initial commit / add all books

1 files changed, 72 insertions, 0 deletions

diff --git a/1328/CH20/EX20.4/20_4.sce b/1328/CH20/EX20.4/20_4.sce
new file mode 100644
index 000000000..c9986bb99
--- /dev/null
+++ b/1328/CH20/EX20.4/20_4.sce
@@ -0,0 +1,72 @@
+printf("\t example 20.4 \n");

+printf("\t approximate values are mentioned in the book \n");

+T1=450; // inlet hot fluid,F

+T2=150; // outlet hot fluid,F

+t1=85; // inlet cold fluid,F

+t2=100; // outlet cold fluid,F

+W=3360; // lb/hr

+w=11100; // lb/hr

+printf("\t 1.for heat balance \n");

+printf("\t for SO2 \n");

+c=0.165; // Btu/(lb)*(F)

+Q=((W)*(c)*(T1-T2)); // Btu/hr

+printf("\t total heat required for SO2 is : %.3e Btu/hr \n",Q);

+printf("\t for water \n");

+c=1; // Btu/(lb)*(F)

+Q=((w)*(c)*(t2-t1)); // Btu/hr

+printf("\t total heat required for water is : %.3e Btu/hr \n",Q);

+delt1=T2-t1; //F

+delt2=T1-t2; // F

+printf("\t delt1 is : %.0f F \n",delt1);

+printf("\t delt2 is : %.0f F \n",delt2);

+LMTD=((delt2-delt1)/((2.3)*(log10(delt2/delt1))));

+printf("\t LMTD is :%.0f F \n",LMTD);

+R=20;

+S=0.0412;

+FT=0.98; // fig 18

+delt=(FT*LMTD);

+printf("\t delt is : %.0f F \n",delt);

+Tc=((T2)+(T1))/(2); // caloric temperature of hot fluid,F

+printf("\t caloric temperature of hot fluid is : %.0f F \n",Tc);

+tc=((t1)+(t2))/(2); // caloric temperature of cold fluid,F

+printf("\t caloric temperature of cold fluid is : %.1f \n",tc);

+printf("\t hot fluid:inner tube side, SO2 \n");

+at=0.0512; // flow area, ft^2, table 11

+printf("\t flow area is : %.4f ft^2 \n",at);

+Gt=(W/(at)); // mass velocity,lb/(hr)*(ft^2)

+printf("\t mass velocity is : %.2e lb/(hr)*(ft^2) \n",Gt);

+mu2=0.041; // at 300F,lb/(ft)*(hr), fig 15

+D=0.256; // ft, table 11

+Ret=((D)*(Gt)/mu2); // reynolds number

+printf("\t reynolds number is : %.1e \n",Ret);

+jH=790; // from fig.24

+Z=0.006831; // Z=(k(c*mu/k)^(1/3)), Btu/(hr)*(ft)*(F/ft)

+hi=((jH)*(Z/D)); //Hi=(hi/phyp),using eq.6.15,Btu/(hr)*(ft^2)*(F)

+printf("\t hi is : %.1f Btu/(hr)*(ft^2)*(F) \n",hi);

+ID=3.068; // ft

+OD=3.5; // ft

+hio=((hi)*(ID/OD)); // using eq.6.5

+printf("\t Correct hio to the surface at the OD is : %.1f Btu/(hr)*(ft^2)*(F) \n",hio);

+printf("\t cold fluid water \n");

+L=8; // ft

+G=(w/(2*L));

+printf("\t G : %.0f lb/(hr)*(ft) \n",G);

+mu1=1.94; // at 92.5F, lb/(ft)*(hr)

+Re=(4*G/mu1);

+printf("\t Re is : %.2e \n",Re);

+Do=0.292; // ft

+ho=(65*(G/Do)^(1/3));

+printf("\t ho is : %.0f Btu/(hr)*(ft^2)*(F) \n",ho);

+Uc=((ho*hio)/(ho+hio)); // from eq 6.38

+printf("\t Uc is : %.1f Btu/(hr)*(ft^2)*(F) \n",Uc);

+Rd=0.01;

+hd=(1/Rd);

+printf("\t hd is : %.0f \n",hd);

+UD=((Uc*hd)/(Uc+hd));

+printf("\t UD is : %.1f Btu/(hr)*(ft^2)*(F) \n",UD);

+A=(Q/(UD*(LMTD)));

+printf("\t Area is : %.1f ft^2 \n",A); // calculation mistake in book

+a=0.917; // ft^2/ft, table 11

+l=(A/(a*8));

+printf("\t pipe length : %.2f \n",l);

+// end