xcvr dboard support

gain setting coded, not tested
set freq not implemented



git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10338 221aa14e-8319-0410-a670-987f0aec2ac5

3 files changed, 293 insertions, 0 deletions

diff --git a/usrp2/firmware/lib/Makefile.am b/usrp2/firmware/lib/Makefile.am
index 247123d62..37c74c91e 100644
--- a/usrp2/firmware/lib/Makefile.am
+++ b/usrp2/firmware/lib/Makefile.am
@@ -33,6 +33,7 @@ libu2fw_a_SOURCES = \
 	db_init.c \
 	db_rfx.c \
 	db_tvrx.c \
+	db_xcvr2450.c \
 	dbsm.c \
 	eeprom.c \
 	ethernet.c \
diff --git a/usrp2/firmware/lib/db_init.c b/usrp2/firmware/lib/db_init.c
index e6a52194a..c3e8a058c 100644
--- a/usrp2/firmware/lib/db_init.c
+++ b/usrp2/firmware/lib/db_init.c
@@ -50,6 +50,9 @@ extern struct db_base db_tvrx2;
 extern struct db_base db_tvrx3;
 extern struct db_base db_dbsrx;
 
+extern struct db_base db_xcvr2450_tx;
+extern struct db_base db_xcvr2450_rx;
+
 struct db_base *all_dboards[] = {
   &db_basic_tx,
   &db_basic_rx,
@@ -69,6 +72,8 @@ struct db_base *all_dboards[] = {
   &db_tvrx2,
   &db_tvrx3,
   &db_dbsrx,
+  &db_xcvr2450_tx,
+  &db_xcvr2450_rx,
   0
 };
 
diff --git a/usrp2/firmware/lib/db_xcvr2450.c b/usrp2/firmware/lib/db_xcvr2450.c
new file mode 100644
index 000000000..103eb7629
--- /dev/null
+++ b/usrp2/firmware/lib/db_xcvr2450.c
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2009 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <db_base.h>
+#include <stdio.h>
+#include <spi.h>
+
+// RX IO Pins
+#define LOCKDET (1 << 15)           // This is an INPUT!!!
+#define EN      (1 << 14)
+#define RX_EN   (1 << 13)           // 1 = RX on, 0 = RX off
+#define RX_HP   (1 << 12)
+#define B1      (1 << 11)
+#define B2      (1 << 10)
+#define B3      (1 << 9)
+#define B4      (1 << 8)
+#define B5      (1 << 7)
+#define B6      (1 << 6)
+#define B7      (1 << 5)
+#define RX_OE_MASK EN|RX_EN|RX_HP|B1|B2|B3|B4|B5|B6|B7
+#define RX_SAFE_IO EN
+
+// TX IO Pins
+#define HB_PA_OFF      (1 << 15)    // 5GHz PA, 1 = off, 0 = on
+#define LB_PA_OFF      (1 << 14)    // 2.4GHz PA, 1 = off, 0 = on
+#define ANTSEL_TX1_RX2 (1 << 13)    // 1 = Ant 1 to TX, Ant 2 to RX
+#define ANTSEL_TX2_RX1 (1 << 12)    // 1 = Ant 2 to TX, Ant 1 to RX
+#define TX_EN          (1 << 11)    // 1 = TX on, 0 = TX off
+#define AD9515DIV      (1 << 4)     // 1 = Div  by 3, 0 = Div by 2
+#define TX_OE_MASK HB_PA_OFF|LB_PA_OFF|ANTSEL_TX1_RX2|ANTSEL_TX2_RX1|TX_EN|AD9515DIV
+#define TX_SAFE_IO HB_PA_OFF|LB_PA_OFF|ANTSEL_TX1_RX2|AD9515DIV
+
+#define TUN_FREQ_MIN U2_DOUBLE_TO_FXPT_FREQ(2.4e9)
+#define TUN_FREQ_MAX U2_DOUBLE_TO_FXPT_FREQ(6.0e9)
+
+bool xcvr2450_init(struct db_base *db);
+bool xcvr2450_set_freq(struct db_base *db, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc);
+bool xcvr2450_set_gain_rx(struct db_base *db, u2_fxpt_gain_t gain);
