diff options
Diffstat (limited to 'drivers/pci/hotplug/cpqphp_pci.c')
| -rw-r--r-- | drivers/pci/hotplug/cpqphp_pci.c | 1559 |
1 files changed, 1559 insertions, 0 deletions
diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c new file mode 100644 index 00000000..1c849402 --- /dev/null +++ b/drivers/pci/hotplug/cpqphp_pci.c @@ -0,0 +1,1559 @@ +/* + * Compaq Hot Plug Controller Driver + * + * Copyright (C) 1995,2001 Compaq Computer Corporation + * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2001 IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to <greg@kroah.com> + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <linux/proc_fs.h> +#include <linux/pci.h> +#include <linux/pci_hotplug.h> +#include "../pci.h" +#include "cpqphp.h" +#include "cpqphp_nvram.h" + + +u8 cpqhp_nic_irq; +u8 cpqhp_disk_irq; + +static u16 unused_IRQ; + +/* + * detect_HRT_floating_pointer + * + * find the Hot Plug Resource Table in the specified region of memory. + * + */ +static void __iomem *detect_HRT_floating_pointer(void __iomem *begin, void __iomem *end) +{ + void __iomem *fp; + void __iomem *endp; + u8 temp1, temp2, temp3, temp4; + int status = 0; + + endp = (end - sizeof(struct hrt) + 1); + + for (fp = begin; fp <= endp; fp += 16) { + temp1 = readb(fp + SIG0); + temp2 = readb(fp + SIG1); + temp3 = readb(fp + SIG2); + temp4 = readb(fp + SIG3); + if (temp1 == '$' && + temp2 == 'H' && + temp3 == 'R' && + temp4 == 'T') { + status = 1; + break; + } + } + + if (!status) + fp = NULL; + + dbg("Discovered Hotplug Resource Table at %p\n", fp); + return fp; +} + + +int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func) +{ + unsigned char bus; + struct pci_bus *child; + int num; + + if (func->pci_dev == NULL) + func->pci_dev = pci_get_bus_and_slot(func->bus,PCI_DEVFN(func->device, func->function)); + + /* No pci device, we need to create it then */ + if (func->pci_dev == NULL) { + dbg("INFO: pci_dev still null\n"); + + num = pci_scan_slot(ctrl->pci_dev->bus, PCI_DEVFN(func->device, func->function)); + if (num) + pci_bus_add_devices(ctrl->pci_dev->bus); + + func->pci_dev = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, func->function)); + if (func->pci_dev == NULL) { + dbg("ERROR: pci_dev still null\n"); + return 0; + } + } + + if (func->pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + pci_read_config_byte(func->pci_dev, PCI_SECONDARY_BUS, &bus); + child = (struct pci_bus*) pci_add_new_bus(func->pci_dev->bus, (func->pci_dev), bus); + pci_do_scan_bus(child); + } + + pci_dev_put(func->pci_dev); + + return 0; +} + + +int cpqhp_unconfigure_device(struct pci_func* func) +{ + int j; + + dbg("%s: bus/dev/func = %x/%x/%x\n", __func__, func->bus, func->device, func->function); + + for (j=0; j<8 ; j++) { + struct pci_dev* temp = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, j)); + if (temp) { + pci_dev_put(temp); + pci_stop_and_remove_bus_device(temp); + } + } + return 0; +} + +static int PCI_RefinedAccessConfig(struct pci_bus *bus, unsigned int devfn, u8 offset, u32 *value) +{ + u32 vendID = 0; + + if (pci_bus_read_config_dword (bus, devfn, PCI_VENDOR_ID, &vendID) == -1) + return -1; + if (vendID == 0xffffffff) + return -1; + return pci_bus_read_config_dword (bus, devfn, offset, value); +} + + +/* + * cpqhp_set_irq + * + * @bus_num: bus number of PCI device + * @dev_num: device number of PCI device + * @slot: pointer to u8 where slot number will be returned + */ +int cpqhp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num) +{ + int rc = 0; + + if (cpqhp_legacy_mode) { + struct pci_dev *fakedev; + struct pci_bus *fakebus; + u16 temp_word; + + fakedev = kmalloc(sizeof(*fakedev), GFP_KERNEL); + fakebus = kmalloc(sizeof(*fakebus), GFP_KERNEL); + if (!fakedev || !fakebus) { + kfree(fakedev); + kfree(fakebus); + return -ENOMEM; + } + + fakedev->devfn = dev_num << 3; + fakedev->bus = fakebus; + fakebus->number = bus_num; + dbg("%s: dev %d, bus %d, pin %d, num %d\n", + __func__, dev_num, bus_num, int_pin, irq_num); + rc = pcibios_set_irq_routing(fakedev, int_pin - 1, irq_num); + kfree(fakedev); + kfree(fakebus); + dbg("%s: rc %d\n", __func__, rc); + if (!rc) + return !rc; + + /* set the Edge Level Control Register (ELCR) */ + temp_word = inb(0x4d0); + temp_word |= inb(0x4d1) << 8; + + temp_word |= 0x01 << irq_num; + + /* This should only be for x86 as it sets the Edge Level + * Control Register + */ + outb((u8) (temp_word & 0xFF), 0x4d0); outb((u8) ((temp_word & + 0xFF00) >> 8), 0x4d1); rc = 0; } + + return rc; +} + + +static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev_num) +{ + u16 tdevice; + u32 work; + u8 tbus; + + ctrl->pci_bus->number = bus_num; + + for (tdevice = 0; tdevice < 0xFF; tdevice++) { + /* Scan for access first */ + if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1) + continue; + dbg("Looking for nonbridge bus_num %d dev_num %d\n", bus_num, tdevice); + /* Yep we got one. Not a bridge ? */ + if ((work >> 8) != PCI_TO_PCI_BRIDGE_CLASS) { + *dev_num = tdevice; + dbg("found it !