diff options
Diffstat (limited to 'drivers/pci/hotplug/ibmphp_core.c')
| -rw-r--r-- | drivers/pci/hotplug/ibmphp_core.c | 1373 |
1 files changed, 1373 insertions, 0 deletions
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c new file mode 100644 index 00000000..4fda7e6a --- /dev/null +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -0,0 +1,1373 @@ +/* + * IBM Hot Plug Controller Driver + * + * Written By: Chuck Cole, Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation + * + * Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2001-2003 IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to <gregkh@us.ibm.com> + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/wait.h> +#include "../pci.h" +#include <asm/pci_x86.h> /* for struct irq_routing_table */ +#include "ibmphp.h" + +#define attn_on(sl) ibmphp_hpc_writeslot (sl, HPC_SLOT_ATTNON) +#define attn_off(sl) ibmphp_hpc_writeslot (sl, HPC_SLOT_ATTNOFF) +#define attn_LED_blink(sl) ibmphp_hpc_writeslot (sl, HPC_SLOT_BLINKLED) +#define get_ctrl_revision(sl, rev) ibmphp_hpc_readslot (sl, READ_REVLEVEL, rev) +#define get_hpc_options(sl, opt) ibmphp_hpc_readslot (sl, READ_HPCOPTIONS, opt) + +#define DRIVER_VERSION "0.6" +#define DRIVER_DESC "IBM Hot Plug PCI Controller Driver" + +int ibmphp_debug; + +static bool debug; +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC (debug, "Debugging mode enabled or not"); +MODULE_LICENSE ("GPL"); +MODULE_DESCRIPTION (DRIVER_DESC); + +struct pci_bus *ibmphp_pci_bus; +static int max_slots; + +static int irqs[16]; /* PIC mode IRQ's we're using so far (in case MPS + * tables don't provide default info for empty slots */ + +static int init_flag; + +/* +static int get_max_adapter_speed_1 (struct hotplug_slot *, u8 *, u8); + +static inline int get_max_adapter_speed (struct hotplug_slot *hs, u8 *value) +{ + return get_max_adapter_speed_1 (hs, value, 1); +} +*/ +static inline int get_cur_bus_info(struct slot **sl) +{ + int rc = 1; + struct slot * slot_cur = *sl; + + debug("options = %x\n", slot_cur->ctrl->options); + debug("revision = %x\n", slot_cur->ctrl->revision); + + if (READ_BUS_STATUS(slot_cur->ctrl)) + rc = ibmphp_hpc_readslot(slot_cur, READ_BUSSTATUS, NULL); + + if (rc) + return rc; + + slot_cur->bus_on->current_speed = CURRENT_BUS_SPEED(slot_cur->busstatus); + if (READ_BUS_MODE(slot_cur->ctrl)) + slot_cur->bus_on->current_bus_mode = + CURRENT_BUS_MODE(slot_cur->busstatus); + else + slot_cur->bus_on->current_bus_mode = 0xFF; + + debug("busstatus = %x, bus_speed = %x, bus_mode = %x\n", + slot_cur->busstatus, + slot_cur->bus_on->current_speed, + slot_cur->bus_on->current_bus_mode); + + *sl = slot_cur; + return 0; +} + +static inline int slot_update(struct slot **sl) +{ + int rc; + rc = ibmphp_hpc_readslot(*sl, READ_ALLSTAT, NULL); + if (rc) + return rc; + if (!init_flag) + rc = get_cur_bus_info(sl); + return rc; +} + +static int __init get_max_slots (void) +{ + struct slot * slot_cur; + struct list_head * tmp; + u8 slot_count = 0; + + list_for_each(tmp, &ibmphp_slot_head) { + slot_cur = list_entry(tmp, struct slot, ibm_slot_list); + /* sometimes the hot-pluggable slots start with 4 (not always from 1) */ + slot_count = max(slot_count, slot_cur->number); + } + return slot_count; +} + +/* This routine will put the correct slot->device information per slot. It's + * called from initialization of the slot structures. It will also assign + * interrupt numbers per each slot. + * Parameters: struct slot + * Returns 0 or errors + */ +int ibmphp_init_devno(struct slot **cur_slot) +{ + struct irq_routing_table *rtable; + int len; + int loop; + int i; + + rtable = pcibios_get_irq_routing_table(); + if (!rtable) { + err("no BIOS routing table...