path: root/thirdparty1/linux/include/opencv2/imgproc/imgproc_c.h

/*M///////////////////////////////////////////////////////////////////////////////////////
//
//  IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
//
//  By downloading, copying, installing or using the software you agree to this license.
//  If you do not agree to this license, do not download, install,
//  copy or use the software.
//
//
//                           License Agreement
//                For Open Source Computer Vision Library
//
// Copyright (C) 2000-2008, Intel Corporation, all rights reserved.
// Copyright (C) 2009, Willow Garage Inc., all rights reserved.
// Third party copyrights are property of their respective owners.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//
//   * Redistribution's of source code must retain the above copyright notice,
//     this list of conditions and the following disclaimer.
//
//   * Redistribution's in binary form must reproduce the above copyright notice,
//     this list of conditions and the following disclaimer in the documentation
//     and/or other materials provided with the distribution.
//
//   * The name of the copyright holders may not be used to endorse or promote products
//     derived from this software without specific prior written permission.
//
// This software is provided by the copyright holders and contributors "as is" and
// any express or implied warranties, including, but not limited to, the implied
// warranties of merchantability and fitness for a particular purpose are disclaimed.
// In no event shall the Intel Corporation or contributors be liable for any direct,
// indirect, incidental, special, exemplary, or consequential damages
// (including, but not limited to, procurement of substitute goods or services;
// loss of use, data, or profits; or business interruption) however caused
// and on any theory of liability, whether in contract, strict liability,
// or tort (including negligence or otherwise) arising in any way out of
// the use of this software, even if advised of the possibility of such damage.
//
//M*/

#ifndef OPENCV_IMGPROC_IMGPROC_C_H
#define OPENCV_IMGPROC_IMGPROC_C_H

#include "opencv2/imgproc/types_c.h"

#ifdef __cplusplus
extern "C" {
#endif

/** @addtogroup imgproc_c
@{
*/

/*********************** Background statistics accumulation *****************************/

/** @brief Adds image to accumulator
@see cv::accumulate
*/
CVAPI(void)  cvAcc( const CvArr* image, CvArr* sum,
                   const CvArr* mask CV_DEFAULT(NULL) );

/** @brief Adds squared image to accumulator
@see cv::accumulateSquare
*/
CVAPI(void)  cvSquareAcc( const CvArr* image, CvArr* sqsum,
                         const CvArr* mask CV_DEFAULT(NULL) );

/** @brief Adds a product of two images to accumulator
@see cv::accumulateProduct
*/
CVAPI(void)  cvMultiplyAcc( const CvArr* image1, const CvArr* image2, CvArr* acc,
                           const CvArr* mask CV_DEFAULT(NULL) );

/** @brief Adds image to accumulator with weights: acc = acc*(1-alpha) + image*alpha
@see cv::accumulateWeighted
*/
CVAPI(void)  cvRunningAvg( const CvArr* image, CvArr* acc, double alpha,
                          const CvArr* mask CV_DEFAULT(NULL) );

/****************************************************************************************\
*                                    Image Processing                                    *
\****************************************************************************************/

/** Copies source 2D array inside of the larger destination array and
   makes a border of the specified type (IPL_BORDER_*) around the copied area. */
CVAPI(void) cvCopyMakeBorder( const CvArr* src, CvArr* dst, CvPoint offset,
                              int bordertype, CvScalar value CV_DEFAULT(cvScalarAll(0)));

/** @brief Smooths the image in one of several ways.

@param src The source image
@param dst The destination image
@param smoothtype Type of the smoothing, see SmoothMethod_c
@param size1 The first parameter of the smoothing operation, the aperture width. Must be a
positive odd number (1, 3, 5, ...)
@param size2 The second parameter of the smoothing operation, the aperture height. Ignored by
CV_MEDIAN and CV_BILATERAL methods. In the case of simple scaled/non-scaled and Gaussian blur if
size2 is zero, it is set to size1. Otherwise it must be a positive odd number.
@param sigma1 In the case of a Gaussian parameter this parameter may specify Gaussian \f$\sigma\f$
(standard deviation). If it is zero, it is calculated from the kernel size:
\f[\sigma  = 0.3 (n/2 - 1) + 0.8  \quad   \text{where}   \quad  n= \begin{array}{l l} \mbox{\texttt{size1} for horizontal kernel} \\ \mbox{\texttt{size2} for vertical kernel} \end{array}\f]
Using standard sigma for small kernels ( \f$3\times 3\f$ to \f$7\times 7\f$ ) gives better speed. If
sigma1 is not zero, while size1 and size2 are zeros, the kernel size is calculated from the
sigma (to provide accurate enough operation).
@param sigma2 additional parameter for bilateral filtering

@see cv::GaussianBlur, cv::blur, cv::medianBlur, cv::bilateralFilter.
 */
CVAPI(void) cvSmooth( const CvArr* src, CvArr* dst,
                      int smoothtype CV_DEFAULT(CV_GAUSSIAN),
                      int size1 CV_DEFAULT(3),
                      int size2 CV_DEFAULT(0),
                      double sigma1 CV_DEFAULT(0),
                      double sigma2 CV_DEFAULT(0));

/** @brief Convolves an image with the kernel.

@param src input image.
@param dst output image of the same size and the same number of channels as src.
@param kernel convolution kernel (or rather a correlation kernel), a single-channel floating point
matrix; if you want to apply different kernels to different channels, split the image into
separate color planes using split and process them individually.
@param anchor anchor of the kernel that indicates the relative position of a filtered point within
the kernel; the anchor should lie within the kernel; default value (-1,-1) means that the anchor
is at the kernel center.

