diff options
Diffstat (limited to '2.3-1/src/c/scilab-arduino')
8 files changed, 274 insertions, 3 deletions
diff --git a/2.3-1/src/c/scilab-arduino/cmd_dcmotor_run/u8cmd_dcmotor_runs.c b/2.3-1/src/c/scilab-arduino/cmd_dcmotor_run/u8cmd_dcmotor_runs.c new file mode 100644 index 00000000..93905c94 --- /dev/null +++ b/2.3-1/src/c/scilab-arduino/cmd_dcmotor_run/u8cmd_dcmotor_runs.c @@ -0,0 +1,59 @@ +/* + * Scilab ( http://www.scilab.org/ ) - This file is part of Scilab + * Copyright (C) 2008 - INRIA - Arnaud TORSET + * + * This file must be used under the terms of the CeCILL. + * This source file is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at + * http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt + * + */ + +#include "cmd_dcmotor_run.h" + +uint8 u8cmd_dcmotor_runs(uint8 board_no, uint8 motor_no, int16 duty) +{ + uint8 direction = 1; + if(duty >= 0) + { + direction = 1; + } + else + { + direction = 0; + duty = -duty; + } + + if(duty > 255) duty = 255; + + if (dcm_mode[motor_no] == 3) //L293 + { + if(direction == 1) + { + analogWrite(dcm_pin_1[motor_no],duty); + analogWrite(dcm_pin_2[motor_no],0); + } + else + { + analogWrite(dcm_pin_2[motor_no],duty); + analogWrite(dcm_pin_1[motor_no],0); + } + } + else + { + if(direction == 1) + { + digitalWrite(dcm_pin_1[motor_no],HIGH); + digitalWrite(dcm_pin_2[motor_no],LOW); + } + else + { + digitalWrite(dcm_pin_2[motor_no],HIGH); + digitalWrite(dcm_pin_1[motor_no],LOW); + } + } + + return 0; +} + diff --git a/2.3-1/src/c/scilab-arduino/cmd_dcmotor_setup/u8cmd_dcmotor_setups.c b/2.3-1/src/c/scilab-arduino/cmd_dcmotor_setup/u8cmd_dcmotor_setups.c new file mode 100644 index 00000000..30b4b9b3 --- /dev/null +++ b/2.3-1/src/c/scilab-arduino/cmd_dcmotor_setup/u8cmd_dcmotor_setups.c @@ -0,0 +1,42 @@ +/* + * Scilab ( http://www.scilab.org/ ) - This file is part of Scilab + * Copyright (C) 2008 - INRIA - Arnaud TORSET + * + * This file must be used under the terms of the CeCILL. + * This source file is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at + * http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt + * + */ + +#include "cmd_dcmotor_setup.h" + +uint8 dcm_pin_1[4], dcm_pin_2[4], dcm_mode[4]; + +uint8 u8cmd_dcmotor_setups(uint8 board_no, uint8 driver_type, uint8 motor_no,\ + uint8 pin_1, uint8 pin_2) +{ + dcm_pin_1[motor_no] = pin_1; + dcm_pin_2[motor_no] = pin_2; + dcm_mode[motor_no] = driver_type; + + //Initialise pins + pinMode(pin_1,OUTPUT); + pinMode(pin_2,OUTPUT); + + //Set output to low. + if(driver_type == 3) + { + analogWrite(pin_1,0); + analogWrite(pin_2,0); + } + else + { + digitalWrite(pin_1,LOW); + digitalWrite(pin_2,LOW); + } + + return 0; +} + diff --git a/2.3-1/src/c/scilab-arduino/default_files/Makefile b/2.3-1/src/c/scilab-arduino/default_files/Makefile index 2b888f05..5432fcfd 100644 --- a/2.3-1/src/c/scilab-arduino/default_files/Makefile +++ b/2.3-1/src/c/scilab-arduino/default_files/Makefile @@ -4,7 +4,7 @@ ARDUINO_DIR = /usr/share/arduino ARDMK_DIR = /usr/share/arduino AVR_TOOLS_DIR = /usr BOARD_TAG = uno -USER_LIB_PATH = ../../ -ARDUINO_LIBS = src/c includes interfaces ../Temp +USER_LIB_PATH = ../ +ARDUINO_LIBS = ../src/c ../includes ../interfaces ../ ARDUINO_PORT = /dev/ttyACM0 include /usr/share/arduino/Arduino.mk diff --git a/2.3-1/src/c/scilab-arduino/default_files/sci2c_arduino.ino b/2.3-1/src/c/scilab-arduino/default_files/sci2c_arduino.ino index 9e9d9b6e..2b30456c 100644 --- a/2.3-1/src/c/scilab-arduino/default_files/sci2c_arduino.ino +++ b/2.3-1/src/c/scilab-arduino/default_files/sci2c_arduino.ino @@ -1,11 +1,13 @@ #include "Arduino.h" #include <loop_arduino.h> +#include <setup_arduino.h> void setup() { //Please write appropriate setup functions here. + setup_arduino(); } -int i = 0; + void loop() { loop_arduino(); diff --git a/2.3-1/src/c/scilab-arduino/default_files/setup_arduino.h b/2.3-1/src/c/scilab-arduino/default_files/setup_arduino.h new file mode 100644 index 00000000..9eb0ed4a --- /dev/null +++ b/2.3-1/src/c/scilab-arduino/default_files/setup_arduino.h @@ -0,0 +1,64 @@ +/* +** ************************************************ +** This file has been generated using +** Scilab2C (Version 2.3) +** +** Please visit following links for more informations: +** Atoms Module: http://atoms.scilab.org/toolboxes/scilab2c +** Scilab2C Forge: http://forge.scilab.org/index.php/p/scilab2c/ +** Scilab2C ML: http://forge.scilab.org/index.php/p/scilab2c/ +** ************************************************ +*/ + + +#ifndef setup_arduino_h +#define setup_arduino_h +/* +** ------------------- +** ----- Target ------ +** ------------------- +*/ +# define Arduino1 1 +/* +** ----------------------- +** --- SCI2C Includes. --- +** ----------------------- +*/ +#include "sci2clib.h" +/* +** --------------------------- +** --- End SCI2C Includes. --- +** --------------------------- +*/ + + +#ifdef __cplusplus +extern "C" { +#endif +/* +** ------------------- +** --- Prototypes. --- +** ------------------- +*/ +int setup_arduino(); +/* +** ----------------------- +** --- End Prototypes. --- +** ----------------------- +*/ + + +/* +** ------------------------ +** --- USER2C Includes. --- +** ------------------------ +*/ +/* +** ---------------------------- +** --- End USER2C Includes. --- +** ---------------------------- +*/ +#ifdef __cplusplus +} /* extern "C" */ +#endif +#endif diff --git a/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_run.h b/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_run.h new file mode 100644 index 00000000..7631761b --- /dev/null +++ b/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_run.h @@ -0,0 +1,32 @@ +/* + * Scilab ( http://www.scilab.org/ ) - This file is part of Scilab + * Copyright (C) 2008 - INRIA - Arnaud TORSET + * + * This file must be used under the terms of the CeCILL. + * This source file is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at + * http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt + * + */ + + +#ifndef __CMD_DCMOTOR_RUN_H__ +#define __CMD_DCMOTOR_RUN_H__ + +#include "types.h" +#include "Arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +extern uint8 dcm_pin_1[4], dcm_pin_2[4], dcm_mode[4]; + +uint8 u8cmd_dc_motor_runs(uint8 board_no, uint8 motor_no, int16 duty); + +#ifdef __cplusplus +} /* extern "C" */ +#endif + +#endif /* __CMD_DCMOTOR_SETUP_H__ */ diff --git a/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_setup.h b/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_setup.h new file mode 100644 index 00000000..94f5a161 --- /dev/null +++ b/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_setup.h @@ -0,0 +1,33 @@ +/* + * Scilab ( http://www.scilab.org/ ) - This file is part of Scilab + * Copyright (C) 2008 - INRIA - Arnaud TORSET + * + * This file must be used under the terms of the CeCILL. + * This source file is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at + * http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt + * + */ + + +#ifndef __CMD_DCMOTOR_SETUP_H__ +#define __CMD_DCMOTOR_SETUP_H__ + +#include "types.h" +#include "Arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +extern uint8 dcm_pin_1[4], dcm_pin_2[4], dcm_mode[4]; + +uint8 u8cmd_dc_motor_setups(uint8 board_no, uint8 driver_type, uint8 motor_no,\ + uint8 pin_1, uint8 pin_2); + +#ifdef __cplusplus +} /* extern "C" */ +#endif + +#endif /* __CMD_DCMOTOR_SETUP_H__ */ diff --git a/2.3-1/src/c/scilab-arduino/interfaces/int_cmd_dcmotor.h b/2.3-1/src/c/scilab-arduino/interfaces/int_cmd_dcmotor.h new file mode 100644 index 00000000..b35583d7 --- /dev/null +++ b/2.3-1/src/c/scilab-arduino/interfaces/int_cmd_dcmotor.h @@ -0,0 +1,39 @@ +/* + * Scilab ( http://www.scilab.org/ ) - This file is part of Scilab + * Copyright (C) 2008 - INRIA - Arnaud TORSET + * + * This file must be used under the terms of the CeCILL. + * This source file is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at + * http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt + * + */ + + +#ifndef __INT_CMD_DCMOTOR_H__ +#define __INT_CMD_DCMOTOR_H__ + +#include "types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define d0d0d0d0d0cmd_dcmotor_setupu80(in1,in2,in3,in4,in5)\ + u8cmd_dcmotor_setups((uint8)in1,(uint8)in2,(uint8)in3,\ + (uint8)in4,(uint8)in5) + +#define d0d0d0cmd_dcmotor_runu80(in1,in2,in3) u8cmd_dcmotor_runs((uint8)in1,\ + (uint8)in2, (int16)in3); + + +#define d0d0u160cmd_dcmotor_runu80(in1,in2,in3) u8cmd_dcmotor_runs((uint8)in1,\ + (uint8)in2, (int16)in3); + + +#ifdef __cplusplus +} /* extern "C" */ +#endif + +#endif /* __INT_CMD_DCMOTOR_H__ */ |