summaryrefslogtreecommitdiff
path: root/board/mpl/common/usb_uhci.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/mpl/common/usb_uhci.c')
-rwxr-xr-xboard/mpl/common/usb_uhci.c1169
1 files changed, 1169 insertions, 0 deletions
diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c
new file mode 100755
index 0000000..84c91c4
--- /dev/null
+++ b/board/mpl/common/usb_uhci.c
@@ -0,0 +1,1169 @@
+/*
+ * Part of this code has been derived from linux:
+ * Universal Host Controller Interface driver for USB (take II).
+ *
+ * (c) 1999-2001 Georg Acher, acher@in.tum.de (executive slave) (base guitar)
+ * Deti Fliegl, deti@fliegl.de (executive slave) (lead voice)
+ * Thomas Sailer, sailer@ife.ee.ethz.ch (chief consultant) (cheer leader)
+ * Roman Weissgaerber, weissg@vienna.at (virt root hub) (studio porter)
+ * (c) 2000 Yggdrasil Computing, Inc. (port of new PCI interface support
+ * from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
+ * (C) 2000 David Brownell, david-b@pacbell.net (usb-ohci.c)
+ *
+ * HW-initalization based on material of
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999 Johannes Erdfelt
+ * (C) Copyright 1999 Randy Dunlap
+ * (C) Copyright 1999 Gregory P. Smith
+ *
+ *
+ * Adapted for U-Boot:
+ * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ */
+
+/**********************************************************************
+ * How it works:
+ * -------------
+ * The framelist / Transfer descriptor / Queue Heads are similar like
+ * in the linux usb_uhci.c.
+ *
+ * During initialization, the following skeleton is allocated in init_skel:
+ *
+ * framespecific | common chain
+ *
+ * framelist[]
+ * [ 0 ]-----> TD ---------\
+ * [ 1 ]-----> TD ----------> TD ------> QH -------> QH -------> QH ---> NULL
+ * ... TD ---------/
+ * [1023]-----> TD --------/
+ *
+ * ^^ ^^ ^^ ^^ ^^
+ * 7 TDs for 1 TD for Start of Start of End Chain
+ * INT (2-128ms) 1ms-INT CTRL Chain BULK Chain
+ *
+ *
+ * Since this is a bootloader, the isochronous transfer descriptor have been removed.
+ *
+ * Interrupt Transfers.
+ * --------------------
+ * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
+ * will be inserted after the appropriate (depending the interval setting) skeleton TD.
+ * If an interrupt has been detected the dev->irqhandler is called. The status and number
+ * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
+ * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned,
+ * the interrupt TD will be reactivated.
+ *
+ * Control Transfers
+ * -----------------
+ * Control Transfers are issued by filling the tmp_td with the appropriate data and connect
+ * them to the qh_cntrl queue header. Before other control/bulk transfers can be issued,
+ * the programm has to wait for completion. This does not allows asynchronous data transfer.
+ *
+ * Bulk Transfers
+ * --------------
+ * Bulk Transfers are issued by filling the tmp_td with the appropriate data and connect
+ * them to the qh_bulk queue header. Before other control/bulk transfers can be issued,
+ * the programm has to wait for completion. This does not allows asynchronous data transfer.
+ *
+ *
+ */
+
+#include <common.h>
+#include <pci.h>
+
+#ifdef CONFIG_USB_UHCI
+
+#include <usb.h>
+#include "usb_uhci.h"
+
+#define USB_MAX_TEMP_TD 128 /* number of temporary TDs for bulk and control transfers */
+#define USB_MAX_TEMP_INT_TD 32 /* number of temporary TDs for Interrupt transfers */
+
+
+#undef USB_UHCI_DEBUG
+
+#ifdef USB_UHCI_DEBUG
+#define USB_UHCI_PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define USB_UHCI_PRINTF(fmt,args...)
+#endif
+
+
+static int irqvec = -1; /* irq vector, if -1 uhci is stopped / reseted */
+unsigned int usb_base_addr; /* base address */
+
+static uhci_td_t td_int[8]; /* Interrupt Transfer descriptors */
+static uhci_qh_t qh_cntrl; /* control Queue Head */
+static uhci_qh_t qh_bulk; /* bulk Queue Head */
+static uhci_qh_t qh_end; /* end Queue Head */
+static uhci_td_t td_last; /* last TD (linked with end chain) */
+
+/* temporary tds */
+static uhci_td_t tmp_td[USB_MAX_TEMP_TD]; /* temporary bulk/control td's */
+static uhci_td_t tmp_int_td[USB_MAX_TEMP_INT_TD]; /* temporary interrupt td's */
+
+static unsigned long framelist[1024] __attribute__ ((aligned (0x1000))); /* frame list */
+
+static struct virt_root_hub rh; /* struct for root hub */
+
+/**********************************************************************
+ * some forward decleration
+ */
+int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len,struct devrequest *setup);
+
+/* fill a td with the approproiate data. Link, status, info and buffer
+ * are used by the USB controller itselfes, dev is used to identify the
+ * "connected" device
+ */
+void usb_fill_td(uhci_td_t* td,unsigned long link,unsigned long status,
+ unsigned long info, unsigned long buffer, unsigned long dev)
+{
+ td->link=swap_32(link);
+ td->status=swap_32(status);
+ td->info=swap_32(info);
+ td->buffer=swap_32(buffer);
+ td->dev_ptr=dev;
+}
+
+/* fill a qh with the approproiate data. Head and element are used by the USB controller
+ * itselfes. As soon as a valid dev_ptr is filled, a td chain is connected to the qh.
