init commit via android 4.4 uboot

1 files changed, 304 insertions, 0 deletions

diff --git a/include/configs/PN62.h b/include/configs/PN62.h
new file mode 100755
index 0000000..a717659
--- /dev/null
+++ b/include/configs/PN62.h
@@ -0,0 +1,304 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X		1
+#define CONFIG_MPC8240		1
+#define CONFIG_PN62		1
+
+#define CONFIG_CONS_INDEX	1
+
+
+#define REMOVE_COMMANDS         ( CFG_CMD_AUTOSCRIPT	| \
+ 				  CFG_CMD_LOADS		| \
+ 				  CFG_CMD_ENV		| \
+ 				  CFG_CMD_FLASH		| \
+				  CFG_CMD_IMLS		)
+
+#define CONFIG_COMMANDS		( (CONFIG_CMD_DFL & ~REMOVE_COMMANDS) |\
+				  CFG_CMD_PCI |\
+				  CFG_CMD_BSP)
+
+#define CONFIG_BAUDRATE		19200	/* console baudrate		*/
+
+#define CONFIG_BOOTDELAY	1	/* autoboot after n seconds	*/
+
+#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
+
+#define CONFIG_SERVERIP		10.0.0.201
+#define CONFIG_IPADDR 		10.0.0.200
+#define CONFIG_ROOTPATH		/opt/eldk/ppc_82xx
+#define CONFIG_NETMASK		255.255.255.0
+#undef CONFIG_BOOTARGS
+#if 0
+/* Boot Linux with NFS root filesystem */
+#define CONFIG_BOOTCOMMAND \
+			"setenv verify y;" \
+       			"setenv bootargs console=ttyS0,19200 mem=31M quiet " \
+			"root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
+			"ip=${ipaddr}:${serverip}::${netmask}:pn62:eth0:off;" \
+			"loadp 100000; bootm"
+			/* "tftpboot 100000 uImage; bootm" */
+#else
+/* Boot Linux with RAMdisk based filesystem (initrd, BusyBox) */
+#define CONFIG_BOOTCOMMAND \
+			"setenv verify n;" \
+       			"setenv bootargs console=ttyS0,19200 mem=31M quiet " \
+			"root=/dev/ram rw " \
+			"ip=${ipaddr}:${serverip}::${netmask}:pn62:eth0:off;" \
+			"loadp 200000; bootm"
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any)	*/
+#include <cmd_confdefs.h>
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		1		/* undef to save memory		*/
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_LOAD_ADDR		0x00100000	/* default load address		*/
+#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+
+#define CONFIG_PRAM		1024		/* reserve 1 MB protected RAM	*/
+
+#define CONFIG_MISC_INIT_R	1		/* call misc_init_r() on init	*/
+
+#define CONFIG_HAS_ETH1		1		/* add support for eth1addr	*/
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1		/* Show boot progress on LEDs   */
+
+/*
+ * PCI stuff
+ */
+#define CONFIG_PCI				/* include pci support		*/
+#define CONFIG_PCI_PNP				/* we need Plug 'n Play		*/
+#if 0
+#define CONFIG_PCI_SCAN_SHOW			/* show PCI auto-scan at boot	*/
+#endif
+
+/*
+ * Networking stuff
+ */
+#define CONFIG_NET_MULTI       			/* Multi ethernet cards support */
+
+#define CONFIG_PCNET				/* there are 2 AMD PCnet 79C973	*/
+#define CONFIG_PCNET_79C973
+
+#define _IO_BASE		0xfe000000	/* points to PCI I/O space	*/
+
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_MAX_RAM_SIZE	0x10000000
+
+#define CFG_RESET_ADDRESS	0xfff00100
+
+#undef	CFG_RAMBOOT
+#define CFG_MONITOR_LEN		0x00030000
+#define CFG_MONITOR_BASE	TEXT_BASE
+
+/*#define CFG_GBL_DATA_SIZE    256*/
+#define CFG_GBL_DATA_SIZE	128
+
+#define CFG_INIT_RAM_ADDR   	0x40000000
+#define CFG_INIT_RAM_END    	0x1000
+#define CFG_GBL_DATA_OFFSET 	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+
+#define CFG_NO_FLASH		1		/* There is no FLASH memory	*/
+
+#define CFG_ENV_IS_NOWHERE	1		/* Store ENV in memory only	*/
+#define CFG_ENV_OFFSET		0x00004000	/* Offset of Environment Sector */
+#define CFG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