\n"); + return -ENOMEM; + } + + len = (rtable->size - sizeof(struct irq_routing_table)) / + sizeof(struct irq_info); + + if (!len) { + kfree(rtable); + return -1; + } + for (loop = 0; loop < len; loop++) { + if ((*cur_slot)->number == rtable->slots[loop].slot && + (*cur_slot)->bus == rtable->slots[loop].bus) { + struct io_apic_irq_attr irq_attr; + + (*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn); + for (i = 0; i < 4; i++) + (*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus, + (int) (*cur_slot)->device, i, + &irq_attr); + + debug("(*cur_slot)->irq[0] = %x\n", + (*cur_slot)->irq[0]); + debug("(*cur_slot)->irq[1] = %x\n", + (*cur_slot)->irq[1]); + debug("(*cur_slot)->irq[2] = %x\n", + (*cur_slot)->irq[2]); + debug("(*cur_slot)->irq[3] = %x\n", + (*cur_slot)->irq[3]); + + debug("rtable->exlusive_irqs = %x\n", + rtable->exclusive_irqs); + debug("rtable->slots[loop].irq[0].bitmap = %x\n", + rtable->slots[loop].irq[0].bitmap); + debug("rtable->slots[loop].irq[1].bitmap = %x\n", + rtable->slots[loop].irq[1].bitmap); + debug("rtable->slots[loop].irq[2].bitmap = %x\n", + rtable->slots[loop].irq[2].bitmap); + debug("rtable->slots[loop].irq[3].bitmap = %x\n", + rtable->slots[loop].irq[3].bitmap); + + debug("rtable->slots[loop].irq[0].link = %x\n", + rtable->slots[loop].irq[0].link); + debug("rtable->slots[loop].irq[1].link = %x\n", + rtable->slots[loop].irq[1].link); + debug("rtable->slots[loop].irq[2].link = %x\n", + rtable->slots[loop].irq[2].link); + debug("rtable->slots[loop].irq[3].link = %x\n", + rtable->slots[loop].irq[3].link); + debug("end of init_devno\n"); + kfree(rtable); + return 0; + } + } + + kfree(rtable); + return -1; +} + +static inline int power_on(struct slot *slot_cur) +{ + u8 cmd = HPC_SLOT_ON; + int retval; + + retval = ibmphp_hpc_writeslot(slot_cur, cmd); + if (retval) { + err("power on failed\n"); + return retval; + } + if (CTLR_RESULT(slot_cur->ctrl->status)) { + err("command not completed successfully in power_on\n"); + return -EIO; + } + msleep(3000); /* For ServeRAID cards, and some 66 PCI */ + return 0; +} + +static inline int power_off(struct slot *slot_cur) +{ + u8 cmd = HPC_SLOT_OFF; + int retval; + + retval = ibmphp_hpc_writeslot(slot_cur, cmd); + if (retval) { + err("power off failed\n"); + return retval; + } + if (CTLR_RESULT(slot_cur->ctrl->status)) { + err("command not completed successfully in power_off\n"); + retval = -EIO; + } + return retval; +} + +static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value) +{ + int rc = 0; + struct slot *pslot; + u8 cmd = 0x00; /* avoid compiler warning */ + + debug("set_attention_status - Entry hotplug_slot[%lx] value[%x]\n", + (ulong) hotplug_slot, value); + ibmphp_lock_operations(); + + + if (hotplug_slot) { + switch (value) { + case HPC_SLOT_ATTN_OFF: + cmd = HPC_SLOT_ATTNOFF; + break; + case HPC_SLOT_ATTN_ON: + cmd = HPC_SLOT_ATTNON; + break; + case HPC_SLOT_ATTN_BLINK: + cmd = HPC_SLOT_BLINKLED; + break; + default: + rc = -ENODEV; + err("set_attention_status - Error : invalid input [%x]\n", + value); + break; + } + if (rc == 0) { + pslot = hotplug_slot->private; + if (pslot) + rc = ibmphp_hpc_writeslot(pslot, cmd); + else + rc = -ENODEV; + } + } else + rc = -ENODEV; + + ibmphp_unlock_operations(); + + debug("set_attention_status - Exit rc[%d]\n", rc); + return rc; +} + +static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 * value) +{ + int rc = -ENODEV; + struct slot *pslot; + struct slot myslot; + + debug("get_attention_status - Entry hotplug_slot[%lx] pvalue[%lx]\n", + (ulong) hotplug_slot, (ulong) value); + + ibmphp_lock_operations(); + if (hotplug_slot) { + pslot = hotplug_slot->private; + if (pslot) { + memcpy(&myslot, pslot, sizeof(struct slot)); + rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, + &(myslot.status)); + if (!rc) + rc = ibmphp_hpc_readslot(pslot, + READ_EXTSLOTSTATUS, + &(myslot.ext_status)); + if (!rc) + *value = SLOT_ATTN(myslot.status, + myslot.ext_status); + } + } + + ibmphp_unlock_operations(); + debug("get_attention_status - Exit rc[%d] value[%x]\n", rc, *value); + return rc; +} + +static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 * value) +{ + int rc = -ENODEV; + struct slot *pslot; + struct slot myslot; + + debug("get_latch_status - Entry hotplug_slot[%lx] pvalue[%lx]\n", + (ulong) hotplug_slot, (ulong) value); + ibmphp_lock_operations(); + if (hotplug_slot) { + pslot = hotplug_slot->private; + if (pslot) { + memcpy(&myslot, pslot, sizeof(struct slot)); + rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, + &(myslot.status)); + if (!rc) + *value = SLOT_LATCH(myslot.status); + } + } + + ibmphp_unlock_operations(); + debug("get_latch_status - Exit rc[%d] rc[%x] value[%x]\n", + rc, rc, *value); + return rc; +} + + +static int get_power_status(struct hotplug_slot *hotplug_slot, u8 * value) +{ + int rc = -ENODEV; + struct slot *pslot; + struct slot myslot; + + debug("get_power_status - Entry