sci2c arduino updated

25 files changed, 1014 insertions, 0 deletions

diff --git a/2.3-1/macros/Hardware/AVR/AVRADCSetup.sci b/2.3-1/macros/Hardware/AVR/AVRADCSetup.sci
new file mode 100644
index 00000000..264062bc
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRADCSetup.sci
@@ -0,0 +1,47 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRADCSetup(prescaler,adc_ref)
+// Function to initialise ADC of AVR
+//
+// Calling Sequence
+//     AVRADCSetup(uint8 prescaler, uint8 adc_ref)
+//
+// Parameters
+//     prescaler: prescaler to be used for generating ADC clock (0-7)
+//     adc_ref	: reference voltage to be used for ADC conversion
+//              0 -> Voltage on VREF pin
+//              1 -> Voltage on AVCC pin
+//              2 -> Internal 2.56 reference voltage       
+//
+// Description
+//     This function initialises ADc of AVR with given parameters. 'prescaler' is 
+//     needed for deciding ADC clock. ADC clock should be between 50KHz and 200KHz
+//     and it given as (MCU clock/2^prescaler). Select appropriate prescaler depending
+//     on MCU clock. 'adc_ref' selects one of the available reference voltage sources
+//     available
+// Examples
+//     AVRADCSetup(128,0)
+// See also
+//     AVRReadADC
+//
+// Authors
+//     Siddhesh Wani Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.
+
+if(prescaler>=8)
+disp("Error : Invalid input argument ''prescaler'' in AVRADCSetup function.");
+end
+if(adc_ref>=3) then 
+disp("Error : Invalid input argument ''adc_ref'' in AVRADCSetup function.");
+end
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRDigitalIn.sci b/2.3-1/macros/Hardware/AVR/AVRDigitalIn.sci
new file mode 100644
index 00000000..54eb327b
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRDigitalIn.sci
@@ -0,0 +1,50 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+
+function state = AVRDigitalIn(port,pin)
+// Function to get state (high\low) of a digital input pin on AVR
+//
+// Calling Sequence
+//     state=AVRDigitalIn(port,pin)
+//
+// Parameters
+//     port : port of microcontroller to be used
+//     pin : pin of port (mentioned above) to be used
+//   Returns  
+//     state : state of an input pin (HIGH\LOW)
+//
+// Description
+//     Each AVR microcontroller has pins which can be configured as digital
+//     inputs. These are normally divided among some 'ports' (group of pins).
+//     User has to select one of these port and which pin of that port as 
+//     digital input.      
+//
+// Examples
+//     pinA0 = AVRDigitalIn(1,0)   //To read state on pin 0 of port A
+//
+// See also
+//     AVRDigitalOut AVRDigitalSetup
+//
+//
+// Authors
+//     Siddhesh Wani Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.
+
+if((port==0)|(port>=5)) then 
+disp("Error : Inavalid input argument ''port'' in AVRDigitalIn function.");
+end
+if(pin>=8) then 
+disp("Error : Inavalid input argument ''pin'' in AVRDigitalIn function.");
+end
+state = 0;
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRDigitalOut.sci b/2.3-1/macros/Hardware/AVR/AVRDigitalOut.sci
new file mode 100644
index 00000000..a86a5aa9
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRDigitalOut.sci
@@ -0,0 +1,51 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRDigitalOut(port,pin,state)
+// Function to change state (high\low) of a digital output pin on AVR
+//
+// Calling Sequence
+//     AVRDigitalOut(port,pin,state)
+//
+// Parameters
+//     port : port of microcontroller to be used
+//     pin : pin of port (mentioned above) to be used
+//     state : state to be outputed on pin (HIGH\LOW)
+//
+// Description
+//     Each AVR microcontroller has pins which can be configured as digital
+//     outputs. These are normally divided among some 'ports' (group of pins).
+//     User has to select one of these port and which pin of that port as 
+//     digital output. Also, desired output state must be specified as 
+//     'HIGH' or 'LOW'.     
+//
+// Examples
+//     AVRDigitalOut('A',0,HIGH)
+//
+// See also
+//     AVRDigitalIn
+//
+//
+// Authors
+//     Siddhesh Wani Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.
