diff options
Diffstat (limited to '1835/CH4/EX4.6/Ex4_6.sce')
| -rwxr-xr-x | 1835/CH4/EX4.6/Ex4_6.sce | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/1835/CH4/EX4.6/Ex4_6.sce b/1835/CH4/EX4.6/Ex4_6.sce new file mode 100755 index 000000000..da0304e0c --- /dev/null +++ b/1835/CH4/EX4.6/Ex4_6.sce @@ -0,0 +1,35 @@ +//Chapter-4, Illustration 6, Page 137
+//Title: Gears and Gear Drivers
+//=============================================================================
+clc
+clear
+
+//INPUT DATA
+r=16;//Speed ratio
+mA=4;//Module of gear A in mm
+mB=mA;//Module of gear B in mm
+mC=2.5;//Mosule of gear C in mm
+mD=mC;//Module of gear D in mm
+C=150;//Distance between shafts in mm
+
+//CALCULATIONS
+t=sqrt(r);//Ratio of teeth
+T1=(C*2)/mA;//Sum of teeth of wheels A and B
+T2=(C*2)/mC;//Sum of teeth of wheels C and D
+TA=T1/(t+1);//Teeth of gear A
+TB=T1-TA;//Teeth of gear B
+TC=T2/(t+1);//Teeth of gear C
+TD=T2-TC;//Teeth of gear D
+
+//OUTPUT
+mprintf('Number of teeth on gear A is %3.0f \n Number of teeth on gear B is %3.0f \n Number of teeth on gear C is %3.0f \n Number of teeth on gear D is %3.0f',TA,TB,TC,TD)
+
+
+
+
+
+
+
+
+
+//================================END OF PROGRAM=============================================
|