Updated OSP-plugin

1 files changed, 276 insertions, 0 deletions

diff --git a/Other_Arduino_Codes/TwoNema17-2DM542-OSP-Plugin-Test/TwoNema17-2DM542-OSP-Plugin-Test.ino b/Other_Arduino_Codes/TwoNema17-2DM542-OSP-Plugin-Test/TwoNema17-2DM542-OSP-Plugin-Test.ino
new file mode 100644
index 0000000..e70195a
--- /dev/null
+++ b/Other_Arduino_Codes/TwoNema17-2DM542-OSP-Plugin-Test/TwoNema17-2DM542-OSP-Plugin-Test.ino
@@ -0,0 +1,276 @@
+#include <stdio.h>
+#include <string.h>
+#include <math.h>
+//#include "CoordsLib.h"
+#include "OSP.h"
+// step dir enable 
+// 10 11 12 7 8 9 
+// Declarations for stepper motor 1 (at the base)
+#define dir1 11
+#define step1 10
+//int ms1_1=10;
+//int ms1_2=11;
+//int ms1_3=12;
+#define enable1 12
+
+// Declarations for stepper motor 2 (at the top holding the laser)
+#define dir2 8 
+#define step2 7 
+//int ms2_1=7;
+//int ms2_2=8;
+//int ms2_3=9;
+#define enable2 9
+//int ResolutionPin = 12;
+
+#define ledPin 13 //  LED pin
+
+#define ddir1 0
+#define ddir2 0
+#define motor1 0
+#define motor2 0
+
+#define sensor1 A2
+#define sensor2 A3 
+
+/* 
+#define pulPin 10 // step of stepper motor 
+#define dirPin  11 // direction of stepper motor 
+#define pulPin1 3
+#define dirPin1 4
+#define enblPin1 5
+
+#define ledPin 13
+#define ddir1 0
+#define ddir2 0
+#define motor1 0
+#define motor2 0
+
+#define sensor1 7
+#define sensor2 8
+
+*/
+
+/**
+ * Output pin to control the laser pointer
+ */
+int laserPin = 6;
+
+
+/**
+ * Library for control the device: stepper motors, sensors, current position..
+ */
+OSP Axes = OSP();
+
+//Axes.pulPin =10;
+//Axes.dirPin = 11;
+//Axes.enblPin = 12;
+//Axes.pulPin1 = 3;
+//Axes.dirPin1 = 4;
+//Axes.enblPin1 = 5;
+//Axes.ledPin = 13;
+//Axes.ddir1;
+//Axes.ddir2;
+//
+//Axes.motor1;
+//Axes.motor2;
+
+/**
+ * Initializes the serial port and sets pins to control the device
+ */
+ String m_data,sac_data,salt_data;
+ void(* resetFunc) (void) = 0;
+void setup(){
+	Serial.begin(9600);
+        //myservo.attach(9,500,2100);///ATTACH servo
+	//Serial.println("init");
+	
+  pinMode(laserPin, OUTPUT);
+  //pinMode(ResolutionPin, OUTPUT);
+  //digitalWrite(ResolutionPin,HIGH);
+	laserOff();
+
+  pinMode(sensor1, INPUT);
+  pinMode(sensor2, INPUT);
+
+  Axes.setMotorsPins(dir1, step1, enable1, dir2, step2, enable2, ledPin, ddir1, ddir2, motor1, motor2, sensor1,sensor2);
+	
+	//Axes.setMotorsPins(pulPin, dirPin, enblPin, pulPin1, dirPin1, enblPin1, ledPin, ddir1, ddir2, motor1, motor2, sensor1,sensor2);
+ 
+	}
+
+/**
+ * Turn the laser On
+ */
+void laserOn(int intensity){
+analogWrite(laserPin, intensity);
+}
+
+/**
+ * Turn the laser Off
+ */
+void laserOff(){
+	digitalWrite(laserPin, LOW);
+}
+
+void getAcAlt(){
+  char bytes[40];
+  //char *m,*sac,*salt;
+  //String m_data,sac_data,salt_data;
+  int nbytes = 0;
+  bool recv=false;
+  while(!recv){
+    //Serial.println(recv);
+  while(nbytes < 17){
+    //Serial.println("Inside nbytes");Serial.println(nbytes);
+    if(Serial.available() > 0){
+      bytes[nbytes] = Serial.read();
+      nbytes++;
+    }
+    //Serial.println(bytes);
+    recv=true;
+  }
+  }
+
+ 
+
+  ///*################################
+  //     movem_-4.5434_-2.5254
+ //Serial.println(bytes);
+
+String data= String(bytes);
+data.trim();
+int len=data.length();
+//Serial.println(data);
+//Serial.println(len);
+//data.remove(17,len-11);
+//Serial.println("-----------");
+//Serial.println(data);
+//delay(20);
+m_data=data;
+sac_data=data;
+salt_data=data;
+
+m_data.remove(1,len-1);
+//Serial.println(m_data);
+
+sac_data.remove(0,2);
+len=sac_data.length();
+//Serial.println(len);
+sac_data.remove(7,len-7);
+
+
+len=salt_data.length();
+//Serial.println(len);
+
+salt_data=salt_data.substring(10,17);
+
+
+}
+
+
+void loop(){
+  float ac, alt;
+  char comm[5];
+  char dir;
+  int bytes_recv = 0;
+  bool mov_end;
+  int ret;                                                      //Added to check val of PX
+  comm[4]='\0';
+  while(bytes_recv < 4){
+    //Waiting for a command...
