init commit via android 4.4 uboot

1 files changed, 3310 insertions, 0 deletions

diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
new file mode 100755
index 0000000..62446d4
--- /dev/null
+++ b/common/cmd_pcmcia.c
@@ -0,0 +1,3310 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************
+ *
+ * Lots of code copied from:
+ *
+ * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series.
+ * (C) 1999-2000 Magnus Damm <damm@bitsmart.com>
+ *
+ * "The ExCA standard specifies that socket controllers should provide
+ * two IO and five memory windows per socket, which can be independently
+ * configured and positioned in the host address space and mapped to
+ * arbitrary segments of card address space. " - David A Hinds. 1999
+ *
+ * This controller does _not_ meet the ExCA standard.
+ *
+ * m8xx pcmcia controller brief info:
+ * + 8 windows (attrib, mem, i/o)
+ * + up to two slots (SLOT_A and SLOT_B)
+ * + inputpins, outputpins, event and mask registers.
+ * - no offset register. sigh.
+ *
+ * Because of the lacking offset register we must map the whole card.
+ * We assign each memory window PCMCIA_MEM_WIN_SIZE address space.
+ * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO
+ * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE.
+ * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE.
+ * They are maximum 64KByte each...
+ */
+
+/* #define DEBUG	1	*/
+
+/*
+ * PCMCIA support
+ */
+#include <common.h>
+#include <command.h>
+#include <config.h>
+#include <pcmcia.h>
+#if defined(CONFIG_8xx)
+#include <mpc8xx.h>
+#endif
+#if defined(CONFIG_LWMON)
+#include <i2c.h>
+#endif
+#ifdef CONFIG_PXA_PCMCIA
+#include <asm/arch/pxa-regs.h>
+#endif
+
+#include <asm/io.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || \
+    ((CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD))
+
+int pcmcia_on (void);
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int  pcmcia_off (void);
+#endif
+
+#ifdef CONFIG_I82365
+
+extern int i82365_init (void);
+extern void i82365_exit (void);
+
+#else /* ! CONFIG_I82365 */
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int  hardware_disable(int slot);
+#endif
+static int  hardware_enable (int slot);
+static int  voltage_set(int slot, int vcc, int vpp);
+
+#if (! defined(CONFIG_I82365)) && (! defined(CONFIG_PXA_PCMCIA))
+static u_int m8xx_get_graycode(u_int size);
+#endif	/* !CONFIG_I82365, !CONFIG_PXA_PCMCIA */
+#if 0
+static u_int m8xx_get_speed(u_int ns, u_int is_io);
+#endif
+
+/* -------------------------------------------------------------------- */
+
+#ifndef CONFIG_PXA_PCMCIA
+
+/* look up table for pgcrx registers */
+
+static u_int *pcmcia_pgcrx[2] = {
+	&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcra,
+	&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb,
+};
+#define PCMCIA_PGCRX(slot)	(*pcmcia_pgcrx[slot])
+
+#endif	/* CONFIG_PXA_PCMCIA */
+
+#endif /* CONFIG_I82365 */
+
+#if defined(CONFIG_IDE_8xx_PCCARD)  || defined(CONFIG_PXA_PCMCIA)
+static void print_funcid (int func);
+static void print_fixed  (volatile uchar *p);
+static int  identify     (volatile uchar *p);
+static int  check_ide_device (int slot);
+#endif	/* CONFIG_IDE_8xx_PCCARD, CONFIG_PXA_PCMCIA */
+
+const char *indent = "\t   ";
+
+/* -------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+
+int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int rcode = 0;
+
+	if (argc != 2) {
+		printf ("Usage: pinit {on | off}\n");
+		return 1;
+	}
+	if (strcmp(argv[1],"on") == 0) {
+	     	rcode = pcmcia_on ();
+	} else if (strcmp(argv[1],"off") == 0) {
+		rcode = pcmcia_off ();
+	} else {
+		printf ("Usage: pinit {on | off}\n");
+		return 1;
+	}
+
+	return rcode;
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+/* -------------------------------------------------------------------- */
+
+#ifdef CONFIG_I82365
+int pcmcia_on (void)
+{
+	u_int rc;
+
+	debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	rc = i82365_init();
+
+	if (rc == 0) {
+		rc = check_ide_device(0);
+	}
+
+	return (rc);
+}
+#else
+
+#ifndef CONFIG_PXA_PCMCIA
+
+#ifdef CONFIG_HMI10
+# define  HMI10_FRAM_TIMING	(PCMCIA_SHT(2) | PCMCIA_SST(2) | PCMCIA_SL(4))
+#endif
+#if defined(CONFIG_LWMON) || defined(CONFIG_NSCU)
+# define  CFG_PCMCIA_TIMING	(PCMCIA_SHT(9) | PCMCIA_SST(3) | PCMCIA_SL(12))
+#else
+# define  CFG_PCMCIA_TIMING	(PCMCIA_SHT(2) | PCMCIA_SST(4) | PCMCIA_SL(9))
+#endif
+
+int pcmcia_on (void)
+{
+	int i;
+	u_long reg, base;
+	pcmcia_win_t *win;
+	u_int slotbit;
+	u_int rc, slot;
+
+	debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	/* intialize the fixed memory windows */
+	win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
+	base = CFG_PCMCIA_MEM_ADDR;
+
+	if((reg = m8xx_get_graycode(CFG_PCMCIA_MEM_SIZE)) == -1) {
+		printf ("Cannot set window size to 0x%08x\n",
+			CFG_PCMCIA_MEM_SIZE);
+		return (1);
+	}
+
+	slotbit = PCMCIA_SLOT_x;
+	for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
+		win->br = base;
+
+#if (PCMCIA_SOCKETS_NO == 2)
+		if (i == 4) /* Another slot starting from win 4 */
+			slotbit = (slotbit ? PCMCIA_PSLOT_A : PCMCIA_PSLOT_B);
+#endif
+		switch (i) {
+#ifdef CONFIG_IDE_8xx_PCCARD
+		case 4:
+#ifdef CONFIG_HMI10
+		    {	/* map FRAM area */
+			win->or = (	PCMCIA_BSIZE_256K
+				|	PCMCIA_PPS_8
+				|	PCMCIA_PRS_ATTR
+				|	slotbit
+				|	PCMCIA_PV
+				|	HMI10_FRAM_TIMING );
+			break;
+		    }
+#endif
+		case 0:	{	/* map attribute memory */
+			win->or = (	PCMCIA_BSIZE_64M
+				|	PCMCIA_PPS_8
+				|	PCMCIA_PRS_ATTR
+				|	slotbit
+				|	PCMCIA_PV
+				|	CFG_PCMCIA_TIMING );
+			break;
+		    }
+		case 5:
+		case 1: {	/* map I/O window for data reg */
+			win->or = (	PCMCIA_BSIZE_1K
+				|	PCMCIA_PPS_16
+				|	PCMCIA_PRS_IO
+				|	slotbit
+				|	PCMCIA_PV
+				|	CFG_PCMCIA_TIMING );
+			break;
+		    }
+		case 6:
+		case 2: {	/* map I/O window for cmd/ctrl reg block */
+			win->or = (	PCMCIA_BSIZE_1K
+				|	PCMCIA_PPS_8
+				|	PCMCIA_PRS_IO
+				|	slotbit
+				|	PCMCIA_PV
+				|	CFG_PCMCIA_TIMING );
+			break;
+		    }
+#endif	/* CONFIG_IDE_8xx_PCCARD */
+#ifdef CONFIG_HMI10
+		case 3: {	/* map I/O window for 4xUART data/ctrl */
+			win->br += 0x40000;
+			win->or = (	PCMCIA_BSIZE_256K
+				|	PCMCIA_PPS_8
+				|	PCMCIA_PRS_IO
+				|	slotbit
+				|	PCMCIA_PV
+				|	CFG_PCMCIA_TIMING );
+			break;
+		    }
+#endif /* CONFIG_HMI10 */
+		default:	/* set to not valid */
+			win->or = 0;
+			break;
+		}
+
+		debug ("MemWin %d: PBR 0x%08lX  POR %08lX\n",
+			i, win->br, win->or);
+		base += CFG_PCMCIA_MEM_SIZE;
+		++win;
+	}
+
+	for (i=0, rc=0, slot=_slot_; i<PCMCIA_SOCKETS_NO; i++, slot = !slot) {
+		/* turn off voltage */
+		if ((rc = voltage_set(slot, 0, 0)))
+			continue;
+
+		/* Enable external hardware */
+		if ((rc = hardware_enable(slot)))