@see cv::filter2D
 */
CVAPI(void) cvFilter2D( const CvArr* src, CvArr* dst, const CvMat* kernel,
                        CvPoint anchor CV_DEFAULT(cvPoint(-1,-1)));

/** @brief Finds integral image: SUM(X,Y) = sum(x<X,y<Y)I(x,y)
@see cv::integral
*/
CVAPI(void) cvIntegral( const CvArr* image, CvArr* sum,
                       CvArr* sqsum CV_DEFAULT(NULL),
                       CvArr* tilted_sum CV_DEFAULT(NULL));

/** @brief Smoothes the input image with gaussian kernel and then down-samples it.

   dst_width = floor(src_width/2)[+1],
   dst_height = floor(src_height/2)[+1]
   @see cv::pyrDown
*/
CVAPI(void)  cvPyrDown( const CvArr* src, CvArr* dst,
                        int filter CV_DEFAULT(CV_GAUSSIAN_5x5) );

/** @brief Up-samples image and smoothes the result with gaussian kernel.

   dst_width = src_width*2,
   dst_height = src_height*2
   @see cv::pyrUp
*/
CVAPI(void)  cvPyrUp( const CvArr* src, CvArr* dst,
                      int filter CV_DEFAULT(CV_GAUSSIAN_5x5) );

/** @brief Builds pyramid for an image
@see buildPyramid
*/
CVAPI(CvMat**) cvCreatePyramid( const CvArr* img, int extra_layers, double rate,
                                const CvSize* layer_sizes CV_DEFAULT(0),
                                CvArr* bufarr CV_DEFAULT(0),
                                int calc CV_DEFAULT(1),
                                int filter CV_DEFAULT(CV_GAUSSIAN_5x5) );

/** @brief Releases pyramid */
CVAPI(void)  cvReleasePyramid( CvMat*** pyramid, int extra_layers );


/** @brief Filters image using meanshift algorithm
@see cv::pyrMeanShiftFiltering
*/
CVAPI(void) cvPyrMeanShiftFiltering( const CvArr* src, CvArr* dst,
    double sp, double sr, int max_level CV_DEFAULT(1),
    CvTermCriteria termcrit CV_DEFAULT(cvTermCriteria(CV_TERMCRIT_ITER+CV_TERMCRIT_EPS,5,1)));

/** @brief Segments image using seed "markers"
@see cv::watershed
*/
CVAPI(void) cvWatershed( const CvArr* image, CvArr* markers );

/** @brief Calculates an image derivative using generalized Sobel

   (aperture_size = 1,3,5,7) or Scharr (aperture_size = -1) operator.
   Scharr can be used only for the first dx or dy derivative
@see cv::Sobel
*/
CVAPI(void) cvSobel( const CvArr* src, CvArr* dst,
                    int xorder, int yorder,
                    int aperture_size CV_DEFAULT(3));

/** @brief Calculates the image Laplacian: (d2/dx + d2/dy)I
@see cv::Laplacian
*/
CVAPI(void) cvLaplace( const CvArr* src, CvArr* dst,
                      int aperture_size CV_DEFAULT(3) );

/** @brief Converts input array pixels from one color space to another
@see cv::cvtColor
*/
CVAPI(void)  cvCvtColor( const CvArr* src, CvArr* dst, int code );


/** @brief Resizes image (input array is resized to fit the destination array)
@see cv::resize
*/
CVAPI(void)  cvResize( const CvArr* src, CvArr* dst,
                       int interpolation CV_DEFAULT( CV_INTER_LINEAR ));

/** @brief Warps image with affine transform
@note ::cvGetQuadrangleSubPix is similar to ::cvWarpAffine, but the outliers are extrapolated using
replication border mode.
@see cv::warpAffine
*/
CVAPI(void)  cvWarpAffine( const CvArr* src, CvArr* dst, const CvMat* map_matrix,
                           int flags CV_DEFAULT(CV_INTER_LINEAR+CV_WARP_FILL_OUTLIERS),
                           CvScalar fillval CV_DEFAULT(cvScalarAll(0)) );

/** @brief Computes affine transform matrix for mapping src[i] to dst[i] (i=0,1,2)
@see cv::getAffineTransform
*/
CVAPI(CvMat*) cvGetAffineTransform( const CvPoint2D32f * src,
                                    const CvPoint2D32f * dst,
                                    CvMat * map_matrix );

/** @brief Computes rotation_matrix matrix
@see cv::getRotationMatrix2D
*/
CVAPI(CvMat*)  cv2DRotationMatrix( CvPoint2D32f center, double angle,
                                   double scale, CvMat* map_matrix );

/** @brief Warps image with perspective (projective) transform
@see cv::warpPerspective
*/
CVAPI(void)  cvWarpPerspective( const CvArr* src, CvArr* dst, const CvMat* map_matrix,
                                int flags CV_DEFAULT(CV_INTER_LINEAR+CV_WARP_FILL_OUTLIERS),
                                CvScalar fillval CV_DEFAULT(cvScalarAll(0)) );

/** @brief Computes perspective transform matrix for mapping src[i] to dst[i] (i=0,1,2,3)
@see cv::getPerspectiveTransform
*/
CVAPI(CvMat*) cvGetPerspectiveTransform( const CvPoint2D32f* src,
                                         const CvPoint2D32f* dst,
                                         CvMat* map_matrix );

/** @brief Performs generic geometric transformation using the specified coordinate maps
@see cv::remap
*/
CVAPI(void)  cvRemap( const CvArr* src, CvArr* dst,
                      const CvArr* mapx, const CvArr* mapy,
                      int flags CV_DEFAULT(CV_INTER_LINEAR+CV_WARP_FILL_OUTLIERS),
                      CvScalar fillval CV_DEFAULT(cvScalarAll(0)) );

/** @brief Converts mapx & mapy from floating-point to integer formats for cvRemap
@see cv::convertMaps
*/
CVAPI(void)  cvConvertMaps( const CvArr* mapx, const CvArr* mapy,
                            CvArr* mapxy, CvArr* mapalpha );

/** @brief Performs forward or inverse log-polar image transform
@see cv::logPolar
*/
CVAPI(void)  cvLogPolar( const CvArr* src, CvArr* dst,
                         CvPoint2D32f center, double M,
                         int flags CV_DEFAULT(CV_INTER_LINEAR+CV_WARP_FILL_OUTLIERS));

/** Performs forward or inverse linear-polar image transform
@see cv::linearPolar
*/
CVAPI(void)  cvLinearPolar( const CvArr* src, CvArr* dst,
                         CvPoint2D32f center, double maxRadius,
                         int flags CV_DEFAULT(CV_INTER_LINEAR+CV_WARP_FILL_OUTLIERS));

/** @brief Transforms the input image to compensate lens distortion
@see cv::undistort
*/
CVAPI(void) cvUndistort2( const CvArr* src, CvArr* dst,
                          const CvMat* camera_matrix,
                          const CvMat* distortion_coeffs,
                          const CvMat* new_camera_matrix CV_DEFAULT(0) );

/** @brief Computes transformation map from intrinsic camera parameters
   that can used by cvRemap
*/
CVAPI(void) cvInitUndistortMap( const CvMat* camera_matrix,
                                const CvMat* distortion_coeffs,
                                CvArr* mapx, CvArr* mapy );

/** @brief Computes undistortion+rectification map for a head of stereo camera
@see cv::initUndistortRectifyMap
*/
CVAPI(void) cvInitUndistortRectifyMap( const CvMat* camera_matrix,
                                       const CvMat* dist_coeffs,
                                       const CvMat *R, const CvMat* new_camera_matrix,
                                       CvArr* mapx, CvArr* mapy );

/** @brief Computes the original (undistorted) feature coordinates
   from the observed (distorted) coordinates
@see cv::undistortPoints
*/
CVAPI(void) cvUndistortPoints( const CvMat* src, CvMat* dst,
                               const CvMat* camera_matrix,
                               const CvMat* dist_coeffs,
                               const CvMat* R CV_DEFAULT(0),
                               const CvMat* P CV_DEFAULT(0));

/** @brief Returns a structuring element of the specified size and shape for morphological operations.