+
+if((port==0)|(port>=8)) then 
+disp("Error : Inavalid input argument ''port'' in AVRDigitalOut function.");
+end
+if(pin>=8) then 
+disp("Error : Invalid input argument ''pin'' in AVRDigitalOut function.");
+end
+if(state>=2) then 
+disp("Error : Invalid input argument ''state'' in AVRDigitalOut function.");
+end
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRDigitalPortSetup.sci b/2.3-1/macros/Hardware/AVR/AVRDigitalPortSetup.sci
new file mode 100644
index 00000000..5f0b9671
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRDigitalPortSetup.sci
@@ -0,0 +1,47 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRDigitalPortSetup(port,direction)
+// Function to decide direction of port on AVR
+//
+// Calling Sequence
+//     AVRDigitalPortSetup(port,direction)
+//
+// Parameters
+//     port : port of microcontroller to be used(1 for PORTA, 2 for PORTB,...)
+//     direction : direction to be set for pin (0 for INPUT, 1 for OUTPUT)
+//
+// Description
+//     Each AVR microcontroller has pins which can be configured as digital
+//     outputs/inputs. These are normally divided among some 'ports' (group of pins).
+//     User has to select one of these port and which pin of that port to be 
+//     used as digital output/input. Also, desired direction must be specified as 
+//     'INPUT' or 'OUTPUT'.     
+//
+// Examples
+//     AVRDigitalPortSetup(1,0); //This function will make PortA as input port
+//
+// See also
+//     AVRDigitalIn AVRDigitalOut
+//
+//
+// Authors
+//     Siddhesh Wani Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.
+
+if((port==0)|(port>=5)) then 
+disp("Error : Invalid input argument ''port'' in AVRDigitalPortSetup function.");
+end
+if(direction>=2) then 
+disp("Error : Invalid input argument ''direction'' in AVRDigitalPortSetup function.");
+end
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRDigitalSetup.sci b/2.3-1/macros/Hardware/AVR/AVRDigitalSetup.sci
new file mode 100644
index 00000000..e707d4fa
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRDigitalSetup.sci
@@ -0,0 +1,51 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRDigitalSetup(port,pin,direction)
+// Function to decide direction of a digital pin on AVR
+//
+// Calling Sequence
+//     AVRDigitalSetup(port,pin,direction)
+// 
+// Parameters
+//     port : port of microcontroller to be used
+//     pin : pin of port (mentioned above) to be used
+//     direction : direction to be set for pin (INPUT\OUTPUT)
+//
+// Description
+//     Each AVR microcontroller has pins which can be configured as digital
+//     outputs/inputs. These are normally divided among some 'ports' (group of pins).
+//     User has to select one of these port and which pin of that port to be 
+//     used as digital output/input. Also, desired direction must be specified as 
+//     'INPUT' or 'OUTPUT'.     
+//
+// Examples
+//     AVRDigitalSetup('A',0,OUTPUT)
+//
+// See also
+//     AVRDigitalIn AVRDigitalOut
+//
+//
+// Authors
+//     Siddhesh Wani Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.
+
+if((port==0)|(port>=5)) then 
+disp("Error : Invalid input argument ''port'' in AVRDigitalSetup function.");
+end
+if(pin>=8) then 
+disp("Error : Invalid input argument ''pin'' in AVRDigitalSetup function.");
+end
+if(direction>=2) then 
+disp("Error : Invalid input argument ''direction'' in AVRDigitalSetup function.");
+end
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRGetTimerValue.sci b/2.3-1/macros/Hardware/AVR/AVRGetTimerValue.sci
new file mode 100644
index 00000000..afb47ac8
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRGetTimerValue.sci
@@ -0,0 +1,40 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function count = AVRGetTimerValue(timer)
+// Function to get timer count
+//
+// Parameters
+//     timer : timer whose current count is to be returned 
+//             0 for timer0
+//             1 for timer1
+//             2 for timer2
+//              
+// Description
+//     This function returns the count value of a desired timer.By knowing the count value 
+//     certain interrupt action can be taken.
+//
+// Examples
+//     AVRGetTimerValue(0);   //returns present count of the TCNT0 counter
+//
+// See also
+//     AVRTimerSetup
+//
+// Authors
+//     Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.