+ * Please note, that after completion of the td chain, the entry element is removed /
+ * marked invalid by the USB controller.
+ */
+void usb_fill_qh(uhci_qh_t* qh,unsigned long head,unsigned long element)
+{
+ qh->head=swap_32(head);
+ qh->element=swap_32(element);
+ qh->dev_ptr=0L;
+}
+
+/* get the status of a td->status
+ */
+unsigned long usb_uhci_td_stat(unsigned long status)
+{
+ unsigned long result=0;
+ result |= (status & TD_CTRL_NAK) ? USB_ST_NAK_REC : 0;
+ result |= (status & TD_CTRL_STALLED) ? USB_ST_STALLED : 0;
+ result |= (status & TD_CTRL_DBUFERR) ? USB_ST_BUF_ERR : 0;
+ result |= (status & TD_CTRL_BABBLE) ? USB_ST_BABBLE_DET : 0;
+ result |= (status & TD_CTRL_CRCTIMEO) ? USB_ST_CRC_ERR : 0;
+ result |= (status & TD_CTRL_BITSTUFF) ? USB_ST_BIT_ERR : 0;
+ result |= (status & TD_CTRL_ACTIVE) ? USB_ST_NOT_PROC : 0;
+ return result;
+}
+
+/* get the status and the transfered len of a td chain.
+ * called from the completion handler
+ */
+int usb_get_td_status(uhci_td_t *td,struct usb_device *dev)
+{
+ unsigned long temp,info;
+ unsigned long stat;
+ uhci_td_t *mytd=td;
+
+ if(dev->devnum==rh.devnum)
+ return 0;
+ dev->act_len=0;
+ stat=0;
+ do {
+ temp=swap_32((unsigned long)mytd->status);
+ stat=usb_uhci_td_stat(temp);
+ info=swap_32((unsigned long)mytd->info);
+ if(((info & 0xff)!= USB_PID_SETUP) &&
+ (((info >> 21) & 0x7ff)!= 0x7ff) &&
+ (temp & 0x7FF)!=0x7ff)
+ { /* if not setup and not null data pack */
+ dev->act_len+=(temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */
+ }
+ if(stat) { /* status no ok */
+ dev->status=stat;
+ return -1;
+ }
+ temp=swap_32((unsigned long)mytd->link);
+ mytd=(uhci_td_t *)(temp & 0xfffffff0);
+ }while((temp & 0x1)==0); /* process all TDs */
+ dev->status=stat;
+ return 0; /* Ok */
+}
+
+
+/*-------------------------------------------------------------------
+ * LOW LEVEL STUFF
+ * assembles QHs und TDs for control, bulk and iso
+ *-------------------------------------------------------------------*/
+
+/* Submits a control message. That is a Setup, Data and Status transfer.
+ * Routine does not wait for completion.
+ */
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len,struct devrequest *setup)
+{
+ unsigned long destination, status;
+ int maxsze = usb_maxpacket(dev, pipe);
+ unsigned long dataptr;
+ int len;
+ int pktsze;
+ int i=0;
+
+ if (!maxsze) {
+ USB_UHCI_PRINTF("uhci_submit_control_urb: pipesize for pipe %lx is zero\n", pipe);
+ return -1;
+ }
+ if(((pipe>>8)&0x7f)==rh.devnum) {
+ /* this is the root hub -> redirect it */
+ return uhci_submit_rh_msg(dev,pipe,buffer,transfer_len,setup);
+ }
+ USB_UHCI_PRINTF("uhci_submit_control start len %x, maxsize %x\n",transfer_len,maxsze);
+ /* The "pipe" thing contains the destination in bits 8--18 */
+ destination = (pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; /* Setup stage */
+ /* 3 errors */
+ status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
+ /* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD); */
+ /* Build the TD for the control request, try forever, 8 bytes of data */
+ usb_fill_td(&tmp_td[i],UHCI_PTR_TERM ,status, destination | (7 << 21),(unsigned long)setup,(unsigned long)dev);
+#if 0
+ {
+ char *sp=(char *)setup;
+ printf("SETUP to pipe %lx: %x %x %x %x %x %x %x %x\n", pipe,
+ sp[0],sp[1],sp[2],sp[3],sp[4],sp[5],sp[6],sp[7]);
+ }
+#endif
+ dataptr = (unsigned long)buffer;
+ len=transfer_len;
+
+ /* If direction is "send", change the frame from SETUP (0x2D)
+ to OUT (0xE1). Else change it from SETUP to IN (0x69). */
+ destination = (pipe & PIPE_DEVEP_MASK) | ((pipe & USB_DIR_IN)==0 ? USB_PID_OUT : USB_PID_IN);
+ while (len > 0) {
+ /* data stage */
+ pktsze = len;
