diff options
author | Kevin | 2014-11-15 11:48:36 +0800 |
---|---|---|
committer | Kevin | 2014-11-15 11:48:36 +0800 |
commit | d04075478d378d9e15f3e1abfd14b0bd124077d4 (patch) | |
tree | 733dd964582f388b9e3e367c249946cd32a2851f /dtt | |
download | FOSSEE-netbook-uboot-source-d04075478d378d9e15f3e1abfd14b0bd124077d4.tar.gz FOSSEE-netbook-uboot-source-d04075478d378d9e15f3e1abfd14b0bd124077d4.tar.bz2 FOSSEE-netbook-uboot-source-d04075478d378d9e15f3e1abfd14b0bd124077d4.zip |
init commit via android 4.4 uboot
Diffstat (limited to 'dtt')
-rwxr-xr-x | dtt/Makefile | 44 | ||||
-rwxr-xr-x | dtt/adm1021.c | 171 | ||||
-rwxr-xr-x | dtt/ds1621.c | 190 | ||||
-rwxr-xr-x | dtt/lm75.c | 180 |
4 files changed, 585 insertions, 0 deletions
diff --git a/dtt/Makefile b/dtt/Makefile new file mode 100755 index 0000000..0a33478 --- /dev/null +++ b/dtt/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2001 +# Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +#CFLAGS += -DDEBUG + +LIB = libdtt.a + +OBJS = lm75.o ds1621.o adm1021.o + +all: $(LIB) + +$(LIB): $(START) $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/dtt/adm1021.c b/dtt/adm1021.c new file mode 100755 index 0000000..14c38f0 --- /dev/null +++ b/dtt/adm1021.c @@ -0,0 +1,171 @@ +/* + * (C) Copyright 2003 + * Murray Jensen, CSIRO-MIT, Murray.Jensen@csiro.au + * + * based on dtt/lm75.c which is ... + * + * (C) Copyright 2001 + * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Analog Devices's ADM1021 + * "Low Cost Microprocessor System Temperature Monitor" + */ + +#include <common.h> + +#ifdef CONFIG_DTT_ADM1021 + +#include <i2c.h> +#include <dtt.h> + +typedef + struct { + uint i2c_addr:7; /* 7bit i2c chip address */ + uint conv_rate:3; /* conversion rate */ + uint enable_alert:1; /* enable alert output pin */ + uint enable_local:1; /* enable internal temp sensor */ + uint max_local:8; /* internal temp maximum */ + uint min_local:8; /* internal temp minimum */ + uint enable_remote:1; /* enable remote temp sensor */ + uint max_remote:8; /* remote temp maximum */ + uint min_remote:8; /* remote temp minimum */ + } +dtt_cfg_t; + +dtt_cfg_t dttcfg[] = CFG_DTT_ADM1021; + +int +dtt_read (int sensor, int reg) +{ + dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; + uchar data; + + if (i2c_read(dcp->i2c_addr, reg, 1, &data, 1) != 0) + return -1; + + return (int)data; +} /* dtt_read() */ + +int +dtt_write (int sensor, int reg, int val) +{ + dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; + uchar data; + + data = (uchar)(val & 0xff); + + if (i2c_write(dcp->i2c_addr, reg, 1, &data, 1) != 0) + return 1; + + return 0; +} /* dtt_write() */ + +static int +_dtt_init (int sensor) +{ + dtt_cfg_t *dcp = &dttcfg[sensor >> 1]; + int reg, val; + + if (((sensor & 1) == 0 ? dcp->enable_local : dcp->enable_remote) == 0) + return 1; /* sensor is disabled (or rather ignored) */ + + /* + * Setup High Limit register + */ + if ((sensor & 1) == 0) { + reg = DTT_WRITE_LOC_HIGHLIM; + val = dcp->max_local; + } + else { + reg = DTT_WRITE_REM_HIGHLIM; + val = dcp->max_remote; + } + if (dtt_write (sensor, reg, val) != 0) + return 1; + + /* + * Setup Low Limit register + */ + if ((sensor & 1) == 0) { + reg = DTT_WRITE_LOC_LOWLIM; + val = dcp->min_local; + } + else { + reg = DTT_WRITE_REM_LOWLIM; + val = dcp->min_remote; + } + if (dtt_write (sensor, reg, val) != 0) + return 1; + + /* shouldn't hurt if the rest gets done twice */ + + /* + * Setup Conversion Rate register + */ + if (dtt_write (sensor, DTT_WRITE_CONVRATE, dcp->conv_rate) != 0) + return 1; + + /* + * Setup configuraton register + */ + val = 0; /* running */ + if (dcp->enable_alert == 0) + val |= DTT_CONFIG_ALERT_MASKED; /* mask ALERT pin */ + if (dtt_write (sensor, DTT_WRITE_CONFIG, val) != 0) + return 1; + + return 0; +} /* _dtt_init() */ + +int +dtt_init (void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + const char *const header = "DTT: "; + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf ("%s%d FAILED INIT\n", header, i+1); + else + printf ("%s%d is %i C\n", header, i+1, + dtt_get_temp(sensors[i])); + } + + return (0); +} /* dtt_init() */ + +int +dtt_get_temp (int sensor) +{ + signed char val; + + if ((sensor & 1) == 0) + val = dtt_read(sensor, DTT_READ_LOC_VALUE); + else + val = dtt_read(sensor, DTT_READ_REM_VALUE); + + return (int) val; +} /* dtt_get_temp() */ + +#endif /* CONFIG_DTT_ADM1021 */ diff --git a/dtt/ds1621.c b/dtt/ds1621.c new file mode 100755 index 0000000..4948181 --- /dev/null +++ b/dtt/ds1621.c @@ -0,0 +1,190 @@ +/* + * (C) Copyright 2001 + * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Dallas Semiconductor's DS1621 Digital Thermometer and Thermostat. + */ + +#include <common.h> + +#ifdef CONFIG_DTT_DS1621 +#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ + (CFG_EEPROM_PAGE_WRITE_BITS < 1) +# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_DS1621" +#endif +#include <i2c.h> +#include <dtt.h> + +/* + * Device code + */ +#define DTT_I2C_DEV_CODE 0x48 /* Dallas Semi's DS1621 */ + +int dtt_read(int sensor, int reg) +{ + int dlen; + uchar data[2]; + + /* + * Calculate sensor address and command. + * + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* Calculate addr of ds1621*/ + + /* + * Prepare to handle 2 byte result. + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_HIGH) || (reg == DTT_TEMP_LOW)) + dlen = 2; + else + dlen = 1; + + /* + * Now try to read the register. + */ + if (i2c_read(sensor, reg, 1, data, dlen) != 0) + return 1; + + /* + * Handle 2 byte result. + */ + if (dlen == 2) + return ((int)((short)data[1] + (((short)data[0]) << 8))); + + return (int)data[0]; +} /* dtt_read() */ + + +int dtt_write(int sensor, int reg, int val) +{ + int dlen; + uchar data[2]; + + /* + * Calculate sensor address and register. + * + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); + + /* + * Handle various data sizes. + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_HIGH) || (reg == DTT_TEMP_LOW)) { + dlen = 2; + data[0] = (char)((val >> 8) & 0xff); /* MSB first */ + data[1] = (char)(val & 0xff); + } + else if ((reg == DTT_WRITE_START_CONV) || (reg == DTT_WRITE_STOP_CONV)) { + dlen = 0; + data[0] = (char)0; + data[1] = (char)0; + } + else { + dlen = 1; + data[0] = (char)(val & 0xff); + } + + /* + * Write value to device. + */ + if (i2c_write(sensor, reg, 1, data, dlen) != 0) + return 1; + + return 0; +} /* dtt_write() */ + + +static int _dtt_init(int sensor) +{ + int val; + + /* + * Setup High Temp. + */ + val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; + if (dtt_write(sensor, DTT_TEMP_HIGH, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + /* + * Setup Low Temp - hysteresis. + */ + val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80; + if (dtt_write(sensor, DTT_TEMP_LOW, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + /* + * Setup configuraton register + * + * Clear THF & TLF, Reserved = 1, Polarity = Active Low, One Shot = YES + * + * We run in polled mode, since there isn't any way to know if this + * lousy device is ready to provide temperature readings on power up. + */ + val = 0x9; + if (dtt_write(sensor, DTT_CONFIG, val) != 0) + return 1; + udelay(50000); /* Max 50ms */ + + return 0; +} /* _dtt_init() */ + + +int dtt_init (void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf("DTT%d: FAILED\n", i+1); + else + printf("DTT%d: %i C\n", i+1, dtt_get_temp(sensors[i])); + } + + return (0); +} /* dtt_init() */ + + +int dtt_get_temp(int sensor) +{ + int i; + + /* + * Start a conversion, may take up to 1 second. + */ + dtt_write(sensor, DTT_WRITE_START_CONV, 0); + for (i = 0; i <= 10; i++) { + udelay(100000); + if (dtt_read(sensor, DTT_CONFIG) & 0x80) + break; + } + + return (dtt_read(sensor, DTT_READ_TEMP) / 256); +} /* dtt_get_temp() */ + + +#endif /* CONFIG_DTT_DS1621 */ diff --git a/dtt/lm75.c b/dtt/lm75.c new file mode 100755 index 0000000..59daa45 --- /dev/null +++ b/dtt/lm75.c @@ -0,0 +1,180 @@ +/* + * (C) Copyright 2001 + * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * On Semiconductor's LM75 Temperature Sensor + */ + +#include <common.h> + +#ifdef CONFIG_DTT_LM75 +#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ + (CFG_EEPROM_PAGE_WRITE_BITS < 1) +# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM75" +#endif + +#include <i2c.h> +#include <dtt.h> + + +/* + * Device code + */ +#define DTT_I2C_DEV_CODE 0x48 /* ON Semi's LM75 device */ + +int dtt_read(int sensor, int reg) +{ + int dlen; + uchar data[2]; + + /* + * Validate 'reg' param + */ + if((reg < 0) || (reg > 3)) + return -1; + + /* + * Calculate sensor address and register. + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* calculate address of lm75 */ + + /* + * Prepare to handle 2 byte result. + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_HYST) || + (reg == DTT_TEMP_SET)) + dlen = 2; + else + dlen = 1; + + /* + * Now try to read the register. + */ + if (i2c_read(sensor, reg, 1, data, dlen) != 0) + return -1; + + /* + * Handle 2 byte result. + */ + if (dlen == 2) + return ((int)((short)data[1] + (((short)data[0]) << 8))); + + + return (int)data[0]; +} /* dtt_read() */ + + +int dtt_write(int sensor, int reg, int val) +{ + int dlen; + uchar data[2]; + + /* + * Validate 'reg' param + */ + if ((reg < 0) || (reg > 3)) + return 1; + + /* + * Calculate sensor address and register. + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* calculate address of lm75 */ + + /* + * Handle 2 byte values. + */ + if ((reg == DTT_READ_TEMP) || + (reg == DTT_TEMP_HYST) || + (reg == DTT_TEMP_SET)) { + dlen = 2; + data[0] = (char)((val >> 8) & 0xff); /* MSB first */ + data[1] = (char)(val & 0xff); + } else { + dlen = 1; + data[0] = (char)(val & 0xff); + } + + /* + * Write value to register. + */ + if (i2c_write(sensor, reg, 1, data, dlen) != 0) + return 1; + + return 0; +} /* dtt_write() */ + + +static int _dtt_init(int sensor) +{ + int val; + + /* + * Setup TSET ( trip point ) register + */ + val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; /* trip */ + if (dtt_write(sensor, DTT_TEMP_SET, val) != 0) + return 1; + + /* + * Setup THYST ( untrip point ) register - Hysteresis + */ + val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80; + if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0) + return 1; + + /* + * Setup configuraton register + */ + /* config = 6 sample integration, int mode, active low, and enable */ + val = 0x18; + if (dtt_write(sensor, DTT_CONFIG, val) != 0) + return 1; + + return 0; +} /* _dtt_init() */ + + +int dtt_init (void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + const char *const header = "DTT: "; + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf("%s%d FAILED INIT\n", header, i+1); + else + printf("%s%d is %i C\n", header, i+1, + dtt_get_temp(sensors[i])); + } + + return (0); +} /* dtt_init() */ + +int dtt_get_temp(int sensor) +{ + return (dtt_read(sensor, DTT_READ_TEMP) / 256); +} /* dtt_get_temp() */ + +#endif /* CONFIG_DTT_LM75 */ |