3 files changed, 51 insertions, 0 deletions
diff --git a/3542/CH6/EX6.4/6_4.jpg b/3542/CH6/EX6.4/6_4.jpg
new file mode 100644
index 000000000..1bb6d5d6f
--- /dev/null
+++ b/3542/CH6/EX6.4/6_4.jpg
diff --git a/3542/CH6/EX6.4/6_4_plot.jpg b/3542/CH6/EX6.4/6_4_plot.jpg
new file mode 100644
index 000000000..61a91b990
--- /dev/null
+++ b/3542/CH6/EX6.4/6_4_plot.jpg
diff --git a/3542/CH6/EX6.4/Ex6_4.sce b/3542/CH6/EX6.4/Ex6_4.sce
new file mode 100644
index 000000000..78cb382c8
--- /dev/null
+++ b/3542/CH6/EX6.4/Ex6_4.sce
@@ -0,0 +1,51 @@
+// Example no 6.4
+// To design an RLC network that implements an IF quadrature FM detector 
+// Page no. 273
+
+clc;
+clear all;
+close;
+
+// Given data
+fc=10.7*10^6;                                               //Cut-off frequency in Hz
+B=500*10^3;                                                 //Bandwidth in Hz
+phi=5;                                                      //phase shift for good system in degree
+Q=tand(phi)/((fc+B/2)/fc-fc/(fc+B/2));                     //Q-factor
+L=10*10^(-6);                                              //Chosen value of inductor
+R=Q*2*%pi*fc*L;                                            //Value of Resistor
+c1=12.13*10^(-12);                                          //Chosen value of C1
+c=(Q/(R*2*%pi*fc))-c1;                                     //Value of capacitor
+
+// Displaying the result in command window
+printf('\n Value of Resistor required for RLC circuit = %0.3f kohm',R*10^(-3));
+printf('\n Value of Inductor required for RLC circuit = %0.0f microH',L*10^(6));
+printf('\n Value of Capacitor required for RLC circuit = %0.0f pF',c*10^(12));
+
+// Magnitude plot
+f=0.95*10^7:0.05*10^7:1.2*10^7;                           // Frequency range for plotting in Hz
+mgh=(2*%pi*f*R*c1)/sqrt(1+Q^2*((f^2-fc^2)/(f*fc))^2);     // Magnitude transfer function
+subplot(211);
+plot(f,mgh);
+a=gca();
+a.data_bounds=[0.95*10^7 0;1.2*10^7 2];                   // To see the vertical line hiddden by the y axis
+xlabel("Frequency","color","blue");
+ylabel("Magnitude","color","blue");
+title("Magnitude response","fontsize","6","color","red");
+
+// Phase plot
+f=0.95*10^7                                              // Initial frequency for plotting
+for i=1:6
+    if f<1.25*10^7 then
+        phH(i)=(%pi/2)+atan(Q*((f^2-fc^2)/(f*fc)));      // Phase transfer function
+        f=f+0.05*10^7;
+    end
+end
+
+f=0.95*10^7:0.05*10^7:1.2*10^7;
+subplot(212);
+plot(f,phH);
+a=gca();
+a.data_bounds=[0.95*10^7 1.2;1.2*10^7 2];              // To see the vertical line hiddden by the y axis
+xlabel("Frequency","color","blue");
+ylabel("Phase","color","blue");
+title("Phase response","fontsize","10","color","red");