+
+if(timer>=3) then 
+disp("Error : Invalid input argument ''timer'' in AVRGetTimerValue function.");
+end
+count = 0; 
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRPWM0SetDuty.sci b/2.3-1/macros/Hardware/AVR/AVRPWM0SetDuty.sci
new file mode 100644
index 00000000..604d2f40
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRPWM0SetDuty.sci
@@ -0,0 +1,35 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRPWM0SetDuty(duty)
+//Function to Set Duty cycle of PWM Output generated by Timer0 at OC0 pin.    
+//Parameters
+//	duty : It holds an integer value from 0 to 100 which sets the percentage
+//             of time for which signal is active.
+//Description
+//      Each Micro controller has PWM output pins which can generate varying voltage
+//      from 0V-5V.In this function by varying the duty cycle, varying voltage can be 
+//      produced.
+//Example
+//      AVRPWM0SetDuty(50); //Produces 2.5V at OC0 pin
+//      AVRPWM0SetDuty(0); //Produces 0V at OC0 pin
+//See also
+//     AVRPWM0Setup
+//
+//Authors
+//     Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.
+
+if(duty>100) then 
+disp("Error : Invalid input argument ''duty'' in AVRPWM0SetDuty function.");
+end
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRPWM0Setup.sci b/2.3-1/macros/Hardware/AVR/AVRPWM0Setup.sci
new file mode 100644
index 00000000..39861c86
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRPWM0Setup.sci
@@ -0,0 +1,68 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRPWM0Setup(waveform_mode,output_mode)
+//Function to Setup OC0 pin for required PWM mode
+//Description
+//	Every Micro controller has PWM pins which can generate varying voltages
+//	from 0V-5V.This function helps to use OC0 pin to produce required 
+//	output waveform by setting the waveform mode and otput mode.
+//
+//Parameters
+//	waveform_mode:
+//                   0 for Phase correct PWM Mode
+//                   1 for Fast PWM Mode 
+//                   2 for CTC Mode
+//      output_mode:
+//            For Phase Correct PWM Mode:
+//                   0 for Clear OC0 on compare match when up-counting. Set OC0 on compare
+//                   match when down-counting.
+//                   1 for Set OC0 on compare match when up-counting. Clear OC0 on compare
+//                   match when down-counting.
+// 
+//            For Fast PWM Mode:
+//                   0 for non-inverted output i.e Clear OC0 on compare match, set OC0 at BOTTOM.
+//                   1 for inverted output i.e Set OC0 on compare match, clear OC0 at BOTTOM.
+//        
+//            For CTC Mode:
+//                   0 to Clear OC0 on compare match
+//                   1 to Set OC0 on compare match
+//                   2 to toggle OC0 on compare match
+//    
+//Example
+//    AVRPWM0Setup(2,0);     //This function will select CTC waveform mode and will clear OC0 on    
+//                           compare match 
+//See also
+//     AVRPWM0SetDuty
+//
+//Authors
+//     Ashish Kamble
+//
+//This is curretly dummy function. It provides no functionality but is required 
+//for providing support for generating C code for AVR.
+
+if(waveform_mode>=3) then 
+disp("Error : Invalid input argument ''waveform_mode'' in AVRPWM0Setup function.");
+end
+ 
+if((waveform_mode==0)|(waveform_mode==1)) then
+ if(output_mode>=2) then 
+ disp("Error : Invalid input argument ''output_mode'' in AVRPWM0Setup function.");
+ end
+end
+
+
+if(waveform_mode==2) then
+ if(output_mode>=3) then 
+ disp("Error : Invalid input argument ''output_mode'' in AVRPWM0Setup function.");
+ end
+end
+
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRPWM1SetDuty.sci b/2.3-1/macros/Hardware/AVR/AVRPWM1SetDuty.sci
new file mode 100644
index 00000000..60dc0a9f
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRPWM1SetDuty.sci
@@ -0,0 +1,52 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRPWM1SetDuty(output_pin,duty,Top_Value)
+//Function to Set Duty cycle of PWM Output generated by Timer1 at OC1A or OC1B pin.    