+bool xcvr2450_set_gain_tx(struct db_base *db, u2_fxpt_gain_t gain);
+bool xcvr2450_set_tx_enable(struct db_base *db, bool on);
+
+struct db_xcvr2450_common {
+  //int d_spi_format, d_spi_enable;
+  
+  int d_mimo, d_int_div, d_frac_div, d_highband, d_five_gig;
+  int d_cp_current, d_ref_div, d_rssi_hbw;
+  int d_txlpf_bw, d_rxlpf_bw, d_rxlpf_fine, d_rxvga_ser;
+  int d_rssi_range, d_rssi_mode, d_rssi_mux;
+  int d_rx_hp_pin, d_rx_hpf, d_rx_ant;
+  int d_tx_ant, d_txvga_ser, d_tx_driver_lin;
+  int d_tx_vga_lin, d_tx_upconv_lin, d_tx_bb_gain;
+  int d_pabias_delay, d_pabias; //rx_rf_gain, rx_bb_gain;//, d_txgain;
+  //int d_rx_rf_gain, d_rx_bb_gain;
+
+  int d_reg_standby, d_reg_int_divider, d_reg_frac_divider, d_reg_bandselpll;
+  int d_reg_cal, dsend_reg, d_reg_lpf, d_reg_rxrssi_ctrl, d_reg_txlin_gain;
+  int d_reg_pabias;//, d_reg_rxgain;//, d_reg_txgain;
+
+  int d_ad9515_div;
+
+  int spi_mask;
+};
+
+struct db_xcvr2450_dummy {
+  struct db_base base;
+  struct db_xcvr2450_common common;
+};
+
+struct db_xcvr2450_rx {
+  struct db_base base;
+  struct db_xcvr2450_common common;
+};
+
+struct db_xcvr2450_tx {
+  struct db_base base;
+  struct db_xcvr2450_common common;
+};
+
+/*
+ * The class instances
+ */
+struct db_xcvr2450_rx db_xcvr2450_rx = {
+  .base.dbid = 0x0061,
+  .base.is_tx = false,
+  .base.output_enables = RX_OE_MASK,
+  .base.used_pins = RX_SAFE_IO,
+  .base.freq_min = TUN_FREQ_MIN,
+  .base.freq_max = TUN_FREQ_MAX,
+  .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0),
+  .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(92),
+  .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(1),
+  .base.is_quadrature = true,
+  .base.i_and_q_swapped = true,
+  .base.spectrum_inverted = false,
+  //.base.lo_offset = U2_DOUBLE_TO_FXPT_FREQ(4.25e6),
+  .base.init = xcvr2450_init,
+  .base.set_freq = xcvr2450_set_freq,
+  .base.set_gain = xcvr2450_set_gain_rx,
+  .base.set_tx_enable = 0,
+  .base.atr_mask = 0x00E0, //CHECK this
+  //.base.atr_txval = POWER_UP,
+  //.base.atr_rxval = POWER_UP|MIX_EN,
+  // .base.atr_tx_delay =
+  // .base.atr_rx_delay =
+  .common.spi_mask = SPI_SS_RX_DB,
+};
+
+struct db_xcvr2450_tx db_xcvr2450_tx = {
+  .base.dbid = 0x0060,
+  .base.is_tx = true,
+  .base.output_enables = TX_OE_MASK,
+  .base.used_pins = TX_SAFE_IO,
+  .base.freq_min = TUN_FREQ_MIN,
+  .base.freq_max = TUN_FREQ_MAX,
+  .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0),
+  .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(30),
+  .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(30.0/63.0),
+  .base.is_quadrature = true,
+  .base.i_and_q_swapped = true,
+  .base.spectrum_inverted = false,
+  //.base.lo_offset = U2_DOUBLE_TO_FXPT_FREQ(4.25e6),
+  .base.init = xcvr2450_init,
+  .base.set_freq = xcvr2450_set_freq,
+  .base.set_gain = xcvr2450_set_gain_tx,
