diff options
Diffstat (limited to 'board/evb4510/lowlevel_init.S')
| -rwxr-xr-x | board/evb4510/lowlevel_init.S | 157 |
1 files changed, 157 insertions, 0 deletions
diff --git a/board/evb4510/lowlevel_init.S b/board/evb4510/lowlevel_init.S new file mode 100755 index 0000000..7184d72 --- /dev/null +++ b/board/evb4510/lowlevel_init.S @@ -0,0 +1,157 @@ +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <config.h> +#include <version.h> +#include <asm/hardware.h> + +/*********************************************************************** + * Configure Memory Map + * + * This memory map allows us to relocate from FLASH to SRAM. After + * power-on reset the CPU only knows about the FLASH memory at address + * 0x00000000. After lowlevel_init completes the memory map will be: + * + * Memory Addr + * 0x00000000 + * to 8MB SRAM (U5) -- 8MB Map + * 0x00800000 + * + * 0x01000000 + * to 2MB Flash @ 0x00000000 (U7) -- 2MB Map + * 0x01200000 + * + * 0x02000000 + * to 512KB Flash @ 0x02000000 (U9) -- 2MB Map + * 0x02080000 + * + * Load all 12 memory registers with the STMIA instruction since + * memory access is disabled once these registers are written. The + * last register written re-enables memory access. For more info see + * the user's manual for the S3C4510B, available from Samsung's web + * site. Search for part number "S3C4510B". + * + ***********************************************************************/ + +.globl lowlevel_init +lowlevel_init: + + /* preserve the temp register (r12 AKA ip) and remap it. */ + ldr r1, =SRAM_BASE+0xC + add r0, r12, #0x01000000 + str r0, [r1] + + /* remap the link register for when we return */ + add lr, lr, #0x01000000 + + /* store a short program in the on chip SRAM, which is + * unaffected when remapping memory. Note the cache must be + * disabled for the on chip SRAM to be available. + */ + ldr r1, =SRAM_BASE + ldr r0, =0xe8801ffe /* stmia r0, {r1-r12} */ + str r0, [r1] + add r1, r1, #4 + ldr r0, =0xe59fc000 /* ldr r12, [pc, #0] */ + str r0, [r1] + add r1, r1, #4 + ldr r0, =0xe1a0f00e /* mov pc, lr */ + str r0, [r1] + + adr r0, memory_map_data + ldmia r0, {r1-r12} + ldr r0, =REG_EXTDBWTH + + ldr pc, =SRAM_BASE + +.globl reset_cpu +reset_cpu: + /* + * reset the cpu by re-mapping FLASH 0 to 0x0 and jumping to + * address 0x0. We accomplish this by storing a few + * instructions into the on chip SRAM (8KB) and run from + * there. Note the cache must be disabled for the on chip + * SRAM to be available. + * + * load r2 with REG_ROMCON0 + * load r3 with 0x12040060 configure FLASH bank 0 @ 0x00000000 + * load r4 with REG_DRAMCON0 + * load r5 with 0x08000380 configure RAM bank 0 @ 0x01000000 + * load r6 with REG_REFEXTCON + * load r7 with 0x9c218360 + * load r8 with 0x0 + * store str r3,[r2] @ SRAM_BASE + * store str r5,[r4] @ SRAM_BASE + 0x4 + * store str r7,[r6] @ SRAM_BASE + 0x8 + * store mov pc,r8 @ SRAM_BASE + 0xC + * mov pc, SRAM_BASE + * + */ + + /* disable cache */ + ldr r0, =REG_SYSCFG + ldr r1, =0x83ffffa0 /* cache-disabled */ + str r1, [r0] + + ldr r2, =REG_ROMCON0 + ldr r3, =0x02000060 /* Bank0 2MB FLASH @ 0x00000000 */ + ldr r4, =REG_DRAMCON0 + ldr r5, =0x18040380 /* DRAM0 8MB SRAM @ 0x01000000 */ + ldr r6, =REG_REFEXTCON + ldr r7, =0xce278360 + ldr r8, =0x00000000 + ldr r1, =SRAM_BASE + ldr r0, =0xe5823000 /* str r3, [r2] */ + str r0, [r1] + ldr r1, =SRAM_BASE+4 + ldr r0, =0xe5845000 /* str r5, [r4] */ + str r0, [r1] + ldr r1, =SRAM_BASE+8 + ldr r0, =0xe5867000 /* str r7, [r6] */ + str r0, [r1] + ldr r1, =SRAM_BASE+0xC + ldr r0, =0xe1a0f008 /* mov pc, r8 */ + str r0, [r1] + ldr r1, =SRAM_BASE + mov pc, r1 + + /* never return */ + +/************************************************************************ + * Below are twelve 32-bit values for the twelve memory registers of + * the system manager, starting with register REG_EXTDBWTH. + ***********************************************************************/ +memory_map_data: + .long 0x00f03005 /* memory widths */ + .long 0x12040060 /* Bank0 2MB FLASH @ 0x01000000 */ + .long 0x22080060 /* Bank1 512KB FLASH @ 0x02000000 */ + .long 0x00000000 + .long 0x00000000 + .long 0x00000000 + .long 0x00000000 + .long 0x08000380 /* DRAM0 8MB SRAM @ 0x00000000 */ + .long 0x00000000 + .long 0x00000000 + .long 0x00000000 + .long 0x9c218360 /* enable memory */ |