diff options
Diffstat (limited to 'common/cmd_spi.c')
| -rwxr-xr-x | common/cmd_spi.c | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/common/cmd_spi.c b/common/cmd_spi.c new file mode 100755 index 0000000..a6fdf7f --- /dev/null +++ b/common/cmd_spi.c @@ -0,0 +1,143 @@ +/* + * (C) Copyright 2002 + * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * SPI Read/Write Utilities + */ + +#include <common.h> +#include <command.h> +#include <spi.h> + +#if (CONFIG_COMMANDS & CFG_CMD_SPI) + +/*----------------------------------------------------------------------- + * Definitions + */ + +#ifndef MAX_SPI_BYTES +# define MAX_SPI_BYTES 32 /* Maximum number of bytes we can handle */ +#endif + +/* + * External table of chip select functions (see the appropriate board + * support for the actual definition of the table). + */ +extern spi_chipsel_type spi_chipsel[]; +extern int spi_chipsel_cnt; + +/* + * Values from last command. + */ +static int device; +static int bitlen; +static uchar dout[MAX_SPI_BYTES]; +static uchar din[MAX_SPI_BYTES]; + +/* + * SPI read/write + * + * Syntax: + * spi {dev} {num_bits} {dout} + * {dev} is the device number for controlling chip select (see TBD) + * {num_bits} is the number of bits to send & receive (base 10) + * {dout} is a hexadecimal string of data to send + * The command prints out the hexadecimal string received via SPI. + */ + +int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + char *cp = 0; + uchar tmp; + int j; + int rcode = 0; + + /* + * We use the last specified parameters, unless new ones are + * entered. + */ + + if ((flag & CMD_FLAG_REPEAT) == 0) + { + if (argc >= 2) + device = simple_strtoul(argv[1], NULL, 10); + if (argc >= 3) + bitlen = simple_strtoul(argv[2], NULL, 10); + if (argc >= 4) { + cp = argv[3]; + for(j = 0; *cp; j++, cp++) { + tmp = *cp - '0'; + if(tmp > 9) + tmp -= ('A' - '0') - 10; + if(tmp > 15) + tmp -= ('a' - 'A'); + if(tmp > 15) { + printf("Hex conversion error on %c, giving up.\n", *cp); + return 1; + } + if((j % 2) == 0) + dout[j / 2] = (tmp << 4); + else + dout[j / 2] |= tmp; + } + } + } + + if ((device < 0) || (device >= spi_chipsel_cnt)) { + printf("Invalid device %d, giving up.\n", device); + return 1; + } + if ((bitlen < 0) || (bitlen > (MAX_SPI_BYTES * 8))) { + printf("Invalid bitlen %d, giving up.\n", bitlen); + return 1; + } + + debug ("spi_chipsel[%d] = %08X\n", + device, (uint)spi_chipsel[device]); + + if(spi_xfer(spi_chipsel[device], bitlen, dout, din) != 0) { + printf("Error with the SPI transaction.\n"); + rcode = 1; + } else { + cp = (char *)din; + for(j = 0; j < ((bitlen + 7) / 8); j++) { + printf("%02X", *cp++); + } + printf("\n"); + } + + return rcode; +} + +/***************************************************/ + +U_BOOT_CMD( + sspi, 5, 1, do_spi, + "sspi - SPI utility commands\n", + "<device> <bit_len> <dout> - Send <bit_len> bits from <dout> out the SPI\n" + "<device> - Identifies the chip select of the device\n" + "<bit_len> - Number of bits to send (base 10)\n" + "<dout> - Hexadecimal string that gets sent\n" +); + +#endif /* CFG_CMD_SPI */ |