@note the created structuring element IplConvKernel\* element must be released in the end using
`cvReleaseStructuringElement(&element)`.

@param cols Width of the structuring element
@param rows Height of the structuring element
@param anchor_x x-coordinate of the anchor
@param anchor_y y-coordinate of the anchor
@param shape element shape that could be one of the cv::MorphShapes_c
@param values integer array of cols*rows elements that specifies the custom shape of the
structuring element, when shape=CV_SHAPE_CUSTOM.

@see cv::getStructuringElement
 */
 CVAPI(IplConvKernel*)  cvCreateStructuringElementEx(
            int cols, int  rows, int  anchor_x, int  anchor_y,
            int shape, int* values CV_DEFAULT(NULL) );

/** @brief releases structuring element
@see cvCreateStructuringElementEx
*/
CVAPI(void)  cvReleaseStructuringElement( IplConvKernel** element );

/** @brief erodes input image (applies minimum filter) one or more times.
   If element pointer is NULL, 3x3 rectangular element is used
@see cv::erode
*/
CVAPI(void)  cvErode( const CvArr* src, CvArr* dst,
                      IplConvKernel* element CV_DEFAULT(NULL),
                      int iterations CV_DEFAULT(1) );

/** @brief dilates input image (applies maximum filter) one or more times.

   If element pointer is NULL, 3x3 rectangular element is used
@see cv::dilate
*/
CVAPI(void)  cvDilate( const CvArr* src, CvArr* dst,
                       IplConvKernel* element CV_DEFAULT(NULL),
                       int iterations CV_DEFAULT(1) );

/** @brief Performs complex morphological transformation
@see cv::morphologyEx
*/
CVAPI(void)  cvMorphologyEx( const CvArr* src, CvArr* dst,
                             CvArr* temp, IplConvKernel* element,
                             int operation, int iterations CV_DEFAULT(1) );

/** @brief Calculates all spatial and central moments up to the 3rd order
@see cv::moments
*/
CVAPI(void) cvMoments( const CvArr* arr, CvMoments* moments, int binary CV_DEFAULT(0));

/** @brief Retrieve spatial moments */
CVAPI(double)  cvGetSpatialMoment( CvMoments* moments, int x_order, int y_order );
/** @brief Retrieve central moments */
CVAPI(double)  cvGetCentralMoment( CvMoments* moments, int x_order, int y_order );
/** @brief Retrieve normalized central moments */
CVAPI(double)  cvGetNormalizedCentralMoment( CvMoments* moments,
                                             int x_order, int y_order );

/** @brief Calculates 7 Hu's invariants from precalculated spatial and central moments
@see cv::HuMoments
*/
CVAPI(void) cvGetHuMoments( CvMoments*  moments, CvHuMoments*  hu_moments );

/*********************************** data sampling **************************************/

/** @brief Fetches pixels that belong to the specified line segment and stores them to the buffer.

   Returns the number of retrieved points.
@see cv::LineSegmentDetector
*/
CVAPI(int)  cvSampleLine( const CvArr* image, CvPoint pt1, CvPoint pt2, void* buffer,
                          int connectivity CV_DEFAULT(8));

/** @brief Retrieves the rectangular image region with specified center from the input array.

 dst(x,y) <- src(x + center.x - dst_width/2, y + center.y - dst_height/2).
 Values of pixels with fractional coordinates are retrieved using bilinear interpolation
@see cv::getRectSubPix
*/
CVAPI(void)  cvGetRectSubPix( const CvArr* src, CvArr* dst, CvPoint2D32f center );


/** @brief Retrieves quadrangle from the input array.

    matrixarr = ( a11  a12 | b1 )   dst(x,y) <- src(A[x y]' + b)
                ( a21  a22 | b2 )   (bilinear interpolation is used to retrieve pixels
                                     with fractional coordinates)
@see cvWarpAffine
*/
CVAPI(void)  cvGetQuadrangleSubPix( const CvArr* src, CvArr* dst,
                                    const CvMat* map_matrix );

/** @brief Measures similarity between template and overlapped windows in the source image
   and fills the resultant image with the measurements
@see cv::matchTemplate
*/
CVAPI(void)  cvMatchTemplate( const CvArr* image, const CvArr* templ,
                              CvArr* result, int method );

/** @brief Computes earth mover distance between
   two weighted point sets (called signatures)
@see cv::EMD
*/
CVAPI(float)  cvCalcEMD2( const CvArr* signature1,
                          const CvArr* signature2,
                          int distance_type,
                          CvDistanceFunction distance_func CV_DEFAULT(NULL),
                          const CvArr* cost_matrix CV_DEFAULT(NULL),
                          CvArr* flow CV_DEFAULT(NULL),
                          float* lower_bound CV_DEFAULT(NULL),
                          void* userdata CV_DEFAULT(NULL));

/****************************************************************************************\
*                              Contours retrieving                                       *
\****************************************************************************************/

/** @brief Retrieves outer and optionally inner boundaries of white (non-zero) connected
   components in the black (zero) background
@see cv::findContours, cvStartFindContours, cvFindNextContour, cvSubstituteContour, cvEndFindContours
*/
CVAPI(int)  cvFindContours( CvArr* image, CvMemStorage* storage, CvSeq** first_contour,
                            int header_size CV_DEFAULT(sizeof(CvContour)),
                            int mode CV_DEFAULT(CV_RETR_LIST),
                            int method CV_DEFAULT(CV_CHAIN_APPROX_SIMPLE),
                            CvPoint offset CV_DEFAULT(cvPoint(0,0)));

/** @brief Initializes contour retrieving process.

