diff options
Diffstat (limited to 'board/wmt/usb_uhci.c')
| -rwxr-xr-x | board/wmt/usb_uhci.c | 1303 |
1 files changed, 1303 insertions, 0 deletions
diff --git a/board/wmt/usb_uhci.c b/board/wmt/usb_uhci.c new file mode 100755 index 0000000..6a2fb2d --- /dev/null +++ b/board/wmt/usb_uhci.c @@ -0,0 +1,1303 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Note: Part of this code has been derived from linux + * + */ + +/********************************************************************** + * How it works: + * ------------- + * The framelist / Transfer descriptor / Queue Heads are similar like + * in the linux usb_uhci.c. + * + * During initialization, the following skeleton is allocated in init_skel: + * + * framespecific | common chain + * + * framelist[] + * [ 0 ]-----> TD ---------\ + * [ 1 ]-----> TD ----------> TD ------> QH -------> QH -------> QH ---> NULL + * ... TD ---------/ + * [1023]-----> TD --------/ + * + * ^^ ^^ ^^ ^^ ^^ + * 7 TDs for 1 TD for Start of Start of End Chain + * INT (2-128ms) 1ms-INT CTRL Chain BULK Chain + * + * + * Since this is a bootloader, the isochronous transfer descriptor have been removed. + * + * Interrupt Transfers. + * -------------------- + * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They + * will be inserted after the appropriate (depending the interval setting) skeleton TD. + * If an interrupt has been detected the dev->irqhandler is called. The status and number + * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the + * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned, + * the interrupt TD will be reactivated. + * + * Control Transfers + * ----------------- + * Control Transfers are issued by filling the tmp_td with the appropriate data and connect + * them to the qh_cntrl queue header. Before other control/bulk transfers can be issued, + * the programm has to wait for completion. This does not allows asynchronous data transfer. + * + * Bulk Transfers + * -------------- + * Bulk Transfers are issued by filling the tmp_td with the appropriate data and connect + * them to the qh_bulk queue header. Before other control/bulk transfers can be issued, + * the programm has to wait for completion. This does not allows asynchronous data transfer. + * + * + */ + +#include <common.h> +#include <pci.h> + + +#ifdef CONFIG_USB_UHCI + +#include "env.h" +#include <usb.h> +#include "usb_uhci.h" +#define USB_MAX_TEMP_TD 512 /* number of temporary TDs for bulk and control transfers */ +#define USB_MAX_TEMP_INT_TD 32 /* number of temporary TDs for Interrupt transfers */ +extern struct IC_REG *pIc0_Reg; +extern struct IC_REG *pIc1_Reg; +extern void free(void*); +extern int usb_flag; +/*#define USB_UHCI_DEBUG*/ +#ifdef USB_UHCI_DEBUG +#define USB_UHCI_PRINTF(fmt,args...) printf (fmt ,##args) +static int usb_display_td(uhci_td_t *td); + +#else +#define USB_UHCI_PRINTF(fmt,args...) +#endif + +#define BA_UHCI_PCI 0xD8007A00 /* USB 1.1 1st UHCI USB Host Configuration Base Address */ +#define BA_UHCI_REG 0xD8007B00 /* USB 1.1 1st UHCI USB Host Register Base Address */ +#define BA_UHCI2_PCI 0xD8008C00 /* USB 1.1 2nd UHCI USB Host Configuration Base Address */ +#define BA_UHCI2_REG 0xD8008D00 /* USB 1.1 2nd UHCI USB Host Register Base Address */ +extern int wmt_read_ostc(int *val); +unsigned int usb_base_addr = BA_UHCI_REG; /* base address */ +extern unsigned char usb_sel; + + uhci_td_t td_int[8] __attribute__((aligned(128))); /* Interrupt Transfer descriptors */ + uhci_qh_t qh_cntrl __attribute__((aligned(128))); /* control Queue Head */ + uhci_qh_t qh_bulk __attribute__((aligned(128))); /* bulk Queue Head */ + uhci_qh_t qh_end __attribute__((aligned(128))); /* end Queue Head */ + uhci_td_t td_last __attribute__((aligned(128))); /* last TD (linked with end chain) */ +/* temporary tds */ + uhci_td_t tmp_td[USB_MAX_TEMP_TD] __attribute__((aligned(128))); /* temporary bulk/control td's */ + uhci_td_t tmp_int_td[USB_MAX_TEMP_INT_TD] __attribute__((aligned(128))); /* temporary interrupt td's */ +unsigned long framelist[1024] __attribute__ ((aligned (0x1000))); /* frame list */ + +static struct virt_root_hub rh; /* struct for root hub */ + +/********************************************************************** + * some forward decleration + */ +int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, + void *buffer, int transfer_len,struct devrequest *setup); + +/* fill a td with the approproiate data. Link, status, info and buffer + * are used by the USB controller itselfes, dev is used to identify the + * "connected" device + */ +void usb_fill_td(uhci_td_t* td,unsigned long link,unsigned long status, + unsigned long info, unsigned long buffer, unsigned long dev) +{ + //USB_UHCI_PRINTF("%s\n",__FUNCTION__); + + td->link=swap_32(link); + td->status=swap_32(status); + td->info=swap_32(info); + td->buffer=swap_32(buffer); + td->dev_ptr=dev; +} + +/* fill a qh with the approproiate data. Head and element are used by the USB controller + * itselfes. As soon as a valid dev_ptr is filled, a td chain is connected to the qh. + * Please note, that after completion of the td chain, the entry element is removed / + * marked invalid by the USB controller. + */ +void usb_fill_qh(uhci_qh_t* qh,unsigned long head,unsigned long element) +{ + //USB_UHCI_PRINTF("%s\n",__FUNCTION__); + + qh->head=swap_32(head); + qh->element=swap_32(element); + qh->dev_ptr=0L; +} + +/* get the status of a td->status + */ +unsigned long usb_uhci_td_stat(unsigned long status) +{ + unsigned long result=0; + result |= (status & TD_CTRL_NAK) ? USB_ST_NAK_REC : 0; + result |= (status & TD_CTRL_STALLED) ? USB_ST_STALLED : 0; + result |= (status & TD_CTRL_DBUFERR) ? USB_ST_BUF_ERR : 0; + result |= (status & TD_CTRL_BABBLE) ? USB_ST_BABBLE_DET : 0; + result |= (status & TD_CTRL_CRCTIMEO) ? USB_ST_CRC_ERR : 0; + result |= (status & TD_CTRL_BITSTUFF) ? USB_ST_BIT_ERR : 0; + result |= (status & TD_CTRL_ACTIVE) ? USB_ST_NOT_PROC : 0; + return result; +} + +/* get the status and the transfered len of a td chain. + * called from the completion handler + */ +int usb_get_td_status(uhci_td_t *td,struct usb_device *dev) +{ + unsigned long temp,info; + unsigned long stat; + uhci_td_t *mytd=td; + USB_UHCI_PRINTF("%s\n",__FUNCTION__); + + if(dev->devnum==rh.devnum) + return 0; + dev->act_len=0; + stat=0; + do { + temp=swap_32((unsigned long)mytd->status); + stat=usb_uhci_td_stat(temp); + info=swap_32((unsigned long)mytd->info); + if(((info & 0xff)!= USB_PID_SETUP) && + (((info >> 21) & 0x7ff)!= 0x7ff) && + (temp & 0x7FF)!=0x7ff) + { /* if not setup and not null data pack */ + dev->act_len+=(temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */ + } + if(stat) { /* status no ok */ + dev->status=stat; + return -1; + } + temp=swap_32((unsigned long)mytd->link); + mytd=(uhci_td_t *)(temp & 0xfffffff0); + }while((temp & 0x1)==0); /* process all TDs */ + dev->status=stat; + return 0; /* Ok */ +} + + +/*------------------------------------------------------------------- + * LOW LEVEL STUFF + * assembles QHs und TDs for control, bulk and iso + *-------------------------------------------------------------------*/ + +/* Submits a control message. That is a Setup, Data and Status transfer. + * Routine does not wait for completion. + */ +int submit_uhci_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len,struct devrequest *setup) +{ + unsigned long destination, status; + int maxsze = 0x40; + unsigned long dataptr; + int len; + int pktsze; + int i=0; + + USB_UHCI_PRINTF("uhci dev:%x,pipe:%x\n",dev,pipe); + + if (!maxsze) { + USB_UHCI_PRINTF("uhci_submit_control_urb: pipesize for pipe %lx is zero\n", pipe); + return -1; + } + + USB_UHCI_PRINTF("uhci_submit_control start len %x, maxsize %x\n",transfer_len,maxsze); + /* The "pipe" thing contains the destination in bits 8--18 */ + destination = (pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; /* Setup stage */ + /* 3 errors */ + status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27); + + /* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD); */ + /* Build the TD for the control request, try forever, 8 bytes of data */ + usb_fill_td(&tmp_td[i],UHCI_PTR_TERM ,status, destination | (7 << 21),(unsigned long)setup,(unsigned long)dev); +#if 0 + { + char *sp=(char *)setup; + printf("SETUP to pipe %lx: %x %x %x %x %x %x %x %x\n", pipe, + sp[0],sp[1],sp[2],sp[3],sp[4],sp[5],sp[6],sp[7]); + } +#endif + dataptr = (unsigned long)buffer; + len=transfer_len; + + /* If direction is "send", change the frame from SETUP (0x2D) + to OUT (0xE1). Else change it from SETUP to IN (0x69). */ + destination = (pipe & PIPE_DEVEP_MASK) | ((pipe & USB_DIR_IN)==0 ? USB_PID_OUT : USB_PID_IN); + while (len > 0) { + /* data stage */ + pktsze = len; + i++; + if (pktsze > maxsze) + pktsze = maxsze; + destination ^= 1 << TD_TOKEN_TOGGLE; /* toggle DATA0/1 */ + usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, destination | ((pktsze - 1) << 21),dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */ + tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); + + dataptr += pktsze; + len -= pktsze; + } + + /* Build the final TD for control status */ + /* It's only IN if the pipe is out AND we aren't expecting data */ + + destination &= ~UHCI_PID; + if (((pipe & USB_DIR_IN)==0) || (transfer_len == 0)) + destination |= USB_PID_IN; + else + destination |= USB_PID_OUT; + destination |= 1 << TD_TOKEN_TOGGLE; /* End in Data1 */ + i++; + status &= ~TD_CTRL_SPD; + usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status , destination | (UHCI_NULL_DATA_SIZE << 21),0,(unsigned long)dev); + tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); /* queue status td */ + /*usb_show_td(i + 1); */ + USB_UHCI_PRINTF("uhci_submit_control end (%d tmp_tds used)\n",i); + /* first mark the control QH element terminated */ + qh_cntrl.element=0xffffffffL; + /* set qh active */ + qh_cntrl.dev_ptr=(unsigned long)dev; + /* fill in tmp_td_chain */ + qh_cntrl.element=swap_32((unsigned long)&tmp_td[0]); + //check active status + usb_check_td(&tmp_td[i-1]); + + return 0; +} +static int usb_check_td(uhci_td_t *td) +{ + int start_time, end_time; + wmt_read_ostc(&start_time); + while (((swap_32(td->status) >> 23) & 0x1) == 0x1) { + if (((swap_32(td->status) >> 23) & 0x1) == 0) { + break; + } + wmt_read_ostc(&end_time); + if ((end_time - start_time) > 2000000) + break; + } + return 0; +} +static int usb_check_bulk_td(uhci_td_t *td) +{ + int start_time, end_time; + wmt_read_ostc(&start_time); + while (((swap_32(td->status) >> 23) & 0x1) == 0x1) { + if (((swap_32(td->status) >> 23) & 0x1) == 0) { + break; + } + wmt_read_ostc(&end_time); + if ((end_time - start_time) > 2000000) + break; + } + return 0; +} +/*------------------------------------------------------------------- + * Prepare TDs for bulk transfers. + */ +int submit_uhci_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len) +{ + unsigned long destination, status,info; + unsigned long dataptr; + int maxsze = 0x40; + int len; + int i = 0; + USB_UHCI_PRINTF("%s\n",__FUNCTION__); + if(transfer_len < 0) { + printf("Negative transfer length in submit_bulk\n"); + return -1; + } + USB_UHCI_PRINTF(" maxsze:%x\n",maxsze); + + /* The "pipe" thing contains the destination in bits 8--18. */ + destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe); + /* 3 errors */ + status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27); + /* ((urb->transfer_flags & USB_DISABLE_SPD) ? 0 : TD_CTRL_SPD) | (3 << 27); */ + /* Build the TDs for the bulk request */ + len = transfer_len; + dataptr = (unsigned long)buffer; + do { + int pktsze = len; + if (pktsze > maxsze) + pktsze = maxsze; + /* pktsze bytes of data */ + info = destination | (((pktsze - 1) & UHCI_NULL_DATA_SIZE) << 21) | + (usb_gettoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)) << TD_TOKEN_TOGGLE); + + usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, info,dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */ + + if (i > 0) + tmp_td[i-1].link = swap_32((unsigned long) & tmp_td[i]); + i++; + dataptr += pktsze; + len -= pktsze; + usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)); + } while (len > 0); + + /* first mark the bulk QH element terminated */ + qh_bulk.element = 0xffffffffL; + /* set qh active */ + qh_bulk.dev_ptr = (unsigned long)dev; + /* fill in tmp_td_chain */ + qh_bulk.element = swap_32((unsigned long) & tmp_td[0]); + //Check bulk td active status + usb_check_bulk_td(&tmp_td[i-1]); + + return 0; +} + + +/* search a free interrupt td + */ +uhci_td_t *uhci_alloc_int_td(void) +{ + int i; + for (i = 0;i < USB_MAX_TEMP_INT_TD;i++) { + if (tmp_int_td[i].dev_ptr == 0) /* no device assigned -> free TD */ + return &tmp_int_td[i]; + } + return NULL; +} + +#if 0 +void uhci_show_temp_int_td(void) +{ + int i; + for (i = 0;i < USB_MAX_TEMP_INT_TD;i++) { + if ((tmp_int_td[i].dev_ptr&0x01)!=0x1L) /* no device assigned -> free TD */ + printf("temp_td %d is assigned to dev %lx\n",i,tmp_int_td[i].dev_ptr); + } + printf("all others temp_tds are free\n"); +} +#endif +/*------------------------------------------------------------------- + * submits USB interrupt (ie. polling ;-) + */ +int submit_uhci_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len, int interval) +{ + int nint, n; + unsigned long status, destination; + unsigned long info,tmp; + uhci_td_t *mytd; + if (interval < 0 || interval >= 256) + return -1; + + if (interval == 0) + nint = 0; + else { + for (nint = 0, n = 1; nint <= 8; nint++, n += n) /* round interval down to 2^n */ + { + if(interval < n) { + interval = n / 2; + break; + } + } + nint--; + } + + USB_UHCI_PRINTF("Rounded interval to %i, chain %i\n", interval, nint); + mytd = uhci_alloc_int_td(); + if(mytd == NULL) { + printf("No free INT TDs found\n"); + return -1; + } + status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | TD_CTRL_IOC | (3 << 27); +/* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD) | (3 << 27); +*/ + + destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe) | (((transfer_len - 1) & 0x7ff) << 21); + + info = destination | (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)) << TD_TOKEN_TOGGLE); + tmp = swap_32(td_int[nint].link); + usb_fill_td(mytd, tmp, status, info, (unsigned