 cycles too late. Reported by Dennis Scott.
+//
+// Revision 1.4 2002/08/14 18:32:10 mohor
+// - Busy signal was not set on time when scan status operation was performed
+// and clock was divided with more than 2.
+// - Nvalid remains valid two more clocks (was previously cleared too soon).
+//
+// Revision 1.3 2002/01/23 10:28:16 mohor
+// Link in the header changed.
+//
+// Revision 1.2 2001/10/19 08:43:51 mohor
+// eth_timescale.v changed to timescale.v This is done because of the
+// simulation of the few cores in a one joined project.
+//
+// Revision 1.1 2001/08/06 14:44:29 mohor
+// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
+// Include files fixed to contain no path.
+// File names and module names changed ta have a eth_ prologue in the name.
+// File eth_timescale.v is used to define timescale
+// All pin names on the top module are changed to contain _I, _O or _OE at the end.
+// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
+// and Mdo_OE. The bidirectional signal must be created on the top level. This
+// is done due to the ASIC tools.
+//
+// Revision 1.2 2001/08/02 09:25:31 mohor
+// Unconnected signals are now connected.
+//
+// Revision 1.1 2001/07/30 21:23:42 mohor
+// Directory structure changed. Files checked and joind together.
+//
+// Revision 1.3 2001/06/01 22:28:56 mohor
+// This files (MIIM) are fully working. They were thoroughly tested. The testbench is not updated.
+//
+//
+
+module eth_miim
+(
+ Clk,
+ Reset,
+ Divider,
+ NoPre,
+ CtrlData,
+ Rgad,
+ Fiad,
+ WCtrlData,
+ RStat,
+ ScanStat,
+ Mdio,
+ Mdc,
+ Busy,
+ Prsd,
+ LinkFail,
+ Nvalid,
+ WCtrlDataStart,
+ RStatStart,
+ UpdateMIIRX_DATAReg
+);
+
+input Clk; // Host Clock
+input Reset; // General Reset
+input [7:0] Divider; // Divider for the host clock
+input [15:0] CtrlData; // Control Data (to be written to the PHY reg.)
+input [4:0] Rgad; // Register Address (within the PHY)
+input [4:0] Fiad; // PHY Address
+input NoPre; // No Preamble (no 32-bit preamble)
+input WCtrlData; // Write Control Data operation
+input RStat; // Read Status operation
+input ScanStat; // Scan Status operation
+inout Mdio; // MII Management Data In
+
+output Mdc; // MII Management Data Clock
+
+output Busy; // Busy Signal
+output LinkFail; // Link Integrity Signal
+output Nvalid; // Invalid Status (qualifier for the valid scan result)
+
+output [15:0] Prsd; // Read Status Data (data read from the PHY)
+
+output WCtrlDataStart; // This signals resets the WCTRLDATA bit in the MIIM Command register
+output RStatStart; // This signal resets the RSTAT BIT in the MIIM Command register
+output UpdateMIIRX_DATAReg;// Updates MII RX_DATA register with read data
+
+//parameter Tp = 1;
+
+
+reg Nvalid;
+reg EndBusy_d; // Pre-end Busy signal
+reg EndBusy; // End Busy signal (stops the operation in progress)
+
+reg WCtrlData_q1; // Write Control Data operation delayed 1 Clk cycle
+reg WCtrlData_q2; // Write Control Data operation delayed 2 Clk cycles