+  .base.set_tx_enable = xcvr2450_set_tx_enable,
+  .base.atr_mask = 0x00E0, //CHECK this
+  //.base.atr_txval = POWER_UP|MIX_EN, 
+  //.base.atr_rxval = POWER_UP|ANT_SW,
+  // .base.atr_tx_delay =
+  // .base.atr_rx_delay =
+  .common.spi_mask = SPI_SS_TX_DB,
+};
+
+/**************************************************
+ * Registers
+ **************************************************/
+void
+send_reg(struct db_xcvr2450_dummy *db, int v){
+  // Send 24 bits, it keeps last 18 clocked in
+  spi_transact(SPI_TXONLY,db->common.spi_mask,v,24,SPIF_PUSH_FALL);
+  printf("xcvr2450: Setting reg %d to %06X\n", (v&15), v);
+}
+
+void
+set_reg_txgain(struct db_xcvr2450_dummy *db, int txgain){
+  int reg_txgain = (txgain<<4) | 12;
+  send_reg(db, reg_txgain);
+}
+
+void
+set_reg_rxgain(struct db_xcvr2450_dummy *db, int rx_bb_gain, int rx_rf_gain){
+  int reg_rxgain = ( (rx_rf_gain<<9) | (rx_bb_gain<<4) | 11);
+  send_reg(db, reg_rxgain);
+}
+
+/**************************************************
+ * Init for TX and RX
+ **************************************************/
+bool
+xcvr2450_init(struct db_base *dbb){
+  struct db_xcvr2450_dummy *db = (struct db_xcvr2450_dummy *) dbb;
+  // Sane defaults
+  db->common.d_mimo = 1;          // 0 = OFF, 1 = ON
+  db->common.d_int_div = 192;     // 128 = min, 255 = max
+  db->common.d_frac_div = 0;      // 0 = min, 65535 = max
+  db->common.d_highband = 0;      // 0 = freq <= 5.4e9, 1 = freq > 5.4e9
+  db->common.d_five_gig = 0;      // 0 = freq <= 3.e9, 1 = freq > 3e9
+  db->common.d_cp_current = 0;    // 0 = 2mA, 1 = 4mA
+  db->common.d_ref_div = 4;       // 1 to 7
+  db->common.d_rssi_hbw = 0;      // 0 = 2 MHz, 1 = 6 MHz
+  db->common.d_txlpf_bw = 1;      // 1 = 12 MHz, 2 = 18 MHz, 3 = 24 MHz
+  db->common.d_rxlpf_bw = 1;      // 0 = 7.5 MHz, 1 = 9.5 MHz, 2 = 14 MHz, 3 = 18 MHz
+  db->common.d_rxlpf_fine = 2;    // 0 = 90%, 1 = 95%, 2 = 100%, 3 = 105%, 4 = 110%
+  db->common.d_rxvga_ser = 1;     // 0 = RXVGA controlled by B7:1, 1=controlled serially
+  db->common.d_rssi_range = 1;    // 0 = low range (datasheet typo), 1=high range (0.5V - 2.0V) 
+  db->common.d_rssi_mode = 1;     // 0 = enable follows RXHP, 1 = enabled
+  db->common.d_rssi_mux = 0;      // 0 = RSSI, 1 = TEMP
+  db->common.d_rx_hp_pin = 0;     // 0 = Fc set by rx_hpf, 1 = 600 KHz
+  db->common.d_rx_hpf = 0;        // 0 = 100Hz, 1 = 30KHz
+  db->common.d_rx_ant = 0;        // 0 = Ant. #1, 1 = Ant. #2
+  db->common.d_tx_ant = 0;        // 0 = Ant. #1, 1 = Ant. #2
+  db->common.d_txvga_ser = 1;     // 0 = TXVGA controlled by B6:1, 1=controlled serially
+  db->common.d_tx_driver_lin = 2; // 0=50% (worst linearity), 1=63%, 2=78%, 3=100% (best lin)
+  db->common.d_tx_vga_lin = 2;    // 0=50% (worst linearity), 1=63%, 2=78%, 3=100% (best lin)
+  db->common.d_tx_upconv_lin = 2; // 0=50% (worst linearity), 1=63%, 2=78%, 3=100% (best lin)