+ i++;
+ if (pktsze > maxsze)
+ pktsze = maxsze;
+ destination ^= 1 << TD_TOKEN_TOGGLE; /* toggle DATA0/1 */
+ usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, destination | ((pktsze - 1) << 21),dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */
+ tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]);
+
+ dataptr += pktsze;
+ len -= pktsze;
+ }
+
+ /* Build the final TD for control status */
+ /* It's only IN if the pipe is out AND we aren't expecting data */
+
+ destination &= ~UHCI_PID;
+ if (((pipe & USB_DIR_IN)==0) || (transfer_len == 0))
+ destination |= USB_PID_IN;
+ else
+ destination |= USB_PID_OUT;
+ destination |= 1 << TD_TOKEN_TOGGLE; /* End in Data1 */
+ i++;
+ status &=~TD_CTRL_SPD;
+ /* no limit on errors on final packet , 0 bytes of data */
+ usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status | TD_CTRL_IOC, destination | (UHCI_NULL_DATA_SIZE << 21),0,(unsigned long)dev);
+ tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); /* queue status td */
+ /* usb_show_td(i+1);*/
+ USB_UHCI_PRINTF("uhci_submit_control end (%d tmp_tds used)\n",i);
+ /* first mark the control QH element terminated */
+ qh_cntrl.element=0xffffffffL;
+ /* set qh active */
+ qh_cntrl.dev_ptr=(unsigned long)dev;
+ /* fill in tmp_td_chain */
+ qh_cntrl.element=swap_32((unsigned long)&tmp_td[0]);
+ return 0;
+}
+
+/*-------------------------------------------------------------------
+ * Prepare TDs for bulk transfers.
+ */
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len)
+{
+ unsigned long destination, status,info;
+ unsigned long dataptr;
+ int maxsze = usb_maxpacket(dev, pipe);
+ int len;
+ int i=0;
+
+ if(transfer_len < 0) {
+ printf("Negative transfer length in submit_bulk\n");
+ return -1;
+ }
+ if (!maxsze)
+ return -1;
+ /* The "pipe" thing contains the destination in bits 8--18. */
+ destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe);
+ /* 3 errors */
+ status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
+ /* ((urb->transfer_flags & USB_DISABLE_SPD) ? 0 : TD_CTRL_SPD) | (3 << 27); */
+ /* Build the TDs for the bulk request */
+ len = transfer_len;
+ dataptr = (unsigned long)buffer;
+ do {
+ int pktsze = len;
+ if (pktsze > maxsze)
+ pktsze = maxsze;
+ /* pktsze bytes of data */
+ info = destination | (((pktsze - 1)&UHCI_NULL_DATA_SIZE) << 21) |
+ (usb_gettoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)) << TD_TOKEN_TOGGLE);
+
+ if((len-pktsze)==0)
+ status |= TD_CTRL_IOC; /* last one generates INT */
+
+ usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, info,dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */
+ if(i>0)
+ tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]);
+ i++;
+ dataptr += pktsze;
+ len -= pktsze;
+ usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe));
+ } while (len > 0);
+ /* first mark the bulk QH element terminated */
+ qh_bulk.element=0xffffffffL;
+ /* set qh active */
+ qh_bulk.dev_ptr=(unsigned long)dev;
+ /* fill in tmp_td_chain */
+ qh_bulk.element=swap_32((unsigned long)&tmp_td[0]);
+ return 0;
+}
+
+
+/* search a free interrupt td
+ */
+uhci_td_t *uhci_alloc_int_td(void)
+{
+ int i;
+ for(i=0;i<USB_MAX_TEMP_INT_TD;i++) {
+ if(tmp_int_td[i].dev_ptr==0) /* no device assigned -> free TD */
+ return &tmp_int_td[i];
+ }
+ return NULL;
+}
+
+#if 0
+void uhci_show_temp_int_td(void)
+{
+ int i;
+ for(i=0;i<USB_MAX_TEMP_INT_TD;i++) {
+ if((tmp_int_td[i].dev_ptr&0x01)!=0x1L) /* no device assigned -> free TD */
+ printf("temp_td %d is assigned to dev %lx\n",i,tmp_int_td[i].dev_ptr);
+ }
+ printf("all others temp_tds are free\n");
+}
+#endif
+/*-------------------------------------------------------------------