+reg WCtrlData_q3; // Write Control Data operation delayed 3 Clk cycles
+reg WCtrlDataStart; // Start Write Control Data Command (positive edge detected)
+reg WCtrlDataStart_q;
+reg WCtrlDataStart_q1; // Start Write Control Data Command delayed 1 Mdc cycle
+reg WCtrlDataStart_q2; // Start Write Control Data Command delayed 2 Mdc cycles
+
+reg RStat_q1; // Read Status operation delayed 1 Clk cycle
+reg RStat_q2; // Read Status operation delayed 2 Clk cycles
+reg RStat_q3; // Read Status operation delayed 3 Clk cycles
+reg RStatStart; // Start Read Status Command (positive edge detected)
+reg RStatStart_q1; // Start Read Status Command delayed 1 Mdc cycle
+reg RStatStart_q2; // Start Read Status Command delayed 2 Mdc cycles
+
+reg ScanStat_q1; // Scan Status operation delayed 1 cycle
+reg ScanStat_q2; // Scan Status operation delayed 2 cycles
+reg SyncStatMdcEn; // Scan Status operation delayed at least cycles and synchronized to MdcEn
+
+wire WriteDataOp; // Write Data Operation (positive edge detected)
+wire ReadStatusOp; // Read Status Operation (positive edge detected)
+wire ScanStatusOp; // Scan Status Operation (positive edge detected)
+wire StartOp; // Start Operation (start of any of the preceding operations)
+wire EndOp; // End of Operation
+
+reg InProgress; // Operation in progress
+reg InProgress_q1; // Operation in progress delayed 1 Mdc cycle
+reg InProgress_q2; // Operation in progress delayed 2 Mdc cycles
+reg InProgress_q3; // Operation in progress delayed 3 Mdc cycles
+
+reg WriteOp; // Write Operation Latch (When asserted, write operation is in progress)
+reg [6:0] BitCounter; // Bit Counter
+
+
+wire [3:0] ByteSelect; // Byte Select defines which byte (preamble, data, operation, etc.) is loaded and shifted through the shift register.
+wire MdcEn; // MII Management Data Clock Enable signal is asserted for one Clk period before Mdc rises.
+wire ShiftedBit; // This bit is output of the shift register and is connected to the Mdo signal
+
+
+wire LatchByte1_d2;
+wire LatchByte0_d2;
+reg LatchByte1_d;
+reg LatchByte0_d;
+reg [1:0] LatchByte; // Latch Byte selects which part of Read Status Data is updated from the shift register
+
+reg UpdateMIIRX_DATAReg;// Updates MII RX_DATA register with read data
+
+wire Mdo; // MII Management Data Output
+wire MdoEn; // MII Management Data Output Enable
+wire Mdi;
+
+assign Mdi=Mdio;
+assign Mdio=MdoEn?Mdo:1'bz;
+
+
+
+// Generation of the EndBusy signal. It is used for ending the MII Management operation.
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ EndBusy_d <= 1'b0;
+ EndBusy <= 1'b0;
+ end
+ else
+ begin
+ EndBusy_d <= ~InProgress_q2 & InProgress_q3;
+ EndBusy <= EndBusy_d;
+ end
+end
+
+
+// Update MII RX_DATA register
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ UpdateMIIRX_DATAReg <= 0;
+ else
+ if(EndBusy & ~WCtrlDataStart_q)
+ UpdateMIIRX_DATAReg <= 1;
+ else
+ UpdateMIIRX_DATAReg <= 0;
+end
+
+
+
+// Generation of the delayed signals used for positive edge triggering.
