diff options
Diffstat (limited to 'OpenModelicaArduino/package.mo')
| -rw-r--r-- | OpenModelicaArduino/package.mo | 66 |
1 files changed, 51 insertions, 15 deletions
diff --git a/OpenModelicaArduino/package.mo b/OpenModelicaArduino/package.mo index 15c4f47..b8addeb 100644 --- a/OpenModelicaArduino/package.mo +++ b/OpenModelicaArduino/package.mo @@ -85,8 +85,9 @@ model AnalogInput "Reads an analog signal from the specified pin" parameter Real InitValue = 0 "Initial value until the board responds" annotation(Dialog(group = "Initialization")); parameter Real MinValue = 0 "Minimum value when the ADC reads 0" annotation(Dialog(group = "Scaling")); parameter Real MaxValue = 1 "Maximum value when the ADC reads 1024" annotation(Dialog(group = "Scaling")); + parameter Integer adcResolution = 10 "Resolution of the ADC your board is using" annotation(Dialog(group = "Scaling")); equation - y = OpenModelicaArduino.Internal.ExternalFunctions.readAnalogPin(Pin, MinValue, MaxValue, InitValue, pinConnector); + y = OpenModelicaArduino.Internal.ExternalFunctions.readAnalogPin(Pin, MinValue, MaxValue, InitValue, pinConnector, adcResolution); annotation(Documentation(info = "<html><p>Reads an analog signal from the specified pin. This component uses the 'analogRead' function of Arduino.</p> <p><strong>Signal Range:</strong> By default, the signal goes from 0 to 1 where 0 represents no voltage and 1 the voltage reference of the ADC in the board. This signal can be scaled by setting the 'MinValue' and 'MaxValue' parameters.</p> <p>Not all pins support analog input. Check the documentation of your board to find the pin capabilities.</p> @@ -110,6 +111,14 @@ end AnalogInput; + + + + + + + + model AnalogOutput "Writes an analog signal to the specified pin" extends OpenModelicaArduino.Internal.Icons.Block; Modelica.Blocks.Interfaces.RealInput u annotation(Placement(visible = true, transformation(origin = {-110, -0}, extent = {{-25, -25}, {25, 25}}, rotation = 0), iconTransformation(origin = {-100, 0}, extent = {{-20, -20}, {20, 20}}, rotation = 0))); @@ -186,6 +195,7 @@ end AnalogOutput; end Servo; + annotation(Icon(coordinateSystem(extent = {{-100, -100}, {100, 100}}, preserveAspectRatio = true, initialScale = 0.1, grid = {10, 10}), graphics = {Rectangle(visible = true, origin = {-30, 30}, fillColor = {250, 105, 0}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-25, -25}, {25, 25}}, radius = 50), Rectangle(visible = true, origin = {30, 30}, fillColor = {243, 134, 48}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-25, -25}, {25, 25}}, radius = 50), Rectangle(visible = true, origin = {-30, -30}, fillColor = {167, 219, 216}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-25, -25}, {25, 25}}, radius = 50), Rectangle(visible = true, origin = {30, -30}, fillColor = {105, 210, 231}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-25, -25}, {25, 25}}, radius = 50)}), Diagram(coordinateSystem(extent = {{-148.5, -105}, {148.5, 105}}, preserveAspectRatio = true, initialScale = 0.1, grid = {5, 5}))); end Pins; @@ -319,6 +329,7 @@ end customBoard; + annotation(Icon(coordinateSystem(extent = {{-100, -100}, {100, 100}}, preserveAspectRatio = true, initialScale = 0.1, grid = {10, 10}), graphics = {Polygon(visible = true, origin = {12.096, 9.352}, fillColor = {0, 128, 0}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, points = {{-85.75100000000001, 70.648}, {-102.737, 66.761}, {-105.751, 50.648}, {-105.751, -69.352}, {-99.47499999999999, -85.465}, {-85.75100000000001, -89.352}, {74.249, -89.352}, {81.746, -83.29000000000001}, {86.32899999999999, -74.352}, {84.249, 34.141}, {82.185, 50.648}, {74.732, 67.486}, {52.373, 70.648}, {31.729, 70.648}}, smooth = Smooth.Bezier), Rectangle(visible = true, origin = {-69.67700000000001, 40}, fillColor = {106, 108, 116}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, extent = {{-32.24, -20}, {32.24, 20}}, radius = 