+ * submits USB interrupt (ie. polling ;-)
+ */
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len, int interval)
+{
+ int nint, n;
+ unsigned long status, destination;
+ unsigned long info,tmp;
+ uhci_td_t *mytd;
+ if (interval < 0 || interval >= 256)
+ return -1;
+
+ if (interval == 0)
+ nint = 0;
+ else {
+ for (nint = 0, n = 1; nint <= 8; nint++, n += n) /* round interval down to 2^n */
+ {
+ if(interval < n) {
+ interval = n / 2;
+ break;
+ }
+ }
+ nint--;
+ }
+
+ USB_UHCI_PRINTF("Rounded interval to %i, chain %i\n", interval, nint);
+ mytd=uhci_alloc_int_td();
+ if(mytd==NULL) {
+ printf("No free INT TDs found\n");
+ return -1;
+ }
+ status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | TD_CTRL_IOC | (3 << 27);
+/* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD) | (3 << 27);
+*/
+
+ destination =(pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe) | (((transfer_len - 1) & 0x7ff) << 21);
+
+ info = destination | (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)) << TD_TOKEN_TOGGLE);
+ tmp = swap_32(td_int[nint].link);
+ usb_fill_td(mytd,tmp,status, info,(unsigned long)buffer,(unsigned long)dev);
+ /* Link it */
+ tmp = swap_32((unsigned long)mytd);
+ td_int[nint].link=tmp;
+
+ usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe));
+
+ return 0;
+}
+
+/**********************************************************************
+ * Low Level functions
+ */
+
+
+void reset_hc(void)
+{
+
+ /* Global reset for 100ms */
+ out16r( usb_base_addr + USBPORTSC1,0x0204);
+ out16r( usb_base_addr + USBPORTSC2,0x0204);
+ out16r( usb_base_addr + USBCMD,USBCMD_GRESET | USBCMD_RS);
+ /* Turn off all interrupts */
+ out16r(usb_base_addr + USBINTR,0);
+ wait_ms(50);
+ out16r( usb_base_addr + USBCMD,0);
+ wait_ms(10);
+}
+
+void start_hc(void)
+{
+ int timeout = 1000;
+
+ while(in16r(usb_base_addr + USBCMD) & USBCMD_HCRESET) {
+ if (!--timeout) {
+ printf("USBCMD_HCRESET timed out!\n");
+ break;
+ }
+ }
+ /* Turn on all interrupts */
+ out16r(usb_base_addr + USBINTR,USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP);
+ /* Start at frame 0 */
+ out16r(usb_base_addr + USBFRNUM,0);
+ /* set Framebuffer base address */
+ out32r(usb_base_addr+USBFLBASEADD,(unsigned long)&framelist);
+ /* Run and mark it configured with a 64-byte max packet */
+ out16r(usb_base_addr + USBCMD,USBCMD_RS | USBCMD_CF | USBCMD_MAXP);
+}
+
+/* Initialize the skeleton
+ */
+void usb_init_skel(void)
+{
+ unsigned long temp;
+ int n;
+
+ for(n=0;n<USB_MAX_TEMP_INT_TD;n++)
+ tmp_int_td[n].dev_ptr=0L; /* no devices connected */
+ /* last td */
+ usb_fill_td(&td_last,UHCI_PTR_TERM,TD_CTRL_IOC ,0,0,0L);
+ /* usb_fill_td(&td_last,UHCI_PTR_TERM,0,0,0); */
+ /* End Queue Header */
+ usb_fill_qh(&qh_end,UHCI_PTR_TERM,(unsigned long)&td_last);
+ /* Bulk Queue Header */
+ temp=(unsigned long)&qh_end;
+ usb_fill_qh(&qh_bulk,temp | UHCI_PTR_QH,UHCI_PTR_TERM);
+ /* Control Queue Header */
+ temp=(unsigned long)&qh_bulk;
+ usb_fill_qh(&qh_cntrl, temp | UHCI_PTR_QH,UHCI_PTR_TERM);
+ /* 1ms Interrupt td */
+ temp=(unsigned long)&qh_cntrl;
+ usb_fill_td(&td_int[0],temp | UHCI_PTR_QH,0,0,0,0L);
+ temp=(unsigned long)&td_int[0];
+ for(n=1; n<8; n++)
+ usb_fill_td(&td_int[n],temp,0,0,0,0L);
+ for (n = 0; n < 1024; n++) {
+ /* link all framelist pointers to one of the interrupts */
+ int m, o;
+ if ((n&127)==127)
+ framelist[n]= swap_32((unsigned long)&td_int[0]);
+ else
+ for (o = 1, m = 2; m <= 128; o++, m += m)
+ if ((n & (m - 1)) == ((m - 1) / 2))
+ framelist[n]= swap_32((unsigned long)&td_int[o]);
+ }
+}
+
+/* check the common skeleton for completed transfers, and update the status
+ * of the "connected" device. Called from the IRQ routine.