hotplug_slot[%lx] pvalue[%lx]\n", + (ulong) hotplug_slot, (ulong) value); + ibmphp_lock_operations(); + if (hotplug_slot) { + pslot = hotplug_slot->private; + if (pslot) { + memcpy(&myslot, pslot, sizeof(struct slot)); + rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, + &(myslot.status)); + if (!rc) + *value = SLOT_PWRGD(myslot.status); + } + } + + ibmphp_unlock_operations(); + debug("get_power_status - Exit rc[%d] rc[%x] value[%x]\n", + rc, rc, *value); + return rc; +} + +static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 * value) +{ + int rc = -ENODEV; + struct slot *pslot; + u8 present; + struct slot myslot; + + debug("get_adapter_status - Entry hotplug_slot[%lx] pvalue[%lx]\n", + (ulong) hotplug_slot, (ulong) value); + ibmphp_lock_operations(); + if (hotplug_slot) { + pslot = hotplug_slot->private; + if (pslot) { + memcpy(&myslot, pslot, sizeof(struct slot)); + rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, + &(myslot.status)); + if (!rc) { + present = SLOT_PRESENT(myslot.status); + if (present == HPC_SLOT_EMPTY) + *value = 0; + else + *value = 1; + } + } + } + + ibmphp_unlock_operations(); + debug("get_adapter_present - Exit rc[%d] value[%x]\n", rc, *value); + return rc; +} + +static int get_max_bus_speed(struct slot *slot) +{ + int rc; + u8 mode = 0; + enum pci_bus_speed speed; + struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus; + + debug("%s - Entry slot[%p]\n", __func__, slot); + + ibmphp_lock_operations(); + mode = slot->supported_bus_mode; + speed = slot->supported_speed; + ibmphp_unlock_operations(); + + switch (speed) { + case BUS_SPEED_33: + break; + case BUS_SPEED_66: + if (mode == BUS_MODE_PCIX) + speed += 0x01; + break; + case BUS_SPEED_100: + case BUS_SPEED_133: + speed += 0x01; + break; + default: + /* Note (will need to change): there would be soon 256, 512 also */ + rc = -ENODEV; + } + + if (!rc) + bus->max_bus_speed = speed; + + debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed); + return rc; +} + +/* +static int get_max_adapter_speed_1(struct hotplug_slot *hotplug_slot, u8 * value, u8 flag) +{ + int rc = -ENODEV; + struct slot *pslot; + struct slot myslot; + + debug("get_max_adapter_speed_1 - Entry hotplug_slot[%lx] pvalue[%lx]\n", + (ulong)hotplug_slot, (ulong) value); + + if (flag) + ibmphp_lock_operations(); + + if (hotplug_slot && value) { + pslot = hotplug_slot->private; + if (pslot) { + memcpy(&myslot, pslot, sizeof(struct slot)); + rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, + &(myslot.status)); + + if (!(SLOT_LATCH (myslot.status)) && + (SLOT_PRESENT (myslot.status))) { + rc = ibmphp_hpc_readslot(pslot, + READ_EXTSLOTSTATUS, + &(myslot.ext_status)); + if (!rc) + *value = SLOT_SPEED(myslot.ext_status); + } else + *value = MAX_ADAPTER_NONE; + } + } + + if (flag) + ibmphp_unlock_operations(); + + debug("get_max_adapter_speed_1 - Exit rc[%d] value[%x]\n", rc, *value); + return rc; +} + +static int get_bus_name(struct hotplug_slot *hotplug_slot, char * value) +{ + int rc = -ENODEV; + struct slot *pslot = NULL; + + debug("get_bus_name - Entry hotplug_slot[%lx]\n", (ulong)hotplug_slot); + + ibmphp_lock_operations(); + + if (hotplug_slot) { + pslot = hotplug_slot->private; + if (pslot) { + rc = 0; + snprintf(value, 100, "Bus %x", pslot->bus); + } + } else + rc = -ENODEV; + + ibmphp_unlock_operations(); + debug("get_bus_name - Exit rc[%d] value[%x]\n", rc, *value); + return rc; +} +*/ + +/**************************************************************************** + * This routine will initialize the ops data structure used in the validate + * function. It will also power off empty slots that are powered on since BIOS + * leaves those on, albeit disconnected + ****************************************************************************/ +static int __init init_ops(void) +{ + struct slot *slot_cur; + struct list_head *tmp; + int retval; + int rc; + + list_for_each(tmp, &ibmphp_slot_head) { + slot_cur = list_entry(tmp, struct slot, ibm_slot_list); + + if (!slot_cur) + return -ENODEV; + + debug("BEFORE GETTING SLOT STATUS, slot # %x\n", + slot_cur->number); + if (slot_cur->ctrl->revision == 0xFF) + if (get_ctrl_revision(slot_cur, + &slot_cur->ctrl->revision)) + return -1; + + if (slot_cur->bus_on->current_speed == 0xFF) + if (get_cur_bus_info(&slot_cur)) + return -1; + get_max_bus_speed(slot_cur); + + if (slot_cur->ctrl->options == 0xFF) + if (get_hpc_options(slot_cur, &slot_cur->ctrl->options)) + return -1; + + retval = slot_update(&slot_cur); + if (retval) + return retval; + + debug("status = %x\n", slot_cur->status); + debug("ext_status = %x\n", slot_cur->ext_status); + debug("SLOT_POWER = %x\n", SLOT_POWER(slot_cur->status)); + debug("SLOT_PRESENT = %x\n", SLOT_PRESENT(slot_cur->status)); + debug("SLOT_LATCH = %x\n", SLOT_LATCH(slot_cur->status)); + + if ((SLOT_PWRGD(slot_cur->status)) && + !