   Calls cvStartFindContours.
   Calls cvFindNextContour until null pointer is returned
   or some other condition becomes true.
   Calls cvEndFindContours at the end.
@see cvFindContours
*/
CVAPI(CvContourScanner)  cvStartFindContours( CvArr* image, CvMemStorage* storage,
                            int header_size CV_DEFAULT(sizeof(CvContour)),
                            int mode CV_DEFAULT(CV_RETR_LIST),
                            int method CV_DEFAULT(CV_CHAIN_APPROX_SIMPLE),
                            CvPoint offset CV_DEFAULT(cvPoint(0,0)));

/** @brief Retrieves next contour
@see cvFindContours
*/
CVAPI(CvSeq*)  cvFindNextContour( CvContourScanner scanner );


/** @brief Substitutes the last retrieved contour with the new one

   (if the substitutor is null, the last retrieved contour is removed from the tree)
@see cvFindContours
*/
CVAPI(void)   cvSubstituteContour( CvContourScanner scanner, CvSeq* new_contour );


/** @brief Releases contour scanner and returns pointer to the first outer contour
@see cvFindContours
*/
CVAPI(CvSeq*)  cvEndFindContours( CvContourScanner* scanner );

/** @brief Approximates Freeman chain(s) with a polygonal curve.

This is a standalone contour approximation routine, not represented in the new interface. When
cvFindContours retrieves contours as Freeman chains, it calls the function to get approximated
contours, represented as polygons.

@param src_seq Pointer to the approximated Freeman chain that can refer to other chains.
@param storage Storage location for the resulting polylines.
@param method Approximation method (see the description of the function :ocvFindContours ).
@param parameter Method parameter (not used now).
@param minimal_perimeter Approximates only those contours whose perimeters are not less than
minimal_perimeter . Other chains are removed from the resulting structure.
@param recursive Recursion flag. If it is non-zero, the function approximates all chains that can
be obtained from chain by using the h_next or v_next links. Otherwise, the single input chain is
approximated.
@see cvStartReadChainPoints, cvReadChainPoint
 */
CVAPI(CvSeq*) cvApproxChains( CvSeq* src_seq, CvMemStorage* storage,
                            int method CV_DEFAULT(CV_CHAIN_APPROX_SIMPLE),
                            double parameter CV_DEFAULT(0),
                            int  minimal_perimeter CV_DEFAULT(0),
                            int  recursive CV_DEFAULT(0));

/** @brief Initializes Freeman chain reader.

   The reader is used to iteratively get coordinates of all the chain points.
   If the Freeman codes should be read as is, a simple sequence reader should be used
@see cvApproxChains
*/
CVAPI(void) cvStartReadChainPoints( CvChain* chain, CvChainPtReader* reader );

/** @brief Retrieves the next chain point
@see cvApproxChains
*/
CVAPI(CvPoint) cvReadChainPoint( CvChainPtReader* reader );


/****************************************************************************************\
*                            Contour Processing and Shape Analysis                       *
\****************************************************************************************/

/** @brief Approximates a single polygonal curve (contour) or
   a tree of polygonal curves (contours)
@see cv::approxPolyDP
*/
CVAPI(CvSeq*)  cvApproxPoly( const void* src_seq,
                             int header_size, CvMemStorage* storage,
                             int method, double eps,
                             int recursive CV_DEFAULT(0));

/** @brief Calculates perimeter of a contour or length of a part of contour
@see cv::arcLength
*/
CVAPI(double)  cvArcLength( const void* curve,
                            CvSlice slice CV_DEFAULT(CV_WHOLE_SEQ),
                            int is_closed CV_DEFAULT(-1));

/** same as cvArcLength for closed contour
*/
CV_INLINE double cvContourPerimeter( const void* contour )
{
    return cvArcLength( contour, CV_WHOLE_SEQ, 1 );
}


/** @brief Calculates contour bounding rectangle (update=1) or
   just retrieves pre-calculated rectangle (update=0)
@see cv::boundingRect
*/
CVAPI(CvRect)  cvBoundingRect( CvArr* points, int update CV_DEFAULT(0) );

/** @brief Calculates area of a contour or contour segment
@see cv::contourArea
*/
CVAPI(double)  cvContourArea( const CvArr* contour,
                              CvSlice slice CV_DEFAULT(CV_WHOLE_SEQ),
                              int oriented CV_DEFAULT(0));

/** @brief Finds minimum area rotated rectangle bounding a set of points
@see cv::minAreaRect
*/
CVAPI(CvBox2D)  cvMinAreaRect2( const CvArr* points,
                                CvMemStorage* storage CV_DEFAULT(NULL));

/** @brief Finds minimum enclosing circle for a set of points
@see cv::minEnclosingCircle
*/
CVAPI(int)  cvMinEnclosingCircle( const CvArr* points,
                                  CvPoint2D32f* center, float* radius );

/** @brief Compares two contours by matching their moments
@see cv::matchShapes
*/
CVAPI(double)  cvMatchShapes( const void* object1, const void* object2,
                              int method, double parameter CV_DEFAULT(0));

/** @brief Calculates exact convex hull of 2d point set
@see cv::convexHull
*/
CVAPI(CvSeq*) cvConvexHull2( const CvArr* input,
                             void* hull_storage CV_DEFAULT(NULL),
                             int orientation CV_DEFAULT(CV_CLOCKWISE),
                             int return_points CV_DEFAULT(0));

/** @brief Checks whether the contour is convex or not (returns 1 if convex, 0 if not)
@see cv::isContourConvex
*/
CVAPI(int)  cvCheckContourConvexity( const CvArr* contour );


/** @brief Finds convexity defects for the contour
@see cv::convexityDefects
*/
CVAPI(CvSeq*)  cvConvexityDefects( const CvArr* contour, const CvArr* convexhull,
                                   CvMemStorage* storage CV_DEFAULT(NULL));

/** @brief Fits ellipse into a set of 2d points
@see cv::fitEllipse
*/
CVAPI(CvBox2D) cvFitEllipse2( const CvArr* points );

/** @brief Finds minimum rectangle containing two given rectangles */
CVAPI(CvRect)  cvMaxRect( const CvRect* rect1, const CvRect* rect2 );

/** @brief Finds coordinates of the box vertices */
CVAPI(void) cvBoxPoints( CvBox2D box, CvPoint2D32f pt[4] );

/** @brief Initializes sequence header for a matrix (column or row vector) of points

   a wrapper for cvMakeSeqHeaderForArray (it does not initialize bounding rectangle!!!) */
CVAPI(CvSeq*) cvPointSeqFromMat( int seq_kind, const CvArr* mat,
                                 CvContour* contour_header,
                                 CvSeqBlock* block );

/** @brief Checks whether the point is inside polygon, outside, on an edge (at a vertex).