+			continue;
+
+#ifdef CONFIG_IDE_8xx_PCCARD
+		if ((rc = check_ide_device(i)))
+			continue;
+#endif
+	}
+	return (rc);
+}
+
+#endif /* CONFIG_PXA_PCMCIA */
+
+#endif /* CONFIG_I82365 */
+
+#ifdef CONFIG_PXA_PCMCIA
+
+static int hardware_enable (int slot)
+{
+	return 0;	/* No hardware to enable */
+}
+
+static int hardware_disable(int slot)
+{
+	return 0;	/* No hardware to disable */
+}
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	return 0;
+}
+
+void msWait(unsigned msVal)
+{
+	udelay(msVal*1000);
+}
+
+int pcmcia_on (void)
+{
+	unsigned int reg_arr[] = {
+		0x48000028, CFG_MCMEM0_VAL,
+		0x4800002c, CFG_MCMEM1_VAL,
+		0x48000030, CFG_MCATT0_VAL,
+		0x48000034, CFG_MCATT1_VAL,
+		0x48000038, CFG_MCIO0_VAL,
+		0x4800003c, CFG_MCIO1_VAL,
+
+		0, 0
+	};
+	int i, rc;
+
+#ifdef CONFIG_EXADRON1
+	int cardDetect;
+	volatile unsigned int *v_pBCRReg =
+		(volatile unsigned int *) 0x08000000;
+#endif
+
+	debug ("%s\n", __FUNCTION__);
+
+	i = 0;
+	while (reg_arr[i])
+		*((volatile unsigned int *) reg_arr[i++]) |= reg_arr[i++];
+	udelay (1000);
+
+	debug ("%s: programmed mem controller \n", __FUNCTION__);
+
+#ifdef CONFIG_EXADRON1
+
+/*define useful BCR masks */
+#define BCR_CF_INIT_VAL  		    0x00007230
+#define BCR_CF_PWRON_BUSOFF_RESETOFF_VAL    0x00007231
+#define BCR_CF_PWRON_BUSOFF_RESETON_VAL     0x00007233
+#define BCR_CF_PWRON_BUSON_RESETON_VAL      0x00007213
+#define BCR_CF_PWRON_BUSON_RESETOFF_VAL     0x00007211
+
+	/* we see from the GPIO bit if the card is present */
+	cardDetect = !(GPLR0 & GPIO_bit (14));
+
+	if (cardDetect) {
+		printf ("No PCMCIA card found!\n");
+	}
+
+	/* reset the card via the BCR line */
+	*v_pBCRReg = (unsigned) BCR_CF_INIT_VAL;
+	msWait (500);
+
+	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSOFF_RESETOFF_VAL;
+	msWait (500);
+
+	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSOFF_RESETON_VAL;
+	msWait (500);
+
+	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSON_RESETON_VAL;
+	msWait (500);
+
+	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSON_RESETOFF_VAL;
+	msWait (1500);
+
+	/* enable address bus */
+	GPCR1 = 0x01;
+	/* and the first CF slot */
+	MECR = 0x00000002;
+
+#endif /* EXADRON 1 */
+
+	rc = check_ide_device (0);	/* use just slot 0 */
+
+	return rc;
+}
+
+#endif /* CONFIG_PXA_PCMCIA */
+
+/* -------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+
+#ifdef CONFIG_I82365
+static int pcmcia_off (void)
+{
+	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	i82365_exit();
+
+	return 0;
+}
+#else
+
+#ifndef CONFIG_PXA_PCMCIA
+
+static int pcmcia_off (void)
+{
+	int i;
+	pcmcia_win_t *win;
+
+	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	/* clear interrupt state, and disable interrupts */
+	((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pscr =  PCMCIA_MASK(_slot_);
+	((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/* turn off interrupt and disable CxOE */
+	PCMCIA_PGCRX(_slot_) = __MY_PCMCIA_GCRX_CXOE;
+
+	/* turn off memory windows */
+	win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
+
+	for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
+		/* disable memory window */
+		win->or = 0;
+		++win;
+	}
+
+	/* turn off voltage */
+	voltage_set(_slot_, 0, 0);
+
+	/* disable external hardware */
+	printf ("Shutdown and Poweroff " PCMCIA_SLOT_MSG "\n");
+	hardware_disable(_slot_);
+	return 0;
+}
+
+#endif /* CONFIG_PXA_PCMCIA */
+
+#endif /* CONFIG_I82365 */
+
+#ifdef CONFIG_PXA_PCMCIA
+static int pcmcia_off (void)
+{
+	return 0;
+}
+#endif
+
+#endif	/* CFG_CMD_PCMCIA */
+
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_PXA_PCMCIA)
+
+#define	MAX_TUPEL_SZ	512
+#define MAX_FEATURES	4
+
+int ide_devices_found;
+static int check_ide_device (int slot)
+{
+	volatile uchar *ident = NULL;
+	volatile uchar *feature_p[MAX_FEATURES];
+	volatile uchar *p, *start, *addr;
+	int n_features = 0;
+	uchar func_id = ~0;
+	uchar code, len;
+	ushort config_base = 0;
+	int found = 0;
+	int i;
+
+	addr = (volatile uchar *)(CFG_PCMCIA_MEM_ADDR +
+				  CFG_PCMCIA_MEM_SIZE * (slot * 4));
+	debug ("PCMCIA MEM: %08lX\n", (ulong)addr);
+
+	start = p = (volatile uchar *) addr;
+
+	while ((p - start) < MAX_TUPEL_SZ) {
+
+		code = *p; p += 2;
+
+		if (code == 0xFF) { /* End of chain */
+			break;
+		}
+
+		len = *p; p += 2;
+#if defined(DEBUG) && (DEBUG > 1)
+		{ volatile uchar *q = p;
+			printf ("\nTuple code %02x  length %d\n\tData:",
+				code, len);
+
+			for (i = 0; i < len; ++i) {
+				printf (" %02x", *q);
+				q+= 2;
+			}
+		}
+#endif	/* DEBUG */
+		switch (code) {
+		case CISTPL_VERS_1:
+			ident = p + 4;
+			break;
+		case CISTPL_FUNCID:
+			/* Fix for broken SanDisk which may have 0x80 bit set */
+			func_id = *p & 0x7F;
+			break;
+		case CISTPL_FUNCE:
+			if (n_features < MAX_FEATURES)
+				feature_p[n_features++] = p;
+			break;
+		case CISTPL_CONFIG:
+			config_base = (*(p+6) << 8) + (*(p+4));
+			debug ("\n## Config_base = %04x ###\n", config_base);
+		default:
+			break;
+		}
+		p += 2 * len;
+	}
+
+	found = identify (ident);
+
+	if (func_id != ((uchar)~0)) {
+		print_funcid (func_id);
+
+		if (func_id == CISTPL_FUNCID_FIXED)
+			found = 1;
+		else
+			return (1);	/* no disk drive */
+	}
+
+	for (i=0; i<n_features; ++i) {
+		print_fixed (feature_p[i]);
+	}
+
+	if (!found) {
+		printf ("unknown card type\n");
+		return (1);
+	}
+
+	ide_devices_found |= (1 << slot);
+
+#if CONFIG_CPC45
+#else
+	/* set I/O area in config reg -> only valid for ARGOSY D5!!! */
+	*((uchar *)(addr + config_base)) = 1;
+#endif
+#if 0
+	printf("\n## Config_base = %04x ###\n", config_base);
+	printf("Configuration Option Register: %02x @ %x\n", readb(addr + config_base), addr + config_base);
+	printf("Card Configuration and Status Register: %02x\n", readb(addr + config_base + 2));
+	printf("Pin Replacement Register Register: %02x\n", readb(addr + config_base + 4));
+	printf("Socket and Copy Register: %02x\n", readb(addr + config_base + 6));
+#endif
+	return (0);
+}
+#endif	/* CONFIG_IDE_8xx_PCCARD */
+
+/* -------------------------------------------------------------------- */
+
+
+/* -------------------------------------------------------------------- */
+/* board specific stuff:						*/
+/* voltage_set(), hardware_enable() and hardware_disable()		*/
+/* -------------------------------------------------------------------- */
+
+/* -------------------------------------------------------------------- */
+/* RPX Boards from Embedded Planet					*/
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
+
+/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.
+ * SYPCR is write once only, therefore must the slowest memory be faster
+ * than the bus monitor or we will get a machine check due to the bus timeout.