(SLOT_PRESENT(slot_cur->status)) && + !(SLOT_LATCH(slot_cur->status))) { + debug("BEFORE POWER OFF COMMAND\n"); + rc = power_off(slot_cur); + if (rc) + return rc; + + /* retval = slot_update(&slot_cur); + * if (retval) + * return retval; + * ibmphp_update_slot_info(slot_cur); + */ + } + } + init_flag = 0; + return 0; +} + +/* This operation will check whether the slot is within the bounds and + * the operation is valid to perform on that slot + * Parameters: slot, operation + * Returns: 0 or error codes + */ +static int validate(struct slot *slot_cur, int opn) +{ + int number; + int retval; + + if (!slot_cur) + return -ENODEV; + number = slot_cur->number; + if ((number > max_slots) || (number < 0)) + return -EBADSLT; + debug("slot_number in validate is %d\n", slot_cur->number); + + retval = slot_update(&slot_cur); + if (retval) + return retval; + + switch (opn) { + case ENABLE: + if (!(SLOT_PWRGD(slot_cur->status)) && + (SLOT_PRESENT(slot_cur->status)) && + !(SLOT_LATCH(slot_cur->status))) + return 0; + break; + case DISABLE: + if ((SLOT_PWRGD(slot_cur->status)) && + (SLOT_PRESENT(slot_cur->status)) && + !(SLOT_LATCH(slot_cur->status))) + return 0; + break; + default: + break; + } + err("validate failed....\n"); + return -EINVAL; +} + +/**************************************************************************** + * This routine is for updating the data structures in the hotplug core + * Parameters: struct slot + * Returns: 0 or error + ****************************************************************************/ +int ibmphp_update_slot_info(struct slot *slot_cur) +{ + struct hotplug_slot_info *info; + struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus; + int rc; + u8 bus_speed; + u8 mode; + + info = kmalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL); + if (!info) { + err("out of system memory\n"); + return -ENOMEM; + } + + info->power_status = SLOT_PWRGD(slot_cur->status); + info->attention_status = SLOT_ATTN(slot_cur->status, + slot_cur->ext_status); + info->latch_status = SLOT_LATCH(slot_cur->status); + if (!SLOT_PRESENT(slot_cur->status)) { + info->adapter_status = 0; +/* info->max_adapter_speed_status = MAX_ADAPTER_NONE; */ + } else { + info->adapter_status = 1; +/* get_max_adapter_speed_1(slot_cur->hotplug_slot, + &info->max_adapter_speed_status, 0); */ + } + + bus_speed = slot_cur->bus_on->current_speed; + mode = slot_cur->bus_on->current_bus_mode; + + switch (bus_speed) { + case BUS_SPEED_33: + break; + case BUS_SPEED_66: + if (mode == BUS_MODE_PCIX) + bus_speed += 0x01; + else if (mode == BUS_MODE_PCI) + ; + else + bus_speed = PCI_SPEED_UNKNOWN; + break; + case BUS_SPEED_100: + case BUS_SPEED_133: + bus_speed += 0x01; + break; + default: + bus_speed = PCI_SPEED_UNKNOWN; + } + + bus->cur_bus_speed = bus_speed; + // To do: bus_names + + rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info); + kfree(info); + return rc; +} + + +/****************************************************************************** + * This function will return the pci_func, given bus and devfunc, or NULL. It + * is called from visit routines + ******************************************************************************/ + +static struct pci_func *ibm_slot_find(u8 busno, u8 device, u8 function) +{ + struct pci_func *func_cur; + struct slot *slot_cur; + struct list_head * tmp; + list_for_each(tmp, &ibmphp_slot_head) { + slot_cur = list_entry(tmp, struct slot, ibm_slot_list); + if (slot_cur->func) { + func_cur = slot_cur->func; + while (func_cur) { + if ((func_cur->busno == busno) && + (func_cur->device == device) && + (func_cur->function == function)) + return func_cur; + func_cur = func_cur->next; + } + } + } + return NULL; +} + +/************************************************************* + * This routine frees up memory used by struct slot, including + * the