diff options
Diffstat (limited to 'OpenPLC_version_1/Experiments/1_LED-PLC/LED.rst')
| -rwxr-xr-x | OpenPLC_version_1/Experiments/1_LED-PLC/LED.rst | 32 |
1 files changed, 0 insertions, 32 deletions
diff --git a/OpenPLC_version_1/Experiments/1_LED-PLC/LED.rst b/OpenPLC_version_1/Experiments/1_LED-PLC/LED.rst deleted file mode 100755 index 1d22874..0000000 --- a/OpenPLC_version_1/Experiments/1_LED-PLC/LED.rst +++ /dev/null @@ -1,32 +0,0 @@ -Light Emitting Diode -==================== - -Overview --------- - -LEDs (light emitting diodes) are used in all sorts of -clever things which is why we have induced them in the kit. -We will start off with something very simple, turning one -ON and OFF, repeatedly,producing a pleasant blinking effect. -In the ld micro insert coil and insert contacts and also -insert Ton and Toff and give particular timings for both. -Burn the code to OpenPLC and watch the output - - -Components required -------------------- - -OpenPLC board - - -blinking of LED ---------------- - -For blinking of LED we use timers in ldmicro, On timer(Ton) and Off timer(Toff). The LED is connected to pin 35 on the board. -The code blinkin.ld illustrates above logic. - -switch on LED -------------- - -We can control on/off LED by using an input to the PLC. The input switch is connected to pin 1 and LED is connected to the same pin 35. -The code for this experiment is switch-led.ld |