1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
|
#ifndef _NMIDRV_CUSTOM_H_
#define _NMIDRV_CUSTOM_H_
/******************************************************************************
**
** Copyright (c) Newport Media Inc. All rights reserved.
**
** Module Name: nmidrv_custom.h
**
** This module implements the porting interface for the NMI ATV driver.
** It can be used as an example for the driver porting.
**
**
*******************************************************************************/
#include <mach/wmt_iomux.h>
//if pin is unuse,please define it as 0xff
#define NMI_PIN_UNUSE 0xFF
//step 1: configure NMI600 power pin and reset pin .
//if VDDIO and VCORE use each pin, define NMI_POWER_VDDIO_PIN & NMI_POWER_VCORE_PIN
//if VDDIO and VCORE use same pin, only define NMI_POWER_VDDIO_PIN,
//and define NMI_POWER_VCORE_PIN as 0xff !!!
#define NMI_POWER_VDDIO_PIN NMI_PIN_UNUSE
#define NMI_POWER_VCORE_PIN WMT_PIN_GP0_GPIO2
#define NMI_RESET_PIN WMT_PIN_GP62_SUSGPIO0
// step 2: configure NMI600 i2c bus .
//if use hardware I2C , please define NMI_HW_I2C
#define NMI_HW_I2C
#define NMI_HW_I2C_PORT 4
#define NMI_I2C_RW_LENGTH 256
//if use gpio i2c , please modify the defination below
// note: when nmi600 power off, nmi600 iic sda and scl will be set to input mode.
// so if other devices share iic with nmi600, maybe i2c needs initilize again.
#define NMI_SCL_PIN NMI_PIN_UNUSE
#define NMI_SDA_PIN NMI_PIN_UNUSE
/******************************************************************************
**
** (B) Nmi Function Prototype (for porting on MTK 65XX)
**
*******************************************************************************/
#define NMI_SET_GPIO_MODE_ENABLE(PIN) if(PIN!=NMI_PIN_UNUSE) \
gpio_request(PIN, "ATV,DTV")
#define NMI_SET_GPIO_DIR(PIN,DIR) \
do { \
if (PIN!=NMI_PIN_UNUSE) { \
if (DIR) \
gpio_direction_output(PIN, 1); \
else \
gpio_direction_input(PIN); \
} \
} while (0)
#define NMI_SET_GPIO_PULL_DISABLE(PIN) if(PIN!=NMI_PIN_UNUSE) \
wmt_gpio_setpull(PIN, WMT_GPIO_PULL_NONE)
#define NMI_SET_GPIO_PULL_ENABLE(PIN) if(PIN!=NMI_PIN_UNUSE) \
wmt_gpio_setpull(PIN, WMT_GPIO_PULL_UP)
#define NMI_SET_GPIO_LEVEL(PIN,LEVEL) if(PIN!=NMI_PIN_UNUSE) \
gpio_set_value(PIN, LEVEL)
#define NMI_GET_GPIO_LEVEL(PIN) gpio_get_value(PIN)
#endif /*_NMIDRV_CUSTOM_H_*/
|
