1 files changed, 28 insertions, 0 deletions
diff --git a/1586/CH6/EX6.5/EXP6_5.sce b/1586/CH6/EX6.5/EXP6_5.sce
new file mode 100644
index 000000000..58f87b797
--- /dev/null
+++ b/1586/CH6/EX6.5/EXP6_5.sce
@@ -0,0 +1,28 @@
+clc;funcprot(0);//EXAMPLE 6.5
+// Initialisation of Variables
+F=8000;.......//Load applied for the aluminum alloy in lb
+F2=7600;......//Load applied for the aluminum alloy in lb at fracture
+dt1=0.505;.......//diameter of for the aluminum alloy in in
+dt2=0.497;.......//The diameter at maximum load
+Lt=2.120;..........//Final length at maxium load
+Lot=2;.............//Initial length of alluminum alloy
+Ff=7600;.........//Load applied for the aluminum alloy after fracture in lb
+df=0.398;.......//The diameter at maximum load after fracture
+Lf=0.205;.......//Final length at fracture
+//CALCULATIONS
+Es=F/((%pi/4)*dt1^2);.....//Engineering stress in psiAt the tensile or maximum load
+Ts=F/((%pi/4)*dt2^2);.....//True stress in psi At the tensile or maximum load
+Ee=(Lt-Lot)/Lot;........//Engineering strain At the tensile or maximum load
+Te=log(Lt/Lot);........//True strain At the tensile or maximum load
+Es2=F2/((%pi/4)*dt1^2);......//Engineering stress At fracture:
+Ts2=F2/((%pi/4)*df^2);......//True stress At fracture:
+Ee2=Lf/Lot;..........//Engineering strain At fracture:
+Te2=log(((%pi/4)*dt1^2)/((%pi/4)*df^2));.......//True strain At fracture:
+disp(Es,"Engineering stress in psiAt the tensile or maximum load")
+disp(Ts,"True stress in psi At the tensile or maximum load")
+disp(Ee,"Engineering strain At the tensile or maximum load")
+disp(Te,"True strain At the tensile or maximum load")
+disp(Es2,"Engineering stress At fracture:")
+disp(Ts2,"True stress At fracture")
+disp(Ee2,"Engineering strain At fracture:")
+disp(Te2,"True strain At fracture:")