path: root/drivers/net/wireless/rtl8188C_8192C/include/rtl8192d_dm.h

/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *                                        
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/
#ifndef	__RTL8192D_DM_H__
#define __RTL8192D_DM_H__
//============================================================
// Description:
//
// This file is for 92CE/92CU dynamic mechanism only
//
//
//============================================================
//============================================================
// Global var
//============================================================

extern u32 EDCAParam[maxAP][3] ;

//============================================================
// structure and define
//============================================================

typedef struct _FALSE_ALARM_STATISTICS{
	u32	Cnt_Parity_Fail;
	u32	Cnt_Rate_Illegal;
	u32	Cnt_Crc8_fail;
	u32	Cnt_Mcs_fail;
	u32	Cnt_Ofdm_fail;
	u32	Cnt_Cck_fail;
	u32	Cnt_all;
	u32	Cnt_Fast_Fsync;
	u32	Cnt_SB_Search_fail;
}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;

typedef struct _Dynamic_Power_Saving_
{
	u8		PreCCAState;
	u8		CurCCAState;

	u8		PreRFState;
	u8		CurRFState;

	//int		Rssi_val_min;
	
}PS_T,*pPS_T;

typedef struct _Dynamic_Initial_Gain_Threshold_
{
	u8		Dig_Enable_Flag;
	u8		Dig_Ext_Port_Stage;
	
	int		RssiLowThresh;
	int		RssiHighThresh;

	u32		FALowThresh;
	u32		FAHighThresh;

	u8		CurSTAConnectState;
	u8		PreSTAConnectState;
	u8		CurMultiSTAConnectState;

	u8		PreIGValue;
	u8		CurIGValue;
	u8	       BackupIGValue;

	char		BackoffVal;
	char		BackoffVal_range_max;
	char		BackoffVal_range_min;
	u8		rx_gain_range_max;
	u8		rx_gain_range_min;
	u8		Rssi_val_min;

	u8		PreCCKPDState;
	u8		CurCCKPDState;

	u8		LargeFAHit;
	u8		ForbiddenIGI;
	u32		Recover_cnt;
	u8		rx_gain_range_min_nolink;
}DIG_T,*pDIG_T;

typedef enum tag_Dynamic_Init_Gain_Operation_Type_Definition
{
	DIG_TYPE_THRESH_HIGH	= 0,
	DIG_TYPE_THRESH_LOW	= 1,
	DIG_TYPE_BACKOFF		= 2,
	DIG_TYPE_RX_GAIN_MIN	= 3,
	DIG_TYPE_RX_GAIN_MAX	= 4,
	DIG_TYPE_ENABLE 		= 5,
	DIG_TYPE_DISABLE 		= 6,
	DIG_OP_TYPE_MAX
}DM_DIG_OP_E;

typedef enum tag_CCK_Packet_Detection_Threshold_Type_Definition
{
	CCK_PD_STAGE_LowRssi = 0,
	CCK_PD_STAGE_HighRssi = 1,
	CCK_PD_STAGE_MAX = 3,
}DM_CCK_PDTH_E;

typedef enum tag_1R_CCA_Type_Definition
{
	CCA_MIN = 0,
	CCA_1R =1,
	CCA_2R = 2,
	CCA_MAX = 3,
}DM_1R_CCA_E;

typedef enum tag_RF_Type_Definition
{
	RF_Save =0,
	RF_Normal = 1,
	RF_MAX = 2,
}DM_RF_E;

typedef enum tag_DIG_EXT_PORT_ALGO_Definition
{
	DIG_EXT_PORT_STAGE_0 = 0,
	DIG_EXT_PORT_STAGE_1 = 1,
	DIG_EXT_PORT_STAGE_2 = 2,
	DIG_EXT_PORT_STAGE_3 = 3,
	DIG_EXT_PORT_STAGE_MAX = 4,
}DM_DIG_EXT_PORT_ALG_E;


typedef enum tag_DIG_Connect_Definition
{
	DIG_STA_DISCONNECT = 0,	
	DIG_STA_CONNECT = 1,
	DIG_STA_BEFORE_CONNECT = 2,
	DIG_MultiSTA_DISCONNECT = 3,
	DIG_MultiSTA_CONNECT = 4,
	DIG_CONNECT_MAX
}DM_DIG_CONNECT_E;