+//Parameters
+//      ouput_pin: 
+//                   0 for selecting OC1A as output pin 
+//                   1 for selecting OC1B as output pin
+//
+//      duty:        It holds an integer value from 0 to 100 which sets the percentage
+//                   of time for which signal is active.
+//
+//      Top_Value:   It holds an integer value from 0 to 65535.This value sets the Top 
+//                   value of the counter TCNT1 i.e ICR.(for more info refer datasheet)
+//
+//Description
+//      Each Micro controller has PWM output pins which can generate varying voltage
+//      from 0V-5V.This function Sets the duty cycle of output PWM signal.Also this function 
+//      decides the Top Vale of TCNT1 and the output pin to output PWM signal.
+//
+//Example
+//      AVRPWM1SetDuty(0,50,40000); //This function will produce PWM signal of 50% duty
+//                                    cycle on OC1A pin and TCNT1 will reset at 40000 instead 
+//                                    at 65535.
+//      
+//See also
+//     AVRPWM1Setup
+//
+//Authors
+//     Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.
+
+if(output_pin>=2) then
+disp("Error : Invalid input argument ''output_pin'' in AVRPWM1SetDuty function.");
+end
+if(duty>100) then 
+disp("Error : Invalid input argument ''duty'' in AVRPWM1SetDuty function.");
+end
+if(Top_Value>65535) then
+disp("Error : Invalid input argument ''Top_Value'' in AVRPWM1Setduty function.");
+end
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRPWM1Setup.sci b/2.3-1/macros/Hardware/AVR/AVRPWM1Setup.sci
new file mode 100644
index 00000000..51aa25b1
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRPWM1Setup.sci
@@ -0,0 +1,79 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRPWM1Setup(waveform_mode,output_mode,output_pin)
+//Function to Setup OC1A or OC1B pin for required PWM mode
+//Description
+//	Every Micro controller has PWM pins which can generate varying voltages
+//	from 0V-5V.This function helps to use OC1A or OC1B pin to produces required 
+//	output waveform by setting the waveform mode and otput mode.
+//
+//Parameters
+//	waveform_mode:
+//                   0 for Phase correct PWM Mode
+//                   1 for Fast PWM Mode 
+//                   2 for CTC Mode
+//
+//	output_mode:
+//            For Phase Correct PWM Mode:
+//                   0 for Clear OC1A or OC1B on compare match when up-counting. Set OC1A or OC1B
+//                   on compare match when down-counting.                   
+//                   1 for Set OC1A or OC1B on compare match when up-counting. Clear OC1A or OC1B 
+//                   on compare match when down-counting.                   
+// 
+//            For Fast PWM Mode:
+//                   0 for non-inverted output i.e Clear OC1A or OC1B on compare match, set  OC1A
+//                   OC1B at BOTTOM.    
+//                   1 for inverted output i.e Set OC1A or OC1B on compare match, clear OC1A or OC1B
+//                   at BOTTOM. 
+//        
+//            For CTC Mode:
+//                   0 to Clear OC1A or OC1B on compare match
+//                   1 to Set OC1A or OC1B on compare match
+//                   2 to toggle OC1A or OC1B on compare match
+//
+//      output_pin: 
+//                   0 for selecting OC1A as output pin 
+//                   1 for selecting OC1B as output pin
+//
+//Example
+//    AVRPWM1Setup(2,0,0);  //This function will select CTC mode and will clear OC1A or OC1B 
+//                            on compare match.Also as defined the output will be produced at 
+//                            0C1A pin.
+//See also
+//     AVRPWM1SetDuty
+//
+//Authors
+//     Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.
+
+if(waveform_mode>=3) then 
+disp("Error : Invalid input argument ''waveform_mode'' in AVRPWM1Setup function.");
+end
+if(waveform_mode==0|waveform_mode==1) then
+{
+ //if((type(output_mode)~=8)|(output_mode>=2)) then
+ //disp("Error : Invalid input argument ''output_mode'' in AVRPWM1Setup function.");
+ //end 
+}
+end
+if(waveform_mode==2) then
+{
+ if((type(output_mode)~=8)|(output_mode>=3)) then
+ disp("Error : Invalid input argument ''output_mode'' in AVRPWM1Setup function.");
+ end
+}
+end
+if(output_pin>=2) then 
+disp("Error : Invalid input argument ''output_pin'' in AVRPWM1Setup function.");
+end
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRPWM2SetDuty.sci b/2.3-1/macros/Hardware/AVR/AVRPWM2SetDuty.sci
new file mode 100644
index 00000000..929c1a0a
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRPWM2SetDuty.sci
@@ -0,0 +1,38 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRPWM2SetDuty(duty)
+//Function to Set Duty cycle of PWM Output generated by Timer2 at OC2 pin.    
