diff options
Diffstat (limited to '2.3-1/macros/Hardware/RasberryPi/Misc/RPI_sn3218Setup.sci')
| -rwxr-xr-x | 2.3-1/macros/Hardware/RasberryPi/Misc/RPI_sn3218Setup.sci | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/2.3-1/macros/Hardware/RasberryPi/Misc/RPI_sn3218Setup.sci b/2.3-1/macros/Hardware/RasberryPi/Misc/RPI_sn3218Setup.sci new file mode 100755 index 00000000..0791c506 --- /dev/null +++ b/2.3-1/macros/Hardware/RasberryPi/Misc/RPI_sn3218Setup.sci @@ -0,0 +1,40 @@ +// Copyright (C) 2017 - IIT Bombay - FOSSEE +// +// This file must be used under the terms of the CeCILL. +// This source file is licensed as described in the file COPYING, which +// you should have received as part of this distribution. The terms +// are also available at +// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt +// Organization: FOSSEE, IIT Bombay +// Email: toolbox@scilab.in + +function RPI_sn3218Setup(pinBase) +// Function for setting up SN3218 I2C based LED controller. +// +// Calling Sequence +// RPI_sn3218Setup(pinBase) +// +// Parameters +// pinBase: any number above 64. The consecutive 18 pins will be allocated alongwith. +// +// Description +// This function sets up the extension module for the SN3218 I2C based LED controller.There is no I2C device address passed into the setup function – the SN3218 has a fixed I2C address of 0x54, so there’s no need to refer to it other than internally inside the driver. This also means that only one device can be connected to a Raspberry Pi. +// +// Examples +// RPI_sn3218Setup(67) +// See also +// RPI_sr595Setup, RPI_pcf8574Setup, RPI_pcf8591Setup, RPI_mcp23008Setup, RPI_mcp23016Setup, RPI_mcp23017Setup, RPI_mcp23s08Setup, RPI_mcp23s17Setup +// +// Authors +// Jorawar Singh +// +// Bibliography +// http://wiringpi.com/reference/ + + commande="sn3#1#"+string(pinBase)+"#"; + if getos=="Linux" then + unix_w("python -c ""import socket;s=socket.socket();s.connect((''"+RPI_piAdress+"'',9077));s.send(''"+commande+"'');print(s.recv(1024));s.close()"""); + elseif getos=="Windows" then + RPI_winR=dos("python -c ""import socket;s=socket.socket();s.connect((''"+RPI_piAdress+"'',9077));s.send(''"+commande+"'');print(s.recv(1024));s.close()"""); + end +endfunction |