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ WCtrlData_q1 <= 1'b0;
+ WCtrlData_q2 <= 1'b0;
+ WCtrlData_q3 <= 1'b0;
+
+ RStat_q1 <= 1'b0;
+ RStat_q2 <= 1'b0;
+ RStat_q3 <= 1'b0;
+
+ ScanStat_q1 <= 1'b0;
+ ScanStat_q2 <= 1'b0;
+ SyncStatMdcEn <= 1'b0;
+ end
+ else
+ begin
+ WCtrlData_q1 <= WCtrlData;
+ WCtrlData_q2 <= WCtrlData_q1;
+ WCtrlData_q3 <= WCtrlData_q2;
+
+ RStat_q1 <= RStat;
+ RStat_q2 <= RStat_q1;
+ RStat_q3 <= RStat_q2;
+
+ ScanStat_q1 <= ScanStat;
+ ScanStat_q2 <= ScanStat_q1;
+ if(MdcEn)
+ SyncStatMdcEn <= ScanStat_q2;
+ end
+end
+
+
+// Generation of the Start Commands (Write Control Data or Read Status)
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ WCtrlDataStart <= 1'b0;
+ WCtrlDataStart_q <= 1'b0;
+ RStatStart <= 1'b0;
+ end
+ else
+ begin
+ if(EndBusy)
+ begin
+ WCtrlDataStart <= 1'b0;
+ RStatStart <= 1'b0;
+ end
+ else
+ begin
+ if(WCtrlData_q2 & ~WCtrlData_q3)
+ WCtrlDataStart <= 1'b1;
+ if(RStat_q2 & ~RStat_q3)
+ RStatStart <= 1'b1;
+ WCtrlDataStart_q <= WCtrlDataStart;
+ end
+ end
+end
+
+
+// Generation of the Nvalid signal (indicates when the status is invalid)
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ Nvalid <= 1'b0;
+ else
+ begin
+ if(~InProgress_q2 & InProgress_q3)
+ begin
+ Nvalid <= 1'b0;
+ end
+ else
+ begin
+ if(ScanStat_q2 & ~SyncStatMdcEn)
+ Nvalid <= 1'b1;
+ end
+ end
+end
+
+// Signals used for the generation of the Operation signals (positive edge)
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ WCtrlDataStart_q1 <= 1'b0;
+ WCtrlDataStart_q2 <= 1'b0;
+
+ RStatStart_q1 <= 1'b0;
+ RStatStart_q2 <= 1'b0;
+
+ InProgress_q1 <= 1'b0;
+ InProgress_q2 <= 1'b0;
+ InProgress_q3 <= 1'b0;
+
+ LatchByte0_d <= 1'b0;
+ LatchByte1_d <= 1'b0;
+
+ LatchByte <= 2'b00;
+ end
+ else
+ begin
+ if(MdcEn)
+ begin
+ WCtrlDataStart_q1 <= WCtrlDataStart;
+ WCtrlDataStart_q2 <= WCtrlDataStart_q1;
+
+ RStatStart_q1 <= RStatStart;
+ RStatStart_q2 <= RStatStart_q1;
+
+ LatchByte[0] <= LatchByte0_d;
+ LatchByte[1] <= LatchByte1_d;
+
+ LatchByte0_d <= LatchByte0_d2;
+ LatchByte1_d <= LatchByte1_d2;
+
+ InProgress_q1 <= InProgress;
+ InProgress_q2 <= InProgress_q1;
+ InProgress_q3 <= InProgress_q2;
+ end
+ end
+end
+
+
+// Generation of the Operation signals
+assign WriteDataOp = WCtrlDataStart_q1 & ~WCtrlDataStart_q2;
+assign ReadStatusOp = RStatStart_q1 & ~RStatStart_q2;
+assign ScanStatusOp = SyncStatMdcEn & ~InProgress & ~InProgress_q1 & ~InProgress_q2;
+assign StartOp = WriteDataOp | ReadStatusOp | ScanStatusOp;
+
+// Busy
+reg Busy;
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Busy <=0;
+ else if(WCtrlData | WCtrlDataStart | RStat | RStatStart | SyncStatMdcEn | EndBusy | InProgress | InProgress_q3 | Nvalid)
+ Busy <=1;
+ else
+ Busy <=0;
+
+//assign Busy = WCtrlData | WCtrlDataStart | RStat | RStatStart | SyncStatMdcEn | EndBusy | InProgress | InProgress_q3 | Nvalid;
+
+
+// Generation of the InProgress signal (indicates when an operation is in progress)
+// Generation of the WriteOp signal (indicates when a write is in progress)
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ InProgress <= 1'b0;
+ WriteOp <= 1'b0;
+ end
+ else
+ begin
+ if(MdcEn)
+ begin
+ if(StartOp)
+ begin