+ */
+
+#define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE"
+
+#undef PCMCIA_BMT_LIMIT
+#define PCMCIA_BMT_LIMIT (6*8)
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	u_long reg = 0;
+
+	switch(vcc) {
+	case 0: break;
+	case 33: reg |= BCSR1_PCVCTL4; break;
+	case 50: reg |= BCSR1_PCVCTL5; break;
+	default: return 1;
+	}
+
+	switch(vpp) {
+	case 0: break;
+	case 33:
+	case 50:
+		if(vcc == vpp)
+			reg |= BCSR1_PCVCTL6;
+		else
+			return 1;
+		break;
+	case 120:
+		reg |= BCSR1_PCVCTL7;
+	default: return 1;
+	}
+
+	if(vcc == 120)
+	   return 1;
+
+	/* first, turn off all power */
+
+	*((uint *)RPX_CSR_ADDR) &= ~(BCSR1_PCVCTL4 | BCSR1_PCVCTL5
+				     | BCSR1_PCVCTL6 | BCSR1_PCVCTL7);
+
+	/* enable new powersettings */
+
+	*((uint *)RPX_CSR_ADDR) |= reg;
+
+	return 0;
+}
+
+#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
+static int hardware_enable (int slot)
+{
+	return 0;	/* No hardware to enable */
+}
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int hardware_disable(int slot)
+{
+	return 0;	/* No hardware to disable */
+}
+#endif	/* CFG_CMD_PCMCIA */
+#endif	/* CONFIG_RPXCLASSIC */
+
+/* -------------------------------------------------------------------- */
+/* (F)ADS Boards from Motorola						*/
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ADS) || defined(CONFIG_FADS)
+
+#ifdef CONFIG_ADS
+#define PCMCIA_BOARD_MSG "ADS"
+#define PCMCIA_GLITCHY_CD  /* My ADS board needs this */
+#else
+#define PCMCIA_BOARD_MSG "FADS"
+#endif
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	u_long reg = 0;
+
+	switch(vpp) {
+	case 0: reg = 0; break;
+	case 50: reg = 1; break;
+	case 120: reg = 2; break;
+	default: return 1;
+	}
+
+	switch(vcc) {
+	case 0: reg = 0; break;
+#ifdef CONFIG_ADS
+	case 50: reg = BCSR1_PCCVCCON; break;
+#endif
+#ifdef CONFIG_FADS
+	case 33: reg = BCSR1_PCCVCC0 | BCSR1_PCCVCC1; break;
+	case 50: reg = BCSR1_PCCVCC1; break;
+#endif
+	default: return 1;
+	}
+
+	/* first, turn off all power */
+
+#ifdef CONFIG_ADS
+	*((uint *)BCSR1) |= BCSR1_PCCVCCON;
+#endif
+#ifdef CONFIG_FADS
+	*((uint *)BCSR1) &= ~(BCSR1_PCCVCC0 | BCSR1_PCCVCC1);
+#endif
+	*((uint *)BCSR1) &= ~BCSR1_PCCVPP_MASK;
+
+	/* enable new powersettings */
+
+#ifdef CONFIG_ADS
+	*((uint *)BCSR1) &= ~reg;
+#endif
+#ifdef CONFIG_FADS
+	*((uint *)BCSR1) |= reg;
+#endif
+
+ 	*((uint *)BCSR1) |= reg << 20;
+
+	return 0;
+}
+
+#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
+
+static int hardware_enable(int slot)
+{
+	*((uint *)BCSR1) &= ~BCSR1_PCCEN;
+	return 0;
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int hardware_disable(int slot)
+{
+	*((uint *)BCSR1) &= ~BCSR1_PCCEN;
+	return 0;
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+#endif	/* (F)ADS */
+
+/* -------------------------------------------------------------------- */
+/* TQM8xxL Boards by TQ Components					*/
+/* SC8xx   Boards by SinoVee Microsystems				*/
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_TQM8xxL) || defined(CONFIG_SVM_SC8xx)
+
+#if defined(CONFIG_TQM8xxL)
+#define PCMCIA_BOARD_MSG "TQM8xxL"
+#endif
+#if defined(CONFIG_SVM_SC8xx)
+#define PCMCIA_BOARD_MSG "SC8xx"
+#endif
+
+static int hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, mask;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/*
+	 * Configure SIUMCR to enable PCMCIA port B
+	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	 */
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(slot);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(slot);
+
+	/*
+	 * Disable interrupts, DMA, and PCMCIA buffers
+	 * (isolate the interface) and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+#ifndef NSCU_OE_INV
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+#endif
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(500);
+
+#ifndef CONFIG_HMI10
+#ifndef CONFIG_NSCU
+	/*
+	 * Configure Port C pins for
+	 * 5 Volts Enable and 3 Volts enable
+	 */
+	immap->im_ioport.iop_pcpar &= ~(0x0002 | 0x0004);
+	immap->im_ioport.iop_pcso  &= ~(0x0002 | 0x0004);
+	/* remove all power */
+
+	immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
+#endif
+#else	/* CONFIG_HMI10 */
+	/*
+	 * Configure Port B  pins for
+	 * 5 Volts Enable and 3 Volts enable
+	 */
+	immap->im_cpm.cp_pbpar &= ~(0x00000300);
+
+	/* remove all power */
+	immap->im_cpm.cp_pbdat |= 0x00000300;
+#endif	/* CONFIG_HMI10 */
+
+	/*
+	 * Make sure there is a card in the slot, then configure the interface.
+	 */
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+		__LINE__,__FUNCTION__,
+		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+#ifndef CONFIG_HMI10
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+#else
+	if (pcmp->pcmc_pipr & (0x10000000 >> (slot << 4))) {
+#endif	/* CONFIG_HMI10 */
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	 * Power On.
+	 */
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	reg  = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+		reg,
+		(reg&PCMCIA_VS1(slot))?"n":"ff",
+		(reg&PCMCIA_VS2(slot))?"n":"ff");
+#ifndef CONFIG_NSCU
+	if ((reg & mask) == mask) {
+#ifndef CONFIG_HMI10
+		immap->im_ioport.iop_pcdat |= 0x0004;
+#else
+		immap->im_cpm.cp_pbdat &= ~(0x0000100);
+#endif	/* CONFIG_HMI10 */
+		puts (" 5.0V card found: ");
+	} else {
+#ifndef CONFIG_HMI10
+		immap->im_ioport.iop_pcdat |= 0x0002;
+#else
+		immap->im_cpm.cp_pbdat &= ~(0x0000200);
+#endif	/* CONFIG_HMI10 */
+		puts (" 3.3V card found: ");
+	}
+#ifndef CONFIG_HMI10
+	immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
+#else
+	immap->im_cpm.cp_pbdir |= 0x00000300;
+#endif	/* CONFIG_HMI10 */
+#else
+	if ((reg & mask) == mask) {
+		puts (" 5.0V card found: ");
+	} else {
+		puts (" 3.3V card found: ");
+	}
+#endif
+#if 0
+	/*  VCC switch error flag, PCMCIA slot INPACK_ pin */
+	cp->cp_pbdir &= ~(0x0020 | 0x0010);
+	cp->cp_pbpar &= ~(0x0020 | 0x0010);
+	udelay(500000);
+#endif
+	udelay(1000);
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(slot);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+#ifndef NSCU_OE_INV
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+#else
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+#endif
+	PCMCIA_PGCRX(slot) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+#ifndef CONFIG_HMI10
+#ifndef CONFIG_NSCU
+	/* remove all power */
+	immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
+#endif
+#else	/* CONFIG_HMI10 */
+	immap->im_cpm.cp_pbdat |= 0x00000300;
+#endif	/* CONFIG_HMI10 */
+
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+#ifndef NSCU_OE_INV
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+#endif
+	PCMCIA_PGCRX(slot) = reg;
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+#ifdef CONFIG_NSCU
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	return 0;
+}
+#else
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("voltage_set: "
+		PCMCIA_BOARD_MSG
+		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	/*
+	 * Disable PCMCIA buffers (isolate the interface)
+	 * and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(slot);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+#ifndef NSCU_OE_INV
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+#else
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+#endif
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(500);
+
+#ifndef CONFIG_HMI10
+	/*
+	 * Configure Port C pins for
+	 * 5 Volts Enable and 3 Volts enable,
+	 * Turn off all power
+	 */
+	debug ("PCMCIA power OFF\n");
+	immap->im_ioport.iop_pcpar &= ~(0x0002 | 0x0004);
+	immap->im_ioport.iop_pcso  &= ~(0x0002 | 0x0004);
+	immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
+
+	reg = 0;
+	switch(vcc) {
+	case  0: 		break;
+	case 33: reg |= 0x0002;	break;
+	case 50: reg |= 0x0004;	break;
+	default: 		goto done;
+	}
+#else	/* CONFIG_HMI10 */
+	/*
+	 * Configure Port B pins for
+	 * 5 Volts Enable and 3 Volts enable,
+	 * Turn off all power
+	 */
+	debug ("PCMCIA power OFF\n");
+	immap->im_cpm.cp_pbpar &= ~(0x00000300);
+	/* remove all power */
+
+	immap->im_cpm.cp_pbdat |= 0x00000300;
+
+	reg = 0;
+	switch(vcc) {
+		case  0:			break;
+		case 33: reg |= 0x00000200;	break;
+		case 50: reg |= 0x00000100;	break;
+		default:			goto done;
+}
+#endif	/* CONFIG_HMI10 */
+
+	/* Checking supported voltages */
+
+	debug ("PIPR: 0x%x --> %s\n",
+		pcmp->pcmc_pipr,
+		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
+
+#ifndef CONFIG_HMI10
+	immap->im_ioport.iop_pcdat |= reg;
+	immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
+#else
+	immap->im_cpm.cp_pbdat &= !reg;
+	immap->im_cpm.cp_pbdir |= 0x00000300;
+#endif	/* CONFIG_HMI10 */
+	if (reg) {
+#ifndef CONFIG_HMI10
+		debug ("PCMCIA powered at %sV\n",
+			(reg&0x0004) ? "5.0" : "3.3");
+#else
+		debug ("PCMCIA powered at %sV\n",
+			(reg&0x00000200) ? "5.0" : "3.3");
+#endif	/* CONFIG_HMI10 */
+	} else {
+		debug ("PCMCIA powered down\n");
+	}
+
+done:
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(slot);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+#ifndef NSCU_OE_INV
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+#else
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+#endif
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+		slot+'A');
+	return (0);
+}
+#endif
+
+#endif	/* TQM8xxL */
+
+
+/* -------------------------------------------------------------------- */
+/* LWMON Board								*/
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LWMON)
+
+#define PCMCIA_BOARD_MSG "LWMON"
+
+/* #define's for MAX1604 Power Switch */
+#define MAX1604_OP_SUS		0x80
+#define MAX1604_VCCBON		0x40
+#define MAX1604_VCC_35		0x20
+#define MAX1604_VCCBHIZ		0x10
+#define MAX1604_VPPBON		0x08
+#define MAX1604_VPPBPBPGM	0x04
+#define MAX1604_VPPBHIZ		0x02
+/* reserved			0x01	*/
+
+static int hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, mask;
+	uchar val;
+
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	/* Switch on PCMCIA port in PIC register 0x60 */
+	reg = pic_read  (0x60);
+	debug ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
+	reg &= ~0x10;
+	/* reg |= 0x08; Vpp not needed */
+	pic_write (0x60, reg);
+#ifdef DEBUG
+	reg = pic_read  (0x60);
+	printf ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
+#endif
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/*
+	 * Configure SIUMCR to enable PCMCIA port B
+	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	 */
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/*
+	 * Disable interrupts, DMA, and PCMCIA buffers
+	 * (isolate the interface) and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	 * Make sure there is a card in the slot, then configure the interface.
