3 files changed, 97 insertions, 0 deletions
diff --git a/Working_Examples/3432/CH4/EX4.6/Ex4_6.sce b/Working_Examples/3432/CH4/EX4.6/Ex4_6.sce
new file mode 100755
index 0000000..e621d8a
--- /dev/null
+++ b/Working_Examples/3432/CH4/EX4.6/Ex4_6.sce
@@ -0,0 +1,97 @@
+//Example 4.6 
+//PID Control of DC Motor Speed.
+
+//------------------------------------------------------------------
+//NOTE THAT--
+
+//The model as given in matlab program for this example in the book is
+
+//num=Ra*s + La*s^2 ;
+//den=Ke*ki + (Ra*Ke*Ke+Ke*kp)*s + (Ra*b+Ke*Ke+Ke*kd)*s^2 + Jm*La*s^3;
+
+//this does not match to the model of DC motor given on page 43. 
+//Also, if we assume this model, disturbance response given 
+//in figure 4.13 (a) 
+//is different from expected.
+//For instance, with P control, output should asymptotically go to 0
+//for disturbance step input, because numerator is s(Ra + La*s) 
+//and system is type 0 (no pole at origin).
+//i.e. y(inf)=lim s->0 s*Y(s)= s*[s(Ra + La*s)/den]*1/s=0;
+
+//In following code, we have considered correct model of DC motor as 
+//given on page 43. Note that, this model must have been used 
+//by authors of the book for 
+//step reference tracking as it is correctly shown in figure 4.13 (b)
+
+//------------------------------------------------------------------
+xdel(winsid())//close all graphics Windows
+clear;
+clc;
+
+//------------------------------------------------------------------
+// System parameters
+Jm=0.0113; // N-m-s^2/rad
+b=0.028;   // N-m-s/rad
+La=0.1;    // henry
+Ra=0.45;   // ohms
+Kt=0.067   // n-m/amp
+Ke=0.067;  // V-sec/amp
+
+// Controller parameters
+kp=3;
+ki=15;    // sec^-1
+kd=0.3;   // sec
+
+// DC Motor Transfer function as given on page 43 of book (edition 5)
+//G=Kt/[Jm*La s^2 + (Jm*Ra + La*b)s +(Ra*b +Kt*Ke)]
+s=%s;
+num=[Kt];
+den=[(Ra*b +Kt*Ke) (Jm*Ra + La*b) Jm*La];
+Ns=poly(num,'s','coeff');
+Ds=poly(den,'s','coeff');
+G=syslin('c',Ns/Ds)
+
+//PID controller, Gc=(kd s^2 + kp s + ki)/s
+num=[ki kp kd;ki kp 0;0 kp 0]; //numerator parameters of controller)
+                                 //(row wise for PID, PI and P)
+den=[0 1];                    //denominator parameters of controller
+Ds=poly(den,'s','coeff');    //denominator polynomial of controller
+t=0:0.005:10;               // Simulation time
+//------------------------------------------------------------------
+//Step disturbance response with P, PI and PID controller. 
+
+for i=1:3
+Ns=poly(num(i,:),'s','coeff');//numerator polynomial of controller
+sysG=syslin('c',Ns/Ds);
+sysD=G/. sysG;
+v(i,:)=csim('step',t,sysD);
+end
+plot(t',v');
+//Title, labels and grid to the figure
+exec .\fig_settings.sci; //custom script to set the figure properties
+title('Responses of P,PI and PID control to step disturbance...
+ input','fontsize',3)
+xlabel('Time t (sec.)','fontsize',2)
+ylabel('Amplitude','fontsize',2)
+hl=legend(['PID','PI','P']);
+
+//------------------------------------------------------------------
+//Reference step response
+
+figure
+for i=1:3
+Ns=poly(num(i,:),'s','coeff');
+Gc=syslin('c',Ns/Ds);
+// Step reference response with P, PI and PID controller.
+sysR=G*Gc/(1+G*Gc);
+v(i,:)=csim('step',t,sysR);
+end
+plot(t',v')
+//Title, labels and grid to the figure
+exec .\fig_settings.sci; //custom script to set the figure properties
+title('Responses of PID control to step reference input','fontsize',3)
+xlabel('Time t (sec.)','fontsize',2)
+ylabel('Amplitude','fontsize',2)
+hl=legend(['PID','PI','P']);
+
+//------------------------------------------------------------------
diff --git a/Working_Examples/3432/CH4/EX4.6/Ex4_6_f0.pdf b/Working_Examples/3432/CH4/EX4.6/Ex4_6_f0.pdf
new file mode 100755
index 0000000..9a65a24
--- /dev/null
+++ b/Working_Examples/3432/CH4/EX4.6/Ex4_6_f0.pdf
diff --git a/Working_Examples/3432/CH4/EX4.6/Ex4_6_f1.pdf b/Working_Examples/3432/CH4/EX4.6/Ex4_6_f1.pdf
new file mode 100755
index 0000000..4aff13b
--- /dev/null
+++ b/Working_Examples/3432/CH4/EX4.6/Ex4_6_f1.pdf