   Returns positive, negative or zero value, correspondingly.
   Optionally, measures a signed distance between
   the point and the nearest polygon edge (measure_dist=1)
@see cv::pointPolygonTest
*/
CVAPI(double) cvPointPolygonTest( const CvArr* contour,
                                  CvPoint2D32f pt, int measure_dist );

/****************************************************************************************\
*                                  Histogram functions                                   *
\****************************************************************************************/

/** @brief Creates a histogram.

The function creates a histogram of the specified size and returns a pointer to the created
histogram. If the array ranges is 0, the histogram bin ranges must be specified later via the
function cvSetHistBinRanges. Though cvCalcHist and cvCalcBackProject may process 8-bit images
without setting bin ranges, they assume they are equally spaced in 0 to 255 bins.

@param dims Number of histogram dimensions.
@param sizes Array of the histogram dimension sizes.
@param type Histogram representation format. CV_HIST_ARRAY means that the histogram data is
represented as a multi-dimensional dense array CvMatND. CV_HIST_SPARSE means that histogram data
is represented as a multi-dimensional sparse array CvSparseMat.
@param ranges Array of ranges for the histogram bins. Its meaning depends on the uniform parameter
value. The ranges are used when the histogram is calculated or backprojected to determine which
histogram bin corresponds to which value/tuple of values from the input image(s).
@param uniform Uniformity flag. If not zero, the histogram has evenly spaced bins and for every
\f$0<=i<cDims\f$ ranges[i] is an array of two numbers: lower and upper boundaries for the i-th
histogram dimension. The whole range [lower,upper] is then split into dims[i] equal parts to
determine the i-th input tuple value ranges for every histogram bin. And if uniform=0 , then the
i-th element of the ranges array contains dims[i]+1 elements: \f$\texttt{lower}_0,
\texttt{upper}_0, \texttt{lower}_1, \texttt{upper}_1 = \texttt{lower}_2,
...
\texttt{upper}_{dims[i]-1}\f$ where \f$\texttt{lower}_j\f$ and \f$\texttt{upper}_j\f$ are lower
and upper boundaries of the i-th input tuple value for the j-th bin, respectively. In either
case, the input values that are beyond the specified range for a histogram bin are not counted
by cvCalcHist and filled with 0 by cvCalcBackProject.
 */
CVAPI(CvHistogram*)  cvCreateHist( int dims, int* sizes, int type,
                                   float** ranges CV_DEFAULT(NULL),
                                   int uniform CV_DEFAULT(1));

/** @brief Sets the bounds of the histogram bins.

This is a standalone function for setting bin ranges in the histogram. For a more detailed
description of the parameters ranges and uniform, see the :ocvCalcHist function that can initialize
the ranges as well. Ranges for the histogram bins must be set before the histogram is calculated or
the backproject of the histogram is calculated.

@param hist Histogram.
@param ranges Array of bin ranges arrays. See :ocvCreateHist for details.
@param uniform Uniformity flag. See :ocvCreateHist for details.
 */
CVAPI(void)  cvSetHistBinRanges( CvHistogram* hist, float** ranges,
                                int uniform CV_DEFAULT(1));

/** @brief Makes a histogram out of an array.

The function initializes the histogram, whose header and bins are allocated by the user.
cvReleaseHist does not need to be called afterwards. Only dense histograms can be initialized this
way. The function returns hist.

@param dims Number of the histogram dimensions.
@param sizes Array of the histogram dimension sizes.
@param hist Histogram header initialized by the function.
@param data Array used to store histogram bins.
@param ranges Histogram bin ranges. See cvCreateHist for details.
@param uniform Uniformity flag. See cvCreateHist for details.
 */
CVAPI(CvHistogram*)  cvMakeHistHeaderForArray(
                            int  dims, int* sizes, CvHistogram* hist,
                            float* data, float** ranges CV_DEFAULT(NULL),
                            int uniform CV_DEFAULT(1));

/** @brief Releases the histogram.

The function releases the histogram (header and the data). The pointer to the histogram is cleared
by the function. If \*hist pointer is already NULL, the function does nothing.

@param hist Double pointer to the released histogram.
 */
CVAPI(void)  cvReleaseHist( CvHistogram** hist );

/** @brief Clears the histogram.

The function sets all of the histogram bins to 0 in case of a dense histogram and removes all
histogram bins in case of a sparse array.

@param hist Histogram.
 */
CVAPI(void)  cvClearHist( CvHistogram* hist );

/** @brief Finds the minimum and maximum histogram bins.

The function finds the minimum and maximum histogram bins and their positions. All of output
arguments are optional. Among several extremas with the same value the ones with the minimum index
(in the lexicographical order) are returned. In case of several maximums or minimums, the earliest
in the lexicographical order (extrema locations) is returned.

@param hist Histogram.
@param min_value Pointer to the minimum value of the histogram.
@param max_value Pointer to the maximum value of the histogram.
@param min_idx Pointer to the array of coordinates for the minimum.
@param max_idx Pointer to the array of coordinates for the maximum.
 */
CVAPI(void)  cvGetMinMaxHistValue( const CvHistogram* hist,
                                   float* min_value, float* max_value,
                                   int* min_idx CV_DEFAULT(NULL),
                                   int* max_idx CV_DEFAULT(NULL));


/** @brief Normalizes the histogram.

The function normalizes the histogram bins by scaling them so that the sum of the bins becomes equal
to factor.

@param hist Pointer to the histogram.
@param factor Normalization factor.
 */
CVAPI(void)  cvNormalizeHist( CvHistogram* hist, double factor );


/** @brief Thresholds the histogram.

The function clears histogram bins that are below the specified threshold.

@param hist Pointer to the histogram.
@param threshold Threshold level.
 */
CVAPI(void)  cvThreshHist( CvHistogram* hist, double threshold );


/** Compares two histogram */
CVAPI(double)  cvCompareHist( const CvHistogram* hist1,
                              const CvHistogram* hist2,
                              int method);

/** @brief Copies a histogram.

The function makes a copy of the histogram. If the second histogram pointer \*dst is NULL, a new
histogram of the same size as src is created. Otherwise, both histograms must have equal types and
sizes. Then the function copies the bin values of the source histogram to the destination histogram
and sets the same bin value ranges as in src.