+ if(~InProgress)
+ WriteOp <= WriteDataOp;
+ InProgress <= 1'b1;
+ end
+ else
+ begin
+ if(EndOp)
+ begin
+ InProgress <= 1'b0;
+ WriteOp <= 1'b0;
+ end
+ end
+ end
+ end
+end
+
+
+
+// Bit Counter counts from 0 to 63 (from 32 to 63 when NoPre is asserted)
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ BitCounter[6:0] <= 7'h0;
+ else
+ begin
+ if(MdcEn)
+ begin
+ if(InProgress)
+ begin
+ if(NoPre & ( BitCounter == 7'h0 ))
+ BitCounter[6:0] <= 7'h21;
+ else
+ BitCounter[6:0] <= BitCounter[6:0] + 1'b1;
+ end
+ else
+ BitCounter[6:0] <= 7'h0;
+ end
+ end
+end
+
+
+// Operation ends when the Bit Counter reaches 63
+assign EndOp = BitCounter==63;
+
+assign ByteSelect[0] = InProgress & ((NoPre & (BitCounter == 7'h0)) | (~NoPre & (BitCounter == 7'h20)));
+assign ByteSelect[1] = InProgress & (BitCounter == 7'h28);
+assign ByteSelect[2] = InProgress & WriteOp & (BitCounter == 7'h30);
+assign ByteSelect[3] = InProgress & WriteOp & (BitCounter == 7'h38);
+
+
+// Latch Byte selects which part of Read Status Data is updated from the shift register
+assign LatchByte1_d2 = InProgress & ~WriteOp & BitCounter == 7'h37;
+assign LatchByte0_d2 = InProgress & ~WriteOp & BitCounter == 7'h3F;
+
+wire MdcEn_n;
+
+// Connecting the Clock Generator Module
+eth_clockgen clkgen(.Clk(Clk), .Reset(Reset), .Divider(Divider[7:0]), .MdcEn(MdcEn), .MdcEn_n(MdcEn_n), .Mdc(Mdc)
+ );
+
+// Connecting the Shift Register Module
+eth_shiftreg shftrg(.Clk(Clk), .Reset(Reset), .MdcEn_n(MdcEn_n), .Mdi(Mdi), .Fiad(Fiad), .Rgad(Rgad),
+ .CtrlData(CtrlData), .WriteOp(WriteOp), .ByteSelect(ByteSelect), .LatchByte(LatchByte),
+ .ShiftedBit(ShiftedBit), .Prsd(Prsd), .LinkFail(LinkFail)
+ );
+
+// Connecting the Output Control Module
+eth_outputcontrol outctrl(.Clk(Clk), .Reset(Reset), .MdcEn_n(MdcEn_n), .InProgress(InProgress),
+ .ShiftedBit(ShiftedBit), .BitCounter(BitCounter), .WriteOp(WriteOp), .NoPre(NoPre),
+ .Mdo(Mdo), .MdoEn(MdoEn)
+ );
+
+endmodule
diff --git a/usrp2/fpga/simple_gemac/miim/eth_outputcontrol.v b/usrp2/fpga/simple_gemac/miim/eth_outputcontrol.v
new file mode 100644
index 000000000..3df6c560a
--- /dev/null
+++ b/usrp2/fpga/simple_gemac/miim/eth_outputcontrol.v
@@ -0,0 +1,158 @@
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// eth_outputcontrol.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects/ethmac/ ////
+//// ////
+//// Author(s): ////
+//// - Igor Mohor (igorM@opencores.org) ////
+//// ////
+//// All additional information is avaliable in the Readme.txt ////
+//// file. ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: eth_outputcontrol.v,v $
+// Revision 1.2 2005/12/13 12:54:49 maverickist
+// first simulation passed
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+// Revision 1.2 2005/04/27 15:58:46 Administrator
+// no message
+//
+// Revision 1.1.1.1 2004/12/15 06:38:54 Administrator
+// no message
+//
+// Revision 1.4 2002/07/09 20:11:59 mohor
+// Comment removed.
+//
+// Revision 1.3 2002/01/23 10:28:16 mohor
+// Link in the header changed.
+//
+// Revision 1.2 2001/10/19 08:43:51 mohor
+// eth_timescale.v changed to timescale.v This is done because of the
+// simulation of the few cores in a one joined project.