+//Description
+//      Each Micro controller has PWM output pins which can generate varying voltage
+//      from 0V-5V.In this function by varying the duty cycle, varying voltage can be 
+//      produced.
+//
+//Parameters
+//	duty : It holds an integer value from 0 to 100 which sets the percentage
+//             of time for which signal is active.
+//
+//Example
+//      AVRPWM2SetDuty(50); //Produces 2.5V at OC2 pin
+//      AVRPWM2SetDuty(0); //Produces 0V at OC2 pin
+//
+//See also
+//      AVRPWM2Setup
+//
+//Authors
+//      Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.    
+
+if(duty>100) then 
+disp("Error : Invalid input argument ''duty'' in AVRPWM2SetDuty function.");
+end
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRPWM2Setup.sci b/2.3-1/macros/Hardware/AVR/AVRPWM2Setup.sci
new file mode 100644
index 00000000..d4bc74a6
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRPWM2Setup.sci
@@ -0,0 +1,69 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRPWM2Setup(waveform_mode,output_mode)
+//Function to Setup OC2 pin for required PWM mode
+//Description
+//	Every Micro controller has PWM pins which can generate varying voltages
+//	from 0V-5V.This function helps to use OC2 pin to produces required 
+//	output waveform by setting the waveform mode and otput mode.
+//
+//Parameters
+//	waveform_mode:
+//                   0 for Phase correct PWM Mode
+//                   1 for Fast PWM Mode 
+//                   2 for CTC Mode
+//output_mode:
+//      For Phase Correct PWM Mode:
+//                   0 for Clear OC2 on compare match when up-counting. Set OC2 on compare
+//                   match when down-counting.
+//                   1 for Set OC2 on compare match when up-counting. Clear OC2 on compare
+//                   match when down-counting.
+// 
+//      For Fast PWM Mode:
+//                   0 for non-inverted output i.e Clear OC2 on compare match, set OC2 at BOTTOM.
+//                   1 for inverted output i.e Set OC2 on compare match, clear OC2 at BOTTOM.
+//        
+//      For CTC Mode:
+//                   0 to Clear OC2 on compare match
+//                   1 to Set OC2 on compare match
+//                   2 to toggle OC2 on compare match
+//    
+//Example
+//    AVRPWM2Setup(2,0);     //This function will select CTC waveform mode and will clear OC2 on    
+//                           compare match 
+//See also
+//     AVRPWM2SetDuty
+//
+//Authors
+//     Ashish Kamble
+//
+//This is curretly dummy function. It provides no functionality but is required 
+//for providing support for generating C code for AVR.
+
+if(waveform_mode>=3) then 
+disp("Error : Invalid input argument ''waveform_mode'' in AVRPWM2Setup function.");
+end
+if((waveform_mode==0)|(waveform_mode==1)) then
+{
+ //if((type(output_mode)~=8)|(output_mode>=2)) then
+ //disp("Error : Invalid input argument ''output_mode'' in AVRPWM2Setup function.");
+ //end
+}
+end
+if(waveform_mode==2) then
+{
+ if((type(output_mode)~=8)|(output_mode>=3)) then 
+ disp("Error : Invalid input argument ''output_mode'' in AVRPWM2Setup function.");
+ end
+}
+end
+
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRReadADC.sci b/2.3-1/macros/Hardware/AVR/AVRReadADC.sci
new file mode 100644
index 00000000..7fd3e67e
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRReadADC.sci
@@ -0,0 +1,44 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function adc_result = AVRReadADC(channel)
+// Function to get voltage on analog pin on AVR
+//
+// Calling Sequence
+//     u8AVRReadADCs(channel)
+//
+// Parameters
+//     channel 	: Select which channel is to be read. Values from 0-7 select one 
+//	             of the pins ADC0-ADC7. For other possible channel values refer
+//               datasheet
+//   Returns->  
+//     result 	: Digital value for the voltage present on channel selected
+//
+// Description
+//     This function returns digital value for present on adc pins. 'channel' 
+//     selects which of the ADC0-ADC7 is to be used for reading analog value.