@param src Source histogram.
@param dst Pointer to the destination histogram.
 */
CVAPI(void)  cvCopyHist( const CvHistogram* src, CvHistogram** dst );


/** @brief Calculates bayesian probabilistic histograms
   (each or src and dst is an array of _number_ histograms */
CVAPI(void)  cvCalcBayesianProb( CvHistogram** src, int number,
                                CvHistogram** dst);

/** @brief Calculates array histogram
@see cv::calcHist
*/
CVAPI(void)  cvCalcArrHist( CvArr** arr, CvHistogram* hist,
                            int accumulate CV_DEFAULT(0),
                            const CvArr* mask CV_DEFAULT(NULL) );

/** @overload */
CV_INLINE  void  cvCalcHist( IplImage** image, CvHistogram* hist,
                             int accumulate CV_DEFAULT(0),
                             const CvArr* mask CV_DEFAULT(NULL) )
{
    cvCalcArrHist( (CvArr**)image, hist, accumulate, mask );
}

/** @brief Calculates back project
@see cvCalcBackProject, cv::calcBackProject
*/
CVAPI(void)  cvCalcArrBackProject( CvArr** image, CvArr* dst,
                                   const CvHistogram* hist );

#define  cvCalcBackProject(image, dst, hist) cvCalcArrBackProject((CvArr**)image, dst, hist)


/** @brief Locates a template within an image by using a histogram comparison.

The function calculates the back projection by comparing histograms of the source image patches with
the given histogram. The function is similar to matchTemplate, but instead of comparing the raster
patch with all its possible positions within the search window, the function CalcBackProjectPatch
compares histograms. See the algorithm diagram below:

![image](pics/backprojectpatch.png)

@param image Source images (though, you may pass CvMat\*\* as well).
@param dst Destination image.
@param range
@param hist Histogram.
@param method Comparison method passed to cvCompareHist (see the function description).
@param factor Normalization factor for histograms that affects the normalization scale of the
destination image. Pass 1 if not sure.

@see cvCalcBackProjectPatch
 */
CVAPI(void)  cvCalcArrBackProjectPatch( CvArr** image, CvArr* dst, CvSize range,
                                        CvHistogram* hist, int method,
                                        double factor );

#define  cvCalcBackProjectPatch( image, dst, range, hist, method, factor ) \
     cvCalcArrBackProjectPatch( (CvArr**)image, dst, range, hist, method, factor )


/** @brief Divides one histogram by another.

The function calculates the object probability density from two histograms as:

\f[\texttt{disthist} (I)= \forkthree{0}{if \(\texttt{hist1}(I)=0\)}{\texttt{scale}}{if \(\texttt{hist1}(I) \ne 0\) and \(\texttt{hist2}(I) > \texttt{hist1}(I)\)}{\frac{\texttt{hist2}(I) \cdot \texttt{scale}}{\texttt{hist1}(I)}}{if \(\texttt{hist1}(I) \ne 0\) and \(\texttt{hist2}(I) \le \texttt{hist1}(I)\)}\f]

@param hist1 First histogram (the divisor).
@param hist2 Second histogram.
@param dst_hist Destination histogram.
@param scale Scale factor for the destination histogram.
 */
CVAPI(void)  cvCalcProbDensity( const CvHistogram* hist1, const CvHistogram* hist2,
                                CvHistogram* dst_hist, double scale CV_DEFAULT(255) );

/** @brief equalizes histogram of 8-bit single-channel image
@see cv::equalizeHist
*/
CVAPI(void)  cvEqualizeHist( const CvArr* src, CvArr* dst );


/** @brief Applies distance transform to binary image
@see cv::distanceTransform
*/
CVAPI(void)  cvDistTransform( const CvArr* src, CvArr* dst,
                              int distance_type CV_DEFAULT(CV_DIST_L2),
                              int mask_size CV_DEFAULT(3),
                              const float* mask CV_DEFAULT(NULL),
                              CvArr* labels CV_DEFAULT(NULL),
                              int labelType CV_DEFAULT(CV_DIST_LABEL_CCOMP));


/** @brief Applies fixed-level threshold to grayscale image.

   This is a basic operation applied before retrieving contours
@see cv::threshold
*/
CVAPI(double)  cvThreshold( const CvArr*  src, CvArr*  dst,
                            double  threshold, double  max_value,
                            int threshold_type );

/** @brief Applies adaptive threshold to grayscale image.

   The two parameters for methods CV_ADAPTIVE_THRESH_MEAN_C and
   CV_ADAPTIVE_THRESH_GAUSSIAN_C are:
   neighborhood size (3, 5, 7 etc.),
   and a constant subtracted from mean (...,-3,-2,-1,0,1,2,3,...)
@see cv::adaptiveThreshold
*/
CVAPI(void)  cvAdaptiveThreshold( const CvArr* src, CvArr* dst, double max_value,
                                  int adaptive_method CV_DEFAULT(CV_ADAPTIVE_THRESH_MEAN_C),
                                  int threshold_type CV_DEFAULT(CV_THRESH_BINARY),
                                  int block_size CV_DEFAULT(3),
                                  double param1 CV_DEFAULT(5));

/** @brief Fills the connected component until the color difference gets large enough
@see cv::floodFill
*/
CVAPI(void)  cvFloodFill( CvArr* image, CvPoint seed_point,
                          CvScalar new_val, CvScalar lo_diff CV_DEFAULT(cvScalarAll(0)),
                          CvScalar up_diff CV_DEFAULT(cvScalarAll(0)),
                          CvConnectedComp* comp CV_DEFAULT(NULL),
                          int flags CV_DEFAULT(4),
                          CvArr* mask CV_DEFAULT(NULL));

/****************************************************************************************\
*                                  Feature detection                                     *
\****************************************************************************************/

/** @brief Runs canny edge detector
@see cv::Canny
*/
CVAPI(void)  cvCanny( const CvArr* image, CvArr* edges, double threshold1,
                      double threshold2, int  aperture_size CV_DEFAULT(3) );

/** @brief Calculates constraint image for corner detection

   Dx^2 * Dyy + Dxx * Dy^2 - 2 * Dx * Dy * Dxy.
   Applying threshold to the result gives coordinates of corners
@see cv::preCornerDetect
*/
CVAPI(void) cvPreCornerDetect( const CvArr* image, CvArr* corners,
                               int aperture_size CV_DEFAULT(3) );

/** @brief Calculates eigen values and vectors of 2x2
   gradient covariation matrix at every image pixel
@see cv::cornerEigenValsAndVecs
*/
CVAPI(void)  cvCornerEigenValsAndVecs( const CvArr* image, CvArr* eigenvv,
                                       int block_size, int aperture_size CV_DEFAULT(3) );

/** @brief Calculates minimal eigenvalue for 2x2 gradient covariation matrix at
   every image pixel
@see cv::cornerMinEigenVal
*/
CVAPI(void)  cvCornerMinEigenVal( const CvArr* image, CvArr* eigenval,
                                  int block_size, int aperture_size CV_DEFAULT(3) );

