diff options
Diffstat (limited to 'sound/soc/pxa/pxa-ssp.c')
| -rw-r--r-- | sound/soc/pxa/pxa-ssp.c | 845 |
1 files changed, 845 insertions, 0 deletions
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c new file mode 100644 index 00000000..fd04ce13 --- /dev/null +++ b/sound/soc/pxa/pxa-ssp.c @@ -0,0 +1,845 @@ +/* + * pxa-ssp.c -- ALSA Soc Audio Layer + * + * Copyright 2005,2008 Wolfson Microelectronics PLC. + * Author: Liam Girdwood + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * TODO: + * o Test network mode for > 16bit sample size + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/pxa2xx_ssp.h> + +#include <asm/irq.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/initval.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/pxa2xx-lib.h> + +#include <mach/hardware.h> +#include <mach/dma.h> +#include <mach/audio.h> + +#include "../../arm/pxa2xx-pcm.h" +#include "pxa-ssp.h" + +/* + * SSP audio private data + */ +struct ssp_priv { + struct ssp_device *ssp; + unsigned int sysclk; + int dai_fmt; +#ifdef CONFIG_PM + uint32_t cr0; + uint32_t cr1; + uint32_t to; + uint32_t psp; +#endif +}; + +static void dump_registers(struct ssp_device *ssp) +{ + dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n", + pxa_ssp_read_reg(ssp, SSCR0), pxa_ssp_read_reg(ssp, SSCR1), + pxa_ssp_read_reg(ssp, SSTO)); + + dev_dbg(&ssp->pdev->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n", + pxa_ssp_read_reg(ssp, SSPSP), pxa_ssp_read_reg(ssp, SSSR), + pxa_ssp_read_reg(ssp, SSACD)); +} + +static void pxa_ssp_enable(struct ssp_device *ssp) +{ + uint32_t sscr0; + + sscr0 = __raw_readl(ssp->mmio_base + SSCR0) | SSCR0_SSE; + __raw_writel(sscr0, ssp->mmio_base + SSCR0); +} + +static void pxa_ssp_disable(struct ssp_device *ssp) +{ + uint32_t sscr0; + + sscr0 = __raw_readl(ssp->mmio_base + SSCR0) & ~SSCR0_SSE; + __raw_writel(sscr0, ssp->mmio_base + SSCR0); +} + +struct pxa2xx_pcm_dma_data { + struct pxa2xx_pcm_dma_params params; + char name[20]; +}; + +static struct pxa2xx_pcm_dma_params * +pxa_ssp_get_dma_params(struct ssp_device *ssp, int width4, int out) +{ + struct pxa2xx_pcm_dma_data *dma; + + dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL); + if (dma == NULL) + return NULL; + + snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id, + width4 ? "32-bit" : "16-bit", out ? "out" : "in"); + + dma->params.name = dma->name; + dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx); + dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) : + (DCMD_INCTRGADDR | DCMD_FLOWSRC)) | + (width4 ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16; + dma->params.dev_addr = ssp->phys_base + SSDR; + + return &dma->params; +} + +static int pxa_ssp_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + int ret = 0; + + if (!cpu_dai->active) { + clk_enable(ssp->clk); + pxa_ssp_disable(ssp); + } + + kfree(snd_soc_dai_get_dma_data(cpu_dai, substream)); + snd_soc_dai_set_dma_data(cpu_dai, substream, NULL); + + return ret; +} + +static void pxa_ssp_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *cpu_dai) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + + if (!cpu_dai->active) { + pxa_ssp_disable(ssp); + clk_disable(ssp->clk); + } + + kfree(snd_soc_dai_get_dma_data(cpu_dai, substream)); + snd_soc_dai_set_dma_data(cpu_dai, substream, NULL); +} + +#ifdef CONFIG_PM + +static int pxa_ssp_suspend(struct snd_soc_dai *cpu_dai) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + + if (!cpu_dai->active) + clk_enable(ssp->clk); + + priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0); + priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1); + priv->to = __raw_readl(ssp->mmio_base + SSTO); + priv->psp = __raw_readl(ssp->mmio_base + SSPSP); + + pxa_ssp_disable(ssp); + clk_disable(ssp->clk); + return 0; +} + +static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE; + + clk_enable(ssp->clk); + + __raw_writel(sssr, ssp->mmio_base + SSSR); + __raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0); + __raw_writel(priv->cr1, ssp->mmio_base + SSCR1); + __raw_writel(priv->to, ssp->mmio_base + SSTO); + __raw_writel(priv->psp, ssp->mmio_base + SSPSP); + + if (cpu_dai->active) + pxa_ssp_enable(ssp); + else + clk_disable(ssp->clk); + + return 0; +} + +#else +#define pxa_ssp_suspend NULL +#define pxa_ssp_resume NULL +#endif + +/** + * ssp_set_clkdiv - set SSP clock divider + * @div: serial clock rate divider + */ +static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div) +{ + u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); + + if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) { + sscr0 &= ~0x0000ff00; + sscr0 |= ((div - 2)/2) << 8; /* 2..512 */ + } else { + sscr0 &= ~0x000fff00; + sscr0 |= (div - 1) << 8; /* 1..4096 */ + } + pxa_ssp_write_reg(ssp, SSCR0, sscr0); +} + +/** + * pxa_ssp_get_clkdiv - get SSP clock divider + */ +static u32 pxa_ssp_get_scr(struct ssp_device *ssp) +{ + u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); + u32 div; + + if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) + div = ((sscr0 >> 8) & 0xff) * 2 + 2; + else + div = ((sscr0 >> 8) & 0xfff) + 1; + return div; +} + +/* + * Set the SSP ports SYSCLK. + */ +static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + int val; + + u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & + ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); + + dev_dbg(&ssp->pdev->dev, + "pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n", + cpu_dai->id, clk_id, freq); + + switch (clk_id) { + case PXA_SSP_CLK_NET_PLL: + sscr0 |= SSCR0_MOD; + break; + case PXA_SSP_CLK_PLL: + /* Internal PLL is fixed */ + if (cpu_is_pxa25x()) + priv->sysclk = 1843200; + else + priv->sysclk = 13000000; + break; + case PXA_SSP_CLK_EXT: + priv->sysclk = freq; + sscr0 |= SSCR0_ECS; + break; + case PXA_SSP_CLK_NET: + priv->sysclk = freq; + sscr0 |= SSCR0_NCS | SSCR0_MOD; + break; + case PXA_SSP_CLK_AUDIO: + priv->sysclk = 0; + pxa_ssp_set_scr(ssp, 1); + sscr0 |= SSCR0_ACS; + break; + default: + return -ENODEV; + } + + /* The SSP clock must be disabled when changing SSP clock mode + * on PXA2xx. On PXA3xx it must be enabled when doing so. */ + if (!cpu_is_pxa3xx()) + clk_disable(ssp->clk); + val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0; + pxa_ssp_write_reg(ssp, SSCR0, val); + if (!cpu_is_pxa3xx()) + clk_enable(ssp->clk); + + return 0; +} + +/* + * Set the SSP clock dividers. + */ +static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + int val; + + switch (div_id) { + case PXA_SSP_AUDIO_DIV_ACDS: + val = (pxa_ssp_read_reg(ssp, SSACD) & ~0x7) | SSACD_ACDS(div); + pxa_ssp_write_reg(ssp, SSACD, val); + break; + case PXA_SSP_AUDIO_DIV_SCDB: + val = pxa_ssp_read_reg(ssp, SSACD); + val &= ~SSACD_SCDB; +#if defined(CONFIG_PXA3xx) + if (cpu_is_pxa3xx()) + val &= ~SSACD_SCDX8; +#endif + switch (div) { + case PXA_SSP_CLK_SCDB_1: + val |= SSACD_SCDB; + break; + case PXA_SSP_CLK_SCDB_4: + break; +#if defined(CONFIG_PXA3xx) + case PXA_SSP_CLK_SCDB_8: + if (cpu_is_pxa3xx()) + val |= SSACD_SCDX8; + else + return -EINVAL; + break; +#endif + default: + return -EINVAL; + } + pxa_ssp_write_reg(ssp, SSACD, val); + break; + case PXA_SSP_DIV_SCR: + pxa_ssp_set_scr(ssp, div); + break; + default: + return -ENODEV; + } + + return 0; +} + +/* + * Configure the PLL frequency pxa27x and (afaik - pxa320 only) + */ +static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, + int source, unsigned int freq_in, unsigned int