+	 */
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+		__LINE__,__FUNCTION__,
+		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	 * Power On.
+	 */
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	reg  = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+		reg,
+		(reg&PCMCIA_VS1(slot))?"n":"ff",
+		(reg&PCMCIA_VS2(slot))?"n":"ff");
+	if ((reg & mask) == mask) {
+		val = 0;		/* VCCB3/5 = 0 ==> use Vx = 5.0 V */
+		puts (" 5.0V card found: ");
+	} else {
+		val = MAX1604_VCC_35;	/* VCCB3/5 = 1 ==> use Vy = 3.3 V */
+		puts (" 3.3V card found: ");
+	}
+
+	/*  switch VCC on */
+	val |= MAX1604_OP_SUS | MAX1604_VCCBON;
+	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+
+	udelay(500000);
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+	uchar val;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+	/* remove all power, put output in high impedance state */
+	val  = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
+	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	/* Switch off PCMCIA port in PIC register 0x60 */
+	reg = pic_read  (0x60);
+	debug ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
+	reg |=  0x10;
+	reg &= ~0x08;
+	pic_write (0x60, reg);
+#ifdef DEBUG
+	reg = pic_read  (0x60);
+	printf ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
+#endif
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+	uchar val;
+
+	debug ("voltage_set: "
+		PCMCIA_BOARD_MSG
+		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	/*
+	 * Disable PCMCIA buffers (isolate the interface)
+	 * and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(_slot_);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	 * Turn off all power (switch to high impedance)
+	 */
+	debug ("PCMCIA power OFF\n");
+	val  = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
+	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+
+	val = 0;
+	switch(vcc) {
+	case  0: 			break;
+	case 33: val = MAX1604_VCC_35;	break;
+	case 50: 			break;
+	default: 			goto done;
+	}
+
+	/* Checking supported voltages */
+
+	debug ("PIPR: 0x%x --> %s\n",
+		pcmp->pcmc_pipr,
+		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
+
+	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+	if (val) {
+		debug ("PCMCIA powered at %sV\n",
+			(val & MAX1604_VCC_35) ? "3.3" : "5.0");
+	} else {
+		debug ("PCMCIA powered down\n");
+	}
+
+done:
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+		slot+'A');
+	return (0);
+}
+
+#endif	/* LWMON */
+
+/* -------------------------------------------------------------------- */
+/* GTH board by Corelatus AB						*/
+/* -------------------------------------------------------------------- */
+#if defined(CONFIG_GTH)
+
+#define PCMCIA_BOARD_MSG "GTH COMPACT FLASH"
+
+static int voltage_set (int slot, int vcc, int vpp)
+{	/* Do nothing */
+	return 0;
+}
+
+static int hardware_enable (int slot)
+{
+	volatile immap_t *immap;
+	volatile cpm8xx_t *cp;
+	volatile pcmconf8xx_t *pcmp;
+	volatile sysconf8xx_t *sysp;
+	uint reg, mask;
+
+	debug ("hardware_enable: GTH Slot %c\n", 'A' + slot);
+
+	immap = (immap_t *) CFG_IMMR;
+	sysp = (sysconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_siu_conf));
+	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia));
+	cp = (cpm8xx_t *) (&(((immap_t *) CFG_IMMR)->im_cpm));
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_);
+
+	/*
+	 * Disable interrupts, DMA, and PCMCIA buffers
+	 * (isolate the interface) and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;	/* active low  */
+	PCMCIA_PGCRX (_slot_) = reg;
+	udelay (500);
+
+	/*
+	 * Make sure there is a card in the slot,
+	 * then configure the interface.
+	 */
+	udelay (10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+		__LINE__, __FUNCTION__,
+		&(pcmp->pcmc_pipr), pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & 0x98000000) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	mask = PCMCIA_VS1 (slot) | PCMCIA_VS2 (slot);
+	reg = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+		   reg,
+		   (reg & PCMCIA_VS1 (slot)) ? "n" : "ff",
+		   (reg & PCMCIA_VS2 (slot)) ? "n" : "ff");
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX (_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX (_slot_) = reg;
+
+	udelay (250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return 0;
+}
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int hardware_disable(int slot)
+{
+	return 0;	/* No hardware to disable */
+}
+#endif	/* CFG_CMD_PCMCIA */
+#endif	/* CONFIG_GTH */
+
+/* -------------------------------------------------------------------- */
+/* ICU862 Boards by Cambridge Broadband Ltd.				*/
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ICU862)
+
+#define PCMCIA_BOARD_MSG "ICU862"
+
+static void cfg_port_B (void);
+
+static int hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, pipr, mask;
+	int i;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/* Configure Port B for TPS2205 PC-Card Power-Interface Switch */
+	cfg_port_B ();
+
+	/*
+	 * Configure SIUMCR to enable PCMCIA port B
+	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	 */
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/*
+	 * Disable interrupts, DMA, and PCMCIA buffers
+	 * (isolate the interface) and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	 * Make sure there is a card in the slot, then configure the interface.
+	 */
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+		__LINE__,__FUNCTION__,
+		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	 * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
+	 */
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	pipr = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+		pipr,
+		(reg&PCMCIA_VS1(slot))?"n":"ff",
+		(reg&PCMCIA_VS2(slot))?"n":"ff");
+
+	reg  = cp->cp_pbdat;
+	if ((pipr & mask) == mask) {
+		reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC |	/* VAVPP => Hi-Z */
+			TPS2205_VCC3);				/* 3V off	*/
+		reg &= ~(TPS2205_VCC5);				/* 5V on	*/
+		puts (" 5.0V card found: ");
+	} else {
+		reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC |	/* VAVPP => Hi-Z */
+			TPS2205_VCC5);				/* 5V off	*/
+		reg &= ~(TPS2205_VCC3);				/* 3V on	*/
+		puts (" 3.3V card found: ");
+	}
+
+	debug ("\nPB DAT: %08x -> 3.3V %s 5.0V %s VPP_PGM %s VPP_VCC %s\n",
+		reg,
+		(reg & TPS2205_VCC3)    ? "off" : "on",
+		(reg & TPS2205_VCC5)    ? "off" : "on",
+		(reg & TPS2205_VPP_PGM) ? "off" : "on",
+		(reg & TPS2205_VPP_VCC) ? "off" : "on" );
+
+	cp->cp_pbdat = reg;
+
+	/*  Wait 500 ms; use this to check for over-current */
+	for (i=0; i<5000; ++i) {
+		if ((cp->cp_pbdat & TPS2205_OC) == 0) {
+			printf ("   *** Overcurrent - Safety shutdown ***\n");
+			cp->cp_pbdat &= ~(TPS2205_SHDN);
+			return (1);
+		}
+		udelay (100);
+	}
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+	/* Shut down */
+	cp->cp_pbdat &= ~(TPS2205_SHDN);
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("voltage_set: "
+		PCMCIA_BOARD_MSG
+		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	/*
+	 * Disable PCMCIA buffers (isolate the interface)
+	 * and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(_slot_);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	 * Configure Port C pins for
+	 * 5 Volts Enable and 3 Volts enable,
+	 * Turn all power pins to Hi-Z
+	 */
+	debug ("PCMCIA power OFF\n");
+	cfg_port_B ();	/* Enables switch, but all in Hi-Z */
+
+	reg  = cp->cp_pbdat;
+
+	switch(vcc) {
+	case  0: 			break;	/* Switch off		*/
+	case 33: reg &= ~TPS2205_VCC3;	break;	/* Switch on 3.3V	*/
+	case 50: reg &= ~TPS2205_VCC5;	break;	/* Switch on 5.0V	*/
+	default: 			goto done;
+	}
+
+	/* Checking supported voltages */
+
+	debug ("PIPR: 0x%x --> %s\n",
+		pcmp->pcmc_pipr,
+		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
+
+	cp->cp_pbdat = reg;
+
+#ifdef DEBUG
+    {
+	char *s;
+
+	if ((reg & TPS2205_VCC3) == 0) {
+		s = "at 3.3V";
+	} else if ((reg & TPS2205_VCC5) == 0) {
+		s = "at 5.0V";
+	} else {
+		s = "down";
+	}
+	printf ("PCMCIA powered %s\n", s);
+    }
+#endif
+
+done:
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+		slot+'A');
+	return (0);
+}
+
+static void cfg_port_B (void)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	uint reg;
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/*
+	 * Configure Port B for TPS2205 PC-Card Power-Interface Switch
+	 *
+	 * Switch off all voltages, assert shutdown
+	 */
+	reg  = cp->cp_pbdat;
+	reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC |	/* VAVPP => Hi-Z */
+		TPS2205_VCC3    | TPS2205_VCC5    |	/* VAVCC => Hi-Z */
+		TPS2205_SHDN);				/* enable switch */
+	cp->cp_pbdat = reg;
+
+	cp->cp_pbpar &= ~(TPS2205_INPUTS | TPS2205_OUTPUTS);
+
+	reg = cp->cp_pbdir & ~(TPS2205_INPUTS);
+	cp->cp_pbdir = reg | TPS2205_OUTPUTS;
+
+	debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n",
+		cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat);
+}
+
+#endif	/* ICU862 */
+
+
+/* -------------------------------------------------------------------- */
+/* C2MON Boards by TTTech Computertechnik AG				*/
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_C2MON)
+
+#define PCMCIA_BOARD_MSG "C2MON"
+
+static void cfg_ports (void);
+
+static int hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, pipr, mask;
+	ushort sreg;
+	int i;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
+	cfg_ports ();
+
+	/*
+	 * Configure SIUMCR to enable PCMCIA port B
+	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	 */
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/*
+	 * Disable interrupts, DMA, and PCMCIA buffers
+	 * (isolate the interface) and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	 * Make sure there is a card in the slot, then configure the interface.