long)buffer, (unsigned long)dev); + /* Link it */ + tmp = swap_32((unsigned long)mytd); + td_int[nint].link = tmp; + + usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)); + + return 0; +} + +/********************************************************************** + * Low Level functions + */ + + +void reset_hc(void) +{ + USB_UHCI_PRINTF("%s\n", __FUNCTION__); + out16r( usb_base_addr + USBCMD, USBCMD_GRESET); + /* Turn off all interrupts */ + out16r(usb_base_addr + USBINTR, 0); + wait_ms(50); + out16r( usb_base_addr + USBCMD, 0); + wait_ms(10); +} + +int start_hc(void) +{ + USB_UHCI_PRINTF("%s\n",__FUNCTION__); + int timeout = 1000; + int tmp; + + out16r( usb_base_addr + USBCMD, USBCMD_HCRESET); + wait_ms(10); + + tmp = in16r(usb_base_addr + USBCMD); + while (tmp & USBCMD_HCRESET) { + if (!(--timeout)) { + printf("USBCMD_HCRESET timed out!\n"); + break; + } + } + + + if (usb_sel & USB_PORT_A) { + /*port reset*/ + out16r(usb_base_addr + USBPORTSC1, USBPORTSC_PR ); + wait_ms(100); + tmp = in16r(usb_base_addr + USBPORTSC1); + tmp &= ~USBPORTSC_PR; + out16r(usb_base_addr + USBPORTSC1, tmp); + /*enable uhci port 1 */ + out16r(usb_base_addr + USBPORTSC1, USBPORTSC_PE |USBPORTSC_CSC | USBPORTSC_PEC); + wait_ms(50); + out16r(usb_base_addr + USBPORTSC1, USBPORTSC_PE | USBPORTSC_PEC |USBPORTSC_CSC); + /*clear port B connect status change*/ + out16r(usb_base_addr + USBPORTSC2, USBPORTSC_PEC |USBPORTSC_CSC); + tmp = in16r(usb_base_addr + USBPORTSC1); + /*low speed device ,mouse not support*/ + if (tmp & USBPORTSC_LSDA) + return -1; + } else if (usb_sel & USB_PORT_B) { + /*port reset*/ + out16r(usb_base_addr + USBPORTSC2, USBPORTSC_PR ); + wait_ms(100); + tmp = in16r(usb_base_addr + USBPORTSC2); + tmp &= ~USBPORTSC_PR; + out16r(usb_base_addr + USBPORTSC2, tmp); + /*enable uhci port 2 */ + out16r(usb_base_addr + USBPORTSC2, USBPORTSC_PE |USBPORTSC_CSC | USBPORTSC_PEC); + wait_ms(50); + out16r(usb_base_addr + USBPORTSC2, USBPORTSC_PE | USBPORTSC_PEC| USBPORTSC_CSC); + out16r(usb_base_addr + USBPORTSC1, USBPORTSC_PEC| USBPORTSC_CSC); + tmp = in16r(usb_base_addr + USBPORTSC2); + if (tmp & USBPORTSC_LSDA) + return -1; + + } + /* Start at frame 0 */ + out16r(usb_base_addr + USBFRNUM,0); + /* set Framebuffer base address */ + out32r(usb_base_addr + USBFLBASEADD, (unsigned long)&framelist); + /* Run and mark it configured with a 64-byte max packet */ + out16r(usb_base_addr + USBCMD, USBCMD_RS | USBCMD_CF | USBCMD_MAXP); + return 0; +} +void reset_hc2(void) +{ + USB_UHCI_PRINTF("%s\n", __FUNCTION__); + out16r( usb_base_addr + USBCMD, USBCMD_GRESET); + /* Turn off all interrupts */ + out16r(usb_base_addr + USBINTR, 0); + wait_ms(50); + out16r( usb_base_addr + USBCMD, 0); + wait_ms(10); +} + +int start_hc2(void) +{ + USB_UHCI_PRINTF("%s\n",__FUNCTION__); + int timeout = 1000; + int tmp; + tmp = in16r(usb_base_addr + USBCMD); + while (tmp & USBCMD_HCRESET) { + if (!(--timeout)) { + printf("USBCMD_HCRESET timed out!\n"); + break; + } + } + /* Start at frame 0 */ + out16r(usb_base_addr + USBFRNUM,0); + /* set Framebuffer base address */ + out32r(usb_base_addr + USBFLBASEADD,(unsigned long)&framelist); + if (usb_sel & USB_PORT_C) { + /*port reset*/ + out16r(usb_base_addr + USBPORTSC1, USBPORTSC_PR ); + wait_ms(100); + tmp = in16r(usb_base_addr + USBPORTSC1); + tmp &= ~USBPORTSC_PR; + out16r(usb_base_addr + USBPORTSC1, tmp); + /*enable uhci port 1 */ + out16r(usb_base_addr + USBPORTSC1, USBPORTSC_PE |USBPORTSC_CSC | USBPORTSC_PEC); + wait_ms(50); + out16r(usb_base_addr + USBPORTSC1, USBPORTSC_PE | USBPORTSC_PEC| USBPORTSC_CSC); + out16r(usb_base_addr + USBPORTSC2, USBPORTSC_PEC |USBPORTSC_CSC); + tmp = in16r(usb_base_addr + USBPORTSC1); + if (tmp & USBPORTSC_LSDA) + return -1; + } else if (usb_sel & USB_PORT_D) { + /*port reset*/ + out16r(usb_base_addr + USBPORTSC2, USBPORTSC_PR ); + wait_ms(100); + tmp = in16r(usb_base_addr + USBPORTSC2); + tmp &= ~USBPORTSC_PR; + out16r(usb_base_addr + USBPORTSC2, tmp); + /*enable uhci port 2 */ + out16r(usb_base_addr + USBPORTSC2, USBPORTSC_PE |USBPORTSC_CSC | USBPORTSC_PEC); + wait_ms(50); + out16r(usb_base_addr + USBPORTSC2, USBPORTSC_PE | USBPORTSC_PEC |USBPORTSC_CSC); + out16r(usb_base_addr + USBPORTSC1, USBPORTSC_PEC |USBPORTSC_CSC); + tmp = in16r(usb_base_addr + USBPORTSC2); + if (tmp & USBPORTSC_LSDA) + return -1; + } + + /* Run and mark it configured with a 64-byte max packet */ + out16r(usb_base_addr + USBCMD, USBCMD_RS | USBCMD_CF | USBCMD_MAXP); + return 0; +} + +/* Initialize the skeleton + */ +void usb_init_skel(void) +{ + unsigned long temp; + int n; + USB_UHCI_PRINTF("%s\n",__FUNCTION__); + + for(n = 0;n < USB_MAX_TEMP_INT_TD;n++) + tmp_int_td[n].dev_ptr = 0; /* no devices connected */ + usb_fill_td(&td_last,UHCI_PTR_TERM, 0, 0, 0, 0); + /* End Queue Header */ + usb_fill_qh(&qh_end, UHCI_PTR_TERM, (unsigned long)&td_last); + /* Bulk Queue Header */ + temp = (unsigned long)&qh_end; + usb_fill_qh(&qh_bulk,temp | UHCI_PTR_QH, UHCI_PTR_TERM); + /* Control Queue Header */ + temp = (unsigned long)&qh_bulk; + usb_fill_qh(&qh_cntrl, temp | UHCI_PTR_QH, UHCI_PTR_TERM); + /* 1ms Interrupt td */ + temp = (unsigned long)&qh_cntrl; + usb_fill_td(&td_int[0],temp | UHCI_PTR_QH, 0, 0, 0, 0); + temp = (unsigned long)&td_int[0]; + for(n = 1; n < 8; n++) + usb_fill_td(&td_int[n], temp, 0, 0, 0, 0); + for (n = 0; n < 1024; n++) { + /* link all framelist pointers to one of the interrupts */ + int m, o; + if ((n & 127) == 127) + framelist[n] = swap_32((unsigned long)&td_int[0]); + else + for (o = 1, m = 2; m <= 128; o++, m += m) + if ((n & (m - 1)) == ((m - 1) / 2)) + framelist[n]= swap_32((unsigned long)&td_int[o]); + } +} + +/* check the common skeleton for completed transfers, and update the status + * of the "connected" device. Called from the IRQ routine. + */ +void usb_check_skel(void) +{ + struct usb_device *dev; + /* start with the control qh */ + if(qh_cntrl.dev_ptr!= 0) /* it's a device assigned check if this caused IRQ */ + { + dev = (struct usb_device *)qh_cntrl.dev_ptr; + usb_get_td_status(&tmp_td[0],dev); /* update status */ + if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */ + qh_cntrl.dev_ptr = 0; + } + } + /* now process the bulk */ + if(qh_bulk.dev_ptr!= 0) /* it's a device assigned check if this caused IRQ */ + { + dev = (struct usb_device *)qh_bulk.dev_ptr; + usb_get_td_status(&tmp_td[0],dev); /* update status */ + if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */ + qh_bulk.dev_ptr = 0; + } + } +} + +/* check the interrupt chain, ubdate the status of the appropriate device, + * call the appropriate irqhandler and reactivate the TD if the irqhandler + * returns with 1 + */ +void usb_check_int_chain(void) +{ + int i,res; + unsigned long link,status; + struct usb_device *dev; + uhci_td_t *td,*prevtd; + + for(i=0;i<8;i++) { + prevtd=&td_int[i]; /* the first previous td is the skeleton td */ + link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */ + td=(uhci_td_t *)link; /* assign it */ + /* all interrupt TDs are finally linked to the td_int[0]. + * so we process all until we find the td_int[0]. + * if int0 chain points to a QH, we're also done + */ + while(((i>0) && (link != (unsigned long)&td_int[0])) || + ((i==0) && !(swap_32(td->link) & UHCI_PTR_QH))) + { + /* check if a device is assigned with this td */ + status=swap_32(td->status); + if((td->dev_ptr!=0L) && !(status & TD_CTRL_ACTIVE)) { + /* td is not active and a device is assigned -> call irqhandler */ + dev=(struct usb_device *)td->dev_ptr; + dev->irq_act_len=((status & 0x7FF)==0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */ + dev->irq_status=usb_uhci_td_stat(status); /* get status */ + res=dev->irq_handle(dev); /* call irqhandler */ + if(res==1) { + /* reactivate */ + status|=TD_CTRL_ACTIVE; + td->status=swap_32(status); + prevtd=td; /* previous td = this td */ + } + else { + prevtd->link=td->link; /* link previous td directly to the nex td -> unlinked */ + /* remove device pointer */ + td->dev_ptr=0L; + } + } /* if we call the irq handler */ + link=swap_32(td->link) & 0xfffffff0; /* next in chain */ + td=(uhci_td_t *)link; /* assign it */ + } /* process all td in this int chain */ + } /* next interrupt chain */ +} + + +/* usb interrupt service routine. + */ +void handle_usb_interrupt(void) +{ + unsigned short status; + USB_UHCI_PRINTF("%s\n",__FUNCTION__); + + /* + * Read the interrupt status, and write it back to clear the + * interrupt cause + */ + + status = in16r(usb_base_addr + USBSTS); + + if (!status) /* shared interrupt, not mine */ + return; + if (status != 1) { + /* remove host controller halted state */ + if ((status&0x20) && ((in16r(usb_base_addr+USBCMD) && USBCMD_RS)==0)) { + out16r(usb_base_addr + USBCMD, USBCMD_RS | in16r(usb_base_addr + USBCMD)); + } + } + usb_check_int_chain(); /* call interrupt handlers for int tds */ + usb_check_skel(); /* call completion handler for common transfer routines */ + out16r(usb_base_addr+USBSTS,status); +} + + + +/* init uhci + */ +int uhci_lowlevel_init(void) +{ + int status=0; + USB_UHCI_PRINTF("%s\n",__FUNCTION__); + + rh.devnum = 0; + usb_init_skel(); + + if (usb_sel & USB_UHCI_1) { + usb_base_addr = BA_UHCI_REG; + USB_UHCI_PRINTF("usb_base_addr = 0x%8.8x\n", usb_base_addr); + reset_hc(); + status = start_hc(); + if (status < 0) + return -1; + }else if (usb_sel & USB_UHCI_2 ) { + usb_base_addr = BA_UHCI2_REG; + USB_UHCI_PRINTF("usb_base_addr = 0x%8.8x\n", usb_base_addr); + reset_hc2(); + status = start_hc2(); + if (status < 0) + return -1; + }else { + usb_base_addr = BA_UHCI_REG; + USB_UHCI_PRINTF("usb_base_addr = 0x%8.8x\n", usb_base_addr); + reset_hc(); + status = start_hc(); + if (status < 0) + return -1; + } + + usb_flag = usb_uhci_flag; + return 0; +} + +/* stop uhci + */ +int uhci_lowlevel_stop(void) +{ + + if (usb_sel & USB_UHCI_1) { + reset_hc(); + }else if (usb_sel & USB_UHCI_2) { + reset_hc2(); + } + return 0; +} + +/******************************************************************************************* + * Virtual Root Hub + * Since the uhci does not have a real HUB, we simulate one ;-) + */ +/* #undef USB_RH_DEBUG */ +#define USB_RH_DEBUG 1 +#ifdef USB_RH_DEBUG +#define USB_RH_PRINTF(fmt,args...) printf (fmt ,##args) +static void usb_display_wValue(unsigned short wValue,unsigned short wIndex); +static void usb_display_Req(unsigned short req); +#else +#define USB_RH_PRINTF(fmt,args...) +static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) {} +static void usb_display_Req(unsigned short req) {} +#endif + +static unsigned char root_hub_dev_des[] = +{ + 0x12, /* __u8 bLength; */ + 0x01, /* __u8 bDescriptorType; Device */ + 0x00, /* __u16 bcdUSB; v1.0 */ + 0x01, + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; */ + 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ + 0x00, /* __u16 idVendor; */ + 0x00, + 0x00, /* __u16 idProduct; */ + 0x00, + 0x00, /* __u16 bcdDevice; */ + 0x00, + 0x01, /* __u8 iManufacturer; */ + 0x00, /* __u8 iProduct; */ + 0x00, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + + +/* Configuration descriptor */ +static unsigned char root_hub_config_des[] = +{ + 0x09, /* __u8 bLength; */ + 0x02, /* __u8 bDescriptorType; Configuration */ + 0x19, /* __u16 wTotalLength; */ + 0x00, + 0x01, /* __u8 bNumInterfaces; */ + 0x01, /* __u8 bConfigurationValue; */ + 0x00, /* __u8 iConfiguration; */ + 0x40, /* __u8 bmAttributes; + Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */ + 0x00, /* __u8 MaxPower; */ + + /* interface */ + 0x09, /* __u8 if_bLength; */ + 0x04, /* __u8 if_bDescriptorType; Interface */ + 0x00, /* __u8 if_bInterfaceNumber; */ + 0x00, /* __u8 if_bAlternateSetting; */ + 0x01, /* __u8 if_bNumEndpoints; */ + 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ + 0x00, /* __u8 if_bInterfaceSubClass; */ + 0x00, /* __u8 if_bInterfaceProtocol; */ + 0x00, /* __u8 if_iInterface; */ + + /* endpoint */ + 0x07, /* __u8 ep_bLength; */ + 0x05, /* __u8 ep_bDescriptorType; Endpoint */ + 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x08, /* __u16 ep_wMaxPacketSize; 8 Bytes */ + 0x00, + 0xff /* __u8 ep_bInterval; 255 ms */ +}; + + +static unsigned char root_hub_hub_des[] = +{ + 0x09, /* __u8 bLength; */ + 0x29, /* __u8 bDescriptorType; Hub-descriptor */ + 0x02, /* __u8 bNbrPorts; */ + 0x00, /* __u16 wHubCharacteristics; */ + 0x00, + 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ + 0x00, /* __u8 bHubContrCurrent; 0 mA */ + 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ + 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ +}; + +static unsigned char root_hub_str_index0[] = +{ + 0x04, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 0x09, /* __u8 lang ID */ + 0x04, /* __u8 lang ID */ +}; + +static unsigned char root_hub_str_index1[] = +{ + 28, /* __u8 bLength; */ + 0x03, /* __u8 bDescriptorType; String-descriptor */ + 'U', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'H', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'C', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'I', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'R', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'o', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 't', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + ' ', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'H', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'u', /* __u8 Unicode */ + 0, /* __u8 Unicode */ + 'b', /* __u8 Unicode */ + 0, /* __u8 Unicode */ +}; + + +/* + * Root Hub Control Pipe (interrupt Pipes are not supported) + */ + + +int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len,struct devrequest *cmd) +{ + void *data = buffer; + int leni = transfer_len; + int len = 0; + int status = 0; + int stat = 0; + int i; + + unsigned short cstatus; + + unsigned short bmRType_bReq; + unsigned short wValue; + unsigned short wIndex; + unsigned short wLength; + + if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) { + printf("Root-Hub submit IRQ: NOT implemented\n"); +#if 0 + uhci->rh.urb = urb; + uhci->rh.send = 1; + uhci->rh.interval = urb->interval; + rh_init_int_timer (urb); +#endif + return 0; + } + bmRType_bReq = cmd->requesttype | cmd->request << 8; + wValue = swap_16(cmd->value); + wIndex = swap_16(cmd->index); + wLength = swap_16(cmd->length); + usb_display_Req(bmRType_bReq); + for (i = 0; i < 8; i++) + rh.c_p_r[i] = 0; + USB_RH_PRINTF("Root-Hub: adr: %2x cmd(%1x): %02x %02x %04x %04x %04x\n", + dev->devnum, 8, cmd->requesttype,cmd->request, wValue, wIndex, wLength); + + switch (bmRType_bReq) { + /* Request Destination: + without flags: Device, + RH_INTERFACE: interface, + RH_ENDPOINT: endpoint, + RH_CLASS means HUB here, + RH_OTHER | RH_CLASS almost ever means HUB_PORT here + */ + + case RH_GET_STATUS: + *(unsigned short *) data = swap_16(1); + len=2; + break; + case RH_GET_STATUS | RH_INTERFACE: + *(unsigned short *) data = swap_16(0); + len=2; + break; + case RH_GET_STATUS | RH_ENDPOINT: + *(unsigned short *) data = swap_16(0); + len=2; + break; + case RH_GET_STATUS | RH_CLASS: + *(unsigned long *) data = swap_32(0); + len=4; + break; /* hub power ** */ + case RH_GET_STATUS | RH_OTHER | RH_CLASS: + + status = in16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1)); + cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) | + ((status & USBPORTSC_PEC) >> (3 - 1)) | + (rh.c_p_r[wIndex - 1] << (0 + 4)); + status = (status & USBPORTSC_CCS) | + ((status & USBPORTSC_PE) >> (2 - 1)) | + ((status & USBPORTSC_SUSP) >> (12 - 2)) | + ((status & USBPORTSC_PR) >> (9 - 4)) | + (1 << 8) | /* power on ** */ + ((status & USBPORTSC_LSDA) << (-8 + 9)); + + *(unsigned short *) data = swap_16(status); + *(unsigned short *) (data + 2) = swap_16(cstatus); + len=4; + break; + case RH_CLEAR_FEATURE | RH_ENDPOINT: + switch (wValue) { + case (RH_ENDPOINT_STALL): + len=0; + break; + } + break; + + case RH_CLEAR_FEATURE | RH_CLASS: + switch (wValue) { + case (RH_C_HUB_OVER_CURRENT): + len=0; /* hub power over current ** */ + break; + } + break; + + case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: + usb_display_wValue(wValue,wIndex); + switch (wValue) { + case (RH_PORT_ENABLE): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) & ~USBPORTSC_PE; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + case (RH_PORT_SUSPEND): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) & ~USBPORTSC_SUSP; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + case (RH_PORT_POWER): + len=0; /* port power ** */ + break; + case (RH_C_PORT_CONNECTION): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) | USBPORTSC_CSC; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + case (RH_C_PORT_ENABLE): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) | USBPORTSC_PEC; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + case (RH_C_PORT_SUSPEND): +/*** WR_RH_PORTSTAT(RH_PS_PSSC); */ + len=0; + break; + case (RH_C_PORT_OVER_CURRENT): + len=0; + break; + case (RH_C_PORT_RESET): + rh.c_p_r[wIndex - 1] = 0; + len=0; + break; + } + break; + case RH_SET_FEATURE | RH_OTHER | RH_CLASS: + usb_display_wValue(wValue,wIndex); + switch (wValue) { + case (RH_PORT_SUSPEND): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) | USBPORTSC_SUSP; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + case (RH_PORT_RESET): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) | USBPORTSC_PR; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + wait_ms(10); + status = (status & 0xfff5) & ~USBPORTSC_PR; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + udelay(10); + status = (status & 0xfff5) | USBPORTSC_PE; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + wait_ms(10); + status = (status & 0xfff5) | 0xa; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + case (RH_PORT_POWER): + len=0; /* port power ** */ + break; + case (RH_PORT_ENABLE): + status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); + status = (status & 0xfff5) | USBPORTSC_PE; + out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); + len=0; + break; + } + break; + + case RH_SET_ADDRESS: + rh.devnum = wValue; + len=0; + break; + case RH_GET_DESCRIPTOR: + switch ((wValue & 0xff00) >> 8) { + case (0x01): /* device descriptor */ + i=sizeof(root_hub_config_des); + status=i > wLength ? wLength : i; + len = leni > status ? status : leni; + memcpy (data, root_hub_dev_des, len); + break; + case (0x02): /* configuration descriptor */ + i=sizeof(root_hub_config_des); + status=i > wLength ? wLength : i; + len = leni > status ? status : leni; + memcpy (data, root_hub_config_des, len); + break; + case (0x03): /*string descriptors */ + if(wValue==0x0300) { + i=sizeof(root_hub_str_index0); + status = i > wLength ? wLength : i; + len = leni > status ? status : leni; + memcpy (data, root_hub_str_index0, len); + break; + } + if(wValue==0x0301) { + i=sizeof(root_hub_str_index1); + status = i > wLength ? wLength : i; + len = leni > status ? status : leni; + memcpy (data, root_hub_str_index1, len); + break; + } + stat = USB_ST_STALLED; + } + break; + + case RH_GET_DESCRIPTOR | RH_CLASS: + root_hub_hub_des[2] = 2; + i=sizeof(root_hub_hub_des); + status= i > wLength ? wLength : i; + len = leni > status ? status : leni; + memcpy (data, root_hub_hub_des, len); + break; + case RH_GET_CONFIGURATION: + *(unsigned char *) data = 0x01; + len = 1; + break; + case RH_SET_CONFIGURATION: + len=0; + break; + default: + stat = USB_ST_STALLED; + } + USB_RH_PRINTF("Root-Hub stat %lx port1: %x port2: %x\n\n",stat, + in16r(usb_base_addr + USBPORTSC1), in16r(usb_base_addr + USBPORTSC2)); + dev->act_len=len; + dev->status=stat; + return stat; + +} + +/******************************************************************************** + * Some Debug Routines + */ + +#ifdef USB_RH_DEBUG + +static void usb_display_Req(unsigned short req) +{ + USB_RH_PRINTF("- Root-Hub Request: "); + switch (req) { + case RH_GET_STATUS: + USB_RH_PRINTF("Get Status "); + break; + case RH_GET_STATUS | RH_INTERFACE: + USB_RH_PRINTF("Get Status Interface "); + break; + case RH_GET_STATUS | RH_ENDPOINT: + USB_RH_PRINTF("Get Status Endpoint "); + break; + case RH_GET_STATUS | RH_CLASS: + USB_RH_PRINTF("Get Status Class"); + break; /* hub power ** */ + case RH_GET_STATUS | RH_OTHER | RH_CLASS: + USB_RH_PRINTF("Get Status Class Others"); + break; + case RH_CLEAR_FEATURE | RH_ENDPOINT: + USB_RH_PRINTF("Clear Feature Endpoint "); + break; + case RH_CLEAR_FEATURE | RH_CLASS: + USB_RH_PRINTF("Clear Feature Class "); + break; + case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: + USB_RH_PRINTF("Clear Feature Other Class "); + break; + case RH_SET_FEATURE | RH_OTHER | RH_CLASS: + USB_RH_PRINTF("Set Feature Other Class "); + break; + case RH_SET_ADDRESS: + USB_RH_PRINTF("Set Address "); + break; + case RH_GET_DESCRIPTOR: + USB_RH_PRINTF("Get Descriptor "); + break; + case RH_GET_DESCRIPTOR | RH_CLASS: + USB_RH_PRINTF("Get Descriptor Class "); + break; + case RH_GET_CONFIGURATION: + USB_RH_PRINTF("Get Configuration "); + break; + case RH_SET_CONFIGURATION: + USB_RH_PRINTF("Get Configuration "); + break; + default: + USB_RH_PRINTF("****UNKNOWN**** 0x%04X ",req); + } + USB_RH_PRINTF("\n"); + +} + +static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) +{ + switch (wValue) { + case (RH_PORT_ENABLE): + USB_RH_PRINTF("Root-Hub: Enable Port %d\n",wIndex); + break; + case (RH_PORT_SUSPEND): + USB_RH_PRINTF("Root-Hub: Suspend Port %d\n",wIndex); + break; + case (RH_PORT_POWER): + USB_RH_PRINTF("Root-Hub: Port Power %d\n",wIndex); + break; + case (RH_C_PORT_CONNECTION): + USB_RH_PRINTF("Root-Hub: C Port Connection Port %d\n",wIndex); + break; + case (RH_C_PORT_ENABLE): + USB_RH_PRINTF("Root-Hub: C Port Enable Port %d\n",wIndex); + break; + case (RH_C_PORT_SUSPEND): + USB_RH_PRINTF("Root-Hub: C Port Suspend Port %d\n",wIndex); + break; + case (RH_C_PORT_OVER_CURRENT): + USB_RH_PRINTF("Root-Hub: C Port Over Current Port %d\n",wIndex); + break; + case (RH_C_PORT_RESET): + USB_RH_PRINTF("Root-Hub: C Port reset Port %d\n",wIndex); + break; + default: + USB_RH_PRINTF("Root-Hub: unknown %x %x\n",wValue,wIndex); + break; + } +} + +#endif + + +#ifdef USB_UHCI_DEBUG + +static int usb_display_td(uhci_td_t *td) +{ + unsigned long tmp; + int valid; + + printf("TD at %p:\n",td); + + tmp=swap_32(td->link); + printf("Link points to 0x%08lX, %s first, %s, %s\n",tmp&0xfffffff0, + ((tmp & 0x4)==0x4) ? "Depth" : "Breath", + ((tmp & 0x2)==0x2) ? "QH" : "TD", + ((tmp & 0x1)==0x1) ? "invalid" : "valid"); + valid=((tmp & 0x1)==0x0); + tmp=swap_32(td->status); + printf(" %s %ld Errors %s %s %s \n %s %s %s %s %s %s\n Len 0x%lX\n", + (((tmp>>29)&0x1)==0x1) ? "SPD Enable" : "SPD Disable", + ((tmp>>28)&0x3), + (((tmp>>26)&0x1)==0x1) ? "Low Speed" : "Full Speed", + (((tmp>>25)&0x1)==0x1) ? "ISO " : "", + (((tmp>>24)&0x1)==0x1) ? "IOC " : "", + (((tmp>>23)&0x1)==0x1) ? "Active " : "Inactive ", + (((tmp>>22)&0x1)==0x1) ? "Stalled" : "", + (((tmp>>21)&0x1)==0x1) ? "Data Buffer Error" : "", + (((tmp>>20)&0x1)==0x1) ? "Babble" : "", + (((tmp>>19)&0x1)==0x1) ? "NAK" : "", + (((tmp>>18)&0x1)==0x1) ? "Bitstuff Error" : "", + (tmp&0x7ff)); + tmp=swap_32(td->info); + printf(" MaxLen 0x%lX\n",((tmp>>21)&0x7FF)); + printf(" %s Endpoint 0x%lX Dev Addr 0x%lX PID 0x%lX\n",((tmp>>19)&0x1)==0x1 ? "TOGGLE" : "", + ((tmp>>15)&0xF),((tmp>>8)&0x7F),tmp&0xFF); + tmp=swap_32(td->buffer); + printf(" Buffer 0x%08lX\n",tmp); + printf(" DEV %08lX\n",td->dev_ptr); + return valid; +} + + +void usb_show_td(int max) +{ + int i; + if (max > 0) { + for (i = 0; i < max; i++) { + usb_display_td(&tmp_td[i]); + } + } else { + i = 0; + do { + printf("tmp_td[%d]\n", i); + }while(usb_display_td(&tmp_td[i++])); + } +} + + + +#endif +#endif /* CONFIG_USB_UHCI */ + +/* EOF */ |