+//
+// Revision 1.1 2001/08/06 14:44:29 mohor
+// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
+// Include files fixed to contain no path.
+// File names and module names changed ta have a eth_ prologue in the name.
+// File eth_timescale.v is used to define timescale
+// All pin names on the top module are changed to contain _I, _O or _OE at the end.
+// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
+// and Mdo_OE. The bidirectional signal must be created on the top level. This
+// is done due to the ASIC tools.
+//
+// Revision 1.1 2001/07/30 21:23:42 mohor
+// Directory structure changed. Files checked and joind together.
+//
+// Revision 1.3 2001/06/01 22:28:56 mohor
+// This files (MIIM) are fully working. They were thoroughly tested. The testbench is not updated.
+//
+//
+
+module eth_outputcontrol(Clk, Reset, InProgress, ShiftedBit, BitCounter, WriteOp, NoPre, MdcEn_n, Mdo, MdoEn);
+
+input Clk; // Host Clock
+input Reset; // General Reset
+input WriteOp; // Write Operation Latch (When asserted, write operation is in progress)
+input NoPre; // No Preamble (no 32-bit preamble)
+input InProgress; // Operation in progress
+input ShiftedBit; // This bit is output of the shift register and is connected to the Mdo signal
+input [6:0] BitCounter; // Bit Counter
+input MdcEn_n; // MII Management Data Clock Enable signal is asserted for one Clk period before Mdc falls.
+
+output Mdo; // MII Management Data Output
+output MdoEn; // MII Management Data Output Enable
+
+wire SerialEn;
+
+reg MdoEn_2d;
+reg MdoEn_d;
+reg MdoEn;
+
+reg Mdo_2d;
+reg Mdo_d;
+reg Mdo; // MII Management Data Output
+
+
+
+// Generation of the Serial Enable signal (enables the serialization of the data)
+assign SerialEn = WriteOp & InProgress & ( BitCounter>31 | ( ( BitCounter == 0 ) & NoPre ) )
+ | ~WriteOp & InProgress & (( BitCounter>31 & BitCounter<46 ) | ( ( BitCounter == 0 ) & NoPre ));
+
+
+// Generation of the MdoEn signal
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ MdoEn_2d <= 1'b0;
+ MdoEn_d <= 1'b0;
+ MdoEn <= 1'b0;
+ end
+ else
+ begin
+ if(MdcEn_n)
+ begin
+ MdoEn_2d <= SerialEn | InProgress & BitCounter<32;
+ MdoEn_d <= MdoEn_2d;
+ MdoEn <= MdoEn_d;
+ end
+ end
+end
+
+
+// Generation of the Mdo signal.
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ Mdo_2d <= 1'b0;
+ Mdo_d <= 1'b0;
+ Mdo <= 1'b0;
+ end
+ else
+ begin
+ if(MdcEn_n)
+ begin
+ Mdo_2d <= ~SerialEn & BitCounter<32;
+ Mdo_d <= ShiftedBit | Mdo_2d;
+ Mdo <= Mdo_d;
+ end
+ end
+end
+
+
+
+endmodule
diff --git a/usrp2/fpga/simple_gemac/miim/eth_shiftreg.v b/usrp2/fpga/simple_gemac/miim/eth_shiftreg.v
new file mode 100644
index 000000000..0b97bb7bc
--- /dev/null
+++ b/usrp2/fpga/simple_gemac/miim/eth_shiftreg.v
@@ -0,0 +1,159 @@
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// eth_shiftreg.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects/ethmac/ ////
+//// ////
+//// Author(s): ////
+//// - Igor Mohor (igorM@opencores.org) ////
+//// ////
+//// All additional information is avaliable in the Readme.txt ////
+//// file. ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: eth_shiftreg.v,v $
+// Revision 1.2 2005/12/13 12:54:49 maverickist
+// first simulation passed
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+// Revision 1.2 2005/04/27 15:58:47 Administrator
+// no message
+//
+// Revision 1.1.1.1 2004/12/15 06:38:54 Administrator
+// no message
+//
+// Revision 1.5 2002/08/14 18:16:59 mohor
+// LinkFail signal was not latching appropriate bit.
