diff options
Diffstat (limited to 'board/exbitgen/init.S')
| -rwxr-xr-x | board/exbitgen/init.S | 1009 |
1 files changed, 1009 insertions, 0 deletions
diff --git a/board/exbitgen/init.S b/board/exbitgen/init.S new file mode 100755 index 0000000..0e6cd04 --- /dev/null +++ b/board/exbitgen/init.S @@ -0,0 +1,1009 @@ +/*----------------------------------------------------------------------+ + * + * This source code has been made available to you by IBM on an AS-IS + * basis. Anyone receiving this source is licensed under IBM + * copyrights to use it in any way he or she deems fit, including + * copying it, modifying it, compiling it, and redistributing it either + * with or without modifications. No license under IBM patents or + * patent applications is to be implied by the copyright license. + * + * Any user of this software should understand that IBM cannot provide + * technical support for this software and will not be responsible for + * any consequences resulting from the use of this software. + * + * Any person who transfers this source code or any derivative work + * must include the IBM copyright notice, this paragraph, and the + * preceding two paragraphs in the transferred software. + * + * COPYRIGHT I B M CORPORATION 1995 + * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M + *----------------------------------------------------------------------- + */ + +#include <config.h> +#include <ppc4xx.h> +#include "config.h" + +#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ +#define FPGA_BRDC 0xF0300004 + +#include <ppc_asm.tmpl> +#include <ppc_defs.h> + +#include <asm/cache.h> +#include <asm/mmu.h> + +#include "exbitgen.h" + +/* IIC declarations (This is an extract from 405gp_i2c.h, which also contains some */ +/* c-code declarations and consequently can't be included here). */ +/* (Possibly to be solved somehow else). */ +/*--------------------------------------------------------------------- */ +#define I2C_REGISTERS_BASE_ADDRESS 0xEF600500 +#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF) +#define IIC_SDBUF (I2C_REGISTERS_BASE_ADDRESS+IICSDBUF) +#define IIC_LMADR (I2C_REGISTERS_BASE_ADDRESS+IICLMADR) +#define IIC_HMADR (I2C_REGISTERS_BASE_ADDRESS+IICHMADR) +#define IIC_CNTL (I2C_REGISTERS_BASE_ADDRESS+IICCNTL) +#define IIC_MDCNTL (I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL) +#define IIC_STS (I2C_REGISTERS_BASE_ADDRESS+IICSTS) +#define IIC_EXTSTS (I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS) +#define IIC_LSADR (I2C_REGISTERS_BASE_ADDRESS+IICLSADR) +#define IIC_HSADR (I2C_REGISTERS_BASE_ADDRESS+IICHSADR) +#define IIC_CLKDIV (I2C_REGISTERS_BASE_ADDRESS+IICCLKDIV) +#define IIC_INTRMSK (I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK) +#define IIC_XFRCNT (I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT) +#define IIC_XTCNTLSS (I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS) +#define IIC_DIRECTCNTL (I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL) + +/* MDCNTL Register Bit definition */ +#define IIC_MDCNTL_HSCL 0x01 +#define IIC_MDCNTL_EUBS 0x02 +#define IIC_MDCNTL_FMDB 0x40 +#define IIC_MDCNTL_FSDB 0x80 + +/* CNTL Register Bit definition */ +#define IIC_CNTL_PT 0x01 +#define IIC_CNTL_READ 0x02 +#define IIC_CNTL_CHT 0x04 + +/* STS Register Bit definition */ +#define IIC_STS_PT 0X01 +#define IIC_STS_ERR 0X04 +#define IIC_STS_MDBS 0X20 + +/* EXTSTS Register Bit definition */ +#define IIC_EXTSTS_XFRA 0X01 +#define IIC_EXTSTS_ICT 0X02 +#define IIC_EXTSTS_LA 0X04 + +/* LED codes used for inditing progress and errors during read of DIMM SPD. */ +/*--------------------------------------------------------------------- */ +#define LED_SDRAM_CODE_1 0xef +#define LED_SDRAM_CODE_2 0xee +#define LED_SDRAM_CODE_3 0xed +#define LED_SDRAM_CODE_4 0xec +#define LED_SDRAM_CODE_5 0xeb +#define LED_SDRAM_CODE_6 0xea +#define LED_SDRAM_CODE_7 0xe9 +#define LED_SDRAM_CODE_8 0xe8 +#define LED_SDRAM_CODE_9 0xe7 +#define LED_SDRAM_CODE_10 0xe6 +#define LED_SDRAM_CODE_11 0xe5 +#define LED_SDRAM_CODE_12 0xe4 +#define LED_SDRAM_CODE_13 0xe3 +#define LED_SDRAM_CODE_14 0xe2 +#define LED_SDRAM_CODE_15 0xe1 +#define LED_SDRAM_CODE_16 0xe0 + + +#define TIMEBASE_10PS (1000000000 / CONFIG_SYS_CLK_FREQ) * 100 + +#define FLASH_8bit_AP 0x9B015480 +#define FLASH_8bit_CR 0xFFF18000 /* 1MB(min), 8bit, R/W */ + +#define FLASH_32bit_AP 0x9B015480 +#define FLASH_32bit_CR 0xFFE3C000 /* 2MB, 32bit, R/W */ + + +#define WDCR_EBC(reg,val) addi r4,0,reg;\ + mtdcr ebccfga,r4;\ + addis r4,0,val@h;\ + ori r4,r4,val@l;\ + mtdcr ebccfgd,r4 + +/*--------------------------------------------------------------------- + * Function: ext_bus_cntlr_init + * Description: Initializes the External Bus Controller for the external + * peripherals. IMPORTANT: For pass1 this code must run from + * cache since you can not reliably change a peripheral banks + * timing register (pbxap) while running code from that bank. + * For ex., since we are running from ROM on bank 0, we can NOT + * execute the code that modifies bank 0 timings from ROM, so + * we run it from cache. + * Bank 0 - Boot flash + * Bank 1-4 - application flash + * Bank 5 - CPLD + * Bank 6 - not used + * Bank 7 - Heathrow chip + *--------------------------------------------------------------------- + */ + .globl ext_bus_cntlr_init +ext_bus_cntlr_init: + mflr r4 /* save link register */ + bl ..getAddr +..getAddr: + mflr r3 /* get address of ..getAddr */ + mtlr r4 /* restore link register */ + addi r4,0,14 /* set ctr to 10; used to prefetch */ + mtctr r4 /* 10 cache lines to fit this function */ + /* in cache (gives us 8x10=80 instrctns) */ +..ebcloop: + icbt r0,r3 /* prefetch cache line for addr in r3 */ + addi r3,r3,32 /* move to next cache line */ + bdnz ..ebcloop /* continue for 10 cache lines */ + + mflr r31 /* save link register */ + + /*----------------------------------------------------------- + * Delay to ensure all accesses to ROM are complete before changing + * bank 0 timings. 200usec should be enough. + * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles + *----------------------------------------------------------- + */ + + addis r3,0,0x0 + ori r3,r3,0xA000 /* ensure 200usec have passed since reset */ + mtctr r3 +..spinlp: + bdnz ..spinlp /* spin loop */ + + /*--------------------------------------------------------------- + * Memory Bank 0 (Boot Flash) initialization + *--------------------------------------------------------------- + */ + WDCR_EBC(pb0ap, FLASH_32bit_AP) + WDCR_EBC(pb0cr, 0xffe38000) +/*pnc WDCR_EBC(pb0cr, FLASH_32bit_CR) */ + + /*--------------------------------------------------------------- + * Memory Bank 5 (CPLD) initialization + *--------------------------------------------------------------- + */ + WDCR_EBC(pb5ap, 0x01010040) +/*jsa recommendation: WDCR_EBC(pb5ap, 0x00010040) */ + WDCR_EBC(pb5cr, 0x10038000) + + /*--------------------------------------------------------------- */ + /* Memory Bank 6 (not used) initialization */ + /*--------------------------------------------------------------- */ + WDCR_EBC(pb6cr, 0x00000000) + + /* Read HW ID to determine whether old H2 board or new generic CPU board */ + addis r3, 0, HW_ID_ADDR@h + ori r3, r3, HW_ID_ADDR@l + lbz r3,0x0000(r3) + cmpi 0, r3, 1 /* if (HW_ID==1) */ + beq setup_h2evalboard /* then jump */ + cmpi 0, r3, 