2 files changed, 45 insertions, 0 deletions
diff --git a/2459/CH25/EX25.5/Ex25_5.PNG b/2459/CH25/EX25.5/Ex25_5.PNG
new file mode 100644
index 000000000..b3ae71135
--- /dev/null
+++ b/2459/CH25/EX25.5/Ex25_5.PNG
diff --git a/2459/CH25/EX25.5/Ex25_5.sce b/2459/CH25/EX25.5/Ex25_5.sce
new file mode 100644
index 000000000..c525ff699
--- /dev/null
+++ b/2459/CH25/EX25.5/Ex25_5.sce
@@ -0,0 +1,45 @@
+//chapter25
+//example25.5
+//page545
+
+R1=20d3 // ohm
+R2=20d3 // ohm
+R3=30d3 // ohm
+R4=30d3 // ohm
+V=100 // V
+Rm=60d3 // ohm
+
+// case 1 : meter is not connected
+R=R1+R2+R3+R4
+I=V/R
+V_A=V
+V_B=V-I*R2
+V_C=V-I*(R1+R2)
+V_D=V-I*(R1+R2+R3)
+
+// case2 : meter is connected
+    // At A
+    V_A1=V
+    
+    // At B
+    R_total_B=R1+(Rm*(R2+R3+R4)/(Rm+R2+R3+R4))
+    I1=V/R_total_B
+    V_B1=I1*(Rm*(R2+R3+R4)/(Rm+R2+R3+R4))
+    
+    // At C
+    R_total_C=R1+R2+(Rm*(R3+R4)/(Rm+R3+R4))
+    I2=V/R_total_C
+    V_C1=V*(Rm*(R3+R4)/(Rm+R3+R4))/R_total_C
+    
+    // At D
+    R_total_D=R1+R2+R3+(Rm*R4/(Rm+R4))
+    I2=V/R_total_D
+    V_D1=V*(Rm*R4/(Rm+R4))/R_total_D
+    
+printf("CASE 1 : meter is not connected \n     Voltage at A = %.3f V \n     Volatge at B = %.3f V \n     Volatge at C = %.3f V \n     Volatge at D = %.3f V \n",V_A,V_B,V_C,V_D)
+printf("CASE 2 : meter is connected \n      At A then voltage at A = %.3f V",V_A1)
+printf("\n      At B then voltage at B = %.3f V",V_B1)
+printf("\n      At C then voltage at C = %.3f V",V_C1)
+printf("\n      At D then voltage at D = %.3f V \n \n",V_D1)
+    
+printf("resistance of voltmeter should be 100 times the resistance across \nwhich voltage is to be measured.Since this condition is not \nsatisfied here, readings are wrong. \n")