diff options
Diffstat (limited to '405/CH8/EX8.3')
-rwxr-xr-x | 405/CH8/EX8.3/8_3.sce | 45 |
1 files changed, 45 insertions, 0 deletions
diff --git a/405/CH8/EX8.3/8_3.sce b/405/CH8/EX8.3/8_3.sce new file mode 100755 index 000000000..1c318d868 --- /dev/null +++ b/405/CH8/EX8.3/8_3.sce @@ -0,0 +1,45 @@ +clear;
+clc;
+printf("\t\t\tExample Number 8.3\n\n\n");
+// shape-factor algebra for open ends of cylinder
+// Example 8.3 (page no.-395)
+// solution
+
+d1 = 0.1;// [m] diameter of first cylinder
+d2 = 0.2;// [m] diameter of second cylinder
+L = 0.2;// [m] length of cylinder
+// we use the nomenclature of figure 8-15(page no.-388) for this problem and designate the open ends as surfaces 3 and 4.
+// we have
+L_by_r2 = L/(d2/2);
+r1_by_r2 = 0.5;
+// so from figure 8-15 or table 8-2(page no.-389) we obtain
+F21 = 0.4126;
+F22 = 0.3286;
+// using the reciprocity relation (equation 8-18) we have
+F12 = (d2/d1)*F21;
+// for surface 2 we have F12+F22+F23+F24 = 1.0
+// and from symmetry F23 = F24 so that
+F23 = (1-F21-F22)/2;
+F24 = F23;
+// using reciprocity again,
+A2 = %pi*d2*L;// [m^2]
+A3 = %pi*(d2^2-d1^2)/4;// [m^2]
+F32 = A2*F23/A3;
+// we observe that F11 = F33 = F44 = 0 and for surface 3 F31+F32+F34 = 1.0
+// so, if F31 can be determined, we can calculate the desired quantity F34. for surface 1 F12+F13+F14 = 1.0
+// and from symmetry F13 = F14 so that
+F13 = (1-F12)/2;
+F14 = F13;
+// using reciprocity gives
+A1 = %pi*d1*L;// [square meter]
+F31 = (A1/A3)*F13;
+// then
+F34 = 1-F31-F32;
+printf("shape factor between the open ends of the cylinder is %f ",F34);
+
+
+
+
+
+
+
|