/** @brief Harris corner detector:

   Calculates det(M) - k*(trace(M)^2), where M is 2x2 gradient covariation matrix for each pixel
@see cv::cornerHarris
*/
CVAPI(void)  cvCornerHarris( const CvArr* image, CvArr* harris_response,
                             int block_size, int aperture_size CV_DEFAULT(3),
                             double k CV_DEFAULT(0.04) );

/** @brief Adjust corner position using some sort of gradient search
@see cv::cornerSubPix
*/
CVAPI(void)  cvFindCornerSubPix( const CvArr* image, CvPoint2D32f* corners,
                                 int count, CvSize win, CvSize zero_zone,
                                 CvTermCriteria  criteria );

/** @brief Finds a sparse set of points within the selected region
   that seem to be easy to track
@see cv::goodFeaturesToTrack
*/
CVAPI(void)  cvGoodFeaturesToTrack( const CvArr* image, CvArr* eig_image,
                                    CvArr* temp_image, CvPoint2D32f* corners,
                                    int* corner_count, double  quality_level,
                                    double  min_distance,
                                    const CvArr* mask CV_DEFAULT(NULL),
                                    int block_size CV_DEFAULT(3),
                                    int use_harris CV_DEFAULT(0),
                                    double k CV_DEFAULT(0.04) );

/** @brief Finds lines on binary image using one of several methods.

   line_storage is either memory storage or 1 x _max number of lines_ CvMat, its
   number of columns is changed by the function.
   method is one of CV_HOUGH_*;
   rho, theta and threshold are used for each of those methods;
   param1 ~ line length, param2 ~ line gap - for probabilistic,
   param1 ~ srn, param2 ~ stn - for multi-scale
@see cv::HoughLines
*/
CVAPI(CvSeq*)  cvHoughLines2( CvArr* image, void* line_storage, int method,
                              double rho, double theta, int threshold,
                              double param1 CV_DEFAULT(0), double param2 CV_DEFAULT(0),
                              double min_theta CV_DEFAULT(0), double max_theta CV_DEFAULT(CV_PI));

/** @brief Finds circles in the image
@see cv::HoughCircles
*/
CVAPI(CvSeq*) cvHoughCircles( CvArr* image, void* circle_storage,
                              int method, double dp, double min_dist,
                              double param1 CV_DEFAULT(100),
                              double param2 CV_DEFAULT(100),
                              int min_radius CV_DEFAULT(0),
                              int max_radius CV_DEFAULT(0));

/** @brief Fits a line into set of 2d or 3d points in a robust way (M-estimator technique)
@see cv::fitLine
*/
CVAPI(void)  cvFitLine( const CvArr* points, int dist_type, double param,
                        double reps, double aeps, float* line );

/****************************************************************************************\
*                                     Drawing                                            *
\****************************************************************************************/

/****************************************************************************************\
*       Drawing functions work with images/matrices of arbitrary type.                   *
*       For color images the channel order is BGR[A]                                     *
*       Antialiasing is supported only for 8-bit image now.                              *
*       All the functions include parameter color that means rgb value (that may be      *
*       constructed with CV_RGB macro) for color images and brightness                   *
*       for grayscale images.                                                            *
*       If a drawn figure is partially or completely outside of the image, it is clipped.*
\****************************************************************************************/

#define CV_RGB( r, g, b )  cvScalar( (b), (g), (r), 0 )
#define CV_FILLED -1

#define CV_AA 16

/** @brief Draws 4-connected, 8-connected or antialiased line segment connecting two points
@see cv::line
*/
CVAPI(void)  cvLine( CvArr* img, CvPoint pt1, CvPoint pt2,
                     CvScalar color, int thickness CV_DEFAULT(1),
                     int line_type CV_DEFAULT(8), int shift CV_DEFAULT(0) );

/** @brief Draws a rectangle given two opposite corners of the rectangle (pt1 & pt2)

   if thickness<0 (e.g. thickness == CV_FILLED), the filled box is drawn
@see cv::rectangle
*/
CVAPI(void)  cvRectangle( CvArr* img, CvPoint pt1, CvPoint pt2,
                          CvScalar color, int thickness CV_DEFAULT(1),
                          int line_type CV_DEFAULT(8),
                          int shift CV_DEFAULT(0));

/** @brief Draws a rectangle specified by a CvRect structure
@see cv::rectangle
*/
CVAPI(void)  cvRectangleR( CvArr* img, CvRect r,
                           CvScalar color, int thickness CV_DEFAULT(1),
                           int line_type CV_DEFAULT(8),
                           int shift CV_DEFAULT(0));


/** @brief Draws a circle with specified center and radius.

   Thickness works in the same way as with cvRectangle
@see cv::circle
*/
CVAPI(void)  cvCircle( CvArr* img, CvPoint center, int radius,
                       CvScalar color, int thickness CV_DEFAULT(1),
                       int line_type CV_DEFAULT(8), int shift CV_DEFAULT(0));

/** @brief Draws ellipse outline, filled ellipse, elliptic arc or filled elliptic sector

   depending on _thickness_, _start_angle_ and _end_angle_ parameters. The resultant figure
   is rotated by _angle_. All the angles are in degrees
@see cv::ellipse
*/
CVAPI(void)  cvEllipse( CvArr* img, CvPoint center, CvSize axes,
                        double angle, double start_angle, double end_angle,
                        CvScalar color, int thickness CV_DEFAULT(1),
                        int line_type CV_DEFAULT(8), int shift CV_DEFAULT(0));

CV_INLINE  void  cvEllipseBox( CvArr* img, CvBox2D box, CvScalar color,
                               int thickness CV_DEFAULT(1),
                               int line_type CV_DEFAULT(8), int shift CV_DEFAULT(0) )
{
    CvSize axes;
    axes.width = cvRound(box.size.width*0.5);
    axes.height = cvRound(box.size.height*0.5);

    cvEllipse( img, cvPointFrom32f( box.center ), axes, box.angle,
               0, 360, color, thickness, line_type, shift );
}

/** @brief Fills convex or monotonous polygon.
@see cv::fillConvexPoly
*/
CVAPI(void)  cvFillConvexPoly( CvArr* img, const CvPoint* pts, int npts, CvScalar color,
                               int line_type CV_DEFAULT(8), int shift CV_DEFAULT(0));