+	 */
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+		__LINE__,__FUNCTION__,
+		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	 * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
+	 */
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	pipr = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+		pipr,
+		(reg&PCMCIA_VS1(slot))?"n":"ff",
+		(reg&PCMCIA_VS2(slot))?"n":"ff");
+
+	sreg = immap->im_ioport.iop_pcdat;
+	if ((pipr & mask) == mask) {
+		sreg |=  (TPS2211_VPPD0 | TPS2211_VPPD1 |	/* VAVPP => Hi-Z */
+			  TPS2211_VCCD1);			/* 5V on	*/
+		sreg &= ~(TPS2211_VCCD0);			/* 3V off	*/
+		puts (" 5.0V card found: ");
+	} else {
+		sreg |=  (TPS2211_VPPD0 | TPS2211_VPPD1 |	/* VAVPP => Hi-Z */
+			  TPS2211_VCCD0);			/* 3V on	*/
+		sreg &= ~(TPS2211_VCCD1);			/* 5V off	*/
+		puts (" 3.3V card found: ");
+	}
+
+	debug ("\nPC DAT: %04x -> 3.3V %s 5.0V %s\n",
+		sreg,
+		( (sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) ? "on" : "off",
+		(!(sreg & TPS2211_VCCD0) &&  (sreg & TPS2211_VCCD1)) ? "on" : "off"
+	);
+
+	immap->im_ioport.iop_pcdat = sreg;
+
+	/*  Wait 500 ms; use this to check for over-current */
+	for (i=0; i<5000; ++i) {
+		if ((cp->cp_pbdat & TPS2211_OC) == 0) {
+		    printf ("   *** Overcurrent - Safety shutdown ***\n");
+		    immap->im_ioport.iop_pcdat &= ~(TPS2211_VCCD0|TPS2211_VCCD1);
+		    return (1);
+		}
+		udelay (100);
+	}
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	/* ALl voltages off / Hi-Z */
+	immap->im_ioport.iop_pcdat |= (TPS2211_VPPD0 | TPS2211_VPPD1 |
+				       TPS2211_VCCD0 | TPS2211_VCCD1 );
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+	ushort sreg;
+
+	debug ("voltage_set: "
+		PCMCIA_BOARD_MSG
+		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	/*
+	 * Disable PCMCIA buffers (isolate the interface)
+	 * and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(_slot_);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	 * Configure Port C pins for
+	 * 5 Volts Enable and 3 Volts enable,
+	 * Turn all power pins to Hi-Z
+	 */
+	debug ("PCMCIA power OFF\n");
+	cfg_ports ();	/* Enables switch, but all in Hi-Z */
+
+	sreg  = immap->im_ioport.iop_pcdat;
+	sreg |= TPS2211_VPPD0 | TPS2211_VPPD1;		/* VAVPP always Hi-Z */
+
+	switch(vcc) {
+	case  0: 			break;	/* Switch off		*/
+	case 33: sreg |=  TPS2211_VCCD0;	/* Switch on 3.3V	*/
+		 sreg &= ~TPS2211_VCCD1;
+		 			break;
+	case 50: sreg &= ~TPS2211_VCCD0;	/* Switch on 5.0V	*/
+		 sreg |=  TPS2211_VCCD1;
+		 			break;
+	default: 			goto done;
+	}
+
+	/* Checking supported voltages */
+
+	debug ("PIPR: 0x%x --> %s\n",
+		pcmp->pcmc_pipr,
+		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
+
+	immap->im_ioport.iop_pcdat = sreg;
+
+#ifdef DEBUG
+    {
+	char *s;
+
+	if ((sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) {
+		s = "at 3.3V";
+	} else if (!(sreg & TPS2211_VCCD0) &&  (sreg & TPS2211_VCCD1)) {
+		s = "at 5.0V";
+	} else {
+		s = "down";
+	}
+	printf ("PCMCIA powered %s\n", s);
+    }
+#endif
+
+done:
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+		slot+'A');
+	return (0);
+}
+
+static void cfg_ports (void)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	ushort sreg;
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/*
+	 * Configure Port C for TPS2211 PC-Card Power-Interface Switch
+	 *
+	 * Switch off all voltages, assert shutdown
+	 */
+	sreg = immap->im_ioport.iop_pcdat;
+	sreg |=  (TPS2211_VPPD0 | TPS2211_VPPD1);	/* VAVPP => Hi-Z */
+	sreg &= ~(TPS2211_VCCD0 | TPS2211_VCCD1);	/* 3V and 5V off */
+	immap->im_ioport.iop_pcdat = sreg;
+
+	immap->im_ioport.iop_pcpar &= ~(TPS2211_OUTPUTS);
+	immap->im_ioport.iop_pcdir |=   TPS2211_OUTPUTS;
+
+	debug ("Set Port C: PAR:     %04x DIR:     %04x DAT:     %04x\n",
+		immap->im_ioport.iop_pcpar,
+		immap->im_ioport.iop_pcdir,
+		immap->im_ioport.iop_pcdat);
+
+	/*
+	 * Configure Port B for TPS2211 PC-Card Power-Interface Switch
+	 *
+	 * Over-Current Input only
+	 */
+	cp->cp_pbpar &= ~(TPS2211_INPUTS);
+	cp->cp_pbdir &= ~(TPS2211_INPUTS);
+
+	debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n",
+		cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat);
+}
+
+#endif	/* C2MON */
+
+/* -------------------------------------------------------------------- */
+/* MBX board from Morotola						*/
+/* -------------------------------------------------------------------- */
+
+#if defined( CONFIG_MBX )
+#include <../board/mbx8xx/csr.h>
+
+/* A lot of this has been taken from the RPX code in this file it works from me.
+   I have added the voltage selection for the MBX board. */
+
+/* MBX voltage bit in control register #2 */
+#define CR2_VPP12       ((uchar)0x10)
+#define CR2_VPPVDD      ((uchar)0x20)
+#define CR2_VDD5        ((uchar)0x40)
+#define CR2_VDD3        ((uchar)0x80)
+
+#define PCMCIA_BOARD_MSG "MBX860"
+
+static int voltage_set (int slot, int vcc, int vpp)
+{
+	uchar reg = 0;
+
+	debug ("voltage_set: PCMCIA_BOARD_MSG Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+		 'A' + slot, vcc / 10, vcc % 10, vpp / 10, vcc % 10);
+
+	switch (vcc) {
+	case 0:
+		break;
+	case 33:
+		reg |= CR2_VDD3;
+		break;
+	case 50:
+		reg |= CR2_VDD5;
+		break;
+	default:
+		return 1;
+	}
+
+	switch (vpp) {
+	case 0:
+		break;
+	case 33:
+	case 50:
+		if (vcc == vpp) {
+			reg |= CR2_VPPVDD;
+		} else {
+			return 1;
+		}
+		break;
+	case 120:
+		reg |= CR2_VPP12;
+		break;
+	default:
+		return 1;
+	}
+
+	/* first, turn off all power */
+	MBX_CSR2 &= ~(CR2_VDDSEL | CR2_VPPSEL);
+
+	/* enable new powersettings */
+	MBX_CSR2 |= reg;
+	debug ("MBX_CSR2 read = 0x%02x\n", MBX_CSR2);
+
+	return (0);
+}
+
+static int hardware_enable (int slot)
+{
+	volatile immap_t *immap;
+	volatile cpm8xx_t *cp;
+	volatile pcmconf8xx_t *pcmp;
+	volatile sysconf8xx_t *sysp;
+	uint reg, mask;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n",
+				  'A' + slot);
+
+	udelay (10000);
+
+	immap = (immap_t *) CFG_IMMR;
+	sysp = (sysconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_siu_conf));
+	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia));
+	cp = (cpm8xx_t *) (&(((immap_t *) CFG_IMMR)->im_cpm));
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_);
+
+	/*
+	 * Disable interrupts, DMA, and PCMCIA buffers
+	 * (isolate the interface) and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;	/* active low  */
+	PCMCIA_PGCRX (_slot_) = reg;
+	udelay (500);
+
+	/* remove all power */
+	voltage_set (slot, 0, 0);
+	/*
+	 * Make sure there is a card in the slot, then configure the interface.