10), Rectangle(visible = true, origin = {-77.83199999999999, -45.041}, fillPattern = FillPattern.Solid, extent = {{-25.915, -15.041}, {25.915, 15.041}}, radius = 10), Rectangle(visible = true, origin = {24.177, 70}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, extent = {{-54.177, -6.186}, {54.177, 6.186}}, radius = 10), Rectangle(visible = true, origin = {23.906, -63.814}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, extent = {{-64.17700000000001, -6.186}, {64.17700000000001, 6.186}}, radius = 10), Rectangle(visible = true, origin = {21.91, 0}, fillPattern = FillPattern.Solid, extent = {{-28.09, -25}, {28.09, 25}}, radius = 10), Rectangle(visible = true, origin = {78.083, -63.624}, fillColor = {250, 105, 0}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {68.083, -63.624}, fillColor = {243, 134, 48}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {58.083, -63.624}, fillColor = {250, 105, 0}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {48.083, -63.624}, fillColor = {243, 134, 48}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {38.083, -63.624}, fillColor = {250, 105, 0}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {28.083, -63.624}, fillColor = {243, 134, 48}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {70.00100000000001, 70}, fillColor = {167, 219, 216}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {60.001, 70}, fillColor = {105, 210, 231}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {50.001, 70}, fillColor = {167, 219, 216}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {40.001, 70}, fillColor = {105, 210, 231}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {30.001, 70}, fillColor = {167, 219, 216}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {20.001, 70}, fillColor = {105, 210, 231}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {10.001, 70}, fillColor = {167, 219, 216}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {0.001, 70}, fillColor = {105, 210, 231}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {-9.999000000000001, 70}, fillColor = {167, 219, 216}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {-19.999, 70}, fillColor = {105, 210, 231}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {-31.917, -63.624}, fillColor = {204, 208, 224}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {-21.917, -63.624}, fillColor = {204, 208, 224}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {-11.917, -63.624}, fillColor = {204, 208, 224}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50), Rectangle(visible = true, origin = {-1.917, -63.624}, fillColor = {204, 208, 224}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, borderPattern = BorderPattern.Engraved, extent = {{-4.118, -3.624}, {4.118, 3.624}}, radius = 50)}), Diagram(coordinateSystem(extent = {{-148.5, -105}, {148.5, 105}}, preserveAspectRatio = true, initialScale = 0.1, grid = {5, 5}))); end Boards; @@ -328,7 +339,7 @@ end customBoard; model BlinkLed "Basic example of blinking an LED" extends Modelica.Icons.Example; replaceable OpenModelicaArduino.Boards.Arduino arduino(Port = "/dev/ttyACM0", ShowPinCapabilities = true, UseDTR = false) annotation(Placement(visible = true, transformation(origin = {30, -10}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); - OpenModelicaArduino.Pins.DigitalOutput digitalOutput(Pin = 9) annotation(Placement(visible = true, transformation(origin = {0, -10}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); + OpenModelicaArduino.Pins.DigitalOutput digitalOutput(Pin = 30) annotation(Placement(visible = true, transformation(origin = {0, -10}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); Modelica_DeviceDrivers.Blocks.OperatingSystem.SynchronizeRealtime synchronizeRealtime1 annotation( Placement(visible = true, transformation(origin = {35, 15}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); Modelica.Blocks.Sources.BooleanPulse booleanPulse