1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
|
//Chapter 12
//Example 12.7
//page 475
//To calculate critcal clearing angle
clear;clc;
Xd=0.25; //direct axis transient reactance of the generator
Xl1=0.5; Xl2=0.4; //reactances of transmission line
E=1.2; //voltage behind transient reactance
Xinf=0.05; //reactnce before infinite bus
V=1; //infinite bus voltage
Pm=1; //mechanical input to the generator
delta=0:1:180;
//Normal operation (prefault)
X1=Xd+(Xl1*Xl2/(Xl1+Xl2))+Xinf; //equivalent reactance between sending ened and receiving end
//Power angle equation before the fault is
Pe1=(E*V/X1)*sind(delta);
//prefault operating power =1.0pu
delta0=asin(1/max(Pe1));
printf('Normal Operation (prefault):\n');
printf('X1=%0.3f PU\n',X1);
printf('Pe1=%0.1fsin(delta)\n\n',max(Pe1));
//during fault there will be no power transfer
Pe2=0;
printf('During Fault:\n');
printf('Pe2=%d\n\n',Pe2);
//Post fault operation(fault cleared by opening the faulted line)
X3=Xd+Xl1+Xinf;
Pe3=(E*V/X3)*sind(delta);
delta_max=%pi-asin(Pm/max(Pe3));
//from A1 and A2, we solve A1=A2
deff('[y]=fx(delta_cr)',"y=1.5*cos(delta_cr)+delta_cr-1.293-Pm*(delta_cr-delta0)");
delta_cr=fsolve(0.45,fx);
printf('Post fault operation(fault cleared by opening the faulted line):\n');
printf('X3=%0.1fPU\n',X3);
printf('Pe3=%0.1fsin(delta)\n',max(Pe3));
printf('Delta_cr=%0.4f rad =%0.2f deg',delta_cr,delta_cr*180/%pi);
plot(delta,Pe1,delta,Pe3,delta,Pm);
legend('Pe1=2.3sin(delta)','Pe3=1.5sin(delta)','Pm=1');
title('Power angle Diagram for example 12.7');
xlabel('delta (in degrees)----->');
ylabel('Electrical output (Pe)----->');
|