+	 */
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+		__LINE__,__FUNCTION__,
+		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+#ifndef CONFIG_HMI10
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+#else
+	if (pcmp->pcmc_pipr & (0x10000000 >> (slot << 4))) {
+#endif	/* CONFIG_HMI10 */
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	 * Power On.
+	 */
+	mask = PCMCIA_VS1 (_slot_) | PCMCIA_VS2 (_slot_);
+	reg = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n", reg,
+		  (reg & PCMCIA_VS1 (slot)) ? "n" : "ff",
+		  (reg & PCMCIA_VS2 (slot)) ? "n" : "ff");
+
+	if ((reg & mask) == mask) {
+		voltage_set (_slot_, 50, 0);
+		printf (" 5.0V card found: ");
+	} else {
+		voltage_set (_slot_, 33, 0);
+		printf (" 3.3V card found: ");
+	}
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg = PCMCIA_PGCRX (_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;	/* active low  */
+	PCMCIA_PGCRX (_slot_) = reg;
+
+	udelay (250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int hardware_disable (int slot)
+{
+	return 0;	/* No hardware to disable */
+}
+#endif /* CFG_CMD_PCMCIA */
+#endif /* CONFIG_MBX */
+/* -------------------------------------------------------------------- */
+/* R360MPI Board							*/
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_R360MPI)
+
+#define PCMCIA_BOARD_MSG "R360MPI"
+
+
+static int hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, mask;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/*
+	 * Configure SIUMCR to enable PCMCIA port B
+	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	 */
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/*
+	 * Disable interrupts, DMA, and PCMCIA buffers
+	 * (isolate the interface) and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	 * Configure Ports A, B & C pins for
+	 * 5 Volts Enable and 3 Volts enable
+	 */
+	immap->im_ioport.iop_pcpar &= ~(0x0400);
+	immap->im_ioport.iop_pcso  &= ~(0x0400);/*
+	immap->im_ioport.iop_pcdir |= 0x0400;*/
+
+	immap->im_ioport.iop_papar &= ~(0x0200);/*
+	immap->im_ioport.iop_padir |= 0x0200;*/
+#if 0
+	immap->im_ioport.iop_pbpar &= ~(0xC000);
+	immap->im_ioport.iop_pbdir &= ~(0xC000);
+#endif
+	/* remove all power */
+
+	immap->im_ioport.iop_pcdat |= 0x0400;
+	immap->im_ioport.iop_padat |= 0x0200;
+
+	/*
+	 * Make sure there is a card in the slot, then configure the interface.
+	 */
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+		__LINE__,__FUNCTION__,
+		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	 * Power On.
+	 */
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	reg  = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+		reg,
+		(reg&PCMCIA_VS1(slot))?"n":"ff",
+		(reg&PCMCIA_VS2(slot))?"n":"ff");
+	if ((reg & mask) == mask) {
+		immap->im_ioport.iop_pcdat &= ~(0x4000);
+		puts (" 5.0V card found: ");
+	} else {
+		immap->im_ioport.iop_padat &= ~(0x0002);
+		puts (" 3.3V card found: ");
+	}
+	immap->im_ioport.iop_pcdir |= 0x0400;
+	immap->im_ioport.iop_padir |= 0x0200;
+#if 0
+	/*  VCC switch error flag, PCMCIA slot INPACK_ pin */
+	cp->cp_pbdir &= ~(0x0020 | 0x0010);
+	cp->cp_pbpar &= ~(0x0020 | 0x0010);
+	udelay(500000);
+#endif
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+	/* remove all power */
+	immap->im_ioport.iop_pcdat |= 0x0400;
+	immap->im_ioport.iop_padat |= 0x0200;
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("voltage_set: "
+		PCMCIA_BOARD_MSG
+		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	/*
+	 * Disable PCMCIA buffers (isolate the interface)
+	 * and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(_slot_);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	 * Configure Ports A & C pins for
+	 * 5 Volts Enable and 3 Volts enable,
+	 * Turn off all power
+	 */
+	debug ("PCMCIA power OFF\n");
+	immap->im_ioport.iop_pcpar &= ~(0x0400);
+	immap->im_ioport.iop_pcso  &= ~(0x0400);/*
+	immap->im_ioport.iop_pcdir |= 0x0400;*/
+
+	immap->im_ioport.iop_papar &= ~(0x0200);/*
+	immap->im_ioport.iop_padir |= 0x0200;*/
+
+	immap->im_ioport.iop_pcdat |= 0x0400;
+	immap->im_ioport.iop_padat |= 0x0200;
+
+	reg = 0;
+	switch(vcc) {
+	case  0: 		break;
+	case 33: reg |= 0x0200;	break;
+	case 50: reg |= 0x0400;	break;
+	default: 		goto done;
+	}
+
+	/* Checking supported voltages */
+
+	debug ("PIPR: 0x%x --> %s\n",
+		pcmp->pcmc_pipr,
+		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
+
+	if (reg & 0x0200)
+		immap->im_ioport.iop_pcdat &= !reg;
+	if (reg & 0x0400)
+		immap->im_ioport.iop_padat &= !reg;
+	immap->im_ioport.iop_pcdir |= 0x0200;
+	immap->im_ioport.iop_padir |= 0x0400;
+	if (reg) {
+		debug ("PCMCIA powered at %sV\n",
+			(reg&0x0400) ? "5.0" : "3.3");
+	} else {
+		debug ("PCMCIA powered down\n");
+	}
+
+done:
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+		slot+'A');
+	return (0);
+}
+
+#endif	/* R360MPI */
+
+/* -------------------------------------------------------------------- */
+/* KUP4K and KUP4X Boards								*/
+/* -------------------------------------------------------------------- */
+#if defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
+
+#define PCMCIA_BOARD_MSG "KUP"
+
+#define KUP4K_PCMCIA_B_3V3 (0x00020000)
+
+static int hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, mask;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/*
+	 * Configure SIUMCR to enable PCMCIA port B
+	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	 */
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(slot);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(slot);
+
+	/*
+	 * Disable interrupts, DMA, and PCMCIA buffers
+	 * (isolate the interface) and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(2500);
+
+	/*
+	 * Configure Port B pins for
+	 * 3 Volts enable
+	 */
+	if (slot) { /* Slot A is built-in */
+		cp->cp_pbdir |=  KUP4K_PCMCIA_B_3V3;
+		cp->cp_pbpar &= ~KUP4K_PCMCIA_B_3V3;
+		/* remove all power */
+		cp->cp_pbdat |=  KUP4K_PCMCIA_B_3V3; /* active low */
+	}
+	/*
+	 * Make sure there is a card in the slot, then configure the interface.
+	 */
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+		__LINE__,__FUNCTION__,
+		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	 * Power On.
+	 */
+	printf("%s  Slot %c:", slot ? "" : "\n", 'A' + slot);
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	reg  = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+		reg,
+		(reg&PCMCIA_VS1(slot))?"n":"ff",
+		(reg&PCMCIA_VS2(slot))?"n":"ff");
+	if ((reg & mask) == mask) {
+		puts (" 5.0V card found: NOT SUPPORTED !!!\n");
+	} else {
+		if(slot)
+			cp->cp_pbdat &= ~KUP4K_PCMCIA_B_3V3;
+		puts (" 3.3V card found: ");
+	}
+#if 0
+	/*  VCC switch error flag, PCMCIA slot INPACK_ pin */
+	cp->cp_pbdir &= ~(0x0020 | 0x0010);
+	cp->cp_pbpar &= ~(0x0020 | 0x0010);
+	udelay(500000);
+#endif
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(slot);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(slot) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/* remove all power */
+	if (slot)
+		cp->cp_pbdat |= KUP4K_PCMCIA_B_3V3;
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(slot) = reg;
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("voltage_set: "	\
+		PCMCIA_BOARD_MSG	\
+		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	if (!slot) /* Slot A is not configurable */
+		return 0;
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/*
+	 * Disable PCMCIA buffers (isolate the interface)
+	 * and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(slot);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(500);
+
+	debug ("PCMCIA power OFF\n");
+	/*
+	 * Configure Port B pins for
+	 * 3 Volts enable
+	 */
+	cp->cp_pbdir |=  KUP4K_PCMCIA_B_3V3;
+	cp->cp_pbpar &= ~KUP4K_PCMCIA_B_3V3;
+	/* remove all power */
+	cp->cp_pbdat |=  KUP4K_PCMCIA_B_3V3; /* active low */
+
+	switch(vcc) {
+	case  0: 		break;
+	case 33:
+		cp->cp_pbdat &= ~KUP4K_PCMCIA_B_3V3;
+		debug ("PCMCIA powered at 3.3V\n");
+		break;
+	case 50:
+		debug ("PCMCIA: 5Volt vcc not supported\n");
+		break;
+	default:
+		puts("PCMCIA: vcc not supported");
+		break;
+	}
+	udelay(10000);
+	/* Checking supported voltages */
+
+	debug ("PIPR: 0x%x --> %s\n",
+		pcmp->pcmc_pipr,
+		   (pcmp->pcmc_pipr & (0x80000000 >> (slot << 4)))
+			? "only 5 V --> NOT SUPPORTED"
+			: "can do 3.3V");
+
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(slot);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+		slot+'A');
+	return (0);
+}
+
+#endif	/* KUP4K || KUP4X */
+
+
+/* -------------------------------------------------------------------- */
+/* End of Board Specific Stuff						*/
+/* -------------------------------------------------------------------- */
+
+
+/* -------------------------------------------------------------------- */
+/* MPC8xx Specific Stuff - should go to MPC8xx directory		*/
+/* -------------------------------------------------------------------- */
+
+/*
+ * Search this table to see if the windowsize is
+ * supported...