2 /* if (HW_ID==2) */ + beq setup_genieboard /* then jump */ + cmpi 0, r3, 3 /* if (HW_ID==3) */ + beq setup_genieboard /* then jump */ + +setup_genieboard: + /*--------------------------------------------------------------- */ + /* Memory Bank 1 (Application Flash) initialization for generic CPU board */ + /*--------------------------------------------------------------- */ +/* WDCR_EBC(pb1ap, 0x7b015480) /###* T.B.M. */ +/* WDCR_EBC(pb1ap, 0x7F8FFE80) /###* T.B.M. */ + WDCR_EBC(pb1ap, 0x9b015480) /* hlb-20020207: burst 8 bit 6 cycles */ + +/* WDCR_EBC(pb1cr, 0x20098000) /###* 16 MB */ + WDCR_EBC(pb1cr, 0x200B8000) /* 32 MB */ + + /*--------------------------------------------------------------- */ + /* Memory Bank 4 (Onboard FPGA) initialization for generic CPU board */ + /*--------------------------------------------------------------- */ + WDCR_EBC(pb4ap, 0x01010000) /* */ + WDCR_EBC(pb4cr, 0x1021c000) /* */ + + /*--------------------------------------------------------------- */ + /* Memory Bank 7 (Heathrow chip on Reference board) initialization */ + /*--------------------------------------------------------------- */ + WDCR_EBC(pb7ap, 0x200ffe80) /* No Ready, many wait states (let reflections die out) */ + WDCR_EBC(pb7cr, 0X4001A000) + + bl setup_continue + + +setup_h2evalboard: + /*--------------------------------------------------------------- */ + /* Memory Bank 1 (Application Flash) initialization */ + /*--------------------------------------------------------------- */ + WDCR_EBC(pb1ap, 0x7b015480) /* T.B.M. */ +/*3010 WDCR_EBC(pb1ap, 0x7F8FFE80) /###* T.B.M. */ + WDCR_EBC(pb1cr, 0x20058000) + + /*--------------------------------------------------------------- */ + /* Memory Bank 2 (Application Flash) initialization */ + /*--------------------------------------------------------------- */ + WDCR_EBC(pb2ap, 0x7b015480) /* T.B.M. */ +/*3010 WDCR_EBC(pb2ap, 0x7F8FFE80) /###* T.B.M. */ + WDCR_EBC(pb2cr, 0x20458000) + + /*--------------------------------------------------------------- */ + /* Memory Bank 3 (Application Flash) initialization */ + /*--------------------------------------------------------------- */ + WDCR_EBC(pb3ap, 0x7b015480) /* T.B.M. */ +/*3010 WDCR_EBC(pb3ap, 0x7F8FFE80) /###* T.B.M. */ + WDCR_EBC(pb3cr, 0x20858000) + + /*--------------------------------------------------------------- */ + /* Memory Bank 4 (Application Flash) initialization */ + /*--------------------------------------------------------------- */ + WDCR_EBC(pb4ap, 0x7b015480) /* T.B.M. */ +/*3010 WDCR_EBC(pb4ap, 0x7F8FFE80) /###* T.B.M. */ + WDCR_EBC(pb4cr, 0x20C58000) + + /*--------------------------------------------------------------- */ + /* Memory Bank 7 (Heathrow chip) initialization */ + /*--------------------------------------------------------------- */ + WDCR_EBC(pb7ap, 0x02000280) /* No Ready, 4 wait states */ + WDCR_EBC(pb7cr, 0X4001A000) + +setup_continue: + + + mtlr r31 /* restore lr */ + nop /* pass2 DCR errata #8 */ + blr + +/*--------------------------------------------------------------------- */ +/* Function: sdram_init */ +/* Description: Configures SDRAM memory banks. */ +/*--------------------------------------------------------------------- */ + .globl sdram_init + +sdram_init: +#if CFG_MONITOR_BASE < CFG_FLASH_BASE + blr +#else + mflr r31 + + /* output SDRAM code on LEDs */ + addi r4, 0, LED_SDRAM_CODE_1 + addis r5, 0, 0x1000 + ori r5, r5, 0x0001 + stb r4,0(r5) + eieio + + /* Read contents of spd */ + /*--------------------- */ + bl read_spd + + /*----------------------------------------------------------- */ + /* */ + /* */ + /* Update SDRAM timing register */ + /* */ + /* */ + /*----------------------------------------------------------- */ + + /* Read PLL feedback divider and calculate clock period of local bus in */ + /* granularity of 10 ps. Save clock period in r30 */ + /*-------------------------------------------------------------- */ + mfdcr r4, pllmd + addi r9, 0, 25 + srw r4, r4, r9 + andi. r4, r4, 0x07 + addis r5, 0, TIMEBASE_10PS@h + ori r5, r5, TIMEBASE_10PS@l + divwu r30, r5, r4 + + /* Determine CASL */ + /*--------------- */ + bl find_casl /* Returns CASL in r3 */ + + /* Calc trp_clocks = (trp * 100 + (clk - 1)) / clk */ + /* (trp read from byte 27 in granularity of 1 ns) */ + /*------------------------------------------------ */ + mulli r16, r16, 100 + add r16, r16, r30 + addi r6, 0, 1 + subf r16, r6, r16 + divwu r16, r16, r30 + + /* Calc trcd_clocks = (trcd * 100 + (clk - 1) ) / clk */ + /* (trcd read from byte 29 in granularity of 1 ns) */ + /*--------------------------------------------------- */ + mulli r17, r17, 100 + add r17, r17, r30 + addi r6, 0, 1 + subf r17, r6, r17 + divwu r17, r17, r30 + + /* Calc tras_clocks = (tras * 100 + (clk - 1) ) / clk */ + /* (tras read from byte 30 in granularity of 1 ns) */ + /*--------------------------------------------------- */ + mulli r18, r18, 100 + add r18, r18, r30 + addi r6, 0, 1 + subf r18, r6, r18 + divwu r18, r18, r30 + + /* Calc trc_clocks = trp_clocks + tras_clocks */ + /*------------------------------------------- */ + add r18, r18, r16 + + /* CASL value */ + /*----------- */ + addi r9, 0, 23 + slw r4, r3, r9 + + /* PTA = trp_clocks - 1 */ + /*--------------------- */ + addi r6, 0, 1 + subf r5, r6, r16 + addi r9, 0, 18 + slw r5, r5, r9 + or r4, r4, r5 + + /* CTP = trc_clocks - trp_clocks - trcd_clocks - 1 */ + /*------------------------------------------------ */ + addi r5, r18, 0 + subf r5, r16, r5 + subf r5, r17, r5 + addi r6, 0, 1 + subf r5, r6, r5 + addi r9, 0, 16 + slw r5, r5, r9 + or r4, r4, r5 + + /* LDF = 1 */ + /*-------- */ + ori r4, r4, 0x4000 + + /* RFTA = trc_clocks - 4 */ + /*---------------------- */ + addi r6, 0, 4 + subf r5, r6, r18 + addi r9, 0, 2 + slw r5, r5, r9 + or r4, r4, r5 + + /* RCD = trcd_clocks - 1 */ + /*---------------------- */ + addi r6, 0, 1 + subf r5, r6, r17 + or r4, r4, r5 + + /*----------------------------------------------------------- */ + /* Set SDTR1 */ + /*----------------------------------------------------------- */ + addi r5,0,mem_sdtr1 + mtdcr memcfga,r5 + mtdcr memcfgd,r4 + + /*----------------------------------------------------------- */ + /* */ + /* */ + /* Update memory bank 0-3 configuration registers */ + /* */ + /* */ + /*----------------------------------------------------------- */ + + /* Build contents of configuration register for bank 0 into r6 */ + /*------------------------------------------------------------ */ + bl find_mode /* returns addressing mode in r3 */ + addi r29, r3, 0 /* save mode temporarily in r29 */ + bl find_size_code /* returns size code in r3 */ + addi r9, 0, 17 /* bit offset of size code in configuration register */ + slw r3, r3, r9 /* */ + addi r9, 0, 13 /* bit offset of addressing mode in configuration register */ + slw r29, r29, r9 /* */ + or r3, r29, r3 /* merge size code and addressing mode */ + ori r6, r3, CFG_SDRAM_BASE + 1 /* insert base address and enable bank */ + + /* Calculate banksize r15 = (density << 22) / 2 */ + /*--------------------------------------------- */ + addi r9, 0, 21 + slw r15, r15, r9 + + /* Set SDRAM bank 0 register and adjust r6 for next bank */ + /*------------------------------------------------------ */ + addi r7,0,mem_mb0cf + mtdcr memcfga,r7 + mtdcr memcfgd,r6 + + add