diff options
Diffstat (limited to 'sound/pci/echoaudio/darla24_dsp.c')
| -rw-r--r-- | sound/pci/echoaudio/darla24_dsp.c | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/sound/pci/echoaudio/darla24_dsp.c b/sound/pci/echoaudio/darla24_dsp.c new file mode 100644 index 00000000..6da6663e --- /dev/null +++ b/sound/pci/echoaudio/darla24_dsp.c @@ -0,0 +1,162 @@ +/*************************************************************************** + + Copyright Echo Digital Audio Corporation (c) 1998 - 2004 + All rights reserved + www.echoaudio.com + + This file is part of Echo Digital Audio's generic driver library. + + Echo Digital Audio's generic driver library is free software; + you can redistribute it and/or modify it under the terms of + the GNU General Public License as published by the Free Software + Foundation. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, Boston, + MA 02111-1307, USA. + + ************************************************************************* + + Translation from C++ and adaptation for use in ALSA-Driver + were made by Giuliano Pochini <pochini@shiny.it> + +****************************************************************************/ + + +static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id) +{ + int err; + + DE_INIT(("init_hw() - Darla24\n")); + if (snd_BUG_ON((subdevice_id & 0xfff0) != DARLA24)) + return -ENODEV; + + if ((err = init_dsp_comm_page(chip))) { + DE_INIT(("init_hw - could not initialize DSP comm page\n")); + return err; + } + + chip->device_id = device_id; + chip->subdevice_id = subdevice_id; + chip->bad_board = TRUE; + chip->dsp_code_to_load = FW_DARLA24_DSP; + /* Since this card has no ASIC, mark it as loaded so everything + works OK */ + chip->asic_loaded = TRUE; + chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL | + ECHO_CLOCK_BIT_ESYNC; + + if ((err = load_firmware(chip)) < 0) + return err; + chip->bad_board = FALSE; + + DE_INIT(("init_hw done\n")); + return err; +} + + + +static int set_mixer_defaults(struct echoaudio *chip) +{ + return init_line_levels(chip); +} + + + +static u32 detect_input_clocks(const struct echoaudio *chip) +{ + u32 clocks_from_dsp, clock_bits; + + /* Map the DSP clock detect bits to the generic driver clock + detect bits */ + clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); + + clock_bits = ECHO_CLOCK_BIT_INTERNAL; + + if (clocks_from_dsp & GLDM_CLOCK_DETECT_BIT_ESYNC) + clock_bits |= ECHO_CLOCK_BIT_ESYNC; + + return clock_bits; +} + + + +/* The Darla24 has no ASIC. Just do nothing */ +static int load_asic(struct echoaudio *chip) +{ + return 0; +} + + + +static int set_sample_rate(struct echoaudio *chip, u32 rate) +{ + u8 clock; + + switch (rate) { + case 96000: + clock = GD24_96000; + break; + case 88200: + clock = GD24_88200; + break; + case 48000: + clock = GD24_48000; + break; + case 44100: + clock = GD24_44100; + break; + case 32000: + clock = GD24_32000; + break; + case 22050: + clock = GD24_22050; + break; + case 16000: + clock = GD24_16000; + break; + case 11025: + clock = GD24_11025; + break; + case 8000: + clock = GD24_8000; + break; + default: + DE_ACT(("set_sample_rate: Error, invalid sample rate %d\n", + rate)); + return -EINVAL; + } + + if (wait_handshake(chip)) + return -EIO; + + DE_ACT(("set_sample_rate: %d clock %d\n", rate, clock)); + chip->sample_rate = rate; + + /* Override the sample rate if this card is set to Echo sync. */ + if (chip->input_clock == ECHO_CLOCK_ESYNC) + clock = GD24_EXT_SYNC; + + chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP ? */ + chip->comm_page->gd_clock_state = clock; + clear_handshake(chip); + return send_vector(chip, DSP_VC_SET_GD_AUDIO_STATE); +} + + + +static int set_input_clock(struct echoaudio *chip, u16 clock) +{ + if (snd_BUG_ON(clock != ECHO_CLOCK_INTERNAL && + clock != ECHO_CLOCK_ESYNC)) + return -EINVAL; + chip->input_clock = clock; + return set_sample_rate(chip, chip->sample_rate); +} + |