+ */
+void usb_check_skel(void)
+{
+ struct usb_device *dev;
+ /* start with the control qh */
+ if(qh_cntrl.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */
+ {
+ dev=(struct usb_device *)qh_cntrl.dev_ptr;
+ usb_get_td_status(&tmp_td[0],dev); /* update status */
+ if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
+ qh_cntrl.dev_ptr=0;
+ }
+ }
+ /* now process the bulk */
+ if(qh_bulk.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */
+ {
+ dev=(struct usb_device *)qh_bulk.dev_ptr;
+ usb_get_td_status(&tmp_td[0],dev); /* update status */
+ if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
+ qh_bulk.dev_ptr=0;
+ }
+ }
+}
+
+/* check the interrupt chain, ubdate the status of the appropriate device,
+ * call the appropriate irqhandler and reactivate the TD if the irqhandler
+ * returns with 1
+ */
+void usb_check_int_chain(void)
+{
+ int i,res;
+ unsigned long link,status;
+ struct usb_device *dev;
+ uhci_td_t *td,*prevtd;
+
+ for(i=0;i<8;i++) {
+ prevtd=&td_int[i]; /* the first previous td is the skeleton td */
+ link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */
+ td=(uhci_td_t *)link; /* assign it */
+ /* all interrupt TDs are finally linked to the td_int[0].
+ * so we process all until we find the td_int[0].
+ * if int0 chain points to a QH, we're also done
+ */
+ while(((i>0) && (link != (unsigned long)&td_int[0])) ||
+ ((i==0) && !(swap_32(td->link) & UHCI_PTR_QH)))
+ {
+ /* check if a device is assigned with this td */
+ status=swap_32(td->status);
+ if((td->dev_ptr!=0L) && !(status & TD_CTRL_ACTIVE)) {
+ /* td is not active and a device is assigned -> call irqhandler */
+ dev=(struct usb_device *)td->dev_ptr;
+ dev->irq_act_len=((status & 0x7FF)==0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */
+ dev->irq_status=usb_uhci_td_stat(status); /* get status */
+ res=dev->irq_handle(dev); /* call irqhandler */
+ if(res==1) {
+ /* reactivate */
+ status|=TD_CTRL_ACTIVE;
+ td->status=swap_32(status);
+ prevtd=td; /* previous td = this td */
+ }
+ else {
+ prevtd->link=td->link; /* link previous td directly to the nex td -> unlinked */
+ /* remove device pointer */
+ td->dev_ptr=0L;
+ }
+ } /* if we call the irq handler */
+ link=swap_32(td->link) & 0xfffffff0; /* next in chain */
+ td=(uhci_td_t *)link; /* assign it */
+ } /* process all td in this int chain */
+ } /* next interrupt chain */
+}
+
+
+/* usb interrupt service routine.
+ */
+void handle_usb_interrupt(void)
+{
+ unsigned short status;
+
+ /*
+ * Read the interrupt status, and write it back to clear the
+ * interrupt cause
+ */
+
+ status = in16r(usb_base_addr + USBSTS);
+
+ if (!status) /* shared interrupt, not mine */
+ return;
+ if (status != 1) {
+ /* remove host controller halted state */
+ if ((status&0x20) && ((in16r(usb_base_addr+USBCMD) && USBCMD_RS)==0)) {
+ out16r(usb_base_addr + USBCMD, USBCMD_RS | in16r(usb_base_addr + USBCMD));
+ }
+ }
+ usb_check_int_chain(); /* call interrupt handlers for int tds */
+ usb_check_skel(); /* call completion handler for common transfer routines */
+ out16r(usb_base_addr+USBSTS,status);
+}
+
+
+/* init uhci
+ */
+int usb_lowlevel_init(void)
+{
+ unsigned char temp;
+ int busdevfunc;
+
+ busdevfunc=pci_find_device(USB_UHCI_VEND_ID,USB_UHCI_DEV_ID,0); /* get PCI Device ID */
+ if(busdevfunc==-1) {
+ printf("Error USB UHCI (%04X,%04X) not found\n",USB_UHCI_VEND_ID,USB_UHCI_DEV_ID);
+ return -1;
+ }
+ pci_read_config_byte(busdevfunc,PCI_INTERRUPT_LINE,&temp);
+ irqvec = temp;
+ irq_free_handler(irqvec);
+ USB_UHCI_PRINTF("Interrupt Line = %d, is %d\n",irqvec);
+ pci_read_config_byte(busdevfunc,PCI_INTERRUPT_PIN,&temp);
+ USB_UHCI_PRINTF("Interrupt Pin = %ld\n",temp);
+ pci_read_config_dword(busdevfunc,PCI_BASE_ADDRESS_4,&usb_base_addr);
+ USB_UHCI_PRINTF("IO Base Address = 0x%lx\n",usb_base_addr);
+ usb_base_addr&=0xFFFFFFF0;
+ usb_base_addr+=CFG_ISA_IO_BASE_ADDRESS;
+ rh.devnum = 0;
+ usb_init_skel();
+ reset_hc();
+ start_hc();
+ irq_install_handler(irqvec, (interrupt_handler_t *)handle_usb_interrupt, NULL);
+ return 0;
+}
+
+/* stop uhci
+ */
+int usb_lowlevel_stop(void)
+{
+ if(irqvec==-1)
+ return 1;
+ irq_free_handler(irqvec);
+ reset_hc();
+ irqvec=-1;
+ return 0;
+}
+
+/*******************************************************************************************
+ * Virtual Root Hub
+ * Since the uhci does not have a real HUB, we simulate one ;-)
+ */
+#undef USB_RH_DEBUG
+
+#ifdef USB_RH_DEBUG
+#define USB_RH_PRINTF(fmt,args...) printf (fmt ,##args)
+static void usb_display_wValue(unsigned short wValue,unsigned short wIndex);
+static void usb_display_Req(unsigned short req);
+#else
+#define USB_RH_PRINTF(fmt,args...)