r6, r6, r15 /* add bank size to base address for next bank */ + + /* If two rows/banks then set SDRAM bank 1 register and adjust r6 for next bank */ + /*---------------------------------------------------------------------------- */ + cmpi 0, r12, 2 + bne b1skip + + addi r7,0,mem_mb1cf + mtdcr memcfga,r7 + mtdcr memcfgd,r6 + + add r6, r6, r15 /* add bank size to base address for next bank */ + + /* Set SDRAM bank 2 register and adjust r6 for next bank */ + /*------------------------------------------------------ */ +b1skip: addi r7,0,mem_mb2cf + mtdcr memcfga,r7 + mtdcr memcfgd,r6 + + add r6, r6, r15 /* add bank size to base address for next bank */ + + /* If two rows/banks then set SDRAM bank 3 register */ + /*------------------------------------------------ */ + cmpi 0, r12, 2 + bne b3skip + + addi r7,0,mem_mb3cf + mtdcr memcfga,r7 + mtdcr memcfgd,r6 +b3skip: + + /*----------------------------------------------------------- */ + /* Set RTR */ + /*----------------------------------------------------------- */ + cmpi 0, r30, 1600 + bge rtr_1 + addis r7, 0, 0x05F0 /* RTR value for 100Mhz */ + bl rtr_2 +rtr_1: addis r7, 0, 0x03F8 +rtr_2: addi r4,0,mem_rtr + mtdcr memcfga,r4 + mtdcr memcfgd,r7 + + /*----------------------------------------------------------- */ + /* Delay to ensure 200usec have elapsed since reset. Assume worst */ + /* case that the core is running 200Mhz: */ + /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */ + /*----------------------------------------------------------- */ + addis r3,0,0x0000 + ori r3,r3,0xA000 /* ensure 200usec have passed since reset */ + mtctr r3 +..spinlp2: + bdnz ..spinlp2 /* spin loop */ + + /*----------------------------------------------------------- */ + /* Set memory controller options reg, MCOPT1. */ + /* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */ + /* read/prefetch. */ + /*----------------------------------------------------------- */ + addi r4,0,mem_mcopt1 + mtdcr memcfga,r4 + addis r4,0,0x80C0 /* set DC_EN=1 */ + ori r4,r4,0x0000 + mtdcr memcfgd,r4 + + + /*----------------------------------------------------------- */ + /* Delay to ensure 10msec have elapsed since reset. This is */ + /* required for the MPC952 to stabalize. Assume worst */ + /* case that the core is running 200Mhz: */ + /* 200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */ + /* This delay should occur before accessing SDRAM. */ + /*----------------------------------------------------------- */ + addis r3,0,0x001E + ori r3,r3,0x8480 /* ensure 10msec have passed since reset */ + mtctr r3 +..spinlp3: + bdnz ..spinlp3 /* spin loop */ + + /* output SDRAM code on LEDs */ + addi r4, 0, LED_SDRAM_CODE_16 + addis r5, 0, 0x1000 + ori r5, r5, 0x0001 + stb r4,0(r5) + eieio + + mtlr r31 /* restore lr */ + blr + +/*--------------------------------------------------------------------- */ +/* Function: read_spd */ +/* Description: Reads contents of SPD and saves parameters to be used for */ +/* configuration in dedicated registers (see code below). */ +/*--------------------------------------------------------------------- */ + +#define WRITE_I2C(reg,val) \ + addi r3,0,val;\ + addis r4, 0, 0xef60;\ + ori r4, r4, 0x0500 + reg;\ + stb r3, 0(r4);\ + eieio + +#define READ_I2C(reg) \ + addis r3, 0, 0xef60;\ + ori r3, r3, 0x0500 + reg;\ + lbz r3, 0x0000(r3);\ + eieio + +read_spd: + + mflr r5 + + /* Initialize i2c */ + /*--------------- */ + WRITE_I2C(IICLMADR, 0x00) /* clear lo master address */ + WRITE_I2C(IICHMADR, 0x00) /* clear hi master address */ + WRITE_I2C(IICLSADR, 0x00) /* clear lo slave address */ + WRITE_I2C(IICHSADR, 0x00) /* clear hi slave address */ + WRITE_I2C(IICSTS, 