pointers to pci_func, bus, hotplug_slot, controller, + * and deregistering from the hotplug core + *************************************************************/ +static void free_slots(void) +{ + struct slot *slot_cur; + struct list_head * tmp; + struct list_head * next; + + debug("%s -- enter\n", __func__); + + list_for_each_safe(tmp, next, &ibmphp_slot_head) { + slot_cur = list_entry(tmp, struct slot, ibm_slot_list); + pci_hp_deregister(slot_cur->hotplug_slot); + } + debug("%s -- exit\n", __func__); +} + +static void ibm_unconfigure_device(struct pci_func *func) +{ + struct pci_dev *temp; + u8 j; + + debug("inside %s\n", __func__); + debug("func->device = %x, func->function = %x\n", + func->device, func->function); + debug("func->device << 3 | 0x0 = %x\n", func->device << 3 | 0x0); + + for (j = 0; j < 0x08; j++) { + temp = pci_get_bus_and_slot(func->busno, (func->device << 3) | j); + if (temp) { + pci_stop_and_remove_bus_device(temp); + pci_dev_put(temp); + } + } + pci_dev_put(func->dev); +} + +/* + * The following function is to fix kernel bug regarding + * getting bus entries, here we manually add those primary + * bus entries to kernel bus structure whenever apply + */ +static u8 bus_structure_fixup(u8 busno) +{ + struct pci_bus *bus; + struct pci_dev *dev; + u16 l; + + if (pci_find_bus(0, busno) || !(ibmphp_find_same_bus_num(busno))) + return 1; + + bus = kmalloc(sizeof(*bus), GFP_KERNEL); + if (!bus) { + err("%s - out of memory\n", __func__); + return 1; + } + dev = kmalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + kfree(bus); + err("%s - out of memory\n", __func__); + return 1; + } + + bus->number = busno; + bus->ops = ibmphp_pci_bus->ops; + dev->bus = bus; + for (dev->devfn = 0; dev->devfn < 256; dev->devfn += 8) { + if (!pci_read_config_word(dev, PCI_VENDOR_ID, &l) && + (l != 0x0000) && (l != 0xffff)) { + debug("%s - Inside bus_struture_fixup()\n", + __func__); + pci_scan_bus(busno, ibmphp_pci_bus->ops, NULL); + break; + } + } + + kfree(dev); + kfree(bus); + + return 0; +} + +static int ibm_configure_device(struct pci_func *func) +{ + unsigned char bus; + struct pci_bus *child; + int num; + int flag = 0; /* this is to make sure we don't double scan the bus, + for bridged devices primarily */ + + if (!(bus_structure_fixup(func->busno))) + flag = 1; + if (func->dev == NULL) + func->dev = pci_get_bus_and_slot(func->busno, + PCI_DEVFN(func->device, func->function)); + + if (func->dev == NULL) { + struct pci_bus *bus = pci_find_bus(0, func->busno); + if (!bus) + return 0; + + num = pci_scan_slot(bus, + PCI_DEVFN(func->device, func->function)); + if (num) + pci_bus_add_devices(bus); + + func->dev = pci_get_bus_and_slot(func->busno, + PCI_DEVFN(func->device, func->function)); + if (func->dev == NULL) { + err("ERROR... : pci_dev still NULL\n"); + return 0; + } + } + if (!(flag) && (func->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)) { + pci_read_config_byte(func->dev, PCI_SECONDARY_BUS, &bus); + child = pci_add_new_bus(func->dev->bus, func->dev, bus); + pci_do_scan_bus(child); + } + + return 0; +} + +/******************************************************* + * Returns whether the bus is empty or not + *******************************************************/ +static int is_bus_empty(struct slot * slot_cur) +{ + int rc; + struct slot * tmp_slot; + u8 i = slot_cur->bus_on->slot_min; + + while (i <= slot_cur->bus_on->slot_max) { + if (i == slot_cur->number) { + i++; + continue; + } + tmp_slot = ibmphp_get_slot_from_physical_num(i); + if (!tmp_slot) + return 0; + rc = slot_update(&tmp_slot); + if (rc) + return 0; + if (SLOT_PRESENT(tmp_slot->status) && + SLOT_PWRGD(tmp_slot->status)) + return 0; + i++; + } + return 1; +} + +/*********************************************************** + * If the HPC permits and the bus currently empty, tries to set the + * bus speed and mode at the maximum card and bus capability + * Parameters: slot + * Returns: bus is set (0) or error code + ***********************************************************/ +static int set_bus(struct slot * slot_cur) +{ + int rc; + u8 speed; + u8 cmd = 0x0; + int retval; + static struct pci_device_id ciobx[] = { + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 0x0101) }, + { }, + }; + + debug("%s - entry slot # %d\n", __func__, slot_cur->number); + if (SET_BUS_STATUS(slot_cur->ctrl) && is_bus_empty(slot_cur)) { + rc = slot_update(&slot_cur); + if (rc) + return rc; + speed = SLOT_SPEED(slot_cur->ext_status); + debug("ext_status = %x, speed = %x\n", slot_cur->ext_status, speed); + switch (speed) { + case HPC_SLOT_SPEED_33: + cmd = HPC_BUS_33CONVMODE; + break; + case HPC_SLOT_SPEED_66: + if (SLOT_PCIX(slot_cur->ext_status)) { + if ((slot_cur->supported_speed >= BUS_SPEED_66) && + (slot_cur->supported_bus_mode == BUS_MODE_PCIX)) + cmd = HPC_BUS_66PCIXMODE; + else if (!SLOT_BUS_MODE(slot_cur->ext_status)) + /* if max slot/bus capability is 66 pci + and there's no bus mode mismatch, then + the adapter supports 66 pci */ + cmd = HPC_BUS_66CONVMODE; + else + cmd = HPC_BUS_33CONVMODE; + } else { + if (slot_cur->supported_speed >= BUS_SPEED_66) + cmd = HPC_BUS_66CONVMODE; + else + cmd = HPC_BUS_33CONVMODE; + } + break; + case HPC_SLOT_SPEED_133: + switch (slot_cur->supported_speed) { + case BUS_SPEED_33: + cmd = HPC_BUS_33CONVMODE; + break; + case BUS_SPEED_66: + if (slot_cur->supported_bus_mode == BUS_MODE_PCIX) + cmd = HPC_BUS_66PCIXMODE; + else + cmd = HPC_BUS_66CONVMODE; + break; + case BUS_SPEED_100: + cmd = HPC_BUS_100PCIXMODE; + break; + case BUS_SPEED_133: + /* This is to take care of the bug in CIOBX chip */ + if (pci_dev_present(ciobx)) + ibmphp_hpc_writeslot(slot_cur, + HPC_BUS_100PCIXMODE); + cmd = HPC_BUS_133PCIXMODE; + break; + default: + err("Wrong bus speed\n"); + return -ENODEV; + } + break; + default: + err("wrong slot speed\n"); + return -ENODEV; + } + debug("setting bus speed for slot %d, cmd %x\n", + slot_cur->number, cmd); + retval = ibmphp_hpc_writeslot(slot_cur, cmd); + if (retval) { + err("setting bus speed failed\n"); + return retval; + } + if (CTLR_RESULT(slot_cur->ctrl->status)) { + err("command not completed successfully in set_bus\n"); + return -EIO; + } + } + /* This is for x440, once Brandon fixes the firmware, + will not need this delay */ + msleep(1000); + debug("%s -Exit\n", __func__); + return 0; +} + +/* This routine checks the bus limitations that the slot is on from the BIOS. + * This is used in deciding whether or not to power up the slot. + * (electrical/spec limitations. For example, >1 133 MHz or >2 66 PCI cards on + * same bus) + * Parameters: slot + * Returns: 0 = no limitations, -EINVAL = exceeded limitations on the bus + */ +static int check_limitations(struct slot *slot_cur) +{ + u8 i; + struct slot * tmp_slot; + u8 count = 0; + u8 limitation = 0; + + for (i = slot_cur->bus_on->slot_min; i <= slot_cur->bus_on->slot_max; i++) { + tmp_slot = ibmphp_get_slot_from_physical_num(i); + if (!tmp_slot) + return -ENODEV; + if ((SLOT_PWRGD(tmp_slot->status)) && + !(SLOT_CONNECT(tmp_slot->status))) + count++; + } + get_cur_bus_info(&slot_cur); + switch (slot_cur->bus_on->current_speed) { + case BUS_SPEED_33: + limitation = slot_cur->bus_on->slots_at_33_conv; + break; + case BUS_SPEED_66: + if (slot_cur->bus_on->current_bus_mode == BUS_MODE_PCIX) + limitation = slot_cur->bus_on->slots_at_66_pcix; + else + limitation = slot_cur->bus_on->slots_at_66_conv; + break; + case BUS_SPEED_100: + limitation = slot_cur->bus_on->slots_at_100_pcix; + break; + case BUS_SPEED_133: + limitation = slot_cur->bus_on->slots_at_133_pcix; + break; + } + + if ((count + 1) > limitation) + return -EINVAL; + return 0; +} + +static inline void print_card_capability(struct slot *slot_cur) +{ + info("capability of the card is "); + if ((slot_cur->ext_status & CARD_INFO) == PCIX133) + info(" 133 MHz PCI-X\n"); + else if ((slot_cur->ext_status & CARD_INFO) == PCIX66) + info(" 66 MHz PCI-X\n"); + else if ((slot_cur->ext_status & CARD_INFO) == PCI66) + info(" 66 MHz PCI\n"); + else + info(" 33 MHz PCI\n"); + +} + +/* This routine will power on the slot, configure the device(s) and find the + * drivers for them. + * Parameters: hotplug_slot + * Returns: 0 or failure codes + */ +static int enable_slot(struct hotplug_slot *hs) +{ + int rc, i, rcpr; + struct slot *slot_cur; + u8 function; + struct pci_func *tmp_func; + + ibmphp_lock_operations(); + + debug("ENABLING SLOT........