diff options
Diffstat (limited to '2.3-1/src/c/scilab-arduino/includes')
10 files changed, 2 insertions, 167 deletions
diff --git a/2.3-1/src/c/scilab-arduino/includes/cmd_analog_in_volt.h b/2.3-1/src/c/scilab-arduino/includes/cmd_analog_in_volt.h deleted file mode 100644 index ec471426..00000000 --- a/2.3-1/src/c/scilab-arduino/includes/cmd_analog_in_volt.h +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright (C) 2017 - IIT Bombay - FOSSEE - - This file must be used under the terms of the CeCILL. - This source file is licensed as described in the file COPYING, which - you should have received as part of this distribution. The terms - are also available at - http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt - Author: Yash Pratap Singh Tomar - Organization: FOSSEE, IIT Bombay - Email: toolbox@scilab.in -*/ - -#ifndef __CMD_ANALOG_IN_VOLT_H__ -#define __CMD_ANALOG_IN_VOLT_H__ - -#include "types.h" - -#ifdef __cplusplus -extern "C" { -#endif - -float u8cmd_analog_in_volts(uint8 board_no, uint8 pin); - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* __CMD_ANALOG_IN_VOLT_H__ */ diff --git a/2.3-1/src/c/scilab-arduino/includes/cmd_analog_out_volt.h b/2.3-1/src/c/scilab-arduino/includes/cmd_analog_out_volt.h deleted file mode 100644 index 51580fbb..00000000 --- a/2.3-1/src/c/scilab-arduino/includes/cmd_analog_out_volt.h +++ /dev/null @@ -1,27 +0,0 @@ -/* Copyright (C) 2017 - IIT Bombay - FOSSEE - - This file must be used under the terms of the CeCILL. - This source file is licensed as described in the file COPYING, which - you should have received as part of this distribution. The terms - are also available at - http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt - Author: Yash Pratap Singh Tomar - Organization: FOSSEE, IIT Bombay - Email: toolbox@scilab.in -*/ - -#ifndef __CMD_ANALOG_OUT_VOLT_H__ -#define __CMD_ANALOG_OUT_VOLT_H__ - -#include "types.h" -#ifdef __cplusplus -extern "C" { -#endif - -void u8cmd_analog_out_volts(uint8 board_no, uint8 pin, float value); - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* __CMD_ANALOG_OUT_VOLT_H__ */ diff --git a/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_release.h b/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_release.h deleted file mode 100644 index d185fb5e..00000000 --- a/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_release.h +++ /dev/null @@ -1,30 +0,0 @@ -/* Copyright (C) 2017 - IIT Bombay - FOSSEE - - This file must be used under the terms of the CeCILL. - This source file is licensed as described in the file COPYING, which - you should have received as part of this distribution. The terms - are also available at - http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt - Author: Yash Pratap Singh Tomar - Organization: FOSSEE, IIT Bombay - Email: toolbox@scilab.in -*/ - -#ifndef __CMD_DCMOTOR_RELEASE_H__ -#define __CMD_DCMOTOR_RELEASE_H__ - -#include "types.h" - -#ifdef __cplusplus -extern "C" { -#endif - -extern uint8 dcm_pin_1[4], dcm_pin_2[4], dcm_mode[4]; - -void u8cmd_dcmotor_releases(uint8 board_no, uint8 motor_no); - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* __CMD_DCMOTOR_RELEASE_H__ */ diff --git a/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_run.h b/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_run.h index 1b5d41c1..2b69c99b 100644 --- a/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_run.h +++ b/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_run.h @@ -22,7 +22,7 @@ extern "C" { extern uint8 dcm_pin_1[4], dcm_pin_2[4], dcm_mode[4]; -void u8cmd_dcmotor_runs(uint8 board_no, uint8 motor_no, int16 duty); +void u8cmd_dc_motor_runs(uint8 board_no, uint8 motor_no, int16 duty); #ifdef __cplusplus } /* extern "C" */ diff --git a/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_setup.h b/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_setup.h index 45854ffb..cecd4659 100644 --- a/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_setup.h +++ b/2.3-1/src/c/scilab-arduino/includes/cmd_dcmotor_setup.h @@ -22,7 +22,7 @@ extern "C" { extern uint8 dcm_pin_1[4], dcm_pin_2[4], dcm_mode[4]; -void u8cmd_dcmotor_setups(uint8 board_no, uint8 driver_type, uint8 motor_no,\ +void u8cmd_dc_motor_setups(uint8 board_no, uint8 driver_type, uint8 motor_no,\ uint8 pin_1, uint8 pin_2); #ifdef __cplusplus diff --git a/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_dev.h b/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_dev.h deleted file mode 100644 index 861a8e7b..00000000 --- a/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_dev.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __CMD_I2C_DEV_H__ -#define __CMD_I2C_DEV_H__ - -#include "types.h" - -#ifdef __cplusplus -extern "C" { -#endif - -uint8 u8cmd_i2c_devs(uint8 address); - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* __CMD_I2C_DEV_H__ */ diff --git a/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_read.h b/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_read.h deleted file mode 100644 index 791bdd38..00000000 --- a/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_read.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __CMD_I2C_READ_H__ -#define __CMD_I2C_READ_H__ - -#include "types.h" - -#ifdef __cplusplus -extern "C" { -#endif - -float u8cmd_i2c_reads(uint8 address, uint8 bytes); - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* __CMD_I2C_READ_H__ */ diff --git a/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_read_register.h b/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_read_register.h deleted file mode 100644 index ea203adf..00000000 --- a/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_read_register.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __CMD_I2C_READ_REGISTER_H__ -#define __CMD_I2C_READ_REGISTER_H__ - -#include "types.h" - -#ifdef __cplusplus -extern "C" { -#endif - -uint16 u8cmd_i2c_read_registers(uint8 address, uint8 reg_adrs); - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* __CMD_I2C_READ_REGISTER_H__ */ diff --git a/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_write.h b/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_write.h deleted file mode 100644 index 6a57222b..00000000 --- a/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_write.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __CMD_I2C_WRITE_H__ -#define __CMD_I2C_WRITE_H__ - -#include "types.h" - -#ifdef __cplusplus -extern "C" { -#endif - -void u8cmd_i2c_writes(uint8 address, uint8 data); - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* __CMD_I2C_WRITE_H__ */ diff --git a/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_write_register.h b/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_write_register.h deleted file mode 100644 index ff1b9ec0..00000000 --- a/2.3-1/src/c/scilab-arduino/includes/cmd_i2c_write_register.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __CMD_I2C_WRITE_REGISTER_H__ -#define __CMD_I2C_WRITE_REGISTER_H__ - -#include "types.h" - -#ifdef __cplusplus -extern "C" { -#endif - -void u8cmd_i2c_write_registers(uint8 address, uint8 reg_adrs, uint8 data); - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* __CMD_I2C_WRITE_REGISTER_H__ */ |