0x08) /* update status register */ + WRITE_I2C(IICEXTSTS, 0x8f) + WRITE_I2C(IICCLKDIV, 0x05) + WRITE_I2C(IICINTRMSK, 0x00) /* no interrupts */ + WRITE_I2C(IICXFRCNT, 0x00) /* clear transfer count */ + WRITE_I2C(IICXTCNTLSS, 0xf0) /* clear extended control & stat */ + WRITE_I2C(IICMDCNTL, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB) /* mode control */ + READ_I2C(IICMDCNTL) + ori r3, r3, IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL + WRITE_I2C(IICMDCNTL, r3) /* mode control */ + WRITE_I2C(IICCNTL, 0x00) /* clear control reg */ + + /* Wait until initialization completed */ + /*------------------------------------ */ + bl wait_i2c_transfer_done + + WRITE_I2C(IICHMADR, 0x00) /* 7-bit addressing */ + WRITE_I2C(IICLMADR, SDRAM_SPD_WRITE_ADDRESS) + + /* Write 0 into buffer(start address) */ + /*----------------------------------- */ + WRITE_I2C(IICMDBUF, 0x00); + + /* Wait a little */ + /*-------------- */ + addis r3,0,0x0000 + ori r3,r3,0xA000 + mtctr r3 +in02: bdnz in02 + + /* Issue write command */ + /*-------------------- */ + WRITE_I2C(IICCNTL, IIC_CNTL_PT) + bl wait_i2c_transfer_done + + /* Read 128 bytes */ + /*--------------- */ + addi r7, 0, 0 /* byte counter in r7 */ + addi r8, 0, 0 /* checksum in r8 */ +rdlp: + /* issue read command */ + /*------------------- */ + cmpi 0, r7, 127 + blt rd01 + WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_PT) + bl rd02 +rd01: WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_CHT | IIC_CNTL_PT) +rd02: bl wait_i2c_transfer_done + + /* Fetch byte from buffer */ + /*----------------------- */ + READ_I2C(IICMDBUF) + + /* Retrieve parameters that are going to be used during configuration. */ + /* Save them in dedicated registers. */ + /*------------------------------------------------------------ */ + cmpi 0, r7, 3 /* Save byte 3 in r10 */ + bne rd10 + addi r10, r3, 0 +rd10: cmpi 0, r7, 4 /* Save byte 4 in r11 */ + bne rd11 + addi r11, r3, 0 +rd11: cmpi 0, r7, 5 /* Save byte 5 in r12 */ + bne rd12 + addi r12, r3, 0 +rd12: cmpi 0, r7, 17 /* Save byte 17 in r13 */ + bne rd13 + addi r13, r3, 0 +rd13: cmpi 0, r7, 18 /* Save byte 18 in r14 */ + bne rd14 + addi r14, r3, 0 +rd14: cmpi 0, r7, 31 /* Save byte 31 in r15 */ + bne rd15 + addi r15, r3, 0 +rd15: cmpi 0, r7, 27 /* Save byte 27 in r16 */ + bne rd16 + addi r16, r3, 0 +rd16: cmpi 0, r7, 29 /* Save byte 29 in r17 */ + bne rd17 + addi r17, r3, 0 +rd17: cmpi 0, r7, 30 /* Save byte 30 in r18 */ + bne rd18 + addi r18, r3, 0 +rd18: cmpi 0, r7, 9 /* Save byte 9 in r19 */ + bne rd19 + addi r19, r3, 0 +rd19: cmpi 0, r7, 23 /* Save byte 23 in r20 */ + bne rd20 + addi r20, r3, 0 +rd20: cmpi 0, r7, 25 /* Save byte 25 in r21 */ + bne rd21 + addi r21, r3, 0 +rd21: + + /* Calculate checksum of the first 63 bytes */ + /*----------------------------------------- */ + cmpi 0, r7, 63 + bgt rd31 + beq rd30 + add r8, r8, r3 + bl rd31 + + /* Verify checksum at byte 63 */ + /*--------------------------- */ +rd30: andi. r8, r8, 0xff /* use only 8 bits */ + cmp 0, r8, r3 + beq rd31 + addi r4, 0, LED_SDRAM_CODE_8 + addis r5, 0, 0x1000 + ori r5, r5, 0x0001 + stb r4,0(r5) + eieio +rderr: bl rderr + +rd31: + + /* Increment byte counter and check whether all bytes have been read. */ + /*------------------------------------------------------------------- */ + addi r7, r7, 1 + cmpi 0, r7, 127 + bgt rd05 + bl rdlp +rd05: + mtlr r5 /* restore lr */ + blr + +wait_i2c_transfer_done: + mflr r6 +wt01: READ_I2C(IICSTS) + andi. r4, r3, IIC_STS_PT + cmpi 0, r4, IIC_STS_PT + beq wt01 + mtlr r6 /* restore lr */ + blr + +/*--------------------------------------------------------------------- */ +/* Function: find_mode */ +/* Description: Determines addressing mode to be used dependent on */ +/* number of rows (r10 = byte 3 from SPD), number of columns (r11 = */ +/* byte 4 from SPD) and number of banks (r13 = byte 17 from SPD). */ +/* mode is returned in r3. */ +/* (It would be nicer having a table, pnc). */ +/*--------------------------------------------------------------------- */ +find_mode: + + mflr r5 + + cmpi 0, r10, 11 + bne fm01 + cmpi 0, r11, 9 + bne fm01 + cmpi 0, r13, 2 + bne fm01 + addi r3, 0, 1 + bl fmfound + +fm01: cmpi 0, r10, 11 + bne fm02 + cmpi 0, r11, 10 + bne fm02 + cmpi 0, r13, 2 + bne fm02 + addi r3, 0, 1 + bl fmfound + +fm02: cmpi 0, r10, 12 + bne fm03 + cmpi 0, r11, 9 + bne fm03 + cmpi 0, r13, 4 + bne fm03 + addi r3, 0, 2 + bl fmfound + +fm03: cmpi 0, r10, 12 + bne fm04 + cmpi 0, r11, 10 + bne fm04 + cmpi 0, r13, 4 + bne fm04 + addi r3, 0, 2 + bl fmfound + +fm04: cmpi 0, r10, 13 + bne fm05 + cmpi 0, r11, 9 + bne fm05 + cmpi 0, r13, 4 + bne fm05 + addi r3, 0, 3 + bl fmfound + +fm05: cmpi 0, r10, 13 + bne fm06 + cmpi 0, r11, 10 + bne fm06 + cmpi 0, r13, 4 + bne fm06 + addi r3, 0, 3 + bl fmfound + +fm06: cmpi 0, r10, 13 + bne fm07 + cmpi 0, r11, 11 + bne fm07 + cmpi 0, r13, 4 + bne fm07 + addi r3, 0, 3 + bl fmfound + +fm07: cmpi 0, r10, 12 + bne fm08 + cmpi 0, r11, 8 + bne fm08 + cmpi 0, r13, 2 + bne fm08 + addi r3, 0, 4 + bl fmfound + +fm08: cmpi 0, r10, 12 + bne fm09 + cmpi 0, r11, 8 + bne fm09 + cmpi 0, r13, 4 + bne fm09 + addi r3, 0, 4 + bl fmfound + +fm09: cmpi 0, r10, 11 + bne fm10 + cmpi 0, r11, 8 + bne fm10 + cmpi 0, r13, 2 + bne fm10 + addi r3, 0, 5 + bl fmfound + +fm10: cmpi 0, r10, 11 + bne fm11 + cmpi 0, r11, 8 + bne fm11 + cmpi 0, r13, 4 + bne fm11 + addi r3, 0, 5 + bl fmfound + +fm11: cmpi 0, r10, 13 + bne fm12 + cmpi 0, r11, 8 + bne fm12 + cmpi 0, r13, 2 + bne fm12 + addi r3, 0, 6 + bl fmfound + +fm12: cmpi 0, r10, 13 + bne fm13 + cmpi 0, r11, 8 + bne fm13 + cmpi 0, r13, 4 + bne fm13 + addi r3, 0, 6 + bl fmfound + +fm13: cmpi 0, r10, 13 + bne fm14 + cmpi 0, r11, 9 + bne fm14 + cmpi 0, r13, 2 + bne fm14 + addi r3, 0, 7 + bl fmfound + +fm14: cmpi 0, r10, 13 + bne fm15 + cmpi 0, r11, 10 + bne fm15 + cmpi 0, r13, 2 + bne fm15 + addi r3, 0, 7 + bl fmfound + +fm15: + /* not found, error code to be issued on LEDs */ + addi r7, 0, LED_SDRAM_CODE_2 + addis r6, 0, 0x1000 + ori r6, r6, 0x0001 + stb r7,0(r6) + eieio +fmerr: bl fmerr + +fmfound:addi r6, 0, 1 + subf r3, r6, r3 + + mtlr r5 /* restore lr */ + blr + +/*--------------------------------------------------------------------- */ +/* Function: find_size_code */ +/* Description: Determines size code to be used in configuring SDRAM controller */ +/* dependent on density (r15 = byte 31 from SPD) */ +/*--------------------------------------------------------------------- */ +find_size_code: + + mflr r5 + + addi r3, r15, 0 /* density */ + addi r7, 0, 0 +fs01: andi. r6, r3, 0x01 + cmpi 0, r6, 1 + beq fs04 + + addi r7, r7, 1 + cmpi 0, r7, 7 + bge fs02 + addi r9, 0, 1 + srw r3, r3, r9 + bl fs01 + + /* not found, error code to be issued on LEDs */ +fs02: addi r4, 0, LED_SDRAM_CODE_3 + addis r8, 0, 0x1000 + ori r8, r8, 0x0001 + stb r4,0(r8) + eieio +fs03: bl fs03 + +fs04: addi r3, r7, 0 + cmpi 0, r3, 0 + beq fs05 + addi r6, 0, 1 + subf r3, r6, r3 +fs05: + mtlr r5 /* restore lr */ + blr + +/*--------------------------------------------------------------------- */ +/* Function: find_casl */ +/* Description: Determines CAS latency */ +/*--------------------------------------------------------------------- */ +find_casl: + + mflr r5 + + andi. r14, r14, 0x7f /* r14 holds supported CAS latencies */ + addi r3, 0, 0xff /* preset determined