1 files changed, 44 insertions, 0 deletions
diff --git a/tools/env/README b/tools/env/README
new file mode 100755
index 0000000..d8386f7
--- /dev/null
+++ b/tools/env/README
@@ -0,0 +1,44 @@
+
+This is a demo implementation of a Linux command line tool to access
+the U-Boot's environment variables.
+
+For the run-time utiltity configuration uncomment the line
+#define CONFIG_FILE  "/etc/fw_env.config"
+in fw_env.h.
+
+See comments in the fw_env.config file for definitions for the
+particular board.
+
+Configuration can also be done via #defines in the fw_env.h file. The
+following lines are relevant:
+
+#define HAVE_REDUND	/* For systems with 2 env sectors */
+#define DEVICE1_NAME	"/dev/mtd1"
+#define DEVICE2_NAME	"/dev/mtd2"
+#define DEVICE1_OFFSET    0x0000
+#define ENV1_SIZE         0x4000
+#define DEVICE1_ESIZE     0x4000
+#define DEVICE2_OFFSET    0x0000
+#define ENV2_SIZE         0x4000
+#define DEVICE2_ESIZE     0x4000
+
+Current configuration matches the environment layout of the TRAB
+board.
+
+Un-define HAVE_REDUND, if you want to use the utlities on a system
+that does not have support for redundant environment enabled.
+If HAVE_REDUND is undefined, DEVICE2_NAME is ignored,
+as is ENV2_SIZE and DEVICE2_ESIZE.
+
+The DEVICEx_NAME constants define which MTD character devices are to
+be used to access the environment.
+
+The DEVICEx_OFFSET constants define the environment offset within the
+MTD character device.
+
+ENVx_SIZE defines the size in bytes taken by the environment, which
+may be less then flash sector size, if the environment takes less
+then 1 sector.
+
+DEVICEx_ESIZE defines the size of the first sector in the flash
+partition where the environment resides.