+static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) {}
+static void usb_display_Req(unsigned short req) {}
+#endif
+
+static unsigned char root_hub_dev_des[] =
+{
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x00, /* __u16 bcdUSB; v1.0 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x01, /* __u8 iManufacturer; */
+ 0x00, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+
+/* Configuration descriptor */
+static unsigned char root_hub_config_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x08, /* __u16 ep_wMaxPacketSize; 8 Bytes */
+ 0x00,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+
+static unsigned char root_hub_hub_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x29, /* __u8 bDescriptorType; Hub-descriptor */
+ 0x02, /* __u8 bNbrPorts; */
+ 0x00, /* __u16 wHubCharacteristics; */
+ 0x00,
+ 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
+ 0x00, /* __u8 bHubContrCurrent; 0 mA */
+ 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */
+ 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
+};
+
+static unsigned char root_hub_str_index0[] =
+{
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static unsigned char root_hub_str_index1[] =
+{
+ 28, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'U', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'C', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'I', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+
+
+/*
+ * Root Hub Control Pipe (interrupt Pipes are not supported)
+ */
+
+
+int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len,struct devrequest *cmd)
+{
+ void *data = buffer;
+ int leni = transfer_len;
+ int len = 0;
+ int status = 0;
+ int stat = 0;
+ int i;
+
+ unsigned short cstatus;
+
+ unsigned short bmRType_bReq;
+ unsigned short wValue;
+ unsigned short wIndex;
+ unsigned short wLength;
+
+ if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+ printf("Root-Hub submit IRQ: NOT implemented\n");
+#if 0
+ uhci->rh.urb = urb;
+ uhci->rh.send = 1;
+ uhci->rh.interval = urb->interval;
+ rh_init_int_timer (urb);
+#endif
+ return 0;
+ }
+ bmRType_bReq = cmd->requesttype | cmd->request << 8;
+ wValue = swap_16(cmd->value);
+ wIndex = swap_16(cmd->index);
+ wLength = swap_16(cmd->length);
+ usb_display_Req(bmRType_bReq);
+ for (i = 0; i < 8; i++)
+ rh.c_p_r[i] = 0;
+ USB_RH_PRINTF("Root-Hub: adr: %2x cmd(%1x): %02x%02x %04x %04x %04x\n",
+ dev->devnum, 8, cmd->requesttype,cmd->request, wValue, wIndex, wLength);
+
+ switch (bmRType_bReq) {
+ /* Request Destination:
+ without flags: Device,
+ RH_INTERFACE: interface,
+ RH_ENDPOINT: endpoint,
+ RH_CLASS means HUB here,
+ RH_OTHER | RH_CLASS almost ever means HUB_PORT here
+ */
+
+ case RH_GET_STATUS:
+ *(unsigned short *) data = swap_16(1);
+ len=2;
+ break;
+ case RH_GET_STATUS | RH_INTERFACE:
+ *(unsigned short *) data = swap_16(0);
+ len=2;
+ break;
+ case RH_GET_STATUS | RH_ENDPOINT:
+ *(unsigned short *) data = swap_16(0);
+ len=2;
+ break;
+ case RH_GET_STATUS | RH_CLASS:
+ *(unsigned long *) data = swap_32(0);
+ len=4;
+ break; /* hub power ** */
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+
+ status = in16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1));
+ cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) |
+ ((status & USBPORTSC_PEC) >> (3 - 1)) |
+ (rh.c_p_r[wIndex - 1] << (0 + 4));
+ status = (status & USBPORTSC_CCS) |
+ ((status & USBPORTSC_PE) >> (2 - 1)) |
+ ((status & USBPORTSC_SUSP) >> (12 - 2)) |
+ ((status & USBPORTSC_PR) >> (9 - 4)) |
+ (1 << 8) | /* power on ** */
+ ((status & USBPORTSC_LSDA) << (-8 + 9));
+
+ *(unsigned short *) data = swap_16(status);
+ *(unsigned short *) (data + 2) = swap_16(cstatus);
+ len=4;
+ break;
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ switch (wValue) {
+ case (RH_ENDPOINT_STALL):
+ len=0;
+ break;
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ switch (wValue) {