\n"); + slot_cur = hs->private; + + if ((rc = validate(slot_cur, ENABLE))) { + err("validate function failed\n"); + goto error_nopower; + } + + attn_LED_blink(slot_cur); + + rc = set_bus(slot_cur); + if (rc) { + err("was not able to set the bus\n"); + goto error_nopower; + } + + /*-----------------debugging------------------------------*/ + get_cur_bus_info(&slot_cur); + debug("the current bus speed right after set_bus = %x\n", + slot_cur->bus_on->current_speed); + /*----------------------------------------------------------*/ + + rc = check_limitations(slot_cur); + if (rc) { + err("Adding this card exceeds the limitations of this bus.\n"); + err("(i.e., >1 133MHz cards running on same bus, or " + ">2 66 PCI cards running on same bus.\n"); + err("Try hot-adding into another bus\n"); + rc = -EINVAL; + goto error_nopower; + } + + rc = power_on(slot_cur); + + if (rc) { + err("something wrong when powering up... please see below for details\n"); + /* need to turn off before on, otherwise, blinking overwrites */ + attn_off(slot_cur); + attn_on(slot_cur); + if (slot_update(&slot_cur)) { + attn_off(slot_cur); + attn_on(slot_cur); + rc = -ENODEV; + goto exit; + } + /* Check to see the error of why it failed */ + if ((SLOT_POWER(slot_cur->status)) && + !(SLOT_PWRGD(slot_cur->status))) + err("power fault occurred trying to power up\n"); + else if (SLOT_BUS_SPEED(slot_cur->status)) { + err("bus speed mismatch occurred. please check " + "current bus speed and card capability\n"); + print_card_capability(slot_cur); + } else if (SLOT_BUS_MODE(slot_cur->ext_status)) { + err("bus mode mismatch occurred. please check " + "current bus mode and card capability\n"); + print_card_capability(slot_cur); + } + ibmphp_update_slot_info(slot_cur); + goto exit; + } + debug("after power_on\n"); + /*-----------------------debugging---------------------------*/ + get_cur_bus_info(&slot_cur); + debug("the current bus speed right after power_on = %x\n", + slot_cur->bus_on->current_speed); + /*----------------------------------------------------------*/ + + rc = slot_update(&slot_cur); + if (rc) + goto error_power; + + rc = -EINVAL; + if (SLOT_POWER(slot_cur->status) && !(SLOT_PWRGD(slot_cur->status))) { + err("power fault occurred trying to power up...\n"); + goto error_power; + } + if (SLOT_POWER(slot_cur->status) && (SLOT_BUS_SPEED(slot_cur->status))) { + err("bus speed mismatch occurred. please check current bus " + "speed and card capability\n"); + print_card_capability(slot_cur); + goto error_power; + } + /* Don't think this case will happen after above checks... + * but just in case, for paranoia sake */ + if (!(SLOT_POWER(slot_cur->status))) { + err("power on failed...\n"); + goto error_power; + } + + slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL); + if (!slot_cur->func) { + /* We cannot do update_slot_info here, since no memory for + * kmalloc n.e.ways, and update_slot_info allocates some */ + err("out of system memory\n"); + rc = -ENOMEM; + goto error_power; + } + slot_cur->func->busno = slot_cur->bus; + slot_cur->func->device = slot_cur->device; + for (i = 0; i < 4; i++) + slot_cur->func->irq[i] = slot_cur->irq[i]; + + debug("b4 configure_card, slot_cur->bus = %x, slot_cur->device = %x\n", + slot_cur->bus, slot_cur->device); + + if (ibmphp_configure_card(slot_cur->func, slot_cur->number)) { + err("configure_card was unsuccessful...\n"); + /* true because don't need to actually deallocate resources, + * just remove references */ + ibmphp_unconfigure_card(&slot_cur, 1); + debug("after unconfigure_card\n"); + slot_cur->func = NULL; + rc = -ENOMEM; + goto error_power; + } + + function = 0x00; + do { + tmp_func = ibm_slot_find(slot_cur->bus, slot_cur->func->device, + function++); + if (tmp_func && !(tmp_func->dev)) + ibm_configure_device(tmp_func); + } while (tmp_func); + + attn_off(slot_cur); + if (slot_update(&slot_cur)) { + rc = -EFAULT; + goto exit; + } + ibmphp_print_test(); + rc = ibmphp_update_slot_info(slot_cur); +exit: + ibmphp_unlock_operations(); + return rc; + +error_nopower: + attn_off(slot_cur); /* need to turn off if was blinking b4 */ + attn_on(slot_cur); +error_cont: + rcpr = slot_update(&slot_cur); + if (rcpr) { + rc = rcpr; + goto exit; + } + ibmphp_update_slot_info(slot_cur); + goto exit; + +error_power: + attn_off(slot_cur); /* need to turn off if was blinking b4 */ + attn_on(slot_cur); + rcpr = power_off(slot_cur); + if (rcpr) { + rc = rcpr; + goto exit; + } + goto error_cont; +} + +/************************************************************** +* HOT REMOVING ADAPTER CARD * +* INPUT: POINTER TO THE HOTPLUG SLOT STRUCTURE * +* OUTPUT: SUCCESS 0 ; FAILURE: UNCONFIGURE , VALIDATE * + DISABLE POWER , * +**************************************************************/ +static int ibmphp_disable_slot(struct hotplug_slot *hotplug_slot) +{ + struct slot *slot = hotplug_slot->private; + int rc; + + ibmphp_lock_operations(); + rc = ibmphp_do_disable_slot(slot); + ibmphp_unlock_operations(); + return rc; +} + +int ibmphp_do_disable_slot(struct slot *slot_cur) +{ + int rc; + u8 flag; + + debug("DISABLING SLOT...