initial commit / add all books

1 files changed, 102 insertions, 0 deletions

diff --git a/1328/CH10/EX10.3/10_3.sce b/1328/CH10/EX10.3/10_3.sce
new file mode 100644
index 000000000..389fa7413
--- /dev/null
+++ b/1328/CH10/EX10.3/10_3.sce
@@ -0,0 +1,102 @@
+printf("\t example 10.3 \n");

+printf("\t approximate values are mentioned in the book \n");

+T1=250; // inlet hot fluid,F

+T2=250; // outlet hot fluid,F

+t1=105; // inlet cold fluid,F

+t2=130; // outlet cold fluid,F

+w=50000; // lb/hr

+W=622; // lb/hr

+printf("\t 1.for heat balance \n");

+printf("\t for gas oil \n");

+c=0.47; // Btu/(lb)*(F)

+Q=((w)*(c)*(t2-t1)); // Btu/hr

+printf("\t total heat required for gas oil is : %.2e Btu/hr \n",Q);

+printf("\t for steam \n");

+l=945.5; // Btu/(lb)

+Q=((W)*(l)); // Btu/hr

+printf("\t total heat required for steam is : %.2e Btu/hr \n",Q);

+delt1=T2-t1; //F

+delt2=T1-t2; // F

+printf("\t delt1 is : %.0f F \n",delt1);

+printf("\t delt2 is : %.0f F \n",delt2);

+LMTD=((delt2-delt1)/((2.3)*(log10(delt2/delt1))));

+printf("\t LMTD is :%.1f F \n",LMTD);

+tc=((t1)+(t2))/2; // caloric temperature of cold fluid,F

+printf("\t caloric temperature of cold fluid is : %.1f F \n",tc);

+printf("\t hot fluid:shell side,steam \n");

+ID=15.25; // in

+C=0.25; // clearance

+B=15; // baffle spacing,in

+PT=1.25;

+as=((ID*C*B)/(144*PT)); // flow area,ft^2, eq 7.1

+printf("\t flow area is : %.3f ft^2 \n",as);

+Gs=(6220/as); // mass velocity,lb/(hr)*(ft^2), calculation mistake

+printf("\t mass velocity is : %.2e lb/(hr)*(ft^2) \n",Gs);

+mu1=0.0314; // at 250F,lb/(ft)*(hr), from fig.15

+De=0.060; // from fig.29,ft

+Res=((De)*(Gs)/mu1); // reynolds number, calculation mistake

+printf("\t reynolds number is : %.2e \n",Res);

+ho=1500; //Btu/(hr)*(ft^2)*(F)

+printf("\t individual heat transfer coefficient is : %.0f Btu/(hr)*(ft^2)*(F) \n",ho);

+printf("\t cold fluid:inner tube side,crude oil \n");

+d1=0.5; // in

+d2=0.87; // in

+at1=((3.14*(d2^2-d1^2))/4);

+printf("\t at1 is : %.1f in^2 \n",at1);

+Nt=86;

+n=2; // number of passes

+L=12; //ft

+at=((Nt*at1)/(144*n)); // total area,ft^2,from eq.7.48

+printf("\t flow area is : %.3f ft^2 \n",at);

+Gt=(w/(at)); // mass velocity,lb/(hr)*(ft^2)

+printf("\t mass velocity is : %.1e lb/(hr)*(ft^2) \n",Gt);

+De=(d2^2-d1^2)/(12*d2);

+printf("\t De is : %.4f ft \n",De);

+mu2=16.7; // at 117F,lb/(ft)*(hr)

+Ret=((De)*(Gt)/mu2); // reynolds number

+printf("\t reynolds number is : %.2e \n",Ret);

+jH=3.1; // from fig.24

+Z=0.35; // Z=(K*(c*mu3/k)^(1/3)),Btu/(hr)(ft^2)(F/ft), at mu3=6.9cp and 28 API

+Hi=((jH)*(1/De)*(Z)); //Hi=(hi/phyp),using eq.6.15a,Btu/(hr)*(ft^2)*(F)

+printf("\t Hi is : %.1f Btu/(hr)*(ft^2)*(F) \n",Hi);

+ID=0.87; // ft

+OD=1; //ft

+Hio=((Hi)*(ID/OD)); //Hio=(hio/phyp), using eq.6.5

+printf("\t Correct Hi0 to the surface at the OD is : %.1f Btu/(hr)*(ft^2)*(F) \n",Hio);

+muw=4.84; // lb/(ft)*(hr), from fig.14

+phyt=(mu2/muw)^0.14;

+printf("\t phyt is : %.2f \n",phyt); // from fig.24

+hio=(Hio)*(phyt); // from eq.6.37

+printf("\t Correct hi0 to the surface at the OD is : %.1f Btu/(hr)*(ft^2)*(F) \n",hio);

+tw=(tc)+(((ho)/(hio+ho))*(T1-tc)); // from eq.5.31

+printf("\t tw is : %.0f F \n",tw);

+Uc=((hio)*(ho)/(hio+ho)); // clean overall coefficient,Btu/(hr)*(ft^2)*(F)

+printf("\t clean overall coefficient is : %.1f Btu/(hr)*(ft^2)*(F) \n",Uc);

+A=270; // ft^2

+printf("\t total surface area is : %.0f ft^2 \n",A);

+UD=((Q)/((A)*(LMTD)));

+printf("\t actual design overall coefficient is : %.1f Btu/(hr)*(ft^2)*(F) \n",UD);

+Rd=((Uc-UD)/((UD)*(Uc))); // (hr)*(ft^2)*(F)/Btu

+printf("\t actual Rd is : %.3f (hr)*(ft^2)*(F)/Btu \n",Rd);

+printf("\t pressure drop  for annulus \n");

+f=0.0016; // friction factor for reynolds number 25300, using fig.29

+s=0.00116; // for reynolds number 25300,using fig.6

+Ds=15.25/12; // ft

+phys=1;

+N=(12*L/B); // number of crosses,using eq.7.43

+printf("\t number of crosses are : %.0f \n",N);

+delPs=((f*(19600^2)*(Ds)*(N))/(5.22*(10^10)*(De)*(s)*(phys)))/(2); // using eq.7.44,psi

+printf("\t delPs is : %.1f psi \n",delPs);

+printf("\t pressure drop  for inner pipe \n");

+dt=(d2-d1)/(12); // ft

+printf("\t dt is : %.4f ft \n",dt);

+Ret2=(dt*Gt/mu2);

+printf("\t Ret2 is : %.0f \n",Ret2);

+f=0.00066; // friction factor for reynolds number 8220, using fig.26

+phyt=1.35; // fig 6

+printf("\t phyt is : %.2f \n",phyt);

+s=0.85;

+delPt=((f*(420000^2)*(L)*(n))/(5.22*(10^10)*(0.0309)*(s)*(phyt))); // using eq.7.45,psi

+printf("\t delPt is : %.1f psi \n",delPt);

+printf("\t delPr is negligible \n");

+//end