+
+#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
+
+#define CFG_MEMTEST_START	0x00004000	/* memtest works on		*/
+#define CFG_MEMTEST_END		0x01f00000	/* 0 ... 32 MB in DRAM		*/
+
+/*
+ * Serial port configuration
+ */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE	1
+
+#define CFG_NS16550_CLK		1843200
+
+#define CFG_NS16550_COM1	0xff800008
+#define CFG_NS16550_COM2	0xff800000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CONFIG_SYS_CLK_FREQ  33333333	/* external frequency to pll */
+#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  3
+
+#define CFG_EUMB_ADDR		0xFCE00000
+
+/* MCCR1 */
+#define CFG_ROMNAL		3	/* rom/flash next access time		*/
+#define CFG_ROMFAL		7	/* rom/flash access time		*/
+
+/* MCCR2 */
+#define CFG_ASRISE		6	/* ASRISE in clocks			*/
+#define CFG_ASFALL		12	/* ASFALL in clocks			*/
+#define CFG_REFINT		5600	/* REFINT in clocks			*/
+
+/* MCCR3 */
+#define CFG_BSTOPRE		0x3cf	/* Burst To Precharge			*/
+#define CFG_REFREC		2	/* Refresh to activate interval		*/
+#define CFG_RDLAT		3	/* data latency from read command	*/
+
+/* MCCR4 */
+#define CFG_PRETOACT		1	/* Precharge to activate interval	*/
+#define CFG_ACTTOPRE		3	/* Activate to Precharge interval	*/
+#define CFG_ACTORW		2	/* Activate to R/W			*/
+#define CFG_SDMODE_CAS_LAT	2	/* SDMODE CAS latency			*/
+#define CFG_SDMODE_WRAP		0	/* SDMODE Wrap type			*/
+#define CFG_SDMODE_BURSTLEN	2	/* SDMODE Burst length 2=4, 3=8		*/
+#define CFG_REGISTERD_TYPE_BUFFER   1
+
+/* Memory bank settings:
+ *
+ * only bits 20-29 are actually used from these vales to set the
+ * start/qend address the upper two bits will be 0, and the lower 20
+ * bits will be set to 0x00000 for a start address, or 0xfffff for an
+ * end address
+ */
+#define CFG_BANK0_START		0x00000000
+#define CFG_BANK0_END		(CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE	1
+#define CFG_BANK1_START		0x00000000
+#define CFG_BANK1_END		0x00000000
+#define CFG_BANK1_ENABLE	0
+#define CFG_BANK2_START		0x00000000
+#define CFG_BANK2_END		0x00000000
+#define CFG_BANK2_ENABLE	0
+#define CFG_BANK3_START		0x00000000
+#define CFG_BANK3_END		0x00000000
+#define CFG_BANK3_ENABLE	0
+#define CFG_BANK4_START		0x00000000
+#define CFG_BANK4_END		0x00000000
+#define CFG_BANK4_ENABLE	0
+#define CFG_BANK5_START		0x00000000
+#define CFG_BANK5_END		0x00000000
+#define CFG_BANK5_ENABLE	0
+#define CFG_BANK6_START		0x00000000
+#define CFG_BANK6_END		0x00000000
+#define CFG_BANK6_ENABLE	0
+#define CFG_BANK7_START		0x00000000
+#define CFG_BANK7_END		0x00000000
+#define CFG_BANK7_ENABLE	0
+
+/*
+ * Memory bank enable bitmask, specifying which of the banks defined above
+ * are actually present. MSB is for bank #7, LSB is for bank #0.
+ */
+#define CFG_BANK_ENABLE		0x01
+
+#define CFG_ODCR		0xff	/* configures line driver impedances,	*/
+					/* see 8240 book for bit definitions	*/
+#define CFG_PGMAX		0x32	/* how long the 8240 retains the	*/
+					/* currently accessed page in memory	*/
+					/* see 8240 book for details		*/
+
+/* SDRAM 0 - 256MB */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT1L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+/* PCI memory space */
+#define CFG_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* Config addrs, etc */
+#define CFG_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+#define CFG_DBAT3L	CFG_IBAT3L
+#define CFG_DBAT3U	CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
+
+
+#endif	/* __CONFIG_H */