\n"); + + if ((slot_cur == NULL) || (slot_cur->ctrl == NULL)) { + return -ENODEV; + } + + flag = slot_cur->flag; + slot_cur->flag = 1; + + if (flag == 1) { + rc = validate(slot_cur, DISABLE); + /* checking if powered off already & valid slot # */ + if (rc) + goto error; + } + attn_LED_blink(slot_cur); + + if (slot_cur->func == NULL) { + /* We need this for fncs's that were there on bootup */ + slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL); + if (!slot_cur->func) { + err("out of system memory\n"); + rc = -ENOMEM; + goto error; + } + slot_cur->func->busno = slot_cur->bus; + slot_cur->func->device = slot_cur->device; + } + + ibm_unconfigure_device(slot_cur->func); + + /* If we got here from latch suddenly opening on operating card or + a power fault, there's no power to the card, so cannot + read from it to determine what resources it occupied. This operation + is forbidden anyhow. The best we can do is remove it from kernel + lists at least */ + + if (!flag) { + attn_off(slot_cur); + return 0; + } + + rc = ibmphp_unconfigure_card(&slot_cur, 0); + slot_cur->func = NULL; + debug("in disable_slot. after unconfigure_card\n"); + if (rc) { + err("could not unconfigure card.\n"); + goto error; + } + + rc = ibmphp_hpc_writeslot(slot_cur, HPC_SLOT_OFF); + if (rc) + goto error; + + attn_off(slot_cur); + rc = slot_update(&slot_cur); + if (rc) + goto exit; + + rc = ibmphp_update_slot_info(slot_cur); + ibmphp_print_test(); +exit: + return rc; + +error: + /* Need to turn off if was blinking b4 */ + attn_off(slot_cur); + attn_on(slot_cur); + if (slot_update(&slot_cur)) { + rc = -EFAULT; + goto exit; + } + if (flag) + ibmphp_update_slot_info(slot_cur); + goto exit; +} + +struct hotplug_slot_ops ibmphp_hotplug_slot_ops = { + .set_attention_status = set_attention_status, + .enable_slot = enable_slot, + .disable_slot = ibmphp_disable_slot, + .hardware_test = NULL, + .get_power_status = get_power_status, + .get_attention_status = get_attention_status, + .get_latch_status = get_latch_status, + .get_adapter_status = get_adapter_present, +/* .get_max_adapter_speed = get_max_adapter_speed, + .get_bus_name_status = get_bus_name, +*/ +}; + +static void ibmphp_unload(void) +{ + free_slots(); + debug("after slots\n"); + ibmphp_free_resources(); + debug("after resources\n"); + ibmphp_free_bus_info_queue(); + debug("after bus info\n"); + ibmphp_free_ebda_hpc_queue(); + debug("after ebda hpc\n"); + ibmphp_free_ebda_pci_rsrc_queue(); + debug("after ebda pci rsrc\n"); + kfree(ibmphp_pci_bus); +} + +static int __init ibmphp_init(void) +{ + struct pci_bus *bus; + int i = 0; + int rc = 0; + + init_flag = 1; + + info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); + + ibmphp_pci_bus = kmalloc(sizeof(*ibmphp_pci_bus), GFP_KERNEL); + if (!ibmphp_pci_bus) { + err("out of memory\n"); + rc = -ENOMEM; + goto exit; + } + + bus = pci_find_bus(0, 0); + if (!bus) { + err("Can't find the root pci bus, can not continue\n"); + rc = -ENODEV; + goto error; + } + memcpy(ibmphp_pci_bus, bus, sizeof(*ibmphp_pci_bus)); + + ibmphp_debug = debug; + + ibmphp_hpc_initvars(); + + for (i = 0; i < 16; i++) + irqs[i] = 0; + + if ((rc = ibmphp_access_ebda())) + goto error; + debug("after ibmphp_access_ebda()\n"); + + if ((rc = ibmphp_rsrc_init())) + goto error; + debug("AFTER Resource & EBDA INITIALIZATIONS\n"); + + max_slots = get_max_slots(); + + if ((rc = ibmphp_register_pci())) + goto error; + + if (init_ops()) { + rc = -ENODEV; + goto error; + } + + ibmphp_print_test(); + if ((rc = ibmphp_hpc_start_poll_thread())) { + goto error; + } + +exit: + return rc; + +error: + ibmphp_unload(); + goto exit; +} + +static void __exit ibmphp_exit(void) +{ + ibmphp_hpc_stop_poll_thread(); + debug("after polling\n"); + ibmphp_unload(); + debug("done\n"); +} + +module_init(ibmphp_init); +module_exit(ibmphp_exit); |