1 files changed, 29 insertions, 0 deletions
diff --git a/2459/CH27/EX27.1/Ex27_1.sce b/2459/CH27/EX27.1/Ex27_1.sce
new file mode 100644
index 000000000..2d7b48b61
--- /dev/null
+++ b/2459/CH27/EX27.1/Ex27_1.sce
@@ -0,0 +1,29 @@
+//chapter27
+//example27.1
+//page574
+
+R1=10 // ohm
+R2=5 // ohm
+
+// for h11 and h21, imagine that output terminals are shorted hence it is clear that input impedence is equal to R1.
+    // this is h11 by definition so
+    h11=R1
+
+    // now current will flow of same magnitude but in opposite directions through input and output terminals so output_current/input_current = -1
+    // but this ratio is h21 by definition. Thus
+    h21=-1
+
+// for h12 and h22 imagine a voltage source on output terminals
+    // this voltage will be avilable on input terminals also since current through 10 ohm resistor = 0.
+    // hence input_voltage/output_voltage = 1
+    // but this ratio is h12 by definition. Thus
+    h12=1
+
+    // here output impedence looking into output terminals with input terminals open is 5 ohm.
+    // its reciprocal is h22 by definition. Thus
+    h22=1/5
+    
+printf("h11 = %.3f ohm \n",h11)
+printf("h21 = %.3f \n",h21)
+printf("h12 = %.3f \n",h12)
+printf("h22 = %.3f ohm \n",h22)