#define		DM_DIG_THRESH_HIGH			40
#define		DM_DIG_THRESH_LOW			35

#define		DM_FALSEALARM_THRESH_LOW	400
#define		DM_FALSEALARM_THRESH_HIGH	1000

#define		DM_DIG_MAX					0x3e
#define		DM_DIG_MIN					0x1e //0x22//0x1c

#define		DM_DIG_FA_UPPER				0x32
#define		DM_DIG_FA_LOWER				0x20

//vivi 92c&92d has different definition, 20110504
//this is for 92c
#define		DM_DIG_FA_TH0				0x200//0x20
#define		DM_DIG_FA_TH1				0x300//0x100
#define		DM_DIG_FA_TH2				0x400//0x200
//this is for 92d
#define		DM_DIG_FA_TH0_92D			0x100
#define		DM_DIG_FA_TH1_92D			0x150
#define		DM_DIG_FA_TH2_92D			0x250

#define		DM_DIG_BACKOFF_MAX			12
#define		DM_DIG_BACKOFF_MIN			(-4)
#define		DM_DIG_BACKOFF_DEFAULT		10

#define		RxPathSelection_SS_TH_low		30
#define		RxPathSelection_diff_TH			18

#define		DM_RATR_STA_INIT			0
#define		DM_RATR_STA_HIGH			1
#define 		DM_RATR_STA_MIDDLE		2
#define 		DM_RATR_STA_LOW			3

#define		CTSToSelfTHVal					30
#define		RegC38_TH						20

#define		WAIotTHVal						25

//Dynamic Tx Power Control Threshold
#define		TX_POWER_NEAR_FIELD_THRESH_LVL2	74
#define		TX_POWER_NEAR_FIELD_THRESH_LVL1	67

#define		TxHighPwrLevel_Normal		0	
#define		TxHighPwrLevel_Level1		1
#define		TxHighPwrLevel_Level2		2
#define		TxHighPwrLevel_BT1			3
#define		TxHighPwrLevel_BT2			4
#define		TxHighPwrLevel_15			5
#define		TxHighPwrLevel_35			6
#define		TxHighPwrLevel_50			7
#define		TxHighPwrLevel_70			8
#define		TxHighPwrLevel_100			9

#define		DM_Type_ByFW			0
#define		DM_Type_ByDriver		1

typedef struct _RATE_ADAPTIVE
{
	u8				RateAdaptiveDisabled;
	u8				RATRState;
	u16				reserve;	
	
	u32				HighRSSIThreshForRA;
	u32				High2LowRSSIThreshForRA;
	u8				Low2HighRSSIThreshForRA40M;
	u32				LowRSSIThreshForRA40M;	
	u8				Low2HighRSSIThreshForRA20M;
	u32				LowRSSIThreshForRA20M;	
	u32				UpperRSSIThresholdRATR;
	u32				MiddleRSSIThresholdRATR;
	u32				LowRSSIThresholdRATR;
	u32				LowRSSIThresholdRATR40M;
	u32				LowRSSIThresholdRATR20M;
	u8				PingRSSIEnable;	//cosa add for Netcore long range ping issue
	u32				PingRSSIRATR;	//cosa add for Netcore long range ping issue
	u32				PingRSSIThreshForRA;//cosa add for Netcore long range ping issue
	u32				LastRATR;
	u8				PreRATRState;
	
} RATE_ADAPTIVE, *PRATE_ADAPTIVE;

typedef enum tag_SW_Antenna_Switch_Definition
{
	Antenna_B = 1,
	Antenna_A = 2,
	Antenna_MAX = 3,
}DM_SWAS_E;

// 20100514 Joseph: Add definition for antenna switching test after link.
// This indicates two different the steps. 
// In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air.
// In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK
// with original RSSI to determine if it is necessary to switch antenna.
#define SWAW_STEP_PEAK		0
#define SWAW_STEP_DETERMINE	1

#define	TP_MODE		0
#define	RSSI_MODE		1
#define	TRAFFIC_LOW	0
#define	TRAFFIC_HIGH	1

//=============================
//Neil Chen---2011--06--15--
//==============================
//3 PathDiv 
typedef struct _SW_Antenna_Switch_
{
	u8		try_flag;
	s32		PreRSSI;
	u8		CurAntenna;
	u8		PreAntenna;
	u8		RSSI_Trying;
	u8		TestMode;
	u8		bTriggerAntennaSwitch;
	u8		SelectAntennaMap;

	// Before link Antenna Switch check
	u8		SWAS_NoLink_State;
	u32		SWAS_NoLink_BK_Reg860;
}SWAT_T, *pSWAT_T;
//========================================

struct 	dm_priv	
{
	u8	DM_Type;
	u8	DMFlag, DMFlag_tmp;

	//for DIG
	u8	bDMInitialGainEnable;
	//u8	binitialized; // for dm_initial_gain_Multi_STA use.
	DIG_T	DM_DigTable;

	PS_T	DM_PSTable;

	FALSE_ALARM_STATISTICS	FalseAlmCnt;	
	