CASL */ + addi r4, 0, 6 /* Start at bit 6 of supported CAS latencies */ + addi r2, 0, 0 /* Start finding highest CAS latency */ + +fc01: srw r6, r14, r4 /* */ + andi. r6, r6, 0x01 /* */ + cmpi 0, r6, 1 /* Check bit for current latency */ + bne fc06 /* If not supported, go to next */ + + cmpi 0, r2, 2 /* Check if third-highest latency */ + bge fc04 /* If so, go calculate with another format */ + + cmpi 0, r2, 0 /* Check if highest latency */ + bgt fc02 /* */ + addi r7, r19, 0 /* SDRAM cycle time for highest CAS latenty */ + + bl fc03 +fc02: + addi r7, r20, 0 /* SDRAM cycle time for next-highest CAS latenty */ +fc03: + addi r8, r7, 0 + addi r9, 0, 4 + srw r7, r7, r9 + andi. r7, r7, 0x0f + mulli r7, r7, 100 + andi. r8, r8, 0x0f + mulli r8, r8, 10 + add r7, r7, r8 + cmp 0, r7, r30 + bgt fc05 + addi r3, r2, 0 + bl fc05 +fc04: + addi r7, r21, 0 /* SDRAM cycle time for third-highest CAS latenty */ + addi r8, r7, 0 + addi r9, 0, 2 + srw r7, r7, r9 + andi. r7, r7, 0x3f + mulli r7, r7, 100 + andi. r8, r8, 0x03 + mulli r8, r8, 25 + add r7, r7, r8 + + cmp 0, r7, r30 + bgt fc05 + addi r3, r2, 0 + +fc05: addi r2, r2, 1 /* next latency */ + cmpi 0, r2, 3 + bge fc07 +fc06: addi r6, 0, 1 + subf r4, r6, r4 + cmpi 0, r4, 0 + bne fc01 + +fc07: + + mtlr r5 /* restore lr */ + blr +#endif + + +/* Peripheral Bank 1 Access Parameters */ +/* 0 BME = 1 ; burstmode enabled */ +/* " 1:8" TWT=00110110 ;Transfer wait (details below) */ +/* 1:5 FWT=00110 ; first wait = 6 cycles */ +/* 6:8 BWT=110 ; burst wait = 6 cycles */ +/* 9:11 000 ; reserved */ +/* 12:13 CSN=00 ; chip select on timing = 0 */ +/* 14:15 OEN=01 ; output enable */ +/* 16:17 WBN=01 ; write byte enable on timing 1 cycle */ +/* 18:19 WBF=01 ; write byte enable off timing 1 cycle */ +/* 20:22 TH=010 ; transfer hold = 2 cycles */ +/* 23 RE=0 ; ready enable = disabled */ +/* 24 SOR=1 ; sample on ready = same PerClk */ +/* 25 BEM=0 ; byte enable mode = only for write cycles */ +/* 26 PEN=0 ; parity enable = disable */ +/* 27:31 00000 ;reserved */ +/* */ +/* 1 + 00110 + 110 + 000 + 00 + 01 + 01 + 01 + 010 + 0 + 1 + 0 + 0 + 00000 = 0x9b015480 */ +/* */ +/* */ +/* Code for BDI probe: */ +/* */ +/* WDCR 18 0x00000011 ;Select PB1AP */ +/* WDCR 19 0x1b015480 ;PB1AP: Flash */ +/* */ +/* Peripheral Bank 0 Access Parameters */ +/* 0:11 BAS=0x200 ; base address select = 0x200 * 0x100000 (1MB) = */ +/* 12:14 BS=100 ; bank size = 16MB (100) / 32MB (101) */ +/* 15:16 BU=11 ; bank usage = read/write */ +/* 17:18 BW=00 ; bus width = 8-bit */ +/* 19:31 ; reserved */ +/* */ +/* 0x200 + 100 + 11 + 00 + 0 0000 0000 0000 = 0x20098000 */ +/* WDCR 18 0x00000001 ;Select PB1CR */ +/* WDCR 19 0x20098000 ;PB1CR: 1MB at 0x00100000, r/w, 8bit */ + +/* For CPLD */ +/* 0 + 00000 + 010 + 000 + 00 + 01 + 00 + 00 + 000 + 0 + 0 + 1 + 0 + 00000 */ +/* WDCR_EBC(pb5ap, 0x01010040) */ +/*jsa recommendation: WDCR_EBC(pb5ap, 0x00010040) */ +/* WDCR_EBC(pb5cr, 0X10018000) */ +/* Access parms */ +/* 100 3 8 0 0 0 */ +/* 0x100 + 001 + 11 + 00 + 0 0000 0000 0000 = 0x10038000 */ +/* Address : 0x10000000 */ +/* Size: 2 MB */ +/* Usage: read/write */ +/* Width: 32 bit */ + +/* For Genie onboard fpga 32 bit interface */ +/* 0 1 0 1 0 0 0 0 */ +/* 0 + 00000 + 010 + 000 + 00 + 01 + 00 + 00 + 000 + 0 + 0 + 0 + 0 + 00000 */ +/* 0x01010000 */ +/* Access parms */ +/* 102 1 c 0 0 0 */ +/* 0x102 + 000 + 11 + 10 + 0 0000 0000 0000 = 0x1021c000 */ +/* Address : 0x10200000 */ +/* Size: 2 MB */ +/* Usage: read/write */ +/* Width: 32 bit */ + +/* Walnut fpga pb7ap */ +/* 0 1 8 1 5 2 8 0 */ +/* 0 + 00000 + 011 + 000 + 00 + 01 + 01 + 01 + 001 + 0 + 1 + 0 + 0 + 00000 */ +/* Walnut fpga pb7cr */ +/* 0xF0318000 */ +/* */ |