annotation( @@ -374,13 +385,18 @@ end BlinkLed; model DimmingLed "Changing the intensity of an LED" extends Modelica.Icons.Example; OpenModelicaArduino.Boards.Arduino arduino(Port = "/dev/ttyACM0", ShowPinCapabilities = true) annotation(Placement(visible = true, transformation(origin = {30, -10}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); - Pins.AnalogOutput analogOutput(Pin = 9) annotation(Placement(visible = true, transformation(origin = {0, -10}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); - Modelica.Blocks.Sources.Sine sine(amplitude = 1 / 2, freqHz = 1 / 4, offset = 1 / 2) annotation(Placement(visible = true, transformation(origin = {-30, -10}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); + Pins.AnalogOutput analogOutput(MaxValue = 512, MinValue = -512, Pin = 30) annotation(Placement(visible = true, transformation(origin = {0, -10}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); Modelica_DeviceDrivers.Blocks.OperatingSystem.SynchronizeRealtime synchronizeRealtime1 annotation( - Placement(visible = true, transformation(origin = {35, 10}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); + Placement(visible = true, transformation(origin = {35, 25}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); + OpenModelicaArduino.Pins.AnalogInput analogInput1(MaxValue = 512, MinValue = -512, Pin = 23) annotation( + Placement(visible = true, transformation(origin = {-30, -10}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); equation - connect(sine.y, analogOutput.u) annotation(Line(visible = true, origin = {-14.5, -10}, points = {{-4.5, 0}, {4.5, 0}}, color = {0, 0, 127})); - connect(analogOutput.pinConnector, arduino.boardConnector) annotation(Line(visible = true, origin = {20, -10}, points = {{-10, -0}, {10, 0}})); + connect(analogInput1.pinConnector, arduino.boardConnector) annotation( + Line(points = {{-40, -10}, {-45, -10}, {-45, -40}, {30, -40}, {30, -10}, {30, -10}})); + connect(analogInput1.y, analogOutput.u) annotation( + Line(points = {{-20, -10}, {-10, -10}, {-10, -10}, {-10, -10}}, color = {0, 0, 127})); + connect(analogOutput.pinConnector, arduino.boardConnector) annotation( + Line(visible = true, origin = {20, -10}, points = {{-10, -0}, {10, 0}})); annotation(experiment(Interval = 0.001, __Wolfram_SynchronizeWithRealTime = true), Icon(coordinateSystem(extent = {{-100, -100}, {100, 100}}, preserveAspectRatio = false, initialScale = 0.1, grid = {10, 10})), preferredView = "diagram", Documentation(info = "<html><h4>Hardware Components Used</h4> <ul> <li>1 Arduino board</li> @@ -455,10 +471,10 @@ end BlinkLed; model SimpleONOFF "A simple On/Off controller" extends Modelica.Icons.Example; OpenModelicaArduino.Boards.Arduino arduino(Port = "/dev/ttyACM0") annotation(Placement(visible = true, transformation(origin = {0, 15}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); - OpenModelicaArduino.Pins.AnalogInput analogInput1( MaxValue = 3.3 * 100,Pin = 16) annotation(Placement(visible = true, transformation(origin = {30, 15}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); + OpenModelicaArduino.Pins.AnalogInput analogInput1(MaxValue = 3.3 * 100,Pin = 23, adcResolution = 12) annotation(Placement(visible = true, transformation(origin = {30, 15}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); Modelica.Blocks.Sources.Constant Reference(k = 40) annotation(Placement(visible = true, transformation(origin = {35, -25}, extent = {{-10, -10}, {10, 10}}, rotation = -180))); Modelica.Blocks.Math.Add add1(k2 = +1, k1 = -1) annotation(Placement(visible = true, transformation(origin = {-0, -25}, extent = {{10, -10}, {-10, 10}}, rotation = 0))); - Pins.DigitalOutput digitalOutput(Pin = 10) annotation(Placement(visible = true, transformation(origin = {-30, 15}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); + Pins.DigitalOutput digitalOutput(Pin = 30) annotation(Placement(visible = true, transformation(origin = {-30, 15}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); Modelica.Blocks.Logical.Hysteresis hysteresis(uLow = -1, uHigh = 1) annotation(Placement(visible = true, transformation(origin = {-30, -25}, extent = {{10, -10}, {-10, 10}}, rotation = 0))); Modelica_DeviceDrivers.Blocks.OperatingSystem.SynchronizeRealtime synchronizeRealtime1 annotation( Placement(visible = true, transformation(origin = {42.5, 42.5}, extent = {{-7.5, -7.5}, {7.5, 7.5}}, rotation = 0))); @@ -488,6 +504,17 @@ end BlinkLed; + + + + + + + + + + + model UsingArduinoLeonardo "Basic example of blinking an LED" extends OpenModelicaArduino.Examples.BlinkLed(redeclare ModelPlug.Boards.ArduinoLeonardo arduino); annotation(experiment(StopTime = 10, Interval = 0.001, __Wolfram_SynchronizeWithRealTime = true), Documentation(info = "<html><h4>Hardware Components Used </h4> @@ -561,17 +588,17 @@ end BlinkLed; Placement(visible = true, transformation(origin = {13, 29}, extent = {{-25, -25}, {25, 25}}, rotation = 0))); Modelica_DeviceDrivers.Blocks.OperatingSystem.SynchronizeRealtime synchronizeRealtime1 annotation( Placement(visible = true, transformation(origin = {54, 78}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); - OpenModelicaArduino.Pins.AnalogOutput analogOutput1(MaxValue = 255, Pin = 9) annotation( + OpenModelicaArduino.Pins.AnalogOutput analogOutput1(MaxValue = 255, Pin = 30) annotation( Placement(visible = true, transformation(origin = {-57, 29}, extent = {{-15, -15}, {15, 15}}, rotation = 0))); - OpenModelicaArduino.Pins.DigitalOutput digitalOutput1(Pin = 6) annotation( + OpenModelicaArduino.Pins.DigitalOutput digitalOutput1(Pin = 8) annotation( Placement(visible = true, transformation(origin = {-45, -23}, extent = {{-13, -13}, {13, 13}}, rotation = 90))); - OpenModelicaArduino.Pins.DigitalOutput digitalOutput2(Pin = 7) annotation( + OpenModelicaArduino.Pins.DigitalOutput digitalOutput2(Pin = 9) annotation( Placement(visible = true, transformation(origin = {50, -28}, extent = {{-10, -10}, {10, 10}}, rotation = 90))); Modelica.Blocks.Sources.BooleanConstant booleanConstant1(k = true) annotation( Placement(visible = true, transformation(origin = {-70, -70}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); Modelica.Blocks.Sources.BooleanConstant booleanConstant2(k = false) annotation( Placement(visible = true, transformation(origin = {14, -74}, extent = {{-10, -10}, {10, 10}}, rotation = 0))); - OpenModelicaArduino.Pins.AnalogInput analogInput1(Pin = 16) annotation( + OpenModelicaArduino.Pins.AnalogInput analogInput1(MaxValue = 1024, Pin = 23) annotation( Placement(visible = true, transformation(origin = {-56, 74}, extent = {{-14, -14}, {14, 14}}, rotation = 0))); equation connect(analogInput1.y, analogOutput1.u) annotation( @@ -681,13 +708,21 @@ end BlinkLed; input Real max; input Real init; input Integer board; + input Integer adcResolution; output Real value; - external "C" value = readAnalogPin(pin, min, max, init, board) annotation(Include = "#include \"modelPlugFirmata.h\"", Library = "modelPlugFirmata", IncludeDirectory = "modelica://OpenModelicaArduino/Resources/Include", LibraryDirectory = "modelica://OpenModelicaArduino/Resources/Library"); + external "C" value = readAnalogPin(pin, min, max, init, board, adcResolution) annotation(Include = "#include \"modelPlugFirmata.h\"", Library = "modelPlugFirmata", IncludeDirectory = "modelica://OpenModelicaArduino/Resources/Include", LibraryDirectory = "modelica://OpenModelicaArduino/Resources/Library"); end readAnalogPin; + + + + + + + class FirmataBoardObject extends ExternalObject; @@ -756,6 +791,7 @@ end BlinkLed; external "C" writeServoPin(pin, board, value, MinPulse, MaxPulse) annotation(Include = "#include \"modelPlugFirmata.h\"", Library = "modelPlugFirmata", IncludeDirectory = "modelica://OpenModelicaArduino/Resources/Include", LibraryDirectory = "modelica://OpenModelicaArduino/Resources/Library"); end