initial commit / add all books

1 files changed, 66 insertions, 0 deletions

diff --git a/1445/CH7/EX7.26/ch7_ex_26.sce b/1445/CH7/EX7.26/ch7_ex_26.sce
new file mode 100644
index 000000000..71049f9d5
--- /dev/null
+++ b/1445/CH7/EX7.26/ch7_ex_26.sce
@@ -0,0 +1,66 @@
+//CHAPTER 7- SINGLE PHASE TRANSFORMER
+//Example 26
+
+disp("CHAPTER 7");
+disp("EXAMPLE 26");
+
+//VARIABLE INITIALIZATION
+va=10000;                           //apparent power
+v1=500;                             //primary voltage in Volts
+v2=250;                             //secondary voltage in Volts
+f=50;
+//open circuit parameters
+Voc=500;
+Io=2;
+Wi=100;                            // watts HT side
+Woc=Wi;                             //just to keep symbology
+//short circuit test
+Vsc=25;
+Isc=20;
+Wc=90;                             // watts HT side 
+//
+pf=0.8;
+//SOLUTION  
+//open circuit
+phi0=acos(Woc/(v1*Io));
+Ic=Io*cos(phi0);
+Iphi=Io*sin(phi0);
+Rc=v1/Ic;
+X=v1/Iphi;
+disp("SOLUTION (a)");
+disp(sprintf("The value of Ic is %f Amp",Ic));
+disp(sprintf("The value of IΦ is %f Amp",Iphi));
+disp(sprintf("The value of Rc is %f Ohm",Rc));
+disp(sprintf("The value of X is %fΩ",X));
+//
+//short circuit
+phisc=acos(Wc/(Vsc*Isc));
+pf1=cos(phisc);
+R_e1=Vsc*pf1/Isc;
+Z_e1=Vsc/Isc;
+X_e1=sqrt(Z_e1^2-R_e1^2); 
+disp(sprintf("The value of Power factor is %f",pf1));
+disp(sprintf("The value of Re1 is %f Ohm",R_e1));
+disp(sprintf("The value of Ze1 is %f Ohm",Z_e1));
+disp(sprintf("The value of Xe1 is %fΩ",X_e1)); 
+//
+I1=va/v1;
+phi=acos(pf);
+//R=ercosphi2+vx.sinphi2
+//E2=V2+I2.R
+%reg=(Isc*R_e1*pf+Isc*X_e1*sin(phi))*100/v1; 
+disp("SOLUTION (c(i))");
+disp(sprintf("The percent regulation at full load is %f",%reg));
+//
+//full load output at pf=0.8
+Pout=va*pf;
+ironLoss=Wi;
+cuLoss=Wc;
+loss=ironLoss+cuLoss;
+Pin=Pout+loss;
+eff=Pout*100/Pin;
+disp("SOLUTION (c(ii))");
+disp(sprintf("The percent efficiency at full load is %f",eff)); 
+disp(" "); 
+// 
+//END