+ */
+
+#define M8XX_SIZES_NO 32
+
+static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] =
+{ 0x00000001, 0x00000002, 0x00000008, 0x00000004,
+  0x00000080, 0x00000040, 0x00000010, 0x00000020,
+  0x00008000, 0x00004000, 0x00001000, 0x00002000,
+  0x00000100, 0x00000200, 0x00000800, 0x00000400,
+
+  0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x01000000, 0x02000000, 0xffffffff, 0x04000000,
+  0x00010000, 0x00020000, 0x00080000, 0x00040000,
+  0x00800000, 0x00400000, 0x00100000, 0x00200000 };
+
+
+/* -------------------------------------------------------------------- */
+
+#if ( ! defined(CONFIG_I82365) && ! defined(CONFIG_PXA_PCMCIA) )
+
+static u_int m8xx_get_graycode(u_int size)
+{
+	u_int k;
+
+	for (k = 0; k < M8XX_SIZES_NO; k++) {
+		if(m8xx_size_to_gray[k] == size)
+			break;
+	}
+
+	if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
+		k = -1;
+
+	return k;
+}
+
+#endif	/* CONFIG_I82365 */
+
+/* -------------------------------------------------------------------- */
+
+#if 0
+static u_int m8xx_get_speed(u_int ns, u_int is_io)
+{
+	u_int reg, clocks, psst, psl, psht;
+
+	if(!ns) {
+
+		/*
+		 * We get called with IO maps setup to 0ns
+		 * if not specified by the user.
+		 * They should be 255ns.
+		 */
+
+		if(is_io)
+			ns = 255;
+		else
+			ns = 100;  /* fast memory if 0 */
+	}
+
+	/*
+	 * In PSST, PSL, PSHT fields we tell the controller
+	 * timing parameters in CLKOUT clock cycles.
+	 * CLKOUT is the same as GCLK2_50.
+	 */
+
+/* how we want to adjust the timing - in percent */
+
+#define ADJ 180 /* 80 % longer accesstime - to be sure */
+
+	clocks = ((M8XX_BUSFREQ / 1000) * ns) / 1000;
+	clocks = (clocks * ADJ) / (100*1000);
+
+	if(clocks >= PCMCIA_BMT_LIMIT) {
+		DEBUG(0, "Max access time limit reached\n");
+		clocks = PCMCIA_BMT_LIMIT-1;
+	}
+
+	psst = clocks / 7;          /* setup time */
+	psht = clocks / 7;          /* hold time */
+	psl  = (clocks * 5) / 7;    /* strobe length */
+
+	psst += clocks - (psst + psht + psl);
+
+	reg =  psst << 12;
+	reg |= psl  << 7;
+	reg |= psht << 16;
+
+	return reg;
+}
+#endif
+
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_PXA_PCMCIA)
+static void print_funcid (int func)
+{
+	puts (indent);
+	switch (func) {
+	case CISTPL_FUNCID_MULTI:
+		puts (" Multi-Function");
+		break;
+	case CISTPL_FUNCID_MEMORY:
+		puts (" Memory");
+		break;
+	case CISTPL_FUNCID_SERIAL:
+		puts (" Serial Port");
+		break;
+	case CISTPL_FUNCID_PARALLEL:
+		puts (" Parallel Port");
+		break;
+	case CISTPL_FUNCID_FIXED:
+		puts (" Fixed Disk");
+		break;
+	case CISTPL_FUNCID_VIDEO:
+		puts (" Video Adapter");
+		break;
+	case CISTPL_FUNCID_NETWORK:
+		puts (" Network Adapter");
+		break;
+	case CISTPL_FUNCID_AIMS:
+		puts (" AIMS Card");
+		break;
+	case CISTPL_FUNCID_SCSI:
+		puts (" SCSI Adapter");
+		break;
+	default:
+		puts (" Unknown");
+		break;
+	}
+	puts (" Card\n");
+}
+#endif	/* CONFIG_IDE_8xx_PCCARD */
+
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_PXA_PCMCIA)
+static void print_fixed (volatile uchar *p)
+{
+	if (p == NULL)
+		return;
+
+	puts(indent);
+
+	switch (*p) {
+	case CISTPL_FUNCE_IDE_IFACE:
+	    {   uchar iface = *(p+2);
+
+		puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown");
+		puts (" interface ");
+		break;
+	    }
+	case CISTPL_FUNCE_IDE_MASTER:
+	case CISTPL_FUNCE_IDE_SLAVE:
+	    {   uchar f1 = *(p+2);
+		uchar f2 = *(p+4);
+
+		puts ((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]");
+
+		if (f1 & CISTPL_IDE_UNIQUE)
+			puts (" [unique]");
+
+		puts ((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]");
+
+		if (f2 & CISTPL_IDE_HAS_SLEEP)
+			puts (" [sleep]");
+
+		if (f2 & CISTPL_IDE_HAS_STANDBY)
+			puts (" [standby]");
+
+		if (f2 & CISTPL_IDE_HAS_IDLE)
+			puts (" [idle]");
+
+		if (f2 & CISTPL_IDE_LOW_POWER)
+			puts (" [low power]");
+
+		if (f2 & CISTPL_IDE_REG_INHIBIT)
+			puts (" [reg inhibit]");
+
+		if (f2 & CISTPL_IDE_HAS_INDEX)
+			puts (" [index]");
+
+		if (f2 & CISTPL_IDE_IOIS16)
+			puts (" [IOis16]");
+
+		break;
+	    }
+	}
+	putc ('\n');
+}
+#endif	/* CONFIG_IDE_8xx_PCCARD */
+
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_PXA_PCMCIA)
+
+#define MAX_IDENT_CHARS		64
+#define	MAX_IDENT_FIELDS	4
+
+static uchar *known_cards[] = {
+	(uchar *)"ARGOSY PnPIDE D5",
+	NULL
+};
+
+static int identify  (volatile uchar *p)
+{
+	uchar id_str[MAX_IDENT_CHARS];
+	uchar data;
+	uchar *t;
+	uchar **card;
+	int i, done;
+
+	if (p == NULL)
+		return (0);	/* Don't know */
+
+	t = id_str;
+	done =0;
+
+	for (i=0; i<=4 && !done; ++i, p+=2) {
+		while ((data = *p) != '\0') {
+			if (data == 0xFF) {
+				done = 1;
+				break;
+			}
+			*t++ = data;
+			if (t == &id_str[MAX_IDENT_CHARS-1]) {
+				done = 1;
+				break;
+			}
+			p += 2;
+		}
+		if (!done)
+			*t++ = ' ';
+	}
+	*t = '\0';
+	while (--t > id_str) {
+		if (*t == ' ')
+			*t = '\0';
+		else
+			break;
+	}
+	puts ((char *)id_str);
+	putc ('\n');
+
+	for (card=known_cards; *card; ++card) {
+		debug ("## Compare against \"%s\"\n", *card);
+		if (strcmp((char *)*card, (char *)id_str) == 0) {	/* found! */
+			debug ("## CARD FOUND ##\n");
+			return (1);
+		}
+	}
+
+	return (0);	/* don't know */
+}
+#endif	/* CONFIG_IDE_8xx_PCCARD */
+
+/* -------------------------------------------------------------------- */
+/* NETTA board by Intracom S.A.						*/
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_NETTA)
+
+/* some sane bit macros */
+#define _BD(_b)				(1U << (31-(_b)))
+#define _BDR(_l, _h)			(((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
+
+#define _BW(_b)				(1U << (15-(_b)))
+#define _BWR(_l, _h)			(((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
+
+#define _BB(_b)				(1U << (7-(_b)))
+#define _BBR(_l, _h)			(((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
+
+#define _B(_b)				_BD(_b)
+#define _BR(_l, _h)			_BDR(_l, _h)
+
+#define PCMCIA_BOARD_MSG "NETTA"
+
+static const unsigned short vppd_masks[2] = { _BW(14), _BW(15) };
+
+static void cfg_vppd(int no)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask;
+
+	if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
+		return;
+
+	mask = vppd_masks[no];
+
+	immap->im_ioport.iop_papar &= ~mask;
+	immap->im_ioport.iop_paodr &= ~mask;
+	immap->im_ioport.iop_padir |=  mask;
+}
+
+static void set_vppd(int no, int what)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask;
+
+	if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
+		return;
+
+	mask = vppd_masks[no];
+
+	if (what)
+		immap->im_ioport.iop_padat |= mask;
+	else
+		immap->im_ioport.iop_padat &= ~mask;
+}
+
+static const unsigned short vccd_masks[2] = { _BW(10), _BW(6) };
+
+static void cfg_vccd(int no)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask;
+
+	if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
+		return;
+
+	mask = vccd_masks[no];
+
+	immap->im_ioport.iop_papar &= ~mask;
+	immap->im_ioport.iop_paodr &= ~mask;
+	immap->im_ioport.iop_padir |=  mask;
+}
+
+static void set_vccd(int no, int what)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask;
+
+	if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
+		return;
+
+	mask = vccd_masks[no];
+
+	if (what)
+		immap->im_ioport.iop_padat |= mask;
+	else
+		immap->im_ioport.iop_padat &= ~mask;
+}
+
+static const unsigned short oc_mask = _BW(8);
+
+static void cfg_oc(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask = oc_mask;
+
+	immap->im_ioport.iop_pcdir &= ~mask;
+	immap->im_ioport.iop_pcso  &= ~mask;
+	immap->im_ioport.iop_pcint &= ~mask;
+	immap->im_ioport.iop_pcpar &= ~mask;
+}
+
+static int get_oc(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask = oc_mask;
+	int what;
+
+	what = !!(immap->im_ioport.iop_pcdat & mask);;
+	return what;
+}
+
+static const unsigned short shdn_mask = _BW(12);
+
+static void cfg_shdn(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask;
+
+	mask = shdn_mask;
+
+	immap->im_ioport.iop_papar &= ~mask;
+	immap->im_ioport.iop_paodr &= ~mask;
+	immap->im_ioport.iop_padir |=  mask;
+}
+
+static void set_shdn(int what)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask;
+
+	mask = shdn_mask;
+
+	if (what)
+		immap->im_ioport.iop_padat |= mask;
+	else
+		immap->im_ioport.iop_padat &= ~mask;
+}
+
+static void cfg_ports (void);
+
+static int hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, pipr, mask;
+	int i;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
+	cfg_ports ();
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/*
+	 * Disable interrupts, DMA, and PCMCIA buffers
+	 * (isolate the interface) and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(500);
+
+	/*
+	 * Make sure there is a card in the slot, then configure the interface.
+	 */
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+		__LINE__,__FUNCTION__,
+		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	 * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
+	 */
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	pipr = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+		pipr,
+		(reg&PCMCIA_VS1(slot))?"n":"ff",
+		(reg&PCMCIA_VS2(slot))?"n":"ff");
+
+	if ((pipr & mask) == mask) {
+		set_vppd(0, 1); set_vppd(1, 1); 		/* VAVPP => Hi-Z */
+		set_vccd(0, 0); set_vccd(1, 1); 		/* 5V on, 3V off */
+		puts (" 5.0V card found: ");
+	} else {
+		set_vppd(0, 1); set_vppd(1, 1); 		/* VAVPP => Hi-Z */
+		set_vccd(0, 1); set_vccd(1, 0); 		/* 5V off, 3V on */
+		puts (" 3.3V card found: ");
+	}
+
+	/*  Wait 500 ms; use this to check for over-current */
+	for (i=0; i<5000; ++i) {
+		if (!get_oc()) {
+			printf ("   *** Overcurrent - Safety shutdown ***\n");
+			set_vccd(0, 0); set_vccd(1, 0); 		/* VAVPP => Hi-Z */
+			return (1);
+		}
+		udelay (100);
+	}
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	/* All voltages off / Hi-Z */
+			set_vppd(0, 1); set_vppd(1, 1);
+	set_vccd(0, 1); set_vccd(1, 1);
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+	ushort sreg;
+
+	debug ("voltage_set: "
+		PCMCIA_BOARD_MSG
+		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	/*
+	 * Disable PCMCIA buffers (isolate the interface)
+	 * and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(_slot_);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	 * Configure Port C pins for
+	 * 5 Volts Enable and 3 Volts enable,
+	 * Turn all power pins to Hi-Z
+	 */
+	debug ("PCMCIA power OFF\n");
+	cfg_ports ();	/* Enables switch, but all in Hi-Z */
+
+	sreg  = immap->im_ioport.iop_pcdat;
+	set_vppd(0, 1); set_vppd(1, 1);
+
+	switch(vcc) {
+	case  0:
+		break;	/* Switch off		*/
+
+	case 33:
+		set_vccd(0, 1); set_vccd(1, 0);
+		break;
+
+	case 50:
+		set_vccd(0, 0); set_vccd(1, 1);
+		break;
+
+	default:
+		goto done;
+	}
+
+	/* Checking supported voltages */
+
+	debug ("PIPR: 0x%x --> %s\n",
+		pcmp->pcmc_pipr,
+		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
+
+done:
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+		slot+'A');
+	return (0);
+}
+
+static void cfg_ports (void)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+
+	cfg_vppd(0); cfg_vppd(1);	/* VPPD0,VPPD1 VAVPP => Hi-Z */
+	cfg_vccd(0); cfg_vccd(1);	/* 3V and 5V off */
+	cfg_shdn();
+	cfg_oc();
+
+	/*
+	 * Configure Port A for TPS2211 PC-Card Power-Interface Switch
+	 *
+	 * Switch off all voltages, assert shutdown
+	 */
+	set_vppd(0, 1); set_vppd(1, 1);
+	set_vccd(0, 0); set_vccd(1, 0);
+	set_shdn(1);
+
+	udelay(100000);
+}
+
+#endif	/* NETTA */
+
+
+/* -------------------------------------------------------------------- */
+/* UC100 Boards                                          		*/
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_UC100)
+
+#define PCMCIA_BOARD_MSG "UC100"
+
+/*
+ * Remark: don't turn off OE "__MY_PCMCIA_GCRX_CXOE" on UC100 board.
+ *         This leads to board-hangup! (sr, 8 Dez. 2004)
+ */
+
+static void cfg_ports (void);
+
+static int hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, mask;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
+	cfg_ports ();
+
+	/*
+	 * Configure SIUMCR to enable PCMCIA port B
+	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	 */
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/*
+	 * Disable interrupts, DMA, and PCMCIA buffers
+	 * (isolate the interface) and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	 * Make sure there is a card in the slot, then configure the interface.
+	 */
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+		__LINE__,__FUNCTION__,
+		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	 * Power On.
+	 */
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	reg  = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+		reg,
+		(reg&PCMCIA_VS1(slot))?"n":"ff",
+		(reg&PCMCIA_VS2(slot))?"n":"ff");
+	if ((reg & mask) == mask) {
+		puts (" 5.0V card found: ");
+	} else {
+		puts (" 3.3V card found: ");
+	}
+
+	/*  switch VCC on */
+	immap->im_ioport.iop_padat |= 0x8000; /* power enable 3.3V */
+
+	udelay(10000);
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+	/* switch VCC off */
+	immap->im_ioport.iop_padat &= ~0x8000; /* power disable 3.3V */
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("voltage_set: "
+		PCMCIA_BOARD_MSG
+		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	/*
+	 * Disable PCMCIA buffers (isolate the interface)
+	 * and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(_slot_);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	 * Configure Port C pins for
+	 * 5 Volts Enable and 3 Volts enable,
+	 * Turn all power pins to Hi-Z
+	 */
+	debug ("PCMCIA power OFF\n");
+	cfg_ports ();	/* Enables switch, but all in Hi-Z */
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+		slot+'A');
+	return (0);
+}
+
+static void cfg_ports (void)
+{
+	volatile immap_t	*immap;
+
+	immap = (immap_t *)CFG_IMMR;
+
+	/*
+	 * Configure Port A for MAX1602 PC-Card Power-Interface Switch
+	 */
+	immap->im_ioport.iop_padat &= ~0x8000;	/* set port x output to low */
+	immap->im_ioport.iop_padir |= 0x8000;	/* enable port x as output */
+
+	debug ("Set Port A: PAR: %08x DIR: %08x DAT: %08x\n",
+	       immap->im_ioport.iop_papar, immap->im_ioport.iop_padir,
+	       immap->im_ioport.iop_padat);
+}
+
+#endif	/* UC100 */
+
+
+/* -------------------------------------------------------------------- */
+
+#endif /* CFG_CMD_PCMCIA || (CFG_CMD_IDE && CONFIG_IDE_8xx_PCCARD) */
+
+/**************************************************/
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+U_BOOT_CMD(
+	pinit,	2,	1,	do_pinit,
+	"pinit   - PCMCIA sub-system\n",
+	"on  - power on PCMCIA socket\n"
+	"pinit off - power off PCMCIA socket\n"
+);
+#endif