1 files changed, 0 insertions, 51 deletions
diff --git a/Resources/OpenPLCv2/firmware/ADC.test.arduino/one/libraries/vishnuADC.cpp b/Resources/OpenPLCv2/firmware/ADC.test.arduino/one/libraries/vishnuADC.cpp
deleted file mode 100644
index 01d6931..0000000
--- a/Resources/OpenPLCv2/firmware/ADC.test.arduino/one/libraries/vishnuADC.cpp
+++ /dev/null
@@ -1,51 +0,0 @@
-#include "vishnuADC.h"
-#include "Arduino.h"
-
-/**
- * Constructor of the class
- * @param io_pin_cs a byte indicating the pin to be use as the chip select pin (CS)
- */
-ADS1118::ADS1118(uint8_t io_pin_cs) {
-    cs = io_pin_cs;
-}
-
-/**
- * This method initialize the SPI port and the config register
- */
-void ADS1118::begin() {
-    pinMode(cs, OUTPUT);
-	digitalWrite(cs, HIGH);
-    SPI.begin();
-    SPI.beginTransaction(SPISettings(SCLK, MSBFIRST, SPI_MODE1));
-	configRegister.bits={RESERVED, VALID_CFG, PULLUP, ADC_MODE, RATE_8SPS, SINGLE_SHOT, FSR_0256, DIFF_0_1, START_NOW}; //Default values
-}
-
-/**
- * Getting the temperature in degrees celsius from the internal sensor of the ADS1118
- * @return A double (32bits) containing the temperature in degrees celsius of the internal sensor
- */
-double ADS1118::getTemperature() {
-    uint16_t convRegister;
-    uint8_t dataMSB, dataLSB, configMSB, configLSB, count=0;
-	if(lastSensorMode==TEMP_MODE)
-		count=1;  //Lucky you! We don't have to read twice the sensor
-	else
-		configRegister.bits.sensorMode=TEMP_MODE; //Sorry but we will have to read twice the sensor
-    do{
-		digitalWrite(cs, LOW);
-		dataMSB = SPI.transfer(configRegister.byte.msb);
-		dataLSB = SPI.transfer(configRegister.byte.lsb);
-		configMSB = SPI.transfer(configRegister.byte.msb);
-		configLSB = SPI.transfer(configRegister.byte.lsb);
-		digitalWrite(cs, HIGH);
-		for(int i=0;i<CONV_TIME[configRegister.bits.rate];i++) //Lets wait the conversion time
-			delayMicroseconds(1000);
-		count++;
-	}while (count<=1);  //We make two readings because the second reading is the temperature.
-	convRegister = ((dataMSB << 8) | (dataLSB))>>4;
-    if((convRegister<<2) >= 0x8000){
-		convRegister=((~convRegister)>>2)+1; //Converting to right-justified and applying binary twos complement format
-        return (double)(convRegister*0.03125*-1);
-    }
-    return (double)convRegister*0.03125;
-}
-\ No newline at end of file