1 files changed, 24 insertions, 0 deletions
diff --git a/1541/CH3/EX3.6/Chapter3_Example6.sce b/1541/CH3/EX3.6/Chapter3_Example6.sce
new file mode 100755
index 000000000..2c49988a2
--- /dev/null
+++ b/1541/CH3/EX3.6/Chapter3_Example6.sce
@@ -0,0 +1,24 @@
+//Chapter-3, Example 3.6, Page 3.17
+//=============================================================================
+clc
+clear
+
+//INPUT DATA
+VL=11000;//Supply line voltage in V
+P=12;//Number of poles
+f=50;//Supply frequency in Hz
+R2=0.2;//Rotor resistance in ohm
+X2=1.2;//Rotor reactance at stand still in ohm
+N=480;//Full load speed in rpm
+
+//CALCULATIONS
+s=(R2/X2);//Slip at maximum torque
+Ns=(120*f)/P;//Synchronous speed in rpm
+s1=(Ns-N)/Ns;//Slip at full load
+T=((R2^2+(s1^2*X2^2))/((2*X2)*(s1*R2)));//Ratio of maximum and full load torque
+T1=((R2^2+X2^2)/(2*X2*R2));//Ratio of maximum and starting torque
+
+//OUTPUT
+mprintf('a)Slip at maximum torque is %3.2f \nb)Ratio of maximum and full load torque is %3.2f \nc)Ratio of maximum and starting torque is %3.2f',s,T,T1)
+
+//=================================END OF PROGRAM==============================