diff options
Diffstat (limited to 'OpenModelicaArduino/Firmware/Tiva C/StandardFirmata/FirmataDefines.h')
| -rw-r--r-- | OpenModelicaArduino/Firmware/Tiva C/StandardFirmata/FirmataDefines.h | 283 |
1 files changed, 283 insertions, 0 deletions
diff --git a/OpenModelicaArduino/Firmware/Tiva C/StandardFirmata/FirmataDefines.h b/OpenModelicaArduino/Firmware/Tiva C/StandardFirmata/FirmataDefines.h new file mode 100644 index 0000000..fb95fb5 --- /dev/null +++ b/OpenModelicaArduino/Firmware/Tiva C/StandardFirmata/FirmataDefines.h @@ -0,0 +1,283 @@ +/* + FirmataDefines.h + Copyright (c) 2006-2008 Hans-Christoph Steiner. All rights reserved. + Copyright (C) 2009-2016 Jeff Hoefs. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + See file LICENSE.txt for further informations on licensing terms. +*/ + +#ifndef FirmataDefines_h +#define FirmataDefines_h + +#include "FirmataConstants.h" + +/* Version numbers for the Firmata library. + * The firmware version will not always equal the protocol version going forward. + * Query using the REPORT_FIRMWARE message. + */ +#define FIRMATA_FIRMWARE_MAJOR_VERSION firmata::FIRMWARE_MAJOR_VERSION +#define FIRMATA_FIRMWARE_MINOR_VERSION firmata::FIRMWARE_MINOR_VERSION +#define FIRMATA_FIRMWARE_BUGFIX_VERSION firmata::FIRMWARE_BUGFIX_VERSION + +/* Version numbers for the protocol. The protocol is still changing, so these + * version numbers are important. + * Query using the REPORT_VERSION message. + */ +#define FIRMATA_PROTOCOL_MAJOR_VERSION firmata::PROTOCOL_MAJOR_VERSION // for non-compatible changes +#define FIRMATA_PROTOCOL_MINOR_VERSION firmata::PROTOCOL_MINOR_VERSION // for backwards compatible changes +#define FIRMATA_PROTOCOL_BUGFIX_VERSION firmata::PROTOCOL_BUGFIX_VERSION // for bugfix releases + +#ifdef MAX_DATA_BYTES +#undef MAX_DATA_BYTES +#endif +#define MAX_DATA_BYTES firmata::MAX_DATA_BYTES // max number of data bytes in incoming messages + +// message command bytes (128-255/0x80-0xFF) + +#ifdef DIGITAL_MESSAGE +#undef DIGITAL_MESSAGE +#endif +#define DIGITAL_MESSAGE firmata::DIGITAL_MESSAGE // send data for a digital port (collection of 8 pins) + +#ifdef ANALOG_MESSAGE +#undef ANALOG_MESSAGE +#endif +#define ANALOG_MESSAGE firmata::ANALOG_MESSAGE // send data for an analog pin (or PWM) + +#ifdef REPORT_ANALOG +#undef REPORT_ANALOG +#endif +#define REPORT_ANALOG firmata::REPORT_ANALOG // enable analog input by pin # + +#ifdef REPORT_DIGITAL +#undef REPORT_DIGITAL +#endif +#define REPORT_DIGITAL firmata::REPORT_DIGITAL // enable digital input by port pair + +// + +#ifdef SET_PIN_MODE +#undef SET_PIN_MODE +#endif +#define SET_PIN_MODE firmata::SET_PIN_MODE // set a pin to INPUT/OUTPUT/PWM/etc + +#ifdef SET_DIGITAL_PIN_VALUE +#undef SET_DIGITAL_PIN_VALUE +#endif +#define SET_DIGITAL_PIN_VALUE firmata::SET_DIGITAL_PIN_VALUE // set value of an individual digital pin + +// + +#ifdef REPORT_VERSION +#undef REPORT_VERSION +#endif +#define REPORT_VERSION