freq_out) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70; + +#if defined(CONFIG_PXA3xx) + if (cpu_is_pxa3xx()) + pxa_ssp_write_reg(ssp, SSACDD, 0); +#endif + + switch (freq_out) { + case 5622000: + break; + case 11345000: + ssacd |= (0x1 << 4); + break; + case 12235000: + ssacd |= (0x2 << 4); + break; + case 14857000: + ssacd |= (0x3 << 4); + break; + case 32842000: + ssacd |= (0x4 << 4); + break; + case 48000000: + ssacd |= (0x5 << 4); + break; + case 0: + /* Disable */ + break; + + default: +#ifdef CONFIG_PXA3xx + /* PXA3xx has a clock ditherer which can be used to generate + * a wider range of frequencies - calculate a value for it. + */ + if (cpu_is_pxa3xx()) { + u32 val; + u64 tmp = 19968; + tmp *= 1000000; + do_div(tmp, freq_out); + val = tmp; + + val = (val << 16) | 64; + pxa_ssp_write_reg(ssp, SSACDD, val); + + ssacd |= (0x6 << 4); + + dev_dbg(&ssp->pdev->dev, + "Using SSACDD %x to supply %uHz\n", + val, freq_out); + break; + } +#endif + + return -EINVAL; + } + + pxa_ssp_write_reg(ssp, SSACD, ssacd); + + return 0; +} + +/* + * Set the active slots in TDM/Network mode + */ +static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, + unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + u32 sscr0; + + sscr0 = pxa_ssp_read_reg(ssp, SSCR0); + sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS); + + /* set slot width */ + if (slot_width > 16) + sscr0 |= SSCR0_EDSS | SSCR0_DataSize(slot_width - 16); + else + sscr0 |= SSCR0_DataSize(slot_width); + + if (slots > 1) { + /* enable network mode */ + sscr0 |= SSCR0_MOD; + + /* set number of active slots */ + sscr0 |= SSCR0_SlotsPerFrm(slots); + + /* set active slot mask */ + pxa_ssp_write_reg(ssp, SSTSA, tx_mask); + pxa_ssp_write_reg(ssp, SSRSA, rx_mask); + } + pxa_ssp_write_reg(ssp, SSCR0, sscr0); + + return 0; +} + +/* + * Tristate the SSP DAI lines + */ +static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai, + int tristate) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + u32 sscr1; + + sscr1 = pxa_ssp_read_reg(ssp, SSCR1); + if (tristate) + sscr1 &= ~SSCR1_TTE; + else + sscr1 |= SSCR1_TTE; + pxa_ssp_write_reg(ssp, SSCR1, sscr1); + + return 0; +} + +/* + * Set up the SSP DAI format. + * The SSP Port must be inactive before calling this function as the + * physical interface format is changed. + */ +static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + u32 sscr0, sscr1, sspsp, scfr; + + /* check if we need to change anything at all */ + if (priv->dai_fmt == fmt) + return 0; + + /* we can only change the settings if the port is not in use */ + if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { + dev_err(&ssp->pdev->dev, + "can't change hardware dai format: stream is in use"); + return -EINVAL; + } + + /* reset port settings */ + sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & + ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); + sscr1 = SSCR1_RxTresh(8) | SSCR1_TxTresh(7); + sspsp = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR; + break; + case SND_SOC_DAIFMT_CBM_CFS: + sscr1 |= SSCR1_SCLKDIR | SSCR1_SCFR; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + sspsp |= SSPSP_SFRMP; + break; + case SND_SOC_DAIFMT_NB_IF: + break; + case SND_SOC_DAIFMT_IB_IF: + sspsp |= SSPSP_SCMODE(2); + break; + case SND_SOC_DAIFMT_IB_NF: + sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + sscr0 |= SSCR0_PSP; + sscr1 |= SSCR1_RWOT | SSCR1_TRAIL; + /* See hw_params() */ + break; + + case SND_SOC_DAIFMT_DSP_A: + sspsp |= SSPSP_FSRT; + case SND_SOC_DAIFMT_DSP_B: + sscr0 |= SSCR0_MOD | SSCR0_PSP; + sscr1 |= SSCR1_TRAIL | SSCR1_RWOT; + break; + + default: + return -EINVAL; + } + + pxa_ssp_write_reg(ssp, SSCR0, sscr0); + pxa_ssp_write_reg(ssp, SSCR1, sscr1); + pxa_ssp_write_reg(ssp, SSPSP, sspsp); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + scfr = pxa_ssp_read_reg(ssp, SSCR1) | SSCR1_SCFR; + pxa_ssp_write_reg(ssp, SSCR1, scfr); + + while (pxa_ssp_read_reg(ssp, SSSR) & SSSR_BSY) + cpu_relax(); + break; + } + + dump_registers(ssp); + + /* Since we are configuring the timings for the format by hand + * we have to defer some things until hw_params() where we + * know parameters like the sample size. + */ + priv->dai_fmt = fmt; + + return 0; +} + +/* + * Set the SSP audio DMA parameters and sample size. + * Can be called multiple times by oss emulation. + */ +static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + int chn = params_channels(params); + u32 sscr0; + u32 sspsp; + int width = snd_pcm_format_physical_width(params_format(params)); + int ttsa = pxa_ssp_read_reg(ssp, SSTSA) & 0xf; + struct pxa2xx_pcm_dma_params *dma_data; + + dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); + + /* generate correct DMA params */ + kfree(dma_data); + + /* Network mode with one active slot (ttsa == 1) can be used + * to force 16-bit frame width on the wire (for S16_LE), even + * with two channels. Use 16-bit DMA transfers for this case. + */ + dma_data = pxa_ssp_get_dma_params(ssp, + ((chn == 2) && (ttsa != 1)) || (width == 32), + substream->stream == SNDRV_PCM_STREAM_PLAYBACK); + + snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data); + + /* we can only change the settings if the port is not in use */ + if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) + return 0; + + /* clear selected SSP bits */ + sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS); + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: +#ifdef CONFIG_PXA3xx + if (cpu_is_pxa3xx()) + sscr0 |= SSCR0_FPCKE; +#endif + sscr0 |= SSCR0_DataSize(16); + break; + case SNDRV_PCM_FORMAT_S24_LE: + sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8)); + break; + case SNDRV_PCM_FORMAT_S32_LE: + sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16)); + break; + } + pxa_ssp_write_reg(ssp, SSCR0, sscr0); + + switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + sspsp = pxa_ssp_read_reg(ssp, SSPSP); + + if ((pxa_ssp_get_scr(ssp) == 4) && (width == 16)) { + /* This is a special case where the bitclk is 64fs + * and we're not dealing with 2*32 bits of audio + * samples. + * + * The SSP values used for that are all found out by + * trying and failing a lot; some of the registers + * needed for that mode are only available on PXA3xx. + */ + +#ifdef CONFIG_PXA3xx + if (!cpu_is_pxa3xx()) + return -EINVAL; + + sspsp |= SSPSP_SFRMWDTH(width * 2); + sspsp |= SSPSP_SFRMDLY(width * 4); + sspsp |= SSPSP_EDMYSTOP(3); + sspsp |= SSPSP_DMYSTOP(3); + sspsp |= SSPSP_DMYSTRT(1); +#else + return -EINVAL; +#endif + } else { + /* The frame width is the width the LRCLK is + * asserted for; the delay is expressed in + * half cycle units. We need the extra cycle + * because the data starts clocking out one BCLK + * after LRCLK changes polarity. + */ + sspsp |= SSPSP_SFRMWDTH(width + 1); + sspsp |= SSPSP_SFRMDLY((width + 1) * 2); + sspsp |= SSPSP_DMYSTRT(1); + } + + pxa_ssp_write_reg(ssp, SSPSP, sspsp); + break; + default: + break; + } + + /* When we use a network mode, we always require TDM slots + * - complain loudly and fail if they've not been set up yet. + */ + if ((sscr0 & SSCR0_MOD) && !ttsa) { + dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n"); + return -EINVAL; + } + + dump_registers(ssp); + + return 0; +} + +static void pxa_ssp_set_running_bit(struct snd_pcm_substream *substream, + struct ssp_device *ssp, int value) +{ + uint32_t sscr0 = pxa_ssp_read_reg(ssp, SSCR0); + uint32_t sscr1 = pxa_ssp_read_reg(ssp, SSCR1); + uint32_t