initial commit / add all books

1 files changed, 38 insertions, 0 deletions

diff --git a/3772/CH7/EX7.10/Ex7_10.sce b/3772/CH7/EX7.10/Ex7_10.sce
new file mode 100644
index 000000000..feae8886b
--- /dev/null
+++ b/3772/CH7/EX7.10/Ex7_10.sce
@@ -0,0 +1,38 @@
+// Problem no 7.10,Page no.190
+
+clc;clear;
+close;
+
+sigma_s=90 //MPa //shear stress of steel
+sigma_d=60 //MPa //shear stress of duralumin
+G_d=28 //GPa //modulus of rigidity of duralumin
+G_s=84 //GPa //modulus of rigidity of steel
+L=1 //m //Length of shaft
+
+//Calculations
+
+//theta*L**-1=sigma_s*(G_s*R_s)**-1=sigma_d*(G_d*R_d)**-1
+
+//After substituting and simplifying,we get,
+//D=2*d
+
+//T_s=%pi*16**-1*d**3*sigma_s //N*m //torque of steel
+//T_d=%pi*16*(((D**4-d**4)*D**4)**-1)*sigma_d //N*m //torque of duralumin
+
+//After substituting and simplifying above two equations,we get,
+
+//T_s=17.6714*10**6*d**3 //N*m
+//T_d=88.3572*d**3 //N*m
+
+//T=T_s+T_d //Total torque
+
+//T=106.02875*10**6*d**3 
+
+d=(700*(106.02875*10**6)**-1)**0.333 //m 
+D=2*d //m
+R_s=d*2**-1 //m
+
+theta=(sigma_s*10**6*L*(G_s*10**9*R_s)**-1)*180*%pi**-1 //degree //Angle of twist
+
+//Result
+printf("The Angle of Twist is %.2f",theta);printf(" Degree")