+ case (RH_C_HUB_OVER_CURRENT):
+ len=0; /* hub power over current ** */
+ break;
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ usb_display_wValue(wValue,wIndex);
+ switch (wValue) {
+ case (RH_PORT_ENABLE):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) & ~USBPORTSC_PE;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ case (RH_PORT_SUSPEND):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) & ~USBPORTSC_SUSP;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ case (RH_PORT_POWER):
+ len=0; /* port power ** */
+ break;
+ case (RH_C_PORT_CONNECTION):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) | USBPORTSC_CSC;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ case (RH_C_PORT_ENABLE):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) | USBPORTSC_PEC;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ case (RH_C_PORT_SUSPEND):
+/*** WR_RH_PORTSTAT(RH_PS_PSSC); */
+ len=0;
+ break;
+ case (RH_C_PORT_OVER_CURRENT):
+ len=0;
+ break;
+ case (RH_C_PORT_RESET):
+ rh.c_p_r[wIndex - 1] = 0;
+ len=0;
+ break;
+ }
+ break;
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ usb_display_wValue(wValue,wIndex);
+ switch (wValue) {
+ case (RH_PORT_SUSPEND):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) | USBPORTSC_SUSP;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ case (RH_PORT_RESET):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) | USBPORTSC_PR;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ wait_ms(10);
+ status = (status & 0xfff5) & ~USBPORTSC_PR;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ udelay(10);
+ status = (status & 0xfff5) | USBPORTSC_PE;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ wait_ms(10);
+ status = (status & 0xfff5) | 0xa;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ case (RH_PORT_POWER):
+ len=0; /* port power ** */
+ break;
+ case (RH_PORT_ENABLE):
+ status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1));
+ status = (status & 0xfff5) | USBPORTSC_PE;
+ out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status);
+ len=0;
+ break;
+ }
+ break;
+
+ case RH_SET_ADDRESS:
+ rh.devnum = wValue;
+ len=0;
+ break;
+ case RH_GET_DESCRIPTOR:
+ switch ((wValue & 0xff00) >> 8) {
+ case (0x01): /* device descriptor */
+ i=sizeof(root_hub_config_des);
+ status=i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy (data, root_hub_dev_des, len);
+ break;
+ case (0x02): /* configuration descriptor */
+ i=sizeof(root_hub_config_des);
+ status=i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy (data, root_hub_config_des, len);
+ break;
+ case (0x03): /*string descriptors */
+ if(wValue==0x0300) {
+ i=sizeof(root_hub_str_index0);
+ status = i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy (data, root_hub_str_index0, len);
+ break;
+ }
+ if(wValue==0x0301) {
+ i=sizeof(root_hub_str_index1);
+ status = i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy (data, root_hub_str_index1, len);
+ break;
+ }
+ stat = USB_ST_STALLED;
+ }
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ root_hub_hub_des[2] = 2;
+ i=sizeof(root_hub_hub_des);
+ status= i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy (data, root_hub_hub_des, len);
+ break;
+ case RH_GET_CONFIGURATION:
+ *(unsigned char *) data = 0x01;
+ len = 1;
+ break;
+ case RH_SET_CONFIGURATION:
+ len=0;
+ break;
+ default:
+ stat = USB_ST_STALLED;
+ }
+ USB_RH_PRINTF("Root-Hub stat %lx port1: %x port2: %x\n\n",stat,
+ in16r(usb_base_addr + USBPORTSC1), in16r(usb_base_addr + USBPORTSC2));
+ dev->act_len=len;
+ dev->status=stat;
+ return stat;
+
+}
+
+/********************************************************************************
+ * Some Debug Routines
+ */
+
+#ifdef USB_RH_DEBUG
+
+static void usb_display_Req(unsigned short req)
+{
+ USB_RH_PRINTF("- Root-Hub Request: ");
+ switch (req) {
+ case RH_GET_STATUS:
+ USB_RH_PRINTF("Get Status ");
+ break;