sspsp = pxa_ssp_read_reg(ssp, SSPSP); + uint32_t sssr = pxa_ssp_read_reg(ssp, SSSR); + + if (value && (sscr0 & SSCR0_SSE)) + pxa_ssp_write_reg(ssp, SSCR0, sscr0 & ~SSCR0_SSE); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + if (value) + sscr1 |= SSCR1_TSRE; + else + sscr1 &= ~SSCR1_TSRE; + } else { + if (value) + sscr1 |= SSCR1_RSRE; + else + sscr1 &= ~SSCR1_RSRE; + } + + pxa_ssp_write_reg(ssp, SSCR1, sscr1); + + if (value) { + pxa_ssp_write_reg(ssp, SSSR, sssr); + pxa_ssp_write_reg(ssp, SSPSP, sspsp); + pxa_ssp_write_reg(ssp, SSCR0, sscr0 | SSCR0_SSE); + } +} + +static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *cpu_dai) +{ + int ret = 0; + struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); + struct ssp_device *ssp = priv->ssp; + int val; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_RESUME: + pxa_ssp_enable(ssp); + break; + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + pxa_ssp_set_running_bit(substream, ssp, 1); + val = pxa_ssp_read_reg(ssp, SSSR); + pxa_ssp_write_reg(ssp, SSSR, val); + break; + case SNDRV_PCM_TRIGGER_START: + pxa_ssp_set_running_bit(substream, ssp, 1); + break; + case SNDRV_PCM_TRIGGER_STOP: + pxa_ssp_set_running_bit(substream, ssp, 0); + break; + case SNDRV_PCM_TRIGGER_SUSPEND: + pxa_ssp_disable(ssp); + break; + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + pxa_ssp_set_running_bit(substream, ssp, 0); + break; + + default: + ret = -EINVAL; + } + + dump_registers(ssp); + + return ret; +} + +static int pxa_ssp_probe(struct snd_soc_dai *dai) +{ + struct ssp_priv *priv; + int ret; + + priv = kzalloc(sizeof(struct ssp_priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->ssp = pxa_ssp_request(dai->id + 1, "SoC audio"); + if (priv->ssp == NULL) { + ret = -ENODEV; + goto err_priv; + } + + priv->dai_fmt = (unsigned int) -1; + snd_soc_dai_set_drvdata(dai, priv); + + return 0; + +err_priv: + kfree(priv); + return ret; +} + +static int pxa_ssp_remove(struct snd_soc_dai *dai) +{ + struct ssp_priv *priv = snd_soc_dai_get_drvdata(dai); + + pxa_ssp_free(priv->ssp); + kfree(priv); + return 0; +} + +#define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \ + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) + +#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +static const struct snd_soc_dai_ops pxa_ssp_dai_ops = { + .startup = pxa_ssp_startup, + .shutdown = pxa_ssp_shutdown, + .trigger = pxa_ssp_trigger, + .hw_params = pxa_ssp_hw_params, + .set_sysclk = pxa_ssp_set_dai_sysclk, + .set_clkdiv = pxa_ssp_set_dai_clkdiv, + .set_pll = pxa_ssp_set_dai_pll, + .set_fmt = pxa_ssp_set_dai_fmt, + .set_tdm_slot = pxa_ssp_set_dai_tdm_slot, + .set_tristate = pxa_ssp_set_dai_tristate, +}; + +static struct snd_soc_dai_driver pxa_ssp_dai = { + .probe = pxa_ssp_probe, + .remove = pxa_ssp_remove, + .suspend = pxa_ssp_suspend, + .resume = pxa_ssp_resume, + .playback = { + .channels_min = 1, + .channels_max = 8, + .rates = PXA_SSP_RATES, + .formats = PXA_SSP_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 8, + .rates = PXA_SSP_RATES, + .formats = PXA_SSP_FORMATS, + }, + .ops = &pxa_ssp_dai_ops, +}; + +static __devinit int asoc_ssp_probe(struct platform_device *pdev) +{ + return snd_soc_register_dai(&pdev->dev, &pxa_ssp_dai); +} + +static int __devexit asoc_ssp_remove(struct platform_device *pdev) +{ + snd_soc_unregister_dai(&pdev->dev); + return 0; +} + +static struct platform_driver asoc_ssp_driver = { + .driver = { + .name = "pxa-ssp-dai", + .owner = THIS_MODULE, + }, + + .probe = asoc_ssp_probe, + .remove = __devexit_p(asoc_ssp_remove), +}; + +module_platform_driver(asoc_ssp_driver); + +/* Module information */ +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface"); +MODULE_LICENSE("GPL"); |