diff options
Diffstat (limited to '2.3-1/macros/Hardware/RasberryPi/RPI_PinISR.sci')
| -rw-r--r-- | 2.3-1/macros/Hardware/RasberryPi/RPI_PinISR.sci | 56 |
1 files changed, 0 insertions, 56 deletions
diff --git a/2.3-1/macros/Hardware/RasberryPi/RPI_PinISR.sci b/2.3-1/macros/Hardware/RasberryPi/RPI_PinISR.sci deleted file mode 100644 index c2354c1f..00000000 --- a/2.3-1/macros/Hardware/RasberryPi/RPI_PinISR.sci +++ /dev/null @@ -1,56 +0,0 @@ -// This file must be used under the terms of the CeCILL. -// This source file is licensed as described in the file COPYING, which -// you should have received as part of this distribution. The terms -// are also available at -// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt -// Organization: FOSSEE, IIT Bombay -// Email: toolbox@scilab.in - -function RPI_PinISR(pin, edgetype, fn) -// Function to assign a function to be run when an interrupt occurs on -// specified pin. -// -// Calling Sequence -// RPI_PinISR(pin, edgetype, fn) -// -// Parameters -// pin : pin whose interrupt is to be configured -// edgetype: edge on which interrupt is to be monitored -// 1 -> Falling egde -// 2 -> Rising egde -// 3 -> Both egde -// fn: name of the function to be executed on interrupt occurance -// Description -// This functions monitors interrupt on specified pin for specified edge, -// When that interrupt occurs, function specified by 'fn' is executed. -// Examples -// RPI_PinISR(12, 0, Pin12ISR) //executes 'Pin12ISR' on falling edge on -// pin 12 -// See also -// RPI_ThreadCreate RPI_DigitalSetup -// -// -// Authors -// Siddhesh Wani -// ----------------------------------------------------------------- - -// This is curretly dummy function. It provides no functionality but is required -// for providing support for generating C code for RPi. - -//Pins of header P1 which can be used as GPIO -supported_pins = [3,5,7,8,10,11,12,13,15,16,18,19,21,22,23,24,26,27,28,29,... - 31,31,33,35,36,37,38,40]; - -PinIsGPIO = members(pin, supported_pins); //Check if input pin supports GPIO - -//If given pin does not support GPIO functionality, raise the error -if(PinIsGPIO == 0) - error(9999, 'SCI2CERROR: Given pin number doesnot support GPIO functionality.'); -end -EdgeTypeSupported = members(edgetype,[1 2 3]); - -if(EdgeTypeSupported == 0) - error(9999, 'SCI2CERROR: Given edgetype is incorrect. Please specify correct edgetype from [1,2,3]') -end - -endfunction |