diff options
Diffstat (limited to 'OpenModelicaArduino/Firmware/Tiva C/StandardFirmata/FirmataConstants.h')
| -rw-r--r-- | OpenModelicaArduino/Firmware/Tiva C/StandardFirmata/FirmataConstants.h | 97 |
1 files changed, 0 insertions, 97 deletions
diff --git a/OpenModelicaArduino/Firmware/Tiva C/StandardFirmata/FirmataConstants.h b/OpenModelicaArduino/Firmware/Tiva C/StandardFirmata/FirmataConstants.h deleted file mode 100644 index e8d2181..0000000 --- a/OpenModelicaArduino/Firmware/Tiva C/StandardFirmata/FirmataConstants.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - FirmataConstants.h - Copyright (c) 2006-2008 Hans-Christoph Steiner. All rights reserved. - Copyright (C) 2009-2017 Jeff Hoefs. All rights reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - See file LICENSE.txt for further informations on licensing terms. -*/ - -#ifndef FirmataConstants_h -#define FirmataConstants_h - -namespace firmata { -/* Version numbers for the Firmata library. - * The firmware version will not always equal the protocol version going forward. - * Query using the REPORT_FIRMWARE message. - */ -static const int FIRMWARE_MAJOR_VERSION = 2; -static const int FIRMWARE_MINOR_VERSION = 5; -static const int FIRMWARE_BUGFIX_VERSION = 6; - -/* Version numbers for the protocol. The protocol is still changing, so these - * version numbers are important. - * Query using the REPORT_VERSION message. - */ -static const int PROTOCOL_MAJOR_VERSION = 2; // for non-compatible changes -static const int PROTOCOL_MINOR_VERSION = 5; // for backwards compatible changes -static const int PROTOCOL_BUGFIX_VERSION = 1; // for bugfix releases - -static const int MAX_DATA_BYTES = 64; // max number of data bytes in incoming messages - -// message command bytes (128-255/0x80-0xFF) - -static const int DIGITAL_MESSAGE = 0x90; // send data for a digital port (collection of 8 pins) -static const int ANALOG_MESSAGE = 0xE0; // send data for an analog pin (or PWM) -static const int REPORT_ANALOG = 0xC0; // enable analog input by pin # -static const int REPORT_DIGITAL = 0xD0; // enable digital input by port pair -// -static const int SET_PIN_MODE = 0xF4; // set a pin to INPUT/OUTPUT/PWM/etc -static const int SET_DIGITAL_PIN_VALUE = 0xF5; // set value of an individual digital pin -// -static const int REPORT_VERSION = 0xF9; // report protocol version -static const int SYSTEM_RESET = 0xFF; // reset from MIDI -// -static const int START_SYSEX = 0xF0; // start a MIDI Sysex message -static const int END_SYSEX = 0xF7; // end a MIDI Sysex message - -// extended command set using sysex (0-127/0x00-0x7F) -/* 0x00-0x0F reserved for user-defined commands */ - -static const int SERIAL_DATA = 0x60; // communicate with serial devices, including other boards -static const int ENCODER_DATA = 0x61; // reply with encoders current positions -static const int SERVO_CONFIG = 0x70; // set max angle, minPulse, maxPulse, freq -static const int STRING_DATA = 0x71; // a string message with 14-bits per char -static const int STEPPER_DATA = 0x72; // control a stepper motor -static const int ONEWIRE_DATA = 0x73; // send an OneWire read/write/reset/select/skip/search request -static const int SHIFT_DATA = 0x75; // a bitstream to/from a shift register -static const int I2C_REQUEST = 0x76; // send an I2C read/write request -static const int I2C_REPLY = 0x77; // a reply to an I2C read request -static const int I2C_CONFIG = 0x78; // config I2C settings such as delay times and power pins -static const int REPORT_FIRMWARE = 0x79; // report name and version of the firmware -static const int EXTENDED_ANALOG = 0x6F; // analog write (PWM, Servo, etc) to any pin -static const int PIN_STATE_QUERY = 0x6D; // ask for a pin's current mode and value -static const int PIN_STATE_RESPONSE = 0x6E; // reply with pin's current mode and value -static const int CAPABILITY_QUERY = 0x6B; // ask for supported modes and resolution of all pins -static const int CAPABILITY_RESPONSE = 0x6C; // reply with supported modes and resolution -static const int ANALOG_MAPPING_QUERY = 0x69; // ask for mapping of analog to pin numbers -static const int ANALOG_MAPPING_RESPONSE = 0x6A; // reply with mapping info -static const int SAMPLING_INTERVAL = 0x7A; // set the poll rate of the main loop -static const int SCHEDULER_DATA = 0x7B; // send a createtask/deletetask/addtotask/schedule/querytasks/querytask request to the scheduler -static const int SYSEX_NON_REALTIME = 0x7E; // MIDI Reserved for non-realtime messages -static const int SYSEX_REALTIME = 0x7F; // MIDI Reserved for realtime messages - -// pin modes -static const int PIN_MODE_INPUT = 0x00; // same as INPUT defined in Arduino.h -static const int PIN_MODE_OUTPUT = 0x01; // same as OUTPUT defined in Arduino.h -static const int PIN_MODE_ANALOG = 0x02; // analog pin in analogInput mode -static const int PIN_MODE_PWM = 0x03; // digital pin in PWM output mode -static const int PIN_MODE_SERVO = 0x04; // digital pin in Servo output mode -static const int PIN_MODE_SHIFT = 0x05; // shiftIn/shiftOut mode -static const int PIN_MODE_I2C = 0x06; // pin included in I2C setup -static const int PIN_MODE_ONEWIRE = 0x07; // pin configured for 1-wire -static const int PIN_MODE_STEPPER = 0x08; // pin configured for stepper motor -static const int PIN_MODE_ENCODER = 0x09; // pin configured for rotary encoders -static const int PIN_MODE_SERIAL = 0x0A; // pin configured for serial communication -static const int PIN_MODE_PULLUP = 0x0B; // enable internal pull-up resistor for pin -static const int PIN_MODE_IGNORE = 0x7F; // pin configured to be ignored by digitalWrite and capabilityResponse - -static const int TOTAL_PIN_MODES = 13; - -} // namespace firmata - -#endif // FirmataConstants_h |