+//     Apart from reading just ADC0-ADC7 other it can also read differential 
+//     voltages between some pins. For channel values for those options, please 
+//     refer datasheet.      
+//
+// Examples
+//     adc_result = u8AVRReadADC(0)   //Read ADC0
+//
+// Authors
+//     Siddhesh Wani Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.
+
+if(channel>=8) then 
+disp("Error : Inavlid input argument ''channel'' in AVRReadADC function.");
+end
+adc_result = 0;   //adc_result has been initialised to avoid runtime error.
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRSleep.sci b/2.3-1/macros/Hardware/AVR/AVRSleep.sci
new file mode 100644
index 00000000..a1b6add2
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRSleep.sci
@@ -0,0 +1,4 @@
+function AVRSleep(delay)
+
+
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRTimerSetup.sci b/2.3-1/macros/Hardware/AVR/AVRTimerSetup.sci
new file mode 100644
index 00000000..7c5dd1da
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRTimerSetup.sci
@@ -0,0 +1,56 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRTimerSetup(timer,prescaler,clock_source)
+//Function to setup Timers in ATmega16
+//Descrpition:
+//      This function tells the micro controller which clock source you will be using.
+//      The timer value and prescaler value passed in this function setup the timer as per
+//      your requirement.
+//
+//Parameters:
+//     timer : It is an integer value. 
+//             0 to setup timer0
+//             1 to setup timer1
+//             2 to setup timer2   
+//     prescaler : It is an integer value.
+//                 1 for no prescaling i.e clock will run at max 16Hz frequency
+//                 8 for prescaling clock by 8 i.e new clock frequency will be (clk/8)
+//                 64 for prescaling clock by 64 i.e new clock frequency will be (clk/64)
+//                 256 for prescaling clock by 256 i.e new clock frequency will be (clk/256)
+//                 1024 for prescaling clock by 1024 i.e new clock frequency will be (clk/1024)
+//     clock_source : It is an integer value.
+//                    0 if you are using internal clock source       
+//                    1 if you are using external clock source
+//Example
+//    AVRTimerSetup(0,64,0);  //This function will select timer0 with timer running as per
+//                            internal clock source and prescaled by 64.     
+//                           
+//See also
+//     AVRGetTimerValues
+//
+//Authors
+//     Ashish Kamble
+//
+//This is curretly dummy function. It provides no functionality but is required 
+//for providing support for generating C code for AVR.
+
+if(timer>=3) then
+disp("Error : Invalid input argument ''timer'' in AVRTimerSetup function.");
+end
+
+if(~((prescaler==1)|(prescaler==8)|(prescaler==64)|(prescaler==256)|(prescaler==1024))) then 
+disp("Error : Invalid input argument ''prescaler'' in AVRTimerSetup function.");
+end
+
+if(clock_source>=2) then
+disp("Error : Invalid input argument ''clock_source'' in AVRTimerSetup function.");
+end
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRUARTReceive.sci b/2.3-1/macros/Hardware/AVR/AVRUARTReceive.sci
new file mode 100644
index 00000000..790894fb
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRUARTReceive.sci
@@ -0,0 +1,30 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function received = AVRUARTReceive()
+// Function to Receive Char value send to ATmega16 using UART or USART.
+// Description
+//        This function Receives Char as 8 bit value.This value is stored in UDR at receiving       
+//        end.
+//
+//Examples
+//    state = AVRUARTReceive(); //This function will Receive char and return the entire value
+//                               
+//See also
+//     AVRUARTSetup
+//     AVRUARTTransmit
+//
+// Authors
+//     Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.
+received = 0; // received has been initialised to avoid runtime error.