\n"); + return 0; + } + } + for (tdevice = 0; tdevice < 0xFF; tdevice++) { + /* Scan for access first */ + if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1) + continue; + dbg("Looking for bridge bus_num %d dev_num %d\n", bus_num, tdevice); + /* Yep we got one. bridge ? */ + if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) { + pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(tdevice, 0), PCI_SECONDARY_BUS, &tbus); + /* XXX: no recursion, wtf? */ + dbg("Recurse on bus_num %d tdevice %d\n", tbus, tdevice); + return 0; + } + } + + return -1; +} + + +static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot, u8 nobridge) +{ + int loop, len; + u32 work; + u8 tbus, tdevice, tslot; + + len = cpqhp_routing_table_length(); + for (loop = 0; loop < len; ++loop) { + tbus = cpqhp_routing_table->slots[loop].bus; + tdevice = cpqhp_routing_table->slots[loop].devfn; + tslot = cpqhp_routing_table->slots[loop].slot; + + if (tslot == slot) { + *bus_num = tbus; + *dev_num = tdevice; + ctrl->pci_bus->number = tbus; + pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work); + if (!nobridge || (work == 0xffffffff)) + return 0; + + dbg("bus_num %d devfn %d\n", *bus_num, *dev_num); + pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_CLASS_REVISION, &work); + dbg("work >> 8 (%x) = BRIDGE (%x)\n", work >> 8, PCI_TO_PCI_BRIDGE_CLASS); + + if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) { + pci_bus_read_config_byte (ctrl->pci_bus, *dev_num, PCI_SECONDARY_BUS, &tbus); + dbg("Scan bus for Non Bridge: bus %d\n", tbus); + if (PCI_ScanBusForNonBridge(ctrl, tbus, dev_num) == 0) { + *bus_num = tbus; + return 0; + } + } else + return 0; + } + } + return -1; +} + + +int cpqhp_get_bus_dev (struct controller *ctrl, u8 * bus_num, u8 * dev_num, u8 slot) +{ + /* plain (bridges allowed) */ + return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0); +} + + +/* More PCI configuration routines; this time centered around hotplug + * controller + */ + + +/* + * cpqhp_save_config + * + * Reads configuration for all slots in a PCI bus and saves info. + * + * Note: For non-hot plug busses, the slot # saved is the device # + * + * returns 0 if success + */ +int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) +{ + long rc; + u8 class_code; + u8 header_type; + u32 ID; + u8 secondary_bus; + struct pci_func *new_slot; + int sub_bus; + int FirstSupported; + int LastSupported; + int max_functions; + int function; + u8 DevError; + int device = 0; + int cloop = 0; + int stop_it; + int index; + + /* Decide which slots are supported */ + + if (is_hot_plug) { + /* + * is_hot_plug is the slot mask + */ + FirstSupported = is_hot_plug >> 4; + LastSupported = FirstSupported + (is_hot_plug & 0x0F) - 1; + } else { + FirstSupported = 0; + LastSupported = 0x1F; + } + + /* Save PCI configuration space for all devices in supported slots */ + ctrl->pci_bus->number = busnumber; + for (device = FirstSupported; device <= LastSupported; device++) { + ID = 0xFFFFFFFF; + rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID); + + if (ID == 0xFFFFFFFF) { + if (is_hot_plug) { + /* Setup slot structure with entry for empty + * slot + */ + new_slot = cpqhp_slot_create(busnumber); + if (new_slot == NULL) + return 1; + + new_slot->bus = (u8) busnumber; + new_slot->device = (u8) device; + new_slot->function = 0; + new_slot->is_a_board = 0; + new_slot->presence_save = 0; + new_slot->switch_save = 0; + } + continue; + } + + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code); + if (rc) + return rc; + + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type); + if (rc) + return rc; + + /* If multi-function device, set max_functions to 8 */ + if (header_type & 0x80) + max_functions = 8; + else + max_functions = 1; + + function = 0; + + do { + DevError = 0; + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* Recurse the subordinate bus + * get the subordinate bus number + */ + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus); + if (rc) { + return rc; + } else { + sub_bus = (int) secondary_bus; + + /* Save secondary bus cfg spc + * with this recursive call. + */ + rc = cpqhp_save_config(ctrl, sub_bus, 0); + if (rc) + return rc; + ctrl->pci_bus->number = busnumber; + } + } + + index = 0; + new_slot = cpqhp_slot_find(busnumber, device, index++); + while (new_slot && + (new_slot->function != (u8) function)) + new_slot = cpqhp_slot_find(busnumber, device, index++); + + if (!new_slot) { + /* Setup slot structure. */ + new_slot = cpqhp_slot_create(busnumber); + if (new_slot == NULL) + return 1; + } + + new_slot->bus = (u8) busnumber; + new_slot->device = (u8) device; + new_slot->function = (u8) function; + new_slot->is_a_board = 1; + new_slot->switch_save = 0x10; + /* In case of unsupported board */ + new_slot->status = DevError; + new_slot->pci_dev = pci_get_bus_and_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function); + + for (cloop = 0; cloop < 0x20; cloop++) { + rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop])); + if (rc) + return rc; + } + + pci_dev_put(new_slot->pci_dev); + + function++; + + stop_it = 0; + + /* this loop skips to the next present function + * reading in Class Code and Header type. + */ + while ((function < max_functions) && (!stop_it)) { + rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID); + if (ID == 0xFFFFFFFF) { + function++; + continue; + } + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code); + if (rc) + return rc; + + rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type); + if (rc) + return rc; + + stop_it++; + } + + } while (function < max_functions); + } /* End of FOR loop */ + + return 0; +} + + +/* + * cpqhp_save_slot_config + * + * Saves configuration info for all PCI devices in a given slot + * including subordinate busses. + * + * returns 0 if success + */ +int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot) +{ + long rc; + u8 class_code; + u8 header_type; + u32 ID; + u8 secondary_bus; + int sub_bus; + int max_functions; + int function = 0; + int cloop = 0; + int stop_it; + + ID = 0xFFFFFFFF; + + ctrl->pci_bus->number = new_slot->bus; + pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_VENDOR_ID, &ID); + + if (ID == 0xFFFFFFFF) + return 2; + + pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code); + pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type); + + if (header_type & 0x80) /* Multi-function device */ + max_functions = 8; + else + max_functions = 1; + + while (function < max_functions) { + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* Recurse the subordinate bus */ + pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus); + + sub_bus = (int) secondary_bus; + + /* Save the config headers for the secondary + * bus. + */ + rc = cpqhp_save_config(ctrl, sub_bus, 0); + if (rc) + return(rc); + ctrl->pci_bus->number = new_slot->bus; + + } + + new_slot->status = 0; + + for (cloop = 0; cloop < 0x20; cloop++) + pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop])); + + function++; + + stop_it = 0; + + /* this loop skips to the next present function + * reading in the Class Code and the Header type. + */ + while ((function < max_functions) && (!stop_it)) { + pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID); + + if (ID == 0xFFFFFFFF) + function++; + else { + pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code); + pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type); + stop_it++; + } + } + + } + + return 0; +} + + +/* + * cpqhp_save_base_addr_length + * + * Saves the length of all base address registers for the + * specified slot. this is for hot plug REPLACE + * + * returns 0 if success + */ +int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func) +{ + u8 cloop; + u8 header_type; + u8 secondary_bus; + u8 type; + int sub_bus; + u32 temp_register; + u32 base; + u32 rc; + struct pci_func *next; + int index = 0; + struct pci_bus *pci_bus = ctrl->pci_bus; + unsigned int devfn; + + func = cpqhp_slot_find(func->bus, func->device, index++); + + while (func != NULL) { + pci_bus->number = func->bus; + devfn = PCI_DEVFN(func->device, func->function); + + /* Check for Bridge */ + pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); + + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); + + sub_bus = (int) secondary_bus; + + next = cpqhp_slot_list[sub_bus]; + + while (next != NULL) { + rc = cpqhp_save_base_addr_length(ctrl, next); + if (rc) + return rc; + + next = next->next; + } + pci_bus->number = func->bus; + + /* FIXME: this loop is duplicated in the non-bridge + * case. The two could be rolled together Figure out + * IO and memory base lengths + */ + for (cloop = 0x10; cloop <= 0x14; cloop += 4) { + temp_register = 0xFFFFFFFF; + pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); + pci_bus_read_config_dword (pci_bus, devfn, cloop, &base); + /* If this register is implemented */ + if (base) { + if (base & 0x01L) { + /* IO base + * set base = amount of IO space + * requested + */ + base = base & 0xFFFFFFFE; + base = (~base) + 1; + + type = 1; + } else { + /* memory