firmata::REPORT_VERSION // report protocol version + +#ifdef SYSTEM_RESET +#undef SYSTEM_RESET +#endif +#define SYSTEM_RESET firmata::SYSTEM_RESET // reset from MIDI + +// + +#ifdef START_SYSEX +#undef START_SYSEX +#endif +#define START_SYSEX firmata::START_SYSEX // start a MIDI Sysex message + +#ifdef END_SYSEX +#undef END_SYSEX +#endif +#define END_SYSEX firmata::END_SYSEX // end a MIDI Sysex message + +// extended command set using sysex (0-127/0x00-0x7F) +/* 0x00-0x0F reserved for user-defined commands */ + +#ifdef SERIAL_MESSAGE +#undef SERIAL_MESSAGE +#endif +#define SERIAL_MESSAGE firmata::SERIAL_DATA // communicate with serial devices, including other boards + +#ifdef ENCODER_DATA +#undef ENCODER_DATA +#endif +#define ENCODER_DATA firmata::ENCODER_DATA // reply with encoders current positions + +#ifdef SERVO_CONFIG +#undef SERVO_CONFIG +#endif +#define SERVO_CONFIG firmata::SERVO_CONFIG // set max angle, minPulse, maxPulse, freq + +#ifdef STRING_DATA +#undef STRING_DATA +#endif +#define STRING_DATA firmata::STRING_DATA // a string message with 14-bits per char + +#ifdef STEPPER_DATA +#undef STEPPER_DATA +#endif +#define STEPPER_DATA firmata::STEPPER_DATA // control a stepper motor + +#ifdef ONEWIRE_DATA +#undef ONEWIRE_DATA +#endif +#define ONEWIRE_DATA firmata::ONEWIRE_DATA // send an OneWire read/write/reset/select/skip/search request + +#ifdef SHIFT_DATA +#undef SHIFT_DATA +#endif +#define SHIFT_DATA firmata::SHIFT_DATA // a bitstream to/from a shift register + +#ifdef I2C_REQUEST +#undef I2C_REQUEST +#endif +#define I2C_REQUEST firmata::I2C_REQUEST // send an I2C read/write request + +#ifdef I2C_REPLY +#undef I2C_REPLY +#endif +#define I2C_REPLY firmata::I2C_REPLY // a reply to an I2C read request + +#ifdef I2C_CONFIG +#undef I2C_CONFIG +#endif +#define I2C_CONFIG firmata::I2C_CONFIG // config I2C settings such as delay times and power pins + +#ifdef REPORT_FIRMWARE +#undef REPORT_FIRMWARE +#endif +#define REPORT_FIRMWARE firmata::REPORT_FIRMWARE // report name and version of the firmware + +#ifdef EXTENDED_ANALOG +#undef EXTENDED_ANALOG +#endif +#define EXTENDED_ANALOG firmata::EXTENDED_ANALOG // analog write (PWM, Servo, etc) to any pin + +#ifdef PIN_STATE_QUERY +#undef PIN_STATE_QUERY +#endif +#define PIN_STATE_QUERY firmata::PIN_STATE_QUERY // ask for a pin's current mode and value + +#ifdef PIN_STATE_RESPONSE +#undef PIN_STATE_RESPONSE +#endif +#define PIN_STATE_RESPONSE firmata::PIN_STATE_RESPONSE // reply with pin's current mode and value + +#ifdef CAPABILITY_QUERY +#undef CAPABILITY_QUERY +#endif +#define CAPABILITY_QUERY firmata::CAPABILITY_QUERY // ask for supported modes and resolution of all pins + +#ifdef CAPABILITY_RESPONSE +#undef CAPABILITY_RESPONSE +#endif +#define CAPABILITY_RESPONSE firmata::CAPABILITY_RESPONSE // reply with supported modes and resolution + +#ifdef ANALOG_MAPPING_QUERY +#undef ANALOG_MAPPING_QUERY +#endif +#define ANALOG_MAPPING_QUERY