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRUARTSetup.sci b/2.3-1/macros/Hardware/AVR/AVRUARTSetup.sci
new file mode 100644
index 00000000..32e5db86
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRUARTSetup.sci
@@ -0,0 +1,61 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRUARTSetup(mode, baudrate, stopbits, parity)
+// Function to Setup Serial Communication i.e UART or USART in ATmega16.
+// Description
+//        This function Setup the UART or USART for Serial Communicaion between ATmega16 
+//        and different micro controllers or between ATmega16 and Computer.   
+// 
+// Parameters
+//     mode : 
+//           0 for Asynchronous Normal mode
+//           1 for Asynchronous Double Speed mode
+//           2 for Synchronous mode
+//    
+//     baudrate : Enter one of the following available baudrates
+//                2400 , 4800 , 9600 , 14400 , 19200 , 28800 , 38400 , 57600 ,
+//                768000 , 115200 , 230400 , 250000 , 1000000 .
+//
+//     stopbits : 
+//               0 for one stopbit
+//               1 for two stopbits
+//
+//     parity : 
+//             0 for parity disabled
+//             1 for even parity    
+//             2 for odd parity
+// 
+//Examples
+//     AVRUARTSetup(0,9600,0,0); //This function will enable UART Communication for ATmega16
+//                                 with 9600 as baudrate,one stop bit and parity disabled
+// See also
+//     AVRUARTTransmit
+//     AVRUARTReceive
+//
+// Authors
+//     Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.
+if(mode>=3) then
+disp("Error : Invalid input argument ''mode'' in AVRUARTSetup function.");
+end
+
+if((baudrate <> 2400)&(baudrate <> 4800)&(baudrate <> 9600)&(baudrate <> 14400)&(baudrate <> 28800)&(baudrate <> 38400)&(baudrate <> 57600)&(baudrate <> 768000)&(baudrate <> 115200)&(baudrate <> 230400)&(baudrate <> 250000)& (baudrate <> 1000000)) then 
+disp("Error : Invalid input argument ''baudrate'' in AVRUARTSetup function.");
+end
+if(stopbits>=2) then
+disp("Error : Invalid input argument ''stopbits'' in AVRUARTSetup function.");
+end
+if(parity>=3) then
+disp("Error : Invalid input argument ''parity'' in AVRUARTSetup function.");
+end
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/AVRUARTTransmit.sci b/2.3-1/macros/Hardware/AVR/AVRUARTTransmit.sci
new file mode 100644
index 00000000..eb358499
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRUARTTransmit.sci
@@ -0,0 +1,33 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRUARTTransmit(data)
+// Function to Transmit data using UART or USART.
+// Description
+//        This function Tranmits data over UART or USART.The data to be transmitted can 
+//        be a Char , String , Unsigned Int, Signed Int. 
+//       
+// Parameter
+//        data : 
+//             The data to be transmitted can be a Char,String,Unsigned Int,Signed Int.        
+//
+//Examples
+//    AVRUARTTransmit("This is example");  //This function will transmit the entered string.
+//                               
+//See also
+//     AVRUARTSetup
+//     AVRUARTReceive
+//
+// Authors
+//     Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.    
