initial commit / add all books

1 files changed, 40 insertions, 0 deletions

diff --git a/3772/CH16/EX16.7/Ex16_7.sce b/3772/CH16/EX16.7/Ex16_7.sce
new file mode 100644
index 000000000..8f5e86937
--- /dev/null
+++ b/3772/CH16/EX16.7/Ex16_7.sce
@@ -0,0 +1,40 @@
+// Problem 16.7,Page no.370
+
+clc;clear;
+close;
+
+W=270 //KN //Load 
+t=14 //mm //thickness of plate
+b=20 //cm //width of plate
+d=20 //mm //diameter of rivet
+sigma_s=70  //MPa //shear stress
+sigma_b=190 //MPa //stress in bearing
+sigma_t=110 //MPa //stress in tensile
+
+//Calculation
+
+S_1=1.75*%pi*4**-1*b**2*10**-4*sigma_s*10**6 //strength of one rivet in double shear
+S_2=20*10**-3*t*10**-3*sigma_b*10**6
+
+n=W*10**3*S_1**-1
+
+//Adopt 7 rivets
+
+//The plates may tear along section 1-1
+W_1=(20-4)*10**-2*t*10**-3*sigma_t*10**6 //N //Permissible Load
+
+//The plates may tear along section 2-2,at the same time shearing the 4 rivets along 1-1 
+W_2=(20-2*2)*10**-2*t*10**-3*sigma_t*10**6+2*S_1 //N //Permissible Load
+
+//The plates may tear along section 3-3,at the same time shearing the rivets along 1-1 and 2-2
+W_3=(20-3*2)*10**-2*t*10**-3*sigma_t*10**6+4*S_1 //N //Permissible Load
+
+W_s=7*S_1 //N //Load to shear all the rivets 
+W_c=7*S_2 //N //Load to crush all the rivets
+
+W_4=b*10**-2*t*10**-3*sigma_t*10**6 //N //Load carried by solid plate
+
+rho=W_1*W_4**-1*100 //% //Efficiency of joint
+ 
+//Result
+printf("Efficiency of joint is %.2f %%",rho)