writeServoPin; + annotation(Icon(coordinateSystem(extent = {{-100, -100}, {100, 100}}, preserveAspectRatio = true, initialScale = 0.1, grid = {10, 10}), graphics = {Text(visible = true, origin = {11.425, 9.596}, extent = {{-101.424, -59.596}, {78.57599999999999, 40.404}}, textString = "EF")}), Documentation(info = "", revisions = ""), Diagram(coordinateSystem(extent = {{-148.5, 105}, {148.5, -105}}, preserveAspectRatio = true, initialScale = 0.1, grid = {10, 10})), Icon(coordinateSystem(extent = {{-100, -100}, {100, 100}}), graphics = {Rectangle(visible = true, fillColor = {209, 209, 209}, fillPattern = FillPattern.Solid, extent = {{-100, -100}, {75, 75}}), Polygon(visible = true, fillColor = {236, 236, 236}, fillPattern = FillPattern.Solid, points = {{-100, 75}, {-75, 100}, {100, 100}, {75, 75}}), Polygon(visible = true, fillColor = {177, 177, 177}, fillPattern = FillPattern.Solid, points = {{75, -100}, {75, 75}, {100, 100}, {100, -75}}), Text(visible = true, extent = {{-95.95, -91.88}, {63.97, 71.52}}, textString = "C")})); end ExternalFunctions; @@ -884,4 +920,4 @@ end BlinkLed; <p> </p> <p> </p></html>", revisions = ""), version = "1.2", Icon(coordinateSystem(extent = {{-100, -100}, {100, 100}}, preserveAspectRatio = true, initialScale = 0.1, grid = {5, 5}), graphics = {Rectangle(visible = true, fillColor = {190, 53, 19}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, extent = {{-100, -100}, {100, 100}}, radius = 25), Polygon(visible = true, origin = {-17.857, -4.643}, fillColor = {128, 128, 128}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, points = {{42.857, 59.643}, {42.857, 64.643}, {37.857, 69.643}, {32.857, 69.643}, {-17.143, 69.643}, {-42.143, 54.643}, {-57.143, 34.643}, {-65.22199999999999, 4.643}, {-57.143, -25.357}, {-42.143, -45.357}, {-17.143, -60.357}, {32.857, -60.357}, {37.857, -60.357}, {42.857, -55.357}, {42.857, -50.357}}, smooth = Smooth.Bezier), Polygon(visible = true, origin = {-17.857, -4.643}, fillColor = {255, 255, 255}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, points = {{42.857, 59.643}, {42.857, 64.643}, {37.857, 69.643}, {30.028, 54.643}, {-12.143, 59.643}, {-37.143, 44.643}, {-50.141, 26.339}, {-55.168, 4.643}, {-52.143, -20.357}, {-42.143, -42.453}, {-17.143, -60.357}, {32.857, -60.357}, {37.857, -60.357}, {42.857, -55.357}, {42.857, -50.357}}, smooth = Smooth.Bezier), Rectangle(visible = true, origin = {50, 27.5}, lineColor = {128, 128, 128}, fillColor = {255, 255, 255}, fillPattern = FillPattern.HorizontalCylinder, extent = {{-25, -12.5}, {25, 12.5}}), Rectangle(visible = true, origin = {50, -27.5}, lineColor = {128, 128, 128}, fillColor = {255, 255, 255}, fillPattern = FillPattern.HorizontalCylinder, extent = {{-25, -12.5}, {25, 12.5}}), Polygon(visible = true, origin = {-23.077, -0.385}, fillColor = {191, 191, 191}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, points = {{38.077, 50.385}, {38.077, 55.385}, {33.077, 55.385}, {-6.923, 55.385}, {-26.923, 45.385}, {-41.923, 30.385}, {-50.213, 0.385}, {-41.923, -29.615}, {-26.923, -44.615}, {-6.923, -54.615}, {33.077, -54.615}, {38.077, -54.615}, {38.077, -49.615}}, smooth = Smooth.Bezier), Polygon(visible = true, origin = {-17.857, -4.643}, lineColor = {128, 128, 128}, fillColor = {128, 128, 128}, points = {{42.857, 59.643}, {42.857, 64.643}, {37.857, 69.643}, {32.857, 69.643}, {-17.143, 69.643}, {-42.143, 54.643}, {-57.143, 34.643}, {-65.22199999999999, 4.643}, {-57.143, -25.357}, {-42.143, -45.357}, {-17.143, -60.357}, {32.857, -60.357}, {37.857, -60.357}, {42.857, -55.357}, {42.857, -50.357}}, smooth = Smooth.Bezier)}), Diagram(coordinateSystem(extent = {{-148.5, -105}, {148.5, 105}}, preserveAspectRatio = true, initialScale = 0.1, grid = {5, 5})), uses(Modelica_DeviceDrivers(version = "1.5.0"), Modelica(version = "3.2.2"))); -end OpenModelicaArduino;
\ No newline at end of file +end OpenModelicaArduino; |