+    if (Serial.available() > 0)
+      comm[bytes_recv++] = Serial.read();
+      
+  }
+  if(strcmp(comm, "move")==0){
+   //delay(10); 
+    //Serial.println("float");
+    Serial.println("float");
+    getAcAlt();
+        Serial.println("done_move");
+   Axes.goToRads(sac_data.toFloat(),salt_data.toFloat());
+  }
+  if(strcmp(comm, "movl")==0){
+    mov_end=Axes.movx(false,step1,dir1); // mov_end=Axes.movx(false,pulPin,dirPin);
+    if(mov_end)
+    Serial.println("done_movl");
+  }	
+  else if(strcmp(comm, "movr")==0){
+    mov_end=Axes.movx(true,step1,dir1); // mov_end=Axes.movx(true,pulPin,dirPin);
+      if(mov_end)
+        Serial.println("done_movr");
+  }    
+  else if(strcmp(comm, "movu")==0){
+    mov_end=Axes.movy(false,step2,dir2); // mov_end=Axes.movy(false,pulPin1,dirPin1);
+    if(mov_end)
+      Serial.println("done_movu");
+  }
+  else if(strcmp(comm, "movd")==0){
+    mov_end=Axes.movy(true,step2,dir2); // mov_end=Axes.movy(true,pulPin1,dirPin1);
+    if(mov_end)//==false)
+      Serial.println("done_movd");
+  }
+  else if(strcmp(comm, "init")==0){
+    Axes.init();
+    Serial.println("done_init");
+  }else if(strcmp(comm, "laon")==0){
+    laserOn(50);
+    Serial.println("done_laon");
+  }else if(strcmp(comm, "loff")==0){
+    laserOff();		
+    Serial.println("done_loff");
+  }else if(strcmp(comm, "post")==0){
+    ac=Axes.getX();
+    alt=Axes.getY();
+    Serial.print("t_");
+    Serial.print(ac,6);
+    Serial.print("_");
+    Serial.println(alt,6);
+  }else if(strcmp(comm,"stop")==0){
+   //TODO: IF not detected inside the movx function create a function to stop movement 
+   Axes.stopper=1;
+  }
+  else if(strcmp(comm,"rest")==0){
+   resetFunc();  
+   }
+  else if(strcmp(comm,"moff")==0){
+    digitalWrite(A0, HIGH);
+    delay(100);
+    digitalWrite(A1, HIGH);
+    delay(100);
+    Serial.println("done_motor_off");
+    
+  }
+  else if(strcmp(comm,"moon")==0){
+    digitalWrite(A0, LOW);
+    delay(100);
+    digitalWrite(A1, LOW);
+    delay(100);
+    Serial.println("done_motor_on");
+  }
+  else if(strcmp(comm,"lase")==0){
+    Serial.println("done_lase");
+    char bytes[40];
+    int nbytes = 0;
+  bool recv=false;
+  while(!recv){
+    //Serial.println(recv);
+  while(nbytes < 4){
+    //Serial.println("Inside nbytes");Serial.println(nbytes);
+    if(Serial.available() > 0){
+      bytes[nbytes] = Serial.read();
+      nbytes++;
+    }
+    //Serial.println(bytes);
+    recv=true;
+  }
+  }
+  String data= String(bytes);
+  int intensity=data.toInt();
+  laserOn(intensity);
+  }
+  else{ 
+  //Serial.println(comm);
+  }
+}
+