1 files changed, 46 insertions, 0 deletions
diff --git a/2.3-1/macros/Hardware/RasberryPi/Digital/RPI_digitalWrite.sci b/2.3-1/macros/Hardware/RasberryPi/Digital/RPI_digitalWrite.sci
new file mode 100755
index 00000000..d4ac660b
--- /dev/null
+++ b/2.3-1/macros/Hardware/RasberryPi/Digital/RPI_digitalWrite.sci
@@ -0,0 +1,46 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function RPI_digitalWrite(pin,Volt)
+// Function to set digital voltage at the given pin
+//
+// Calling Sequence
+//  RPI_digitalWrite(pin,Volt)
+//
+// Parameters
+//  pin : The pin number to set the voltage at. Numbering sequence to be followed as initiated using RPI_pinNumbering function.
+//  Volt: Digital voltage to set. 0 (for logic-LOW) or 1 (for logic-HIGH)
+//
+// Description
+//  This funtion sets the voltage at the given pin. 0v for logic 0 and 3.3v for logic 1.
+//  Note: pin should be set for output mode using RPI_pinMode.
+//
+// Examples
+//  RPI_digitalWrite(0,1)
+// See also
+//  RPI_analogWrite, RPI_digitalRead, RPI_digitalRead, RPI_pinNumbering, RPI_pinMode
+//
+// Authors
+//  Jorawar Singh
+//
+// Bibliography
+//  http://wiringpi.com/reference/
+
+    if (Volt==0 | Volt==1) then
+        commande="diW#2#"+string(pin)+"#"+string(Volt)+"#";
+    else
+        error("Voltage logic should be 0 or 1.");
+    end
+    if getos=="Linux" then
+        unix_w("python -c ""import socket;s=socket.socket();s.connect((''"+RPI_piAdress+"'',9077));s.send(''"+commande+"'');print(s.recv(1024));s.close()""");
+    elseif getos=="Windows" then
+        RPI_winR=dos("python -c ""import socket;s=socket.socket();s.connect((''"+RPI_piAdress+"'',9077));s.send(''"+commande+"'');print(s.recv(1024));s.close()""");
+    end
+endfunction