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/GetAVRSupportFunctions.sci b/2.3-1/macros/Hardware/AVR/GetAVRSupportFunctions.sci
new file mode 100644
index 00000000..99c6242f
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/GetAVRSupportFunctions.sci
@@ -0,0 +1,43 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRSupportFunctions = GetAVRSupportFunctions()
+// -----------------------------------------------------------------
+// Get list of AVR peripherals supported 
+//
+// Input data:
+//    None
+//
+// Output data:
+//    None
+//
+// Author: Siddhesh Wani Ashish Kamble 
+// -----------------------------------------------------------------
+
+AVRSupportFunctions = [
+						"AVRADCSetup"
+						"AVRDigitalIn"
+						"AVRDigitalOut"
+						"AVRDigitalSetup"
+						"AVRDigitalPortSetup"
+                                                "AVRTimerSetup"
+						"AVRGetTimerValue"
+						"AVRPWM0Setup"
+						"AVRPWM0SetDuty"
+						"AVRPWM1Setup"
+						"AVRPWM1SetDuty"
+						"AVRPWM2Setup"
+						"AVRPWM2SetDuty"
+						"AVRReadADC"
+                                                "AVRSleep"
+						"AVRUARTSetup"
+						];
+
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/GetPeripheral.sci b/2.3-1/macros/Hardware/AVR/GetPeripheral.sci
new file mode 100644
index 00000000..ac909deb
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/GetPeripheral.sci
@@ -0,0 +1,31 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function Peripheral = GetPeripheral(FunName,InArg)
+// -----------------------------------------------------------------
+// Get an acronym for peripheral being used to be inserted in list of 
+// used peripherals
+//
+// Input data:
+//    FunName: Name of the function to be checked
+//    InArg:Input arguements passed to function 'FunName'  
+//
+// Output data:
+//    Peripheral: Acronym for peripheral to be initialised
+//
+// Author: Siddhesh Wani  
+// -----------------------------------------------------------------
+
+//select FunName
+
+//case AVRDigitalOut:
+//    Peripheral = list('PORT', InArg(1),InArg(2)];
+//end
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/InsertPeripheralInList.sci b/2.3-1/macros/Hardware/AVR/InsertPeripheralInList.sci
new file mode 100644
index 00000000..198ea1da
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/InsertPeripheralInList.sci
@@ -0,0 +1,27 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function InsertPeripheralInList(Peripheral,PeripheralListFile)
+// -----------------------------------------------------------------
+// Insert input peripheral in peripherals' list
+//
+// Input data:
+//    Peripheral: Peripheral of type 'list' to be instertd in list
+//    PeripheralListFile: Name of file containing list of peripheral used   
+//
+// Output data:
+//    None 
+//
+// Author: Siddhesh Wani  
+// -----------------------------------------------------------------
+
+load(PeripheralListFile,'PheripheralList');
+
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/IsAVRSupportFunction.sci b/2.3-1/macros/Hardware/AVR/IsAVRSupportFunction.sci
new file mode 100644
index 00000000..94f4af7c
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/IsAVRSupportFunction.sci
@@ -0,0 +1,32 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function Output = IsAVRSupportFunction(FunName)
+// -----------------------------------------------------------------
+// Check whether input function name is an AVR support function or not. 
+//
+// Input data:
+//    FunName: Name of the function to be checked
+//
+// Output data:
+//    Output: True or False depending whether given function is an AVR
+//            support functions or not 
+//
+// Author: Siddhesh Wani  
+// -----------------------------------------------------------------
+
+//Get list of supported functions for AVR
+AVRSupportFunctions = GetAVRSupportFunctions();
+
+//Check whether input function is present in above list or not
+FunNameInAVRSupport = members(FunName,AVRSupportFunctions);
+Output = bool2s(FunNameInAVRSupport~=0);
+
+endfunction
diff --git a/2.3-1/macros/Hardware/AVR/buildmacros.sce b/2.3-1/macros/Hardware/AVR/buildmacros.sce
new file mode 100644
index 00000000..2954a424
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/buildmacros.sce
@@ -0,0 +1,4 @@
+
+tbx_build_macros(TOOLBOX_NAME, get_absolute_file_path('buildmacros.sce'));
+
+clear tbx_build_macros;
diff --git a/2.3-1/macros/Hardware/AVR/lib b/2.3-1/macros/Hardware/AVR/lib
new file mode 100644
index 00000000..7631c354
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/lib
diff --git a/2.3-1/macros/Hardware/AVR/names b/2.3-1/macros/Hardware/AVR/names
new file mode 100644
index 00000000..8fcfdb75
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/names
@@ -0,0 +1,22 @@
+AVRADCSetup
+AVRDigitalIn
+AVRDigitalOut
+AVRDigitalPortSetup
+AVRDigitalSetup
+AVRGetTimerValue
+AVRPWM0SetDuty
+AVRPWM0Setup
+AVRPWM1SetDuty
+AVRPWM1Setup
+AVRPWM2SetDuty
+AVRPWM2Setup
+AVRReadADC
+AVRSleep
+AVRTimerSetup
+AVRUARTReceive
+AVRUARTSetup
+AVRUARTTransmit
+GetAVRSupportFunctions
+GetPeripheral
+InsertPeripheralInList
+IsAVRSupportFunction