+  db->common.d_tx_bb_gain = 3;    // 0=maxgain-5dB, 1=max-3dB, 2=max-1.5dB, 3=max
+  db->common.d_pabias_delay = 15; // 0 = 0, 15 = 7uS
+  db->common.d_pabias = 0;        // 0 = 0 uA, 63 = 315uA
+  //db->common.d_rx_rf_gain = 0;    // 0 = 0dB, 1 = 0dB, 2 = 15dB, 3 = 30dB
+  //db->common.d_rx_bb_gain = 16;   // 0 = min, 31 = max (0 - 62 dB)
+
+  //db->common.d_txgain = 63;       // 0 = min, 63 = max
+  
+  /*
+  // Initialize GPIO and ATR
+  tx_write_io(TX_SAFE_IO, TX_OE_MASK);
+  tx_write_oe(TX_OE_MASK, ~0);
+  tx_set_atr_txval(TX_SAFE_IO);
+  tx_set_atr_rxval(TX_SAFE_IO);
+  tx_set_atr_mask(TX_OE_MASK);
+
+  rx_write_io(RX_SAFE_IO, RX_OE_MASK);
+  rx_write_oe(RX_OE_MASK, ~0);
+  rx_set_atr_rxval(RX_SAFE_IO);
+  rx_set_atr_txval(RX_SAFE_IO);
+  rx_set_atr_mask(RX_OE_MASK);
+        
+  // Initialize chipset
+  // TODO: perform reset sequence to ensure power up defaults
+  set_reg_standby();
+  set_reg_bandselpll();
+  set_reg_cal();
+  set_reg_lpf();
+  set_reg_rxrssi_ctrl();
+  set_reg_txlin_gain();
+  set_reg_pabias();
+  set_reg_rxgain();
+  set_reg_txgain();
+  //FIXME: set_freq(2.45e9);
+  */
+  
+  db->base.set_gain(dbb, (db->base.gain_max - db->base.gain_min)/2); //set mid-range gain
+  return true;
+}
+
+bool
+xcvr2450_set_freq(struct db_base *db, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc){
+  return true;
+}
+
+bool
+xcvr2450_set_gain_rx(struct db_base *dbb, u2_fxpt_gain_t gain){
+  struct db_xcvr2450_dummy *db = (struct db_xcvr2450_dummy *) dbb;
+  //ensure gain in within range
+  if(!(gain >= db->base.gain_min && gain <= db->base.gain_max)) {
+    return false;
+  }
+  int rx_rf_gain = 0, rx_bb_gain = 0;
+  // Split the gain between RF and baseband
+  // This is experimental, not prescribed
+  if(gain < U2_DOUBLE_TO_FXPT_GAIN(30.0)) {
+    rx_rf_gain = 0; // 0 dB RF gain
+    rx_bb_gain = gain/U2_DOUBLE_TO_FXPT_GAIN(2.0);
+  }
+  else if(gain >= U2_DOUBLE_TO_FXPT_GAIN(30.0) && gain < U2_DOUBLE_TO_FXPT_GAIN(61.0)) {
+    rx_rf_gain = 2; // 15 dB RF gain
+    rx_bb_gain = (gain-U2_DOUBLE_TO_FXPT_GAIN(15.0))/U2_DOUBLE_TO_FXPT_GAIN(2.0);
+  }
+  else if(gain >= U2_DOUBLE_TO_FXPT_GAIN(61.0)) {
+    rx_rf_gain = 3; // 30.5 dB RF gain
+    rx_bb_gain = (gain-U2_DOUBLE_TO_FXPT_GAIN(30.5))/U2_DOUBLE_TO_FXPT_GAIN(2.0);
+  }
+  set_reg_rxgain(db, rx_bb_gain, rx_rf_gain);
+  return true;
+}
+
+bool
+xcvr2450_set_gain_tx(struct db_base *dbb, u2_fxpt_gain_t gain){
+  struct db_xcvr2450_dummy *db = (struct db_xcvr2450_dummy *) dbb;
+  //ensure gain in within range
+  if(!(gain >= db->base.gain_min && gain <= db->base.gain_max)) {
+    return false;
+  }
+  //scale for register and set
+  int txgain = gain/db->base.gain_step_size;
+  set_reg_txgain(db, txgain);
+  return true;
+}
+
+bool
+xcvr2450_set_tx_enable(struct db_base *db, bool on){
+  return true;
+}