1 files changed, 40 insertions, 0 deletions
diff --git a/683/CH4/EX4.1/MF_1.sce b/683/CH4/EX4.1/MF_1.sce
new file mode 100755
index 000000000..b01079dff
--- /dev/null
+++ b/683/CH4/EX4.1/MF_1.sce
@@ -0,0 +1,40 @@
+// sum 4-1
+clc;
+clear;
+d=70;
+dmin=50;
+dmax=80;
+D=sqrt(dmin*dmax);
+D=63;
+i=0.458*(D^(1/3))+(0.001*D);
+
+//standard tolerance for H8 is ST1
+ST1=25*i;
+ST1=ST1*10^-3;
+//standard tolerance of shaft for grade g7 is ST2
+ST2=16*i;
+ST2=ST2*10^-3;
+es=-(2.5*(D^0.333));
+es=es*10^-3;
+ei=es-ST2;
+//Lower limit for hole is LLH
+//Upper limit for hole is ULH
+//Upper limit for shaft is ULS
+//Lower limit for shaft is LLS
+LLH=d;
+ULH=LLH+ST1;
+ULS=LLH+es;
+LLS=ULS-ST2;
+//Maximum clearance is Cmax
+//minimum clearance is Cmin
+Cmax=ULH-LLS;
+Cmin=LLH-ULS;
+
+  // printing data in scilab o/p window
+  printf("LLH is %0.1f mm ",LLH);
+  printf("\n ULH is %0.3f mm ",ULH);
+  printf("\n ULS is %0.2f mm ",ULS);
+  printf("\n LLS is %0.2f mm ",LLS);
+  printf("\n Cmax is %0.3f mm ",Cmax);
+  printf("\n Cmin is %0.3f mm ",Cmin);
+ 
+\ No newline at end of file