/** @brief Fills an area bounded by one or more arbitrary polygons
@see cv::fillPoly
*/
CVAPI(void)  cvFillPoly( CvArr* img, CvPoint** pts, const int* npts,
                         int contours, CvScalar color,
                         int line_type CV_DEFAULT(8), int shift CV_DEFAULT(0) );

/** @brief Draws one or more polygonal curves
@see cv::polylines
*/
CVAPI(void)  cvPolyLine( CvArr* img, CvPoint** pts, const int* npts, int contours,
                         int is_closed, CvScalar color, int thickness CV_DEFAULT(1),
                         int line_type CV_DEFAULT(8), int shift CV_DEFAULT(0) );

#define cvDrawRect cvRectangle
#define cvDrawLine cvLine
#define cvDrawCircle cvCircle
#define cvDrawEllipse cvEllipse
#define cvDrawPolyLine cvPolyLine

/** @brief Clips the line segment connecting *pt1 and *pt2
   by the rectangular window

   (0<=x<img_size.width, 0<=y<img_size.height).
@see cv::clipLine
*/
CVAPI(int) cvClipLine( CvSize img_size, CvPoint* pt1, CvPoint* pt2 );

/** @brief Initializes line iterator.

Initially, line_iterator->ptr will point to pt1 (or pt2, see left_to_right description) location in
the image. Returns the number of pixels on the line between the ending points.
@see cv::LineIterator
*/
CVAPI(int)  cvInitLineIterator( const CvArr* image, CvPoint pt1, CvPoint pt2,
                                CvLineIterator* line_iterator,
                                int connectivity CV_DEFAULT(8),
                                int left_to_right CV_DEFAULT(0));

#define CV_NEXT_LINE_POINT( line_iterator )                     \
{                                                               \
    int _line_iterator_mask = (line_iterator).err < 0 ? -1 : 0; \
    (line_iterator).err += (line_iterator).minus_delta +        \
        ((line_iterator).plus_delta & _line_iterator_mask);     \
    (line_iterator).ptr += (line_iterator).minus_step +         \
        ((line_iterator).plus_step & _line_iterator_mask);      \
}


#define CV_FONT_HERSHEY_SIMPLEX         0
#define CV_FONT_HERSHEY_PLAIN           1
#define CV_FONT_HERSHEY_DUPLEX          2
#define CV_FONT_HERSHEY_COMPLEX         3
#define CV_FONT_HERSHEY_TRIPLEX         4
#define CV_FONT_HERSHEY_COMPLEX_SMALL   5
#define CV_FONT_HERSHEY_SCRIPT_SIMPLEX  6
#define CV_FONT_HERSHEY_SCRIPT_COMPLEX  7

#define CV_FONT_ITALIC                 16

#define CV_FONT_VECTOR0    CV_FONT_HERSHEY_SIMPLEX


/** Font structure */
typedef struct CvFont
{
  const char* nameFont;   //Qt:nameFont
  CvScalar color;       //Qt:ColorFont -> cvScalar(blue_component, green_component, red_component[, alpha_component])
    int         font_face;    //Qt: bool italic         /** =CV_FONT_* */
    const int*  ascii;      //!< font data and metrics
    const int*  greek;
    const int*  cyrillic;
    float       hscale, vscale;
    float       shear;      //!< slope coefficient: 0 - normal, >0 - italic
    int         thickness;    //!< Qt: weight               /** letters thickness */
    float       dx;       //!< horizontal interval between letters
    int         line_type;    //!< Qt: PointSize
}
CvFont;

/** @brief Initializes font structure (OpenCV 1.x API).

The function initializes the font structure that can be passed to text rendering functions.

@param font Pointer to the font structure initialized by the function
@param font_face Font name identifier. See cv::HersheyFonts and corresponding old CV_* identifiers.
@param hscale Horizontal scale. If equal to 1.0f , the characters have the original width
depending on the font type. If equal to 0.5f , the characters are of half the original width.
@param vscale Vertical scale. If equal to 1.0f , the characters have the original height depending
on the font type. If equal to 0.5f , the characters are of half the original height.
@param shear Approximate tangent of the character slope relative to the vertical line. A zero
value means a non-italic font, 1.0f means about a 45 degree slope, etc.
@param thickness Thickness of the text strokes
@param line_type Type of the strokes, see line description

@sa cvPutText
 */
CVAPI(void)  cvInitFont( CvFont* font, int font_face,
                         double hscale, double vscale,
                         double shear CV_DEFAULT(0),
                         int thickness CV_DEFAULT(1),
                         int line_type CV_DEFAULT(8));

CV_INLINE CvFont cvFont( double scale, int thickness CV_DEFAULT(1) )
{
    CvFont font;
    cvInitFont( &font, CV_FONT_HERSHEY_PLAIN, scale, scale, 0, thickness, CV_AA );
    return font;
}

/** @brief Renders text stroke with specified font and color at specified location.
   CvFont should be initialized with cvInitFont
@see cvInitFont, cvGetTextSize, cvFont, cv::putText
*/
CVAPI(void)  cvPutText( CvArr* img, const char* text, CvPoint org,
                        const CvFont* font, CvScalar color );

/** @brief Calculates bounding box of text stroke (useful for alignment)
@see cv::getTextSize
*/
CVAPI(void)  cvGetTextSize( const char* text_string, const CvFont* font,
                            CvSize* text_size, int* baseline );

/** @brief Unpacks color value

if arrtype is CV_8UC?, _color_ is treated as packed color value, otherwise the first channels
(depending on arrtype) of destination scalar are set to the same value = _color_
*/
CVAPI(CvScalar)  cvColorToScalar( double packed_color, int arrtype );

/** @brief Returns the polygon points which make up the given ellipse.

The ellipse is define by the box of size 'axes' rotated 'angle' around the 'center'. A partial
sweep of the ellipse arc can be done by spcifying arc_start and arc_end to be something other than
0 and 360, respectively. The input array 'pts' must be large enough to hold the result. The total
number of points stored into 'pts' is returned by this function.
@see cv::ellipse2Poly
*/
CVAPI(int) cvEllipse2Poly( CvPoint center, CvSize axes,
                 int angle, int arc_start, int arc_end, CvPoint * pts, int delta );

/** @brief Draws contour outlines or filled interiors on the image
@see cv::drawContours
*/
CVAPI(void)  cvDrawContours( CvArr *img, CvSeq* contour,
                             CvScalar external_color, CvScalar hole_color,
                             int max_level, int thickness CV_DEFAULT(1),
                             int line_type CV_DEFAULT(8),
                             CvPoint offset CV_DEFAULT(cvPoint(0,0)));

/** @} */

#ifdef __cplusplus
}
#endif

#endif