+ case RH_GET_STATUS | RH_INTERFACE:
+ USB_RH_PRINTF("Get Status Interface ");
+ break;
+ case RH_GET_STATUS | RH_ENDPOINT:
+ USB_RH_PRINTF("Get Status Endpoint ");
+ break;
+ case RH_GET_STATUS | RH_CLASS:
+ USB_RH_PRINTF("Get Status Class");
+ break; /* hub power ** */
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ USB_RH_PRINTF("Get Status Class Others");
+ break;
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ USB_RH_PRINTF("Clear Feature Endpoint ");
+ break;
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ USB_RH_PRINTF("Clear Feature Class ");
+ break;
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ USB_RH_PRINTF("Clear Feature Other Class ");
+ break;
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ USB_RH_PRINTF("Set Feature Other Class ");
+ break;
+ case RH_SET_ADDRESS:
+ USB_RH_PRINTF("Set Address ");
+ break;
+ case RH_GET_DESCRIPTOR:
+ USB_RH_PRINTF("Get Descriptor ");
+ break;
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ USB_RH_PRINTF("Get Descriptor Class ");
+ break;
+ case RH_GET_CONFIGURATION:
+ USB_RH_PRINTF("Get Configuration ");
+ break;
+ case RH_SET_CONFIGURATION:
+ USB_RH_PRINTF("Get Configuration ");
+ break;
+ default:
+ USB_RH_PRINTF("****UNKNOWN**** 0x%04X ",req);
+ }
+ USB_RH_PRINTF("\n");
+
+}
+
+static void usb_display_wValue(unsigned short wValue,unsigned short wIndex)
+{
+ switch (wValue) {
+ case (RH_PORT_ENABLE):
+ USB_RH_PRINTF("Root-Hub: Enable Port %d\n",wIndex);
+ break;
+ case (RH_PORT_SUSPEND):
+ USB_RH_PRINTF("Root-Hub: Suspend Port %d\n",wIndex);
+ break;
+ case (RH_PORT_POWER):
+ USB_RH_PRINTF("Root-Hub: Port Power %d\n",wIndex);
+ break;
+ case (RH_C_PORT_CONNECTION):
+ USB_RH_PRINTF("Root-Hub: C Port Connection Port %d\n",wIndex);
+ break;
+ case (RH_C_PORT_ENABLE):
+ USB_RH_PRINTF("Root-Hub: C Port Enable Port %d\n",wIndex);
+ break;
+ case (RH_C_PORT_SUSPEND):
+ USB_RH_PRINTF("Root-Hub: C Port Suspend Port %d\n",wIndex);
+ break;
+ case (RH_C_PORT_OVER_CURRENT):
+ USB_RH_PRINTF("Root-Hub: C Port Over Current Port %d\n",wIndex);
+ break;
+ case (RH_C_PORT_RESET):
+ USB_RH_PRINTF("Root-Hub: C Port reset Port %d\n",wIndex);
+ break;
+ default:
+ USB_RH_PRINTF("Root-Hub: unknown %x %x\n",wValue,wIndex);
+ break;
+ }
+}
+
+#endif
+
+
+#ifdef USB_UHCI_DEBUG
+
+static int usb_display_td(uhci_td_t *td)
+{
+ unsigned long tmp;
+ int valid;
+
+ printf("TD at %p:\n",td);
+
+ tmp=swap_32(td->link);
+ printf("Link points to 0x%08lX, %s first, %s, %s\n",tmp&0xfffffff0,
+ ((tmp & 0x4)==0x4) ? "Depth" : "Breath",
+ ((tmp & 0x2)==0x2) ? "QH" : "TD",
+ ((tmp & 0x1)==0x1) ? "invalid" : "valid");
+ valid=((tmp & 0x1)==0x0);
+ tmp=swap_32(td->status);
+ printf(" %s %ld Errors %s %s %s \n %s %s %s %s %s %s\n Len 0x%lX\n",
+ (((tmp>>29)&0x1)==0x1) ? "SPD Enable" : "SPD Disable",
+ ((tmp>>28)&0x3),
+ (((tmp>>26)&0x1)==0x1) ? "Low Speed" : "Full Speed",
+ (((tmp>>25)&0x1)==0x1) ? "ISO " : "",
+ (((tmp>>24)&0x1)==0x1) ? "IOC " : "",
+ (((tmp>>23)&0x1)==0x1) ? "Active " : "Inactive ",
+ (((tmp>>22)&0x1)==0x1) ? "Stalled" : "",
+ (((tmp>>21)&0x1)==0x1) ? "Data Buffer Error" : "",
+ (((tmp>>20)&0x1)==0x1) ? "Babble" : "",
+ (((tmp>>19)&0x1)==0x1) ? "NAK" : "",
+ (((tmp>>18)&0x1)==0x1) ? "Bitstuff Error" : "",
+ (tmp&0x7ff));
+ tmp=swap_32(td->info);
+ printf(" MaxLen 0x%lX\n",((tmp>>21)&0x7FF));
+ printf(" %s Endpoint 0x%lX Dev Addr 0x%lX PID 0x%lX\n",((tmp>>19)&0x1)==0x1 ? "TOGGLE" : "",
+ ((tmp>>15)&0xF),((tmp>>8)&0x7F),tmp&0xFF);
+ tmp=swap_32(td->buffer);
+ printf(" Buffer 0x%08lX\n",tmp);
+ printf(" DEV %08lX\n",td->dev_ptr);
+ return valid;
+}
+
+
+void usb_show_td(int max)
+{
+ int i;
+ if(max>0) {
+ for(i=0;i<max;i++) {
+ usb_display_td(&tmp_td[i]);
+ }
+ }
+ else {
+ i=0;
+ do {
+ printf("tmp_td[%d]\n",i);
+ }while(usb_display_td(&tmp_td[i++]));
+ }
+}
+
+
+#endif
+#endif /* CONFIG_USB_UHCI */
+
+/* EOF */
generated by cgit (git 2.34.1) at 2024-12-19 14:45:15 +0000