firmata::ANALOG_MAPPING_QUERY // ask for mapping of analog to pin numbers + +#ifdef ANALOG_MAPPING_RESPONSE +#undef ANALOG_MAPPING_RESPONSE +#endif +#define ANALOG_MAPPING_RESPONSE firmata::ANALOG_MAPPING_RESPONSE // reply with mapping info + +#ifdef SAMPLING_INTERVAL +#undef SAMPLING_INTERVAL +#endif +#define SAMPLING_INTERVAL firmata::SAMPLING_INTERVAL // set the poll rate of the main loop + +#ifdef SCHEDULER_DATA +#undef SCHEDULER_DATA +#endif +#define SCHEDULER_DATA firmata::SCHEDULER_DATA // send a createtask/deletetask/addtotask/schedule/querytasks/querytask request to the scheduler + +#ifdef SYSEX_NON_REALTIME +#undef SYSEX_NON_REALTIME +#endif +#define SYSEX_NON_REALTIME firmata::SYSEX_NON_REALTIME // MIDI Reserved for non-realtime messages + +#ifdef SYSEX_REALTIME +#undef SYSEX_REALTIME +#endif +#define SYSEX_REALTIME firmata::SYSEX_REALTIME // MIDI Reserved for realtime messages + +// pin modes + +#ifdef PIN_MODE_INPUT +#undef PIN_MODE_INPUT +#endif +#define PIN_MODE_INPUT firmata::PIN_MODE_INPUT // same as INPUT defined in Arduino.h + +#ifdef PIN_MODE_OUTPUT +#undef PIN_MODE_OUTPUT +#endif +#define PIN_MODE_OUTPUT firmata::PIN_MODE_OUTPUT // same as OUTPUT defined in Arduino.h + +#ifdef PIN_MODE_ANALOG +#undef PIN_MODE_ANALOG +#endif +#define PIN_MODE_ANALOG firmata::PIN_MODE_ANALOG // analog pin in analogInput mode + +#ifdef PIN_MODE_PWM +#undef PIN_MODE_PWM +#endif +#define PIN_MODE_PWM firmata::PIN_MODE_PWM // digital pin in PWM output mode + +#ifdef PIN_MODE_SERVO +#undef PIN_MODE_SERVO +#endif +#define PIN_MODE_SERVO firmata::PIN_MODE_SERVO // digital pin in Servo output mode + +#ifdef PIN_MODE_SHIFT +#undef PIN_MODE_SHIFT +#endif +#define PIN_MODE_SHIFT firmata::PIN_MODE_SHIFT // shiftIn/shiftOut mode + +#ifdef PIN_MODE_I2C +#undef PIN_MODE_I2C +#endif +#define PIN_MODE_I2C firmata::PIN_MODE_I2C // pin included in I2C setup + +#ifdef PIN_MODE_ONEWIRE +#undef PIN_MODE_ONEWIRE +#endif +#define PIN_MODE_ONEWIRE firmata::PIN_MODE_ONEWIRE // pin configured for 1-wire + +#ifdef PIN_MODE_STEPPER +#undef PIN_MODE_STEPPER +#endif +#define PIN_MODE_STEPPER firmata::PIN_MODE_STEPPER // pin configured for stepper motor + +#ifdef PIN_MODE_ENCODER +#undef PIN_MODE_ENCODER +#endif +#define PIN_MODE_ENCODER firmata::PIN_MODE_ENCODER // pin configured for rotary encoders + +#ifdef PIN_MODE_SERIAL +#undef PIN_MODE_SERIAL +#endif +#define PIN_MODE_SERIAL firmata::PIN_MODE_SERIAL // pin configured for serial communication + +#ifdef PIN_MODE_PULLUP +#undef PIN_MODE_PULLUP +#endif +#define PIN_MODE_PULLUP firmata::PIN_MODE_PULLUP // enable internal pull-up resistor for pin + +#ifdef PIN_MODE_IGNORE +#undef PIN_MODE_IGNORE +#endif +#define PIN_MODE_IGNORE firmata::PIN_MODE_IGNORE // pin configured to be ignored by digitalWrite and capabilityResponse + +#ifdef TOTAL_PIN_MODES +#undef TOTAL_PIN_MODES +#endif +#define TOTAL_PIN_MODES firmata::TOTAL_PIN_MODES + +#endif // FirmataConstants_h |