+//
+// Revision 1.4 2002/03/02 21:06:01 mohor
+// LinkFail signal was not latching appropriate bit.
+//
+// Revision 1.3 2002/01/23 10:28:16 mohor
+// Link in the header changed.
+//
+// Revision 1.2 2001/10/19 08:43:51 mohor
+// eth_timescale.v changed to timescale.v This is done because of the
+// simulation of the few cores in a one joined project.
+//
+// Revision 1.1 2001/08/06 14:44:29 mohor
+// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
+// Include files fixed to contain no path.
+// File names and module names changed ta have a eth_ prologue in the name.
+// File eth_timescale.v is used to define timescale
+// All pin names on the top module are changed to contain _I, _O or _OE at the end.
+// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
+// and Mdo_OE. The bidirectional signal must be created on the top level. This
+// is done due to the ASIC tools.
+//
+// Revision 1.1 2001/07/30 21:23:42 mohor
+// Directory structure changed. Files checked and joind together.
+//
+// Revision 1.3 2001/06/01 22:28:56 mohor
+// This files (MIIM) are fully working. They were thoroughly tested. The testbench is not updated.
+//
+//
+
+module eth_shiftreg(Clk, Reset, MdcEn_n, Mdi, Fiad, Rgad, CtrlData, WriteOp, ByteSelect,
+ LatchByte, ShiftedBit, Prsd, LinkFail);
+
+
+input Clk; // Input clock (Host clock)
+input Reset; // Reset signal
+input MdcEn_n; // Enable signal is asserted for one Clk period before Mdc falls.
+input Mdi; // MII input data
+input [4:0] Fiad; // PHY address
+input [4:0] Rgad; // Register address (within the selected PHY)
+input [15:0]CtrlData; // Control data (data to be written to the PHY)
+input WriteOp; // The current operation is a PHY register write operation
+input [3:0] ByteSelect; // Byte select
+input [1:0] LatchByte; // Byte select for latching (read operation)
+
+output ShiftedBit; // Bit shifted out of the shift register
+output[15:0]Prsd; // Read Status Data (data read from the PHY)
+output LinkFail; // Link Integrity Signal
+
+reg [7:0] ShiftReg; // Shift register for shifting the data in and out
+reg [15:0]Prsd;
+reg LinkFail;
+
+
+
+
+// ShiftReg[7:0] :: Shift Register Data
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ ShiftReg[7:0] <= 8'h0;
+ Prsd[15:0] <= 16'h0;
+ LinkFail <= 1'b0;
+ end
+ else
+ begin
+ if(MdcEn_n)
+ begin
+ if(|ByteSelect)
+ begin
+ case (ByteSelect[3:0])
+ 4'h1 : ShiftReg[7:0] <= {2'b01, ~WriteOp, WriteOp, Fiad[4:1]};
+ 4'h2 : ShiftReg[7:0] <= {Fiad[0], Rgad[4:0], 2'b10};
+ 4'h4 : ShiftReg[7:0] <= CtrlData[15:8];
+ 4'h8 : ShiftReg[7:0] <= CtrlData[7:0];
+ default : ShiftReg[7:0] <= 8'h0;
+ endcase
+ end
+ else
+ begin
+ ShiftReg[7:0] <= {ShiftReg[6:0], Mdi};
+ if(LatchByte[0])
+ begin
+ Prsd[7:0] <= {ShiftReg[6:0], Mdi};
+ if(Rgad == 5'h01)
+ LinkFail <= ~ShiftReg[1]; // this is bit [2], because it is not shifted yet
+ end
+ else
+ begin
+ if(LatchByte[1])
+ Prsd[15:8] <= {ShiftReg[6:0], Mdi};
+ end
+ end
+ end
+ end
+end
+
+
+assign ShiftedBit = ShiftReg[7];
+
+
+endmodule
generated by cgit (git 2.34.1) at 2024-12-22 15:34:24 +0000