base */ + base = base & 0xFFFFFFF0; + base = (~base) + 1; + + type = 0; + } + } else { + base = 0x0L; + type = 0; + } + + /* Save information in slot structure */ + func->base_length[(cloop - 0x10) >> 2] = + base; + func->base_type[(cloop - 0x10) >> 2] = type; + + } /* End of base register loop */ + + } else if ((header_type & 0x7F) == 0x00) { + /* Figure out IO and memory base lengths */ + for (cloop = 0x10; cloop <= 0x24; cloop += 4) { + temp_register = 0xFFFFFFFF; + pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); + pci_bus_read_config_dword (pci_bus, devfn, cloop, &base); + + /* If this register is implemented */ + if (base) { + if (base & 0x01L) { + /* IO base + * base = amount of IO space + * requested + */ + base = base & 0xFFFFFFFE; + base = (~base) + 1; + + type = 1; + } else { + /* memory base + * base = amount of memory + * space requested + */ + base = base & 0xFFFFFFF0; + base = (~base) + 1; + + type = 0; + } + } else { + base = 0x0L; + type = 0; + } + + /* Save information in slot structure */ + func->base_length[(cloop - 0x10) >> 2] = base; + func->base_type[(cloop - 0x10) >> 2] = type; + + } /* End of base register loop */ + + } else { /* Some other unknown header type */ + } + + /* find the next device in this slot */ + func = cpqhp_slot_find(func->bus, func->device, index++); + } + + return(0); +} + + +/* + * cpqhp_save_used_resources + * + * Stores used resource information for existing boards. this is + * for boards that were in the system when this driver was loaded. + * this function is for hot plug ADD + * + * returns 0 if success + */ +int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) +{ + u8 cloop; + u8 header_type; + u8 secondary_bus; + u8 temp_byte; + u8 b_base; + u8 b_length; + u16 command; + u16 save_command; + u16 w_base; + u16 w_length; + u32 temp_register; + u32 save_base; + u32 base; + int index = 0; + struct pci_resource *mem_node; + struct pci_resource *p_mem_node; + struct pci_resource *io_node; + struct pci_resource *bus_node; + struct pci_bus *pci_bus = ctrl->pci_bus; + unsigned int devfn; + + func = cpqhp_slot_find(func->bus, func->device, index++); + + while ((func != NULL) && func->is_a_board) { + pci_bus->number = func->bus; + devfn = PCI_DEVFN(func->device, func->function); + + /* Save the command register */ + pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command); + + /* disable card */ + command = 0x00; + pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command); + + /* Check for Bridge */ + pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type); + + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* Clear Bridge Control Register */ + command = 0x00; + pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command); + pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); + pci_bus_read_config_byte(pci_bus, devfn, PCI_SUBORDINATE_BUS, &temp_byte); + + bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL); + if (!bus_node) + return -ENOMEM; + + bus_node->base = secondary_bus; + bus_node->length = temp_byte - secondary_bus + 1; + + bus_node->next = func->bus_head; + func->bus_head = bus_node; + + /* Save IO base and Limit registers */ + pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &b_base); + pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &b_length); + + if ((b_base <= b_length) && (save_command & 0x01)) { + io_node = kmalloc(sizeof(*io_node), GFP_KERNEL); + if (!io_node) + return -ENOMEM; + + io_node->base = (b_base & 0xF0) << 8; + io_node->length = (b_length - b_base + 0x10) << 8; + + io_node->next = func->io_head; + func->io_head = io_node; + } + + /* Save memory base and Limit registers */ + pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base); + pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length); + + if ((w_base <= w_length) && (save_command & 0x02)) { + mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL); + if (!mem_node) + return -ENOMEM; + + mem_node->base = w_base << 16; + mem_node->length = (w_length - w_base + 0x10) << 16; + + mem_node->next = func->mem_head; + func->mem_head = mem_node; + } + + /* Save prefetchable memory base and Limit registers */ + pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base); + pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length); + + if ((w_base <= w_length) && (save_command & 0x02)) { + p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL); + if (!p_mem_node) + return -ENOMEM; + + p_mem_node->base = w_base << 16; + p_mem_node->length = (w_length - w_base + 0x10) << 16; + + p_mem_node->next = func->p_mem_head; + func->p_mem_head = p_mem_node; + } + /* Figure out IO and memory base lengths */ + for (cloop = 0x10; cloop <= 0x14; cloop += 4) { + pci_bus_read_config_dword (pci_bus, devfn, cloop, &save_base); + + temp_register = 0xFFFFFFFF; + pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register); + pci_bus_read_config_dword(pci_bus, devfn, cloop, &base); + + temp_register = base; + + /* If this register is implemented */ + if (base) { + if (((base & 0x03L) == 0x01) + && (save_command & 0x01)) { + /* IO base + * set temp_register = amount + * of IO space requested + */ + temp_register = base & 0xFFFFFFFE; + temp_register = (~temp_register) + 1; + + io_node = kmalloc(sizeof(*io_node), + GFP_KERNEL); + if (!io_node) + return -ENOMEM; + + io_node->base = + save_base & (~0x03L); + io_node->length = temp_register; + + io_node->next = func->io_head; + func->io_head = io_node; + } else + if (((base & 0x0BL) == 0x08) + && (save_command & 0x02)) { + /* prefetchable memory base */ + temp_register = base & 0xFFFFFFF0; + temp_register = (~temp_register) + 1; + + p_mem_node = kmalloc(sizeof(*p_mem_node), + GFP_KERNEL); + if (!p_mem_node) + return -ENOMEM; + + p_mem_node->base = save_base & (~0x0FL); + p_mem_node->length = temp_register; + + p_mem_node->next = func->p_mem_head; + func->p_mem_head = p_mem_node; + } else + if (((base & 0x0BL) == 0x00) + && (save_command & 0x02)) { + /* prefetchable memory base */ + temp_register = base & 0xFFFFFFF0; + temp_register = (~temp_register) + 1; + + mem_node = kmalloc(sizeof(*mem_node), + GFP_KERNEL); + if (!mem_node) + return -ENOMEM; + + mem_node->base = save_base & (~0x0FL); + mem_node->length = temp_register; + + mem_node->next = func->mem_head; + func->mem_head = mem_node; + } else + return(1); + } + } /* End of base register loop */ + /* Standard header */ + } else if ((header_type & 0x7F) == 0x00) { + /* Figure out IO and memory base lengths */ + for (cloop = 0x10; cloop <= 0x24; cloop += 4) { + pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base); + + temp_register = 0xFFFFFFFF; + pci_bus_write_config_dword(pci_bus, devfn, cloop, temp_register); + pci_bus_read_config_dword(pci_bus, devfn, cloop, &base); + + temp_register = base; + + /* If this register is implemented */ + if (base) { + if (((base & 0x03L) == 0x01) + && (save_command & 0x01)) { + /* IO base + * set temp_register = amount + * of IO space requested + */ + temp_register = base & 0xFFFFFFFE; + temp_register = (~temp_register) + 1; + + io_node = kmalloc(sizeof(*io_node), + GFP_KERNEL); + if (!io_node) + return -ENOMEM; + + io_node->base = save_base & (~0x01L); + io_node->length = temp_register; + + io_node->next = func->io_head; + func->io_head = io_node; + } else + if (((base & 0x0BL) == 0x08) + && (save_command & 0x02)) { + /* prefetchable memory base */ + temp_register = base & 0xFFFFFFF0; + temp_register = (~temp_register) + 1; + + p_mem_node = kmalloc(sizeof(*p_mem_node), + GFP_KERNEL); + if (!p_mem_node) + return -ENOMEM; + + p_mem_node->base = save_base & (~0x0FL); + p_mem_node->length = temp_register; + + p_mem_node->next = func->p_mem_head; + func->p_mem_head = p_mem_node; + } else + if (((base & 0x0BL) == 0x00) + && (save_command & 0x02)) { + /* prefetchable memory base */ + temp_register = base & 0xFFFFFFF0; + temp_register = (~temp_register) + 1; + + mem_node = kmalloc(sizeof(*mem_node), + GFP_KERNEL); + if (!mem_node) + return -ENOMEM; + + mem_node->base = save_base & (~0x0FL); + mem_node->length = temp_register; + + mem_node->next = func->mem_head; + func->mem_head = mem_node; + } else + return(1); + } + } /* End of base register loop */ + } + + /* find the next device in this slot */ + func = cpqhp_slot_find(func->bus, func->device, index++); + } + + return 0; +} + + +/* + * cpqhp_configure_board + * + * Copies saved configuration information to one slot. + * this is called recursively for bridge devices. + * this is for hot plug REPLACE! + * + * returns 0 if success + */ +int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func) +{ + int cloop; + u8 header_type; + u8 secondary_bus; + int sub_bus; + struct pci_func *next; + u32 temp; + u32 rc; + int index = 0; + struct pci_bus *pci_bus = ctrl->pci_bus; + unsigned int devfn; + + func = cpqhp_slot_find(func->bus, func->device, index++); + + while (func != NULL) { + pci_bus->number = func->bus; + devfn = PCI_DEVFN(func->device, func->function); + + /* Start at the top of config space so that the control + * registers are programmed last + */ + for (cloop = 0x3C; cloop > 0; cloop -= 4) + pci_bus_write_config_dword (pci_bus, devfn, cloop, func->config_space[cloop >> 2]); + + pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); + + /* If this is a bridge device, restore subordinate devices */ + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); + + sub_bus = (int) secondary_bus; + + next = cpqhp_slot_list[sub_bus]; + + while (next != NULL) { + rc = cpqhp_configure_board(ctrl, next); + if (rc) + return rc; + + next = next->next; + } + } else { + + /* Check all the base Address Registers to make sure + * they are the same. If not, the board is different. + */ + + for (cloop = 16; cloop < 40; cloop += 4) { + pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp); + + if (temp != func->config_space[cloop >> 2]) { + dbg("Config space compare failure!!! offset = %x\n", cloop); + dbg("bus = %x, device = %x, function = %x\n", func->bus, func->device, func->function); + dbg("temp = %x, config space = %x\n\n", temp, func->config_space[cloop >> 2]); + return 1; + } + } + } + + func->configured = 1; + + func = cpqhp_slot_find(func->bus, func->device, index++); + } + + return 0; +} + + +/* + * cpqhp_valid_replace + * + * this function checks to see if a board is the same as the + * one it is replacing. this check will detect if the device's + * vendor or device id's are the same + * + * returns 0 if the board is the same nonzero otherwise + */ +int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func) +{ + u8 cloop; + u8 header_type; + u8 secondary_bus; + u8 type; + u32 temp_register = 0; + u32 base; + u32 rc; + struct pci_func *next; + int index = 0; + struct pci_bus *pci_bus = ctrl->pci_bus; + unsigned int devfn; + + if (!func->is_a_board) + return(ADD_NOT_SUPPORTED); + + func = cpqhp_slot_find(func->bus, func->device, index++); + + while (func != NULL) { + pci_bus->number = func->bus; + devfn = PCI_DEVFN(func->device, func->function); + + pci_bus_read_config_dword (pci_bus, devfn, PCI_VENDOR_ID, &temp_register); + + /* No adapter present */ + if (temp_register == 0xFFFFFFFF) + return(NO_ADAPTER_PRESENT); + + if (temp_register != func->config_space[0]) + return(ADAPTER_NOT_SAME); + + /* Check for same revision number and class code */ + pci_bus_read_config_dword (pci_bus, devfn, PCI_CLASS_REVISION, &temp_register); + + /* Adapter not the same */ + if (temp_register != func->config_space[0x08 >> 2]) + return(ADAPTER_NOT_SAME); + + /* Check for Bridge */ + pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); + + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* In order to continue checking, we must program the + * bus registers in the bridge to respond to accesses + * for its subordinate bus(es) + */ + + temp_register = func->config_space[0x18 >> 2]; + pci_bus_write_config_dword (pci_bus, devfn, PCI_PRIMARY_BUS, temp_register); + + secondary_bus = (temp_register >> 8) & 0xFF; + + next = cpqhp_slot_list[secondary_bus]; + + while (next != NULL) { + rc = cpqhp_valid_replace(ctrl, next); + if (rc) + return rc; + + next = next->next; + } + + } + /* Check to see if it is a standard config header */ + else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) { + /* Check subsystem vendor and ID */ + pci_bus_read_config_dword (pci_bus, devfn, PCI_SUBSYSTEM_VENDOR_ID, &temp_register); + + if (temp_register != func->config_space[0x2C >> 2]) { + /* If it's a SMART-2 and the register isn't + * filled in, ignore the difference because + * they just have an old rev of the firmware + */ + if (!((func->config_space[0] == 0xAE100E11) + && (temp_register == 0x00L))) + return(ADAPTER_NOT_SAME); + } + /* Figure out IO and memory base lengths */ + for (cloop = 0x10; cloop <= 0x24; cloop += 4) { + temp_register = 0xFFFFFFFF; + pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); + pci_bus_read_config_dword (pci_bus, devfn, cloop, &base); + + /* If this register is implemented */ + if (base) { + if (base & 0x01L) { + /* IO base + * set base = amount of IO + * space requested + */ + base = base & 0xFFFFFFFE; + base = (~base) + 1; + + type = 1; + } else { + /* memory base */ + base = base & 0xFFFFFFF0; + base = (~base) + 1; + + type = 0; + } + } else { + base = 0x0L; + type = 0; + } + + /* Check information in slot structure */ + if (func->base_length[(cloop - 0x10) >> 2] != base) + return(ADAPTER_NOT_SAME); + + if (func->base_type[(cloop - 0x10) >> 2] != type) + return(ADAPTER_NOT_SAME); + + } /* End of base register loop */ + + } /* End of (type 0 config space) else */ + else { + /* this is not a type 0 or 1 config space header so + * we don't know how to do it + */ + return(DEVICE_TYPE_NOT_SUPPORTED); + } + + /* Get the next function */ + func = cpqhp_slot_find(func->bus, func->device, index++); + } + + + return 0; +} + + +/* + * cpqhp_find_available_resources + * + * Finds available memory, IO, and IRQ resources for programming + * devices which may be added to the system + * this function is for hot plug ADD! + * + * returns 0 if success + */ +int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_start) +{ + u8 temp; + u8 populated_slot; + u8 bridged_slot; + void __iomem *one_slot; + void __iomem *rom_resource_table; + struct pci_func *func = NULL; + int i = 10, index; + u32 temp_dword, rc; + struct pci_resource *mem_node; + struct pci_resource *p_mem_node; + struct pci_resource *io_node; + struct pci_resource *bus_node; + + rom_resource_table = detect_HRT_floating_pointer(rom_start, rom_start+0xffff); + dbg("rom_resource_table = %p\n", rom_resource_table); + + if (rom_resource_table == NULL) + return -ENODEV; + + /* Sum all resources and setup resource maps */ + unused_IRQ = readl(rom_resource_table + UNUSED_IRQ); + dbg("unused_IRQ = %x\n", unused_IRQ); + + temp = 0; + while (unused_IRQ) { + if (unused_IRQ & 1) { + cpqhp_disk_irq = temp; + break; + } + unused_IRQ = unused_IRQ >> 1; + temp++; + } + + dbg("cpqhp_disk_irq= %d\n", cpqhp_disk_irq); + unused_IRQ = unused_IRQ >> 1; + temp++; + + while (unused_IRQ) { + if (unused_IRQ & 1) { + cpqhp_nic_irq = temp; + break; + } + unused_IRQ = unused_IRQ >> 1; + temp++; + } + + dbg("cpqhp_nic_irq= %d\n", cpqhp_nic_irq); + unused_IRQ = readl(rom_resource_table + PCIIRQ); + + temp = 0; + + if (!cpqhp_nic_irq) + cpqhp_nic_irq = ctrl->cfgspc_irq; + + if (!cpqhp_disk_irq) + cpqhp_disk_irq = ctrl->cfgspc_irq; + + dbg("cpqhp_disk_irq, cpqhp_nic_irq= %d, %d\n", cpqhp_disk_irq, cpqhp_nic_irq); + + rc = compaq_nvram_load(rom_start, ctrl); + if (rc) + return rc; + + one_slot = rom_resource_table + sizeof (struct hrt); + + i = readb(rom_resource_table + NUMBER_OF_ENTRIES); + dbg("number_of_entries = %d\n", i); + + if (!readb(one_slot + SECONDARY_BUS)) + return 1; + + dbg("dev|IO base|length|Mem base|length|Pre base|length|PB SB MB\n"); + + while (i && readb(one_slot + SECONDARY_BUS)) { + u8 dev_func = readb(one_slot + DEV_FUNC); + u8 primary_bus = readb(one_slot + PRIMARY_BUS); + u8 secondary_bus = readb(one_slot + SECONDARY_BUS); + u8 max_bus = readb(one_slot + MAX_BUS); + u16 io_base = readw(one_slot + IO_BASE); + u16 io_length = readw(one_slot + IO_LENGTH); + u16 mem_base = readw(one_slot + MEM_BASE); + u16 mem_length = readw(one_slot + MEM_LENGTH); + u16 pre_mem_base = readw(one_slot + PRE_MEM_BASE); + u16 pre_mem_length = readw(one_slot + PRE_MEM_LENGTH); + + dbg("%2.2x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x | %4.4x |%2.2x %2.2x %2.2x\n", + dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length, + primary_bus, secondary_bus, max_bus); + + /* If this entry isn't for our controller's bus, ignore it */ + if (primary_bus != ctrl->bus) { + i--; + one_slot += sizeof (struct slot_rt); + continue; + } + /* find out if this entry is for an occupied slot */ + ctrl->pci_bus->number = primary_bus; + pci_bus_read_config_dword (ctrl->pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword); + dbg("temp_D_word = %x\n", temp_dword); + + if (temp_dword != 0xFFFFFFFF) { + index = 0; + func = cpqhp_slot_find(primary_bus, dev_func >> 3, 0); + + while (func && (func->function != (dev_func & 0x07))) { + dbg("func = %p (bus, dev, fun) = (%d, %d, %d)\n", func, primary_bus, dev_func >> 3, index); + func = cpqhp_slot_find(primary_bus, dev_func >> 3, index++); + } + + /* If we can't find a match, skip this table entry */ + if (!func) { + i--; + one_slot += sizeof (struct slot_rt); + continue; + } + /* this may not work and shouldn't be used */ + if (secondary_bus != primary_bus) + bridged_slot = 1; + else + bridged_slot = 0; + + populated_slot = 1; + } else { + populated_slot = 0; + bridged_slot = 0; + } + + + /* If we've got a valid IO base, use it */ + + temp_dword = io_base + io_length; + + if ((io_base) && (temp_dword < 0x10000)) { + io_node = kmalloc(sizeof(*io_node), GFP_KERNEL); + if (!io_node) + return -ENOMEM; + + io_node->base = io_base; + io_node->length = io_length; + + dbg("found io_node(base, length) = %x, %x\n", + io_node->base, io_node->length); + dbg("populated slot =%d \n", populated_slot); + if (!populated_slot) { + io_node->next = ctrl->io_head; + ctrl->io_head = io_node; + } else { + io_node->next = func->io_head; + func->io_head = io_node; + } + } + + /* If we've got a valid memory base, use it */ + temp_dword = mem_base + mem_length; + if ((mem_base) && (temp_dword < 0x10000)) { + mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL); + if (!mem_node) + return -ENOMEM; + + mem_node->base = mem_base << 16; + + mem_node->length = mem_length << 16; + + dbg("found mem_node(base, length) = %x, %x\n", + mem_node->base, mem_node->length); + dbg("populated slot =%d \n", populated_slot); + if (!populated_slot) { + mem_node->next = ctrl->mem_head; + ctrl->mem_head = mem_node; + } else { + mem_node->next = func->mem_head; + func->mem_head = mem_node; + } + } + + /* If we've got a valid prefetchable memory base, and + * the base + length isn't greater than 0xFFFF + */ + temp_dword = pre_mem_base + pre_mem_length; + if ((pre_mem_base) && (temp_dword < 0x10000)) { + p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL); + if (!p_mem_node) + return -ENOMEM; + + p_mem_node->base = pre_mem_base << 16; + + p_mem_node->length = pre_mem_length << 16; + dbg("found p_mem_node(base, length) = %x, %x\n", + p_mem_node->base, p_mem_node->length); + dbg("populated slot =%d \n", populated_slot); + + if (!populated_slot) { + p_mem_node->next = ctrl->p_mem_head; + ctrl->p_mem_head = p_mem_node; + } else { + p_mem_node->next = func->p_mem_head; + func->p_mem_head = p_mem_node; + } + } + + /* If we've got a valid bus number, use it + * The second condition is to ignore bus numbers on + * populated slots that don't have PCI-PCI bridges + */ + if (secondary_bus && (secondary_bus != primary_bus)) { + bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL); + if (!bus_node) + return -ENOMEM; + + bus_node->base = secondary_bus; + bus_node->length = max_bus - secondary_bus + 1; + dbg("found bus_node(base, length) = %x, %x\n", + bus_node->base, bus_node->length); + dbg("populated slot =%d \n", populated_slot); + if (!populated_slot) { + bus_node->next = ctrl->bus_head; + ctrl->bus_head = bus_node; + } else { + bus_node->next = func->bus_head; + func->bus_head = bus_node; + } + } + + i--; + one_slot += sizeof (struct slot_rt); + } + + /* If all of the following fail, we don't have any resources for + * hot plug add + */ + rc = 1; + rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head)); + rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head)); + rc &= cpqhp_resource_sort_and_combine(&(ctrl->io_head)); + rc &= cpqhp_resource_sort_and_combine(&(ctrl->bus_head)); + + return rc; +} + + +/* + * cpqhp_return_board_resources + * + * this routine returns all resources allocated to a board to + * the available pool. + * + * returns 0 if success + */ +int cpqhp_return_board_resources(struct pci_func * func, struct resource_lists * resources) +{ + int rc = 0; + struct pci_resource *node; + struct pci_resource *t_node; + dbg("%s\n", __func__); + + if (!func) + return 1; + + node = func->io_head; + func->io_head = NULL; + while (node) { + t_node = node->next; + return_resource(&(resources->io_head), node); + node = t_node; + } + + node = func->mem_head; + func->mem_head = NULL; + while (node) { + t_node = node->next; + return_resource(&(resources->mem_head), node); + node = t_node; + } + + node = func->p_mem_head; + func->p_mem_head = NULL; + while (node) { + t_node = node->next; + return_resource(&(resources->p_mem_head), node); + node = t_node; + } + + node = func->bus_head; + func->bus_head = NULL; + while (node) { + t_node = node->next; + return_resource(&(resources->bus_head), node); + node = t_node; + } + + rc |= cpqhp_resource_sort_and_combine(&(resources->mem_head)); + rc |= cpqhp_resource_sort_and_combine(&(resources->p_mem_head)); + rc |= cpqhp_resource_sort_and_combine(&(resources->io_head)); + rc |= cpqhp_resource_sort_and_combine(&(resources->bus_head)); + + return rc; +} + + +/* + * cpqhp_destroy_resource_list + * + * Puts node back in the resource list pointed to by head + */ +void cpqhp_destroy_resource_list (struct resource_lists * resources) +{ + struct pci_resource *res, *tres; + + res = resources->io_head; + resources->io_head = NULL; + + while (res) { + tres = res; + res = res->next; + kfree(tres); + } + + res = resources->mem_head; + resources->mem_head = NULL; + + while (res) { + tres = res; + res = res->next; + kfree(tres); + } + + res = resources->p_mem_head; + resources->p_mem_head = NULL; + + while (res) { + tres = res; + res = res->next; + kfree(tres); + } + + res = resources->bus_head; + resources->bus_head = NULL; + + while (res) { + tres = res; + res = res->next; + kfree(tres); + } +} + + +/* + * cpqhp_destroy_board_resources + * + * Puts node back in the resource list pointed to by head + */ +void cpqhp_destroy_board_resources (struct pci_func * func) +{ + struct pci_resource *res, *tres; + + res = func->io_head; + func->io_head = NULL; + + while (res) { + tres = res; + res = res->next; + kfree(tres); + } + + res = func->mem_head; + func->mem_head = NULL; + + while (res) { + tres = res; + res = res->next; + kfree(tres); + } + + res = func->p_mem_head; + func->p_mem_head = NULL; + + while (res) { + tres = res; + res = res->next; + kfree(tres); + } + + res = func->bus_head; + func->bus_head = NULL; + + while (res) { + tres = res; + res = res->next; + kfree(tres); + } +} + |