	//for rate adaptive, in fact,  88c/92c fw will handle this
	u8	bUseRAMask;
	RATE_ADAPTIVE	RateAdaptive;

	//* Upper and Lower Signal threshold for Rate Adaptive*/
	int	UndecoratedSmoothedPWDB;
	int	EntryMinUndecoratedSmoothedPWDB;
	int	EntryMaxUndecoratedSmoothedPWDB;
	int	MinUndecoratedPWDBForDM;
	int	LastMinUndecoratedPWDBForDM;
#ifdef CONFIG_DUALMAC_CONCURRENT
	int	RssiValMinForAnotherMacOfDMSP;
	u32	CurDigValueForAnotherMacOfDMSP;
	BOOLEAN		bWriteDigForAnotherMacOfDMSP;
	BOOLEAN		bChangeCCKPDStateForAnotherMacOfDMSP;
	u8	CurCCKPDStateForAnotherMacOfDMSP;
	BOOLEAN		bChangeTxHighPowerLvlForAnotherMacOfDMSP;
	u8	CurTxHighLvlForAnotherMacOfDMSP;
#endif

	//for High Power
	u8	bDynamicTxPowerEnable;
	u8	LastDTPLvl;
	u8	DynamicTxHighPowerLvl;//Add by Jacken Tx Power Control for Near/Far Range 2008/03/06
		
	//for tx power tracking
	u8	bTXPowerTracking;
	u8	TXPowercount;
	u8	bTXPowerTrackingInit;	
	u8	TxPowerTrackControl;	//for mp mode, turn off txpwrtracking as default
	u8	TM_Trigger;

	u8	ThermalMeter[2];	// ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
	u8	ThermalValue;
	u8	ThermalValue_LCK;
	u8	ThermalValue_IQK;
	u8	ThermalValue_AVG[AVG_THERMAL_NUM];
	u8	ThermalValue_AVG_index;
	u8	ThermalValue_RxGain;
	u8	ThermalValue_Crystal;
	u8	Delta_IQK;
	u8	Delta_LCK;
	u8	bRfPiEnable;
	u8	bReloadtxpowerindex;
	u8	bDoneTxpower;

	//for APK
	u32	APKoutput[2][2];	//path A/B; output1_1a/output1_2a
	u8	bAPKdone;
	u8	bAPKThermalMeterIgnore;
	BOOLEAN		bDPKdone[2];
	BOOLEAN		bDPKstore;
	BOOLEAN		bDPKworking;
	u8	OFDM_min_index_internalPA_DPK[2];
	u8	TxPowerLevelDPK[2];

	u32	RegA24;

	//for IQK
	u32	Reg874;
	u32	RegC08;
	u32	Reg88C;
	u8	Reg522;
	u8	Reg550;
	u8	Reg551;
	u32	Reg870;
	u32	ADDA_backup[IQK_ADDA_REG_NUM];
	u32	IQK_MAC_backup[IQK_MAC_REG_NUM];
	u32	IQK_BB_backup[IQK_BB_REG_NUM];

	u8	bCCKinCH14;

	char	CCK_index;
	//u8 Record_CCK_20Mindex;
	//u8 Record_CCK_40Mindex;
	char	OFDM_index[2];

	SWAT_T DM_SWAT_Table;

	//for TxPwrTracking
	int	RegE94;
	int 	RegE9C;
	int	RegEB4;
	int	RegEBC;
#if MP_DRIVER == 1
	u8	RegC04_MP;
	u32	RegD04_MP;
#endif
	u32	TXPowerTrackingCallbackCnt;	//cosa add for debug

	u32	prv_traffic_idx; // edca turbo

	u32	RegRF3C[2];	//pathA / pathB

	// Add for Reading Initial Data Rate SEL Register 0x484 during watchdog. Using for fill tx desc. 2011.3.21 by Thomas
	u8	INIDATA_RATE[32];
};


/*------------------------Export global variable----------------------------*/
/*------------------------Export global variable----------------------------*/
/*------------------------Export Marco Definition---------------------------*/
//#define DM_MultiSTA_InitGainChangeNotify(Event) {DM_DigTable.CurMultiSTAConnectState = Event;}


//============================================================
// function prototype
//============================================================
void rtl8192d_init_dm_priv(IN PADAPTER Adapter);
void rtl8192d_deinit_dm_priv(IN PADAPTER Adapter);
void	rtl8192d_InitHalDm(IN PADAPTER Adapter);
void	rtl8192d_HalDmWatchDog(IN PADAPTER Adapter);

VOID rtl8192d_dm_CheckTXPowerTracking(